Tender For Providing Of Weather Shed And Associated Works At Various Locations At Afs Under Ge (Af) Jorhat
Tender Value
Ref. Documents
Estimated cost
Bid Submission
06 Nov 2026
9 days left
EMD
87360
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jorhat → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of Weather Shed And Associated Works At Various Locations At Afs Under Ge (Af) Jorhat
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches n. exc.1.5m wide and n. exc. 1.5m in depth; for foundation, shafts, wells, cesspits, manholes, pier holes, etc. n. exc 10sqm on plan and n. exc. 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 2 | All as per Serial item No. 1 here-in-before but for eachadditional 1.5m or part thereof in depth beyond thefirst 1.5m. |
| 3 | Materials and labour for hardcore of gauge n. exc. 63 mm deposited, spread and levelled in layers n. exc. 15cm thick, watered and rammed to a true surface with broken stone or boulders complete all as specified and directed. |
| 4 | Materials and labour for plain cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed. |
| 5 | Materials and labour for reinforced cement concrete, M-30 (Design Mix) as in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. |
| 6 | Materials and labour for reinforced cement concrete, M-30 (Design Mix) as in columns, pillars, piers, posts and struts complete all as specified and as directed. |
| 7 | Materials and labour for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed. |
| 8 | All as per Serial item No. 7 here-in-before but of 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders. |
| 9 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces of concrete flat complete all as specified and as directed. |
| 10 | Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchion, etc. for rough finished surfaces of concrete complete all as specified and as directed. |
| 11 | Supply and fix mild steel bolts diameter of neck exc. 20mm but n. exc. 25mm, purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long complete all as specified and as directed. |
| 12 | Supply and fix mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment or gusset plate of Fe-410-W (Gde-E-250 quality B) complete all as specified and as directed. |
| 13 | Supply and fix Structural Steel work in hollow tubular sectiion (RHS or SHS) including special shaped washer etc., complete using ERW or induction butt welded tubes used as perlin, rafter & post etc conforming to IS 4923 grade Yst 310 complete all as specified and as directed. |
| 14 | Materials and labour for preparation of new steel or iron surfaces of any description over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 15 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 250mm complete all as specified and as directed. |
| 16 | Removing excavated material (soil) to a distance n. exc. 50m and depositing where directed at a level n. exc 1.5m complete all as specified and as directed. |
| 17 | Materials and labour for rendering 15mm thick cement plaster in cement mortar (1:4) on fair faces of brick work or concrete surface of wall, surface finished even and smooth without using extra cement complete all as specified and as directed. |
| 18 | Materials and labour for preparation of new plastered surfaces of any description and applying two coats of cement base paint over one coat of primer complete all as specified and as directed. |
| 19 | Supply and fix Pre- painted Galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as per specified and as directed. |
| 20 | Supply and fix Pre- painted Galvalume aluminum zinc coated GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as per specified and as directed. |
| 21 | Supply and fix 0.63mm plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed. |
| 22 | Materials and labour for brickwork (old size) with sub class ‘B’ bricks, straight or curved on plan, exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed. |
| 23 | Materials and labour for brickwork (old size) with sub class ‘B’ bricks, straight or curved on plan of any radius in half brick thick walls, built in cement mortar (1:4) complete all as specified and as directed. |
| 24 | Materials and labour for plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in bands, copings, etc. including necessary formwork complete all as specified and as directed. |
| 25 | Materials and labour for 75mm thick plain cement concrete (1:2:4) type B-2 (using 40mm graded stone aggregate) as in floorings complete all as specified and as directed. |
| 26 | Materials and labour for 25mm sand filling under floor or in foundations including watering and consolidation complete all as specified and as directed. |
| 27 | Materials and labour for machine pressed precast concrete interlocking paver block of any shape and size confirming to IS : 15658-2006 of 60mm thickness, M-35 Grade complete all as specified and as directed |
| 28 | Materials and labour for 50mm thick PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection, finishing cement concrete surfaces even & smooth without using extra cement complete all as specified and as directed. |
| 29 | Materials and labour for endura rustic tiles of size 300x300x10mm thick as in floor, etc., set and jointed in neat cement slurry and pointed in white or colured cement to match over and including 20mm thick screed bedding layer in cement mortar (1:6) complete all as specified and as directed. |
| 30 | Supply and fix 20mm bore GI tubing, \\"medium grade\\", with all fitting and fixed complete to walls & ceiling or laid in floors complete all as specified and as directed. |
| 31 | Supply and fix 15mm bore GI tubing, \\"medium grade\\", with all fitting and fixed complete to walls & ceiling or laid in floors complete all as specified and as directed. |
| 32 | Supply and fix for 15mm bib taps, cast copper alloy, fancy type, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 33 | Materials and labour for RCC (1:2:4) type B-1 (using 20mm graded stone agregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 34 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (horizontal or sloping) and making flat rough finished surfaces of concrete complete all as specified and as directed. |
| 35 | Materials and labour for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including screed bed or bedding layer 15mm thick in cement mortar (1:6) complete all as specified and as directed. |
| 36 | Supply and fix sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mmx420mm bowl size 410mmx330mmx160mm complete all as specified and as directed. |
| 37 | Materials and labour for machine cut kota stone slab flooring, 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 38 | Materials and labour for machine cut kota stone slab flooring, 20-25mm thick as on riser of steps, skirting, dado and pillar, etc. laid over and and jointed over and including 10mm thick screed bed/bedding in cement mortar (1:4) complete all as specified and as directed. |
| 39 | Materials and labour for glazed ceramic coloured tiles as on vertical surfaces of size, 300x200x7mm/450x300x7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed bed/bedding in cement mortar (1:4) complete all as specified and as directed. |
| 40 | Supply and fix pressed steel frames of size 105mmx60mm, made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate, etc. complete all as specified and as directed. |
| 41 | Supply and fix 35mm thick factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed. |
| 42 | Supply and fix 30mm thick flush shutters, solid core construction with block boards core and plywood face panels, commercial type on both sides with application of decorative laminate of approved colour and pattern complete all as specified and as directed. |
| 43 | Materials and labour for preparation of new wooden surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over and including one coat of pink primer complete all as specified and as directed. |
| 44 | Supply and fix 200mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed. |
| 45 | Supply and fix 150mm size extruded aluminium alloy handles, cast type, anodised complete all as specified and as directed. |
| 46 | Supply and fix 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed. |
| 47 | Cutting holes in brick walls in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as required depth of embedded portion of holdfasts, exc. half brick and not exc. one brick thick complete all as specified and as directed |
| 48 | Supply and fix for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55mm thick with two unequal flanges of 20mm and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and as directed. |
| 49 | Materials and labour for 6mm perforated particle board/tiles for insulation and accoustic purposes of size 60x60cm, fixed with screws to timber framework or with staples on snap grid complete all as specified and as directed. |
| 50 | Materials and labour for 2nd class hard wood timber scantlings, clean sawn complete all as specified and as directed. |
| 51 | Supply and fix stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples as in new door/windows complete all as specified and as directed. |
| 52 | Materials and labour for non skid ceramic coloured tiles, 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid, over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 53 | Materials and labour for plain cement concrete (1:2:4) type B-0 (using 12.50mm graded stone aggregate) used as in sides of paver block, path, rounded or chamfered on edges complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender