Tender For Providing Of Paver Block And Oht Near Bldg No Np-48 At Site P At Af Stn Thane Under Ge Af Thane
Tender Value
4.90 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
7 days left
EMD
9800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thane → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of Paver Block And Oht Near Bldg No Np-48 At Site P At Af Stn Thane Under Ge Af Thane
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in post holes (or similar holes) in hard/dense soil each n exc 0.5n cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, cucomplete all as specified and directed by Engr-in-Charge. |
| 2 | M&L for PCC 1:2:4 type B-2 using nominal size of graded coarse aggregate 20 mm graded coarse aggregate as in foundation of fencing posts complete all as specified and directed by Engr-in-Charge. |
| 3 | S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed by Engr-in-Charge. |
| 4 | M&L MS work flat iron, MS plates as in brackets, cleats, fasteners, wind ties, supports, base for posts etcwith riveted, bolted or welded attachment complete all as specified and directed by Engr-in-Charge. |
| 5 | M&L for Preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge. |
| 6 | S&F for bib taps, cast copper alloy, 15mm dia, fancy type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and as directed by Engr-in-charge |
| 7 | S&F for stop valves, 15mm dia, cast copper alloy with capstan head, chromium plated, screwed down high pressure with crutch or butterfly handle with long shank and cup (concealed type) for iron pipe etc complete all as specified and directed by Engr-in-Charge. |
| 8 | S&F for Gun metal globe or gate valve 15 mm bore with iron wheel head, screwed both ends for iorn pipe and any pipe complete all as specified and directed by Engr-in-Charge. |
| 9 | S&F for Gun metal globe or gate valve 20 mm bore with iron wheel head, screwed both ends for iorn pipe and any pipe complete all as specified and directed by Engr-in-Charge. |
| 10 | Supply and fix GI water tubing of 15mm dia, medium grade conforming to IS 1239 (Part-1) including all fitings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc and fixed to walls, celling or laid on floors including testing complete all as specified and directed by Engr-in-Charge. |
| 11 | Supply and fix GI water tubing of 20mm dia, medium grade conforming to IS 1239 (Part-1) including all fitings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc and fixed to walls, celling or laid on floors including testing complete all as specified and directed by Engr-in-Charge. |
| 12 | S&F ball brass valves, 20mm, high pressure, with polyethylene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Engr-in-Charge. |
| 13 | S&F for PVC rotational moulded polyethylene water storage tanks of cap 1000 ltrs (cylinderical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engr-in-Charge. |
| 14 | S & F for Wash basin viterious china (flat back or angle back type of size 630mm x 450mm) including cutting for and pinning in ends of brackets or errecting stand including waste fittings, waste pipes complete all as fix in repairs complete all as specified and directed by Engr-in-Charge. |
| 15 | S&F for pillar taps, cast copper alloy, 15mm dia , with capstan head, chromium plated screwed down high pressure with or with out lettered \\"HOT\\" or \\"Cold\\" with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge. |
| 16 | S&F for PVC connection of 15mm bore and 450mm long with brass check nut and union etc , complete all as specified and directed by Engr-in-Charge. |
| 17 | M&L PVC(SWR) floor trap,plain with gratings incl jointing with solvent cement 75mm dia outlet complete all as specified and directed by Engr-in-Charge. |
| 18 | S&F PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engr-in-Charge. |
| 19 | Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense complete all as specified and directed by Engr-in-Charge. |
| 20 | M&L for hardcore broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed by Engr -in-Charge. |
| 21 | M&L 100mm thick cement concrete type D2 1:4:8 (40mm graded aggregate) in sub base complete all as specified and directed by Engr -in-Charge. |
| 22 | M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr -in-Charge. |
| 23 | M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed by Engr -in-Charge. |
| 24 | Removing excavated soil n.exc 50mtr and depositing where complete all as specified and directed by Engr -in-Charge. |
| 25 | M&L for type B1 1:2:4 (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs stone, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed by Engr-in-Charge. |
| 26 | Point wiring with 1.5 sqmm copper conductor single core core , cable (multistrand) PVC insulated FRLS (unsheathed) concealed drawing in and including PVC conduit 25 mm dia, having wall thickness not less than 2 mm for one light poInt, controlled by one , one way switch , including 1.5 sqmm PVC insulated FRLS (unsheathed ) copper conductor continuous earth wire complete all as specified and directed by Engr-in-Charge. |
| 27 | All as per item No 26 above, but for One fan point controlled by one switch complete all as specified and directed by Engr-in-Charge. |
| 28 | All as per item No.26 above, but with 2.5 sqmm for One 3 pin 16 amps socket outlet point controlled by one 16 amps switch on on Ind board complete all as specified and directed by Engr-in-Charge. |
| 29 | Supply & fix switch piano flush type single pole one way, 16 Amps complete all as specified and directed by Engr-in-Charge. |
| 30 | Supply & fix socket outlet 3 pin 16 Amps, flush type complete all as specified and directed by Engr-in-Charge. |
| 31 | S&F Switch Piano 6 Amp, Flush type, Single Pole, 1-way, complete all as specified and directed by Engr-in-Charge. |
| 32 | Supply & fix ceiling rose, 3 terminal, PVC/polycarbonate body complete all as specified and directed by Engr-in-Charge. |
| 33 | Supply & fix in repair LED lights 1x20 watt ,220 V, AC decorative box type with driver , holder including LED tube light connecteing up with three core flexible copper conductor cable of suitable size from ceiling rose including connector block etc.and necessary fixing arrangement at any height and removing old unserviceable item complete all as specified and directed by Engr-in-Charge. |
| 34 | Material and labour for sub main wiring complete with 2 run of 6 sqmm, single core, copper conductor cable 1100 volts grade ,FRLS type, PVC insulated,unsheathed,flexible,multi stranded duly colour coded cable drawn through and including PVC casing and caping of size 25mm width or above as required at site and accessories such as tee, corners, overlapping connector etc of suitable size fixed on surface of walls/roofs/ceiling and including 01 run of 6 sqmm single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded of green colour as earth continuity conductor connected to common earth dolly including removing old unserviceable item complete and making good the disturbed surfaces to match with existing all as specified and directed. Note : - 02 run of 6 sqmm single core copper conductor cable and one run of 6 sqmm single core copper conductor cable and 01 run of PVC casing and capping shall be measured as one unit complete all as specified and directed by Engr-in-Charge. |
| 35 | Supply,fixing MCB distribution board double Door of sheet metal Single pole and neutral 8 way with 200 amps rated bus bar 240 volts complete all as specified and directed by Engr-in-Charge. |
| 36 | Supply & fixing MCB SPN 32 Amps 10 KA, \\"C\\" series, 240 volts complete all as specified and directed by Engr-in-Charge. |
| 37 | Supply & fixing MCB SP 6 to 32 Amps 10 KA, \\"C\\" series, 240 volts complete all as specified and directed by Engr-in-Charge. |
| 38 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed by Engr-in-Charge. |
| 39 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed by Engr-in-Charge. |
| 40 | M&L for Galvanised steel water tubing ISI Marked medium grade with complete all fittings such as elbow, unions, nipples, tees, bends, short pieces, connectors, back-nuts, caps, plugs, diminishing pieces and sockets etc as per site requirement of 25mm dia GI pipe line complete all as specified and directed by Engr-in-Charge. |
| 41 | Supply, installing and testing Gun metal glove or gate valve, with iron wheel head, complete with suitable for 25mm bore pipe, screwed both side ends for GI pipe or unions and fixed in size 25mm dia complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender