Tender For Special Repairs To Bldg No. Et-40 At Trg Bn (Aps) Dighi Complex Under Age B/R-Ii In Ge (Central) Khadki.
Tender Value
14.60 Lakhs
Estimated cost
Bid Submission
07 Nov 2026
13 days left
EMD
29200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To Bldg No. Et-40 At Trg Bn (Aps) Dighi Complex Under Age B/R-Ii In Ge (Central) Khadki.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of wall and ceiling boards (fibre,pulp insulation, Ac etc), any thickness including cover fillets complete all as specified and as directed. |
| 2 | Supply and fix interlocking aluminium alloy anodised snap grid consists of main Tee runners of size 38mm x25mm x1.5mm spaced 1200mm centre to centre and cross Tee of size 25mmx25mmx 1.5mm, 1200mm long spaced between the main Tee at 600mm centre to centre to form a grid of 1200mmx600mm and provide a secondary cross tee 25mm x1.4mm ( of length 600mm) to be interlocked of the centre of 1200mmx600mm panel to form a grid of 605mmx605mm and wall angle 25mmx25mmx 2mm. Aluminium alloy extruded section shall be aluminium anodised (minimum 15 micron ) and shall conform to IS 733, IS 1285 and IS 737. including Hangers of GI wire 6mm dia to be fixed by approved rawl plug, level adjusters and screws etc complete all as specified and as directed. |
| 3 | Material and labour for 8-9 mm thick Gypsum board/tiles for insulation and accoustic purposes, 60cmx60cm in size , fixed with nails to timber frame work or with staples on snap grid in ceiling complete all as specified and as directed. |
| 4 | Dismantling of floor hearth or wall tiling including cm bedding (but not backing) removing serviceable tiles in store rubbish of the premises complete all as specified and as directed. |
| 5 | Material and labour for ceramic coloured tiles 10 mm thick light shade, (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed in CM (1:6) complete all as specified and as directed. |
| 6 | Material and labour for ceramic coloured tiles in vertical/skirting surface 10 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster (1:4) as backing coat complete all as specified and as directed. |
| 7 | Material and labour for 25 mm thick Cement concrete in level course for receiving floor tiles using Type B1,1:2:4 (20 mm graded aggregate) complete all as specified and as directed. |
| 8 | Demolition of stone slabs/flooring of any description laid bedded and pointed any mortar and all as directed. |
| 9 | Material and labour for granite slab machine cut for 20 mm thick bedded and jointed with colour cement to match cut to shape required all as specified and directed including Material and labour for screed bed or bedding layer 15 mm thick in cement mortar (1:6) for laying floor finishes. complete all as specified and as directed. |
| 10 | Taking down cement plaster on wall /concrete surface etc including racking out joints hacking for key scrubing down with water etc all as specified and as directed. |
| 11 | Rendering 15 mm thick on faces of brick/ PCC block masonry wall using cement plaster 1:4 and rendering is to be finished even and smooth (without using extra cement) complete all as specified and as directed. |
| 12 | Material and labour for preparing new plastered and applying two coat of cement based paint (any tint) over a coat of primer on walls complete all as specified and directed. |
| 13 | Supply and fix for powder coated aluminium sliding windows having three Nos of tracks including one gauzed shutter for mosquito proofing including stainless steel wire cloth of 0.63 mm nominal dia and average aperature 1.4 mm and two Nos of glazed shutters including 4mm thick plain sheet glass and minimum 1.2 mm wall thickness including shutters,interlocks,EPDM gaskets with necessary cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, suitable handles, locking arrangement and fixed to stone masonary wall complete including dismantling of old window of any type complete all as specified and directed by Engr-In-Charge.Frame Section as below:-Bottom member (21446) : 91x31.75mmSide & Top (21447) : 91x31.75mm |
| 14 | Material and labour in repair for Framed work such as grills etc with ends of bar shouldered or revetted or forged into spikes framed guard bars including framed flat iron of any size and section to combined the windows all as specified and as directed. |
| 15 | Material and labour for two coats of synthetic enamel paint over a coat of redoxide primer on newly steel surfaces including all necessary preparation over 10 cms width or girth all as specified and as directed. |
| 16 | Complete removal of existing treatment and Material and labour for applying 1mm thick layer wall care putty and applying two coats of oil bound distemper on walls all as specified and as directed. |
| 17 | Taking down aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials deposited in store for keeping in safe custody and making good disturbed surfaces of walls, floors etc. all as specified. |
| 18 | Material and labour for point wiring using approved colour coding as per IS (For phase and neutral), with stranded copper conductor 1.5 Sqmm (nominal area), single core, multistranded, FRLS, PVC insulated and unsheathed cable 1100 volts grade, ISI 694 marked drawn in and including heavy duty PVC concealed conduit with fittings ISI marked, terminated in junction box incl 1.5 Sqmm (Nominal area) single core, multistranded, FRLS, PVC insulated and unsheathed cable as earth continuity conductor to common earth and connected to earth dolly complete all as specified and as directed. |
| 19 | One light point controlled by one switch/one fan point controlled by one switch & fan regulator. |
| 20 | One socket outlet three pin, 5 Amps on the same board. |
| 21 | One socket outlet three pin, 5 Amps, independent. |
| 22 | Material and labour for point wiring using approved colour coding as per IS (For phase and neutral), with stranded copper conductor 2.5 Sqmm (nominal area), single core, multistranded, FRLS, PVC insulated and unsheathed cable 1100 volts grade, ISI 694 marked drawn in and including heavy duty PVC concealed conduit with fittings ISI marked, terminated in junction box incl 2.5 Sqmm (Nominal area) single core cable as earth continuity conductor to common earth and connected to earth dolly complete for one power point 16 Amps all as specified and as directed. Please Enable Macros to View BoQ information |
| 23 | Material and labour for point wiring using approved colour coding as per IS (For phase and neutral), with stranded copper conductor 2.5 Sqmm (nominal area), single core, multistranded, FRLS, PVC insulated and unsheathed cable 1100 volts grade, ISI 694 marked drawn in and including heavy duty PVC concealed conduit with fittings ISI marked, terminated in junction box incl 2.5 Sqmm (Nominal area) single core cable as earth continuity conductor to common earth and connected to earth dolly complete for one power point 16 Amps all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender