Tender For Special Repair To Qtr No. Kb 517 And Kb 518 At Katari Bagh, Naval Base Kochi Under Ge(Nw) Kochi
Tender Value
47.70 Lakhs
Estimated cost
Bid Submission
06 Nov 2026
5 days left
EMD
95400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Qtr No. Kb 517 And Kb 518 At Katari Bagh, Naval Base Kochi Under Ge(Nw) Kochi
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick/concrete wall and ceiling surfaces including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed by Engineer-in-Charge. |
| 2 | M&L for rendering 15 mm thick in CM 1:4 with approved water proofing compound on fair surfaces of brick work or concrete surfaces, finished even and smooth complete all as specified and as directed by Engineer-in-Charge. |
| 3 | M&L for 5 mm thick rendering in cement mortar 1:3 on fair faces of of ceiling surfaces finished even and smooth complete all as specified and as directed by Engineer-in-Charge. |
| 4 | M&L for rendering 10mm thick on brick or concret wall surfaces with cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 5 | M&L for liquid water proofing compound complete all as specified and as directed by Engineer-in-Charge. |
| 6 | M&L for complete removal of existing treatment from wall surfaces complete all as specified and as directed by Engineer-in-Charge. |
| 7 | M&L for preparation of newly plastered surfaces and applying two or more coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification over a coat of alkali resistant priming paint and including application of 3mm thick wall care putty complete all as specified and as directed by Engineer-in-Charge. |
| 8 | M&L for preparation of newly plastered surfaces and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed by Engineer-in-Charge. |
| 9 | M&L for preparation of newly decorated surfaces of ceiling and applying three coat of white wash complete all as specified and as directed by Engineer-in-Charge. |
| 10 | M&L for preparation of newly decorated wall surfaces and applying three coat of white wash complete all as specified and as directed by Engineer-in-Charge. |
| 11 | M&L for preparation of old decorated surfaces of walls including cornicesand applying two coat of white wash complete all as specified and as directed by Engineer-in-Charge. |
| 12 | M&L for preparation of old decorated surfaces of ceiling including cornices and applying two coat of white wash complete all as specified and as directed by Engineer-in-Charge. |
| 13 | M&L for preperation of old painted wooden surfaces of any description exc. 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. |
| 14 | M&L for preperation of old painted steel surfaces of any description over 10cm width or girth and applying one finishing coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. |
| 15 | M&L for writing letters of figures (BLOCK, ROMAN, ITALIAN OR INDIAN) n. exc 30cm high complete all as specified and as directed by Engineer-in-Charge. Note : Writing shall be done with thick paint so that they stand out boldly. |
| 16 | Taking down chowkats with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm complete all as specified and as directed by Engineer-in-Charge. |
| 17 | Taking down chowkats with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm complete all as specified and as directed by Engineer-in-Charge. |
| 18 | Taking down shutter and removing to store exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed by Engineer-in-Charge. |
| 19 | M&L for cutting holes in brick wall built in cement mortar, depth of embedded exceeding half brick and not exceeding one brick and making goof dismantled portion in cement concrete 1:2:4 type B1 for inserting hold fast complete all as specified and as directed by Engineer-in-Charge. |
| 20 | S&F mild steel hold fast, clamps plain angle cleats and similar small articles confirming Fe-400 complete all as specified and as directed by Engineer-in-Charge. |
| 21 | S&F 2nd class hard wood plain, solid, straight chowkat and frames, wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed by Engineer-in-Charge. |
| 22 | S&F aluminum powder coated Z Section openable windows with friction type Hinges 02 Nos on each shutters (top and bottom) with glass panes and stainless steel jalli) including suitable beading channel gasket, rollers Maruthi lock with handles etc complete with following specification:-Window frame outer section H Frame-44.50x34x2mm; center mullion:57x34x25x2mm.Window shutters Z section : 27.75x33.50x1.5mm.Panel :- 5.50mm thick tinted sheet glass of selected quality exc 0.50Sqm each pane fixed to aluminum frame with beadind, rubber gasket. Mosquito proof jali:- Stainless steel jali 0.45mm nominal dia of wire and average width of aperture 1.40mm fixed type with approprriate size powder coated aluminum section on external faces of window.Note: Rate quoted is inclusive of S/F glass pane & stainless steel wire mesh and removing of old wooden windows. |
| 23 | S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with inimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and complete all as specified and as directed by Engineer-in-Charge. |
| 24 | S&F 2nd class hard wood 35mm thick glazed,gauged and skeleton door shutters, open rebated and prepared to receive glass,gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass,gauze,etc, size of members of shutters as specified in SSR Part I, Section 8,ciause 8.24(a). |
| 25 | S&F 40 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engineer-in-Charge. |
| 26 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed by Engineer-in-Charge. |
| 27 | S&F factory made solid PVC moulded door shutter, with wood free EPS 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed by Engineer-in-Charge. |
| 28 | M&L for applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces exceeding 10 cm width or girth including preparation of new surface complete all as specified and as directed by Engineer-in-Charge. |
| 29 | S&F in repair powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap eading, screws etc. complete all as specified and as directed by Engineer-in-Charge. |
| 30 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-Charge. |
| 31 | S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-Charge. |
| 32 | S&F in repair 18/19 mm thick Block boards, grade 2 quality, i n t e r i o r grade, decorative type with decorative face veneer on one face, fixed with screws to timber frame-work Cub board shutter, self etc complete all as specified and as directed by Engineer-in-Charge. |
| 33 | S&F in repair 100mm size hasp and staple, safety type,Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed by Engineer-in-Charge. |
| 34 | S&F in repair Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by Engineer-in-Charge. |
| 35 | S&F in repair door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in repair in floor, 140mm over length of cover plates complete all as specified and as directed by Engineer-in-Charge. |
| 36 | S&F 4.00mm thick frosted glass pin head type and glazing with oil putty / beads in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge. |
| 37 | S&F butt hinges medium weight cold rolled mild steel powder coated with mild steel hinges pin for 100mm size complete all as specified and as directed by Engineer-in-Charge. |
| 38 | S&F stainless steel butt hinges medium weight for 100mm size complete all as specified and as directed by Engineer-in-Charge. |
| 39 | S&F extruded aluminium alloy handles fabricated type anodised 150 mm size complete all as specified and as directed by Engineer-in-Charge. |
| 40 | S&F aluminium anodised barrel tower bolt extruded section of 150 mm long complete all as specified and as directed by Engineer-in-Charge. |
| 41 | S&F aluminium anodised barrel tower bolt extruded section of 200 mm long complete all as specified and as directed by Engineer-in-Charge. |
| 42 | S&F 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed by Engineer-in-Charge. |
| 43 | S&F extruded aluminium alloy handles fabricated type anodised 150 mm size complete all as specified and as directed by Engineer-in-Charge. |
| 44 | S&F extruded aluminium alloy handles fabricated type anodised 100 mm size complete all as specified and as directed by Engineer-in-Charge. |
| 45 | Dismantling of floor hearth or wall tilling tiles including CM bedding (but not backing) and disposing the rubbish off the premises complete all as specified and as directed by Engineer-in-Charge. |
| 46 | M&L for 25mm thick cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in levelling course in floor complete all as specified and as directed by Engineer-in-Charge. |
| 47 | M&L for non skid coloured ceramic tiles 7 to 8 mm thick square/rectangular area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including provision of 15 mm thick screed bed in CM (1:6) complete all as specified and as directed by Engineer-in-Charge. |
| 48 | M&L for glazed ceramic tiles in vertical surfaces 350x250x7 mm /450x350x7mm thick as dado's/skirting including provision of 10 mm thick backing coat in CM (1:3)complete all as specified and as directed by Engineer-in-Charge. |
| 49 | M&L for virified ceramic tiles 8-9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge. |
| 50 | All as per item no. 50 above but as in vertical surface over rendering 10mm thick in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. |
| 51 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and as directed by Engineer-in-Charge. |
| 52 | M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite over 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. |
| 53 | M&L for rounding to edges of stone slabs one edge, of any situations complete all as specified and as directed by Engineer-in-Charge. |
| 54 | Dismantling single layer mangalore pattern or similar tiles in roofing complete all as specified and as directed by Engineer-in-Charge. |
| 55 | Dismantling tile battens of any size including tiling fillets spaced exc 15 cm centre to centre complete all as specified and as directed by Engineer-in-Charge. |
| 56 | Dismantling timber scantlings under 40 Sqcm in section for unframed work in fillets, rails, posts, rafters, purlins etc, in unframed works complete all as specified and as directed by Engineer-in-Charge. |
| 57 | M&L for 2 nd class hard wood plain fillets square or rectangular in section clean sawn secured with nails, sectional area exc 6 sqcm and n exc 13 Sqcm complete all as specified and as directed by Engineer-in-Charge. |
| 58 | All as per item No. 58 here-in-before but for cross sectional area exc 13 Sqcm and n exc 25 Sqcm complete all as specified and as directed by Engineer-in-Charge. |
| 59 | S&F for 2nd class hard wood clean sawn battern for tiles fixed at 30 cm centre to centre, sectional area exc 5 Sqcm and n exc 15 Sqcm complete all as specified and as directed by Engineer-in-Charge. |
| 60 | M&L for roof tiles mangalore pattern interlocking at side joints laid dry complete all as specified and as directed by Engineer-in-Charge. (Note: The sample and pattern of MP tiles shall be approved by GE). |
| 61 | All as per item No. 61 here-in-before but except tiles. |
| 62 | M&L for ridge or hip tiles to suit mangalore pattern of roofing tiles bedded and jointed in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge. |
| 63 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof covering complete all as specified and as directed by Engineer-in-Charge. |
| 64 | S&F 0.71mm thick plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straightflashing(length and girth as fixed) complete all as specified and as directed by Engineer-in-Charge. |
| 65 | S&F 0.63 mm galvanised corrugated mild steel sheeting with two corrugation side lap fixed with L-type ot J-type or cranked hook bolts in roofs and walls, etc with grade of zinc coating 275 complete all as specified and as directed by Engineer-in-Charge. |
| 66 | S&F pre-painted galvalume aluminum zink coating GI based corrugated steel sheet 0.50mm thick, on an colour, having tensil strength of 550 Mpa as in roof fixes with self tapping screws complete all as specified and as directed by Engineer-in-Charge. |
| 67 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover filllets complete all as specified and as directed by Engineer-in-Charge. |
| 68 | M&L for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.4923-1997 grade St.-240 complete all as specified and as directed by Engineer-in-Charge. |
| 69 | M&L for 4 mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium frame work with screws as in ceiling including anodised aluminium snap grid frame work and hangers 6mm dia G.I (upto 1200mm length) adusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40x3mm size 60mm long and expansion hold fasteners 12.5 mm dia 40mm long complete all as specified and as directed by Engineer-in-Charge. |
| 70 | S&F 4mm thick aluminium composite panel of exterior grade with 0.50 mm thick of aluminium layers on both faces, wrapping by routing of joints, wrapping, bending or turning up/mitred angles as per site requirement and fixing with adhesive (Araldite) by popcorn pins and flat pressed the sheets using musking tape till the banding remein solid, complete all as specified and as directed by Engineer-in-Charge. |
| 71 | M&L for preparation of new steel surfaces and applying two coats of anti corrosive paint over a coat of appropriate primer complete all as specified and as directed by Engineer-in-Charge. |
| 72 | Taking down of old wooden kitchen cabinets set including frame complete all as specified and as directed. |
| 73 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed by Engineer-in-Charge. |
| 74 | M&L for18mm thick marine plywood modular kitchen cabinets, inside depth not less than 0.50M , water proof, termite & Borer proof, corrosion free with Decorative laminate 1mm thick both side shutter and auto closer counter sunk hinges, stainless steel handles complete all as directed . ( Note :(i) Only front facing area of cabinet will be measured for payment. (ii) Stainless steel baskets mentioned as supply only under Sl. item No. 76 of this AE shall be fixed under this item as the unit rate quoted against this item is inclusive of this fixing provision) complete all as specified and as directed by Engineer-in-Charge. |
| 75 | Supply only a set of stainless steel baskets with fittings as in modular kitchen cabinet as per following details :- (i) Plate basket 21\\"x19\\"x8\\" - 01 No (ii) Plane basket 21\\"x19\\"x8\\" - 01 No. (iii) Plane basket 17\\"x19\\"x8\\" - 01 No. (iv) Cutlery basket 17\\"x19\\"x4\\" - 01 No. (v) Cup & Saucer basket 17\\"x19\\"x4\\" - 01 No. (vi) Single pull out 8\\" - 01 No. (vii) GT- PT & Drip tray 22\\" - 01 No. (viii) Telescopic channels of appropriate size - 06 Nos. ( Make : First quality of Sleek/ Ebco/ Dolin) complete all as specified and as directed by Engineer-in-Charge. |
| 76 | M&L for 18mm thick marine plywood, water proof, termite & borer proof, corrosion free with decorative laminate 1mm thick both side for cupboard shutter, shelf, drawer, including auto closing hinges complete all as specified and as directed by Engineer-in-Charge. |
| 77 | S&F stainless steel sink with drainage board made out of 1mm thick sheet kitchen or laboratory with plugs, washers including beding lime cement mortar to dwarf wall or including fixing cantilever brackets fixed to wall and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm including waste coupling 40 mm and waste pipe complete all as specified and as directed by Engineer-in-Charge. |
| 78 | Demolition of brickwork or stone/boulder masonry/Pre-cast cement conrete block built in cement mortar including all quoins, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and as directed by Engineer-in-Charge. |
| 79 | M&L for pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:6, Type C1, 1:3:6 (using 20mm graded stone aggregate), complete all as specified and as directed by Engineer-in-Charge. |
| 80 | M&L for rendering 10mm thick on brick or concret wall surfaces with cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 81 | S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls(jointing shall be done with solvent cement) complete all as specified and as directed by Engineer-in-Charge. |
| 82 | S&F PVC (SWR) bends, any radius, 110mm bore all as specified, complete all as specified and as directed by Engineer-in-Charge. |
| 83 | S&F in repair vitreous china wash down water closet single piece (pedestal pattern) snow white (including fixing bolts) including removing old one and connection to drain and flush pipe complete all as specified and as directed by Engineer-in-Charge. Make: Cera Campbell Cat. No.S1013156 or any other eqivalent make as per approved list of manufactures. |
| 84 | S&F in repair plastic water closet seat for single piece closet, snow white , closed pattern with flat bottom, and cover and mild steel chromium plated or alumininsed hinging device complete all as specified and as directed by Engineer-in-Charge. Make : Parryware EWC Seat cover E 8305 Ultra Solid white or any other eqivalent make as per approved list of manufactures. |
| 85 | S&F in repair looking mirror of selected quality glass 4.8mm thick fixed with CP Bracket complete all as specified and directed. Make : Jaquar/Hindware/Parryware |
| 86 | S&F in repair Towel Rack 600mm long with Lower Hangers, Stainless Steel with brackets fixed in repairs 60cm long complete all as specified and as directed by Engineer-in-Charge. Make: Jaquar AKP-35781PFS or any other eqivalent make as per approved list of manufactures. |
| 87 | S&F in repair pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge. Make : Pillar Tap with aerator Parryware Cart Part No.Crust T3102A1 or any other eqivalent make as per approved list of manufactures. |
| 88 | S&F in repair PVC bathroom cabinet (white) of size 420 x 300 x 100mm (approx), with one single shutter and built in mirror in front of shutter complete all as specified and as directed by Engineer-in-Charge. |
| 89 | S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glassshelf 12 cm wide with chromium plated guard and railing size 60cm long (with brass bracket ) complete all as specified and as directed by Engineer-in-Charge. |
| 90 | S&F in repair corner glass shelf of 5mm thick plain sheet glass and with brass, chromium plated bracket complete all as specified and as directed by Engineer-in-Charge. |
| 91 | S&F in repair SS toilet paper holder including fixing screws complete all as specified and as directed by Engineer-in-Charge. Make : Jaquar Cat No.AKP-35751P or any other eqivalent make as per approved list of manufactures. |
| 92 | S&F in repair Towel Ring Round with Round Flange complete all as specified and as directed by Engineer-in-Charge. Make : Jaquar Cart part No. ACN-1121BN or any other eqivalent make as per approved list of manufactures. |
| 93 | S&F in repair SS grating square 125 mm size with centre circular section removal and fixing type complete all as specified and as directed by Engineer-in-Charge. |
| 94 | S&F in repair vitreous China wash hand basin with pedestal of size 580 x 450 mm white, flat back with and including waste fittings brass chromium plated 32 mm with long and fly nut screwed shank excluding taps, waste chain and plug and porcelain stopper but including cast iron brackets complete all as specified and as directed by Engineer-in-Charge. |
| 95 | S&F in repair stainless steel curtain rail bright finished 25 mm dia decorative type complete all as specified and as directed by Engineer-in-Charge. |
| 96 | S&F in repair stainless steel bright finished decorative brackets/finials for curtain rail 25mm dia complete all as specified and as directed by Engineer-in-Charge. |
| 97 | M&L for anti-termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed by Engineer-in-Charge. |
| 98 | M&L for anti-termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed by Engineer-in-Charge. |
| 99 | M&L for anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed by Engineer-in-Charge. |
| 100 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. to match with the existing complete all as specified and as directed by Engineer-in-Charge. |
| 101 | M&L for point wiring for one light/ fan point/exhaust fan point controlled by one 5 Amp switch with 1100 volt grade FRLSH PVC insulated-unsheathed 1.5 Sq mm multi stranded copper conductor cable with continuous earth wire of 1.5 Sq mm multi stranded copper conductor cable PVC insulated-unsheathed, drawn in & including concealed rigid non metallic PVC conduit medium grade with fittings (ISI marked) not less than 20 mm dia fixed concealed on wall/ roof except beam, column and RCC roof including fixing flush metal box not less than 1.6 mm thick sheet for fixing modular switch and socket with modular cover plates and making good to the disturbed surfaces of walls, floors etc complete all as specified and as directed. Note : Proper colour coding to be adopted. |
| 102 | All as per item No. 101 here-in-before but one light point controlled by one, two way switch 5 complete all as specified and as directed. Amps |
| 103 | All as per item No. 101 here-in-before but one bell point controlled by one, bell switch 5 Amps complete all as specified and as directed. |
| 104 | All as per item No. 101 here-in-before but one 5 Amps socket outlet on same board complete all as specified and as directed. |
| 105 | All as per item No. 101 here-in-before but one 5 Amps socket outlet on independent board complete all as specified and as directed. |
| 106 | M&L for point wiring for 15 Amp power point controlled by one 15 Amp switch with 1100 volt grade FRLSH PVC insulated-unsheathed 2.5 Sq mm multi stranded copper conductor cable with continuous earth wire of 2.5 Sq mm multi stranded copper conductor cable PVC insulated-unsheathed, drawn in & including concealed rigid non metallic PVC conduit medium grade with fittings (ISI marked) not less than 25 mm dia & sunken anodized pressed steel sheet boxes made out of not less than 1.6 mm thick sheet, covered with 2.8 mm thick laminated insulated cover sheet for housing/fixing switches etc complete all as specified and directed. Note : Proper colour coding to be adopted. |
| 107 | M&L for power point controlled by one metal clad industrial socket with 1100 volt grade FRLSH PVC insulated-unsheathed 4 Sq mm multi stranded copper conductor cable with continuous earth wire of 4.0 Sq mm multi stranded copper conductor cable PVC insulated-unsheathed, drawn in & including concealed rigid non metallic PVC conduit medium grade with fittings (ISI marked) not less than 20 mm dia & sunken anodized pressed steel sheet boxes made out of not less than 1.6 mm thick sheet, covered with 2.8 mm thick laminated insulated cover sheet for housing/fixing switches etc complete all as specified and directed. Note : Proper colour coding to be adopted. |
| 108 | S&F switch modular single pole one way 6 amp 240 volts,1 Module complete all as specified and as directed. |
| 109 | S&F switch modular single pole two way 6 amp 240 volts,1 Module complete all as specified and as directed. |
| 110 | S&F modular socket 6Amp 2/3 pin combined 2 module complete all as specified and as directed. |
| 111 | S&F switch modular single pole one way 16 amp 240 volts,1 Module complete all as specified and as directed. |
| 112 | S&F modular socket 16Amp 2/3 pin combined 2 module complete all as specified and as directed. |
| 113 | S&F ceiling rose 3 terminals PVC/Polycarbonate, isolated body, ISI marked complete all as specified and directed. |
| 114 | S&F modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and directed. |
| 115 | S&F Bell push modular 6 Amps single module complete all as specified and directed. |
| 116 | S&F Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and directed. |
| 117 | S&F modular type TV Co - axial Socket out let, 1 Module complete all as specified and as directed. Make : Legrand Cat part No. 6730 50 or any other eqivalent make as per approved list of manufactures. |
| 118 | S&F sheet metal enclosure single pole & neutral enclosure with a two pin & earth plug & socket complete with one single pole MCB 20 Amps complete all as specified and directed. |
| 119 | M&L for sub main wiring with two runs of 10 sqmm PVC insulated multi stranded FRLS copper cable drawn through PVC concealed conduit of size not below 25mm size with all fixing accessories along with one run of 10 sqmm copper cable as earth continuity conductor complete including taking down old sub main wiring complete all as specified and as directed. Note :- Two runs of 10 sqmm and one runs of 10 sqmm cable as earth along with PVC conduit will be measured as one length. |
| 120 | S&F BED side lamp the prodect FERMO FOCOUS LED lights fitting 1x 7 W, 220V, with driver, holder and high quality material complete all as specified and as directed. Make : LUKER CAT PART NO-LPS07N BK or any other eqivalent make as per approved list of manufactures. |
| 121 | S&F LED lights fitting 1x 20W, 230V, AC decorative box type with driver holder, 120 lum/watt including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Engineer-in-Charge. |
| 122 | S&F LED light fitting mirror type with high out put diffuser 2 feet 120 lum/watt, 10 watt, 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-Charge. |
| 123 | S&F decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and provosion of LED bulb 10 watts complete all as specified and as directed. Make Havells Cat No LHFOAJE1TN1I060 or any other eqivalent make as per approved list of manufactures. |
| 124 | S&F LED building security light fitting 60 Watt, 230 V, AC outdoor type, 140 lum/watt with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed by Engineer-in-Charge. |
| 125 | Dismantling the ceiling fan from any height for repair/over hauling, painting complete with synthetic enamel paint by spraying including filling cavities with filler, after cleaning all dust etc complete including replacement of shackle/small spares as per site requirement and refixing the same with replacement of unsv 3 core PVC insulated PVC sheated multistranded copper conductor cable of suitable size from ceiling rose to fan terminal complete all as specified and as directed by Engineer-in-Charge. |
| 126 | Dismantling the wall mounted fan from any height for repair/over hauling, painting complete with synthetic enamel paint by spraying including filling cavities with filler, after cleaning all dust etc complete including replacement of small spares as per site requirement and refixing the same at site complete all as specified and as directed by Engineer-in-Charge. |
| 127 | Dismantling the exhaust fan steel body 300mm sweep from any height for repair/over hauling, painting complete with synthetic enamel paint by spraying including filling cavities with filler, after cleaning all dust etc complete including replacement of fan motor of suitable size/small spares as per site requirement and refixing the same with replacement of unsv 3 core PVC insulated PVC sheated multistranded copper conductor cable of suitable size from ceiling rose to fan terminal complete all as specified and as directed by Engineer-in-Charge. |
| 128 | Dismantling the exhaust fan PVC plastic body 250mm sweep from any height for repair/over hauling after cleaning all dust etc complete including replacement of fan motor of suitable size as per site requirement and refixing the same with replacement of unsv 3 core PVC insulated PVC sheated multistranded copper conductor cable of suitable size from ceiling rose to fan terminal complete all as specified and as directed by Engineer-in-Charge. |
| 129 | Disconnecting carefully Electric and water connection from the geyser of any capacity and dismantling for repair by taking out the syphon assembly of thermostat, heating element and cleaning, de-scaling the inner tank by de-scaling chemical compound including soldering, brazing the inner tank if required, re-assembling the geyser after cleaning & servicing including replacement of certain minor parts such as heating element, thermostate, rubber washer of syphon set, flexible 3 core cable of size 2.5 sqmm with copper conductor up to 1.5 mtr long including preparaition of surface of geyser by scrapping and applying one coat of sythetic enamel paint of approved colour over a coat of zinc primer and re-fixing in existing position complete all as specified and as directed by Engineer-in-Charge. |
| 130 | S&F sheet metal enclosures for DBs when MCBs to used single pole & neutral (SPN) double door 240 volts, 8 way with 200 Amp rated bus bar complete all as specified and as directed by Engineer-in-Charge. |
| 131 | S&F sheet metal enclosures for DBs when MCBs to used single pole & neutral (SPN) double door 240 volts, 12 way with 200 Amp rated bus bar complete all as specified and as directed by Engineer-in-Charge. |
| 132 | S&F sheet metal enclosures for DBs when MCBs/MCCBs to be used verticle tripple pole & neutral (VTPN) double door (Optium F1+12), 415 volts, 4 way with IP-42, IK-08 protection incl 200 Amp rated copper bus bar and neutral link (ISI marked) complete all as specified and as directed by Engineer-in-Charge. |
| 133 | S&F 240V, 10KA, 'C' curve miniature circuit breaker (MCB) of single poles and neutral and current carrying capacity 40A to 63 Amp in the MCB DB complete with connection testing and commissioning complete all as specified and as directed by Engineer-in-Charge. |
| 134 | S&F 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed by Engineer-in-Charge. |
| 135 | S&F MCCB 4 Pole, 415 V, adjustable type, 100 Amps with breaking capacity 25 KA duly ISI marked complete all as specified and as directed by Engineer-in-Charge. |
| 136 | Taking down existing single phase/ three phase electronic energy meter of any capacity after disconnecting all necessary electrical connections and refixing the same in the existing position and making good to disturbed surfaces of walls as per existing shape complete all as specified and directed. |
| 137 | S&F rigid non-metallic PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. heavy duty ISI marked of size 20 mm dia for LAN, telephone and TV connections including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and as directed by Engineer-in-Charge. |
| 138 | M&L for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanized iron wire 4mm dia as earth up to 7.5 m distance and connected by means of bolts, nuts, checknuts and washers of galvanised iron or steel all shown in electric plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including provision of necessary excavation and earth work in any type of soil, PCC pit , RCC cover 50 mm thick, reinforced with 8 mm dia TMT bars both ways @ 10 CM c/c, 20 mm bore medium grade watering pipe, water funnel, 25 mm bore GI light grade protection pipe, common salt, charcoal dust, returning, filling in of soil, removal of spoil to a distance not exceeding 50 mtr etc including testing on completion complete all as specified and as directed by Engr-in-Charge. Note :- (i) The unit rate includes for protection pipe and earth lead upto 7.50 Mtr. (ii) Earth lead beyond 7.50 Mtr length shall be measured and paid separately. |
| 139 | S&F in repair wall/concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessary fittings, solvents of size 40 mm dia complete all as specified and as directed by Engineer-in-Charge. |
| 140 | S&F in repair wall/concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessary fittings, solvents of size 25 mm dia complete all as specified and as directed by Engineer-in-Charge. |
| 141 | S&F in repair wall/concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessary fittings, solvents of size 20 mm dia complete all as specified and as directed by Engineer-in-Charge. |
| 142 | S&F bib cock, CP Brass type quarter turn with flange and aerator, fancy type long body with wall flange cast copper alloy with crutch or butterfly handle screwed for GI/CPVC pipe of size 15 mm complete including taking down old tap complete all as specified and as directed by Engineer-in-Charge. |
| 143 | S&F bib cock, CP Brass type quarter turn with flange and aerator, fancy type short body with wall flange cast copper alloy with crutch or butterfly handle screwed for GI/CPVC pipe of size 15 mm complete including taking down old tap complete all as specified and as directed by Engineer-in-Charge. |
| 144 | S&F two way Bib cock, CP Brass type quarter turn with flange and aerator, fancy type with wall flange cast copper alloy with crutch or butterfly handle screwed for GI/CPVC pipe of size 15 mm complete including taking down old tap complete all as specified and as directed by Engineer-in-Charge. |
| 145 | S&F CP Brass type concealed stop cock regular body,Quarter turn with adjustable wall flange chromium plated with CP cup fancy type of size 20mm complete including taking down old tap complete all as specified and as directed by the Engineer-in-Charge. |
| 146 | S&F stop cock, CP Brass type quarter turn with flange and aerator, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete including taking down old tap complete all as specified and as directedby the Engineer-in-charge. |
| 147 | S&F health faucet ABS body with wall hook and 1 metre SS braided rubber hose pipe, including taking out old complete including taking down old tap complete all as specified and as directed by Engineer-in-Charge. |
| 148 | S&F swivel overhead shower (minimum weight 40 grams) of CP Brass type colour with shower arm (minimum weight 40 grams) 15mm size, 195 mm long with bend of 45 degree with flange for fixing with CPVC pipe including taking down old tap complete all as specified and as directed by the Engineer-in-Charge. |
| 149 | S&F in repair chromium plated cast copper alloy Kitchen Sink Cock, quarter turn, wall mounted with swivel spout not less than 150 mm (6\\") and wall flange complete all as specified and as directed. |
| 150 | S&F in repair Wall Mixer (3-in-1) with arrangement of both Telephonic Shower and Over Head Shower, with 210mm long bend pipe, complete all as specified and as directed by the Engineer-in -Charge. |
| 151 | S&F CP brass type Bib cock short body with flange and nozzle for garden/ washing machine of size 15 mm including necessary fixing accessories with GI/ CPVC pipes and taking down old unserviceable tap of any make complete all as specified and as directed by the Engineer-in-Charge. |
| 152 | S&F in repair PVC connections 15mm size with PTMT nuts of length 300mm complete all as specified and as directed by Engineer-in-Charge. |
| 153 | S&F in replacement of Rotational mouldede polyethylene water storage tanks (cylinderical vertical with closed top) hoisted & fixed in position of capacity 2000 liters including inlet, outlet, over flow wash out and Air pipe conncetions complete all specified and directed by Engnieer-in-Charge. Make : Sintex (ISI)or equivalent to any other make in the approved manufactures list. Note : 3 layered structure PVC tank. |
| 154 | S&F in repair, 25 mm dia synthetic (PVC) float valve, high pressure, with polythene ball of size 6\\" dia. and flynut, complete all as specified and as directed by Engineer-in-Charge. |
| 155 | S&F in repair CPVC ball valve of size 25 mm dia suitable for CPVC pipe incl necessary fittings complete all as specified and as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender