Tender For Special Repair To Np 40 And Certain Sanctioned Works At Af Stn Thane Under Ge Af Thane
Tender Value
41 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
4 days left
EMD
82000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thane → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Np 40 And Certain Sanctioned Works At Af Stn Thane Under Ge Af Thane
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of un-reinforced cement concrete in any position complete all as specified and directed by Engr-in-Charge. |
| 2 | M & L for Cement concrete with type D2 1:4:8 (40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed by Engr-in-Charge. |
| 3 | M&L for Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in floor, 100mm thick, surfaces finished even and fair without using extra cement as in floor including provision of construction joints complete all as specified and directed by Engr-in-Charge. |
| 4 | M&L for Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ complete all as specified and directed by Engr-in-Charge. |
| 5 | M&L for Forming Construction joint 30mm deep x 10mm wide filled with grade 'A' sealing compound complete all as specified and directed by Engr-in-Charge. |
| 6 | M&L for Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints complete all as specified and as directed by Engr-in-charge |
| 7 | Excavating in post holes (or similar holes) in hard/dense soil each n exc 0.5n cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed by Engr-in-Charge. |
| 8 | Dismantling wrought iron or mild steel work of any description not otherwise provided for MS railling work complete all as specified and directed by Engr-in-Charge. |
| 9 | S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed by Engr-in-Charge. |
| 10 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed by Engr-in-Charge. |
| 11 | S&F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge. |
| 12 | S&F pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge. |
| 13 | S&F mild steel screw bolts of 11 to 18 diameter of neck in mm (machine made) with hexagonal or square heads at one end and screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut nexc 5 cm long complete all as specified and directed by Engr-in-Charge. |
| 14 | M&L MS work flat iron, MS plates as in brackets, cleats, fasteners, wind ties, supports, base for posts etcwith riveted, bolted or welded attachment complete all as specified and directed by Engr-in-Charge. |
| 15 | Material and labour for providing & fixing false ceiling at all heights with GRG (Glass fiber reinforced gypsum) false ceiling tiles of size 595x 595 mm of approved texture, design and patterns having moisture content less then 2%, humidity resistence of 99%, NRCO 0.50 to 0.75 as per IS 8225:1987, noncumbustible as per BS 476 (Part 4) 1970 and light reflectance of 85% (minium) to be laid in true horizontal level suspended on interlocking metal T-grid of hot dipped galvanised iron section of 0.33 mm thick (galvanised @ 120 grams per Sqm including both side)comprising of main T runners of size 15 x32 mm oflength 3000mm, cross-T of size 15 x 32 mm of length 1200 mm and secondary intermediate cross-T of size 15 x 32 mm of length 600 mm to form grid module of size 600 x600mm, suspended from ceiling using galvanised mild steel items (galvanised @ 80 grams per Sqm) i.e. 50mm long, 8mm outer diameter, M-6 fastener , 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2 mm, glavanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wooden screws. The work shall be carried out as per specification, drawing and as per direction of Engineer-in-charge. |
| 16 | Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Square metre each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified and directed by Engr-in-Charge. |
| 17 | All as per item above herein before but size exceeding 1.5 Square metre and not exceeding 4 Square metre each complete all as specified and directed by Engr-in-Charge. |
| 18 | S&F Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc completed all as specified and directed by Engr-in-Charge. |
| 19 | M&L for cement concrete (1:2:4) type B-I using 20mm graded stone agg as in hold fast, coping incl. necessary form work complete all as specified and directed by Engr-in-Charge. |
| 20 | Taking down shutter of any description of exceeding 1 sqm but not exc 2 Sqm complete all as specified and directed by Engr-in-Charge. |
| 21 | S&F 35mm thick IInd class HW rail and style plain framed panelled factory made shutter (Two panel) with lock rail and panel of 9mm BWP,commercial ply or 12mm veneered particle beard with commercial veneering on both faces. The size of rail and stile as per IS :1003 (Part-I) kiln and chemically pressure treated complete all as specified and directed by Engr-in-Charge. |
| 22 | S&F Mild steel butt hinge, 100 mm long, medium weight, cold rolled fixed with steel screws or welded to steel frame where required complete all as specified and directed by Engr-in-Charge. |
| 23 | S&F for 150 mm Aluminium anodised, barrel tower bolts of ex truded section and fixed complete all as specified and directed by Engr-in-Charge. |
| 24 | S&F for 150 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engr-in-Charge. |
| 25 | S&F Aluminium alloy, anodised, 300mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge. |
| 26 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed by Engr-in-Charge. |
| 27 | S&F in repair 4mm thick Sheet glass, ordinary quality and glazing with glazing clip and powder coated aluminium beading in square n exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-Charge. |
| 28 | M&L for Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge. |
| 29 | Taking down cement plaster or terrazzo from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge. |
| 30 | M&L for Rendering/plastering, 15 mm thick in cement mortar (1:4) on brick or concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 31 | M&L for 15mm thick rendering in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 32 | M&L for Preparation of newly plastered surfaces of Wall & applying two coats coats of white wash complete all as specified and directed by Engr-in-Charge. |
| 33 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engr-in-Charge. |
| 34 | M&L complete removal of existing treatment on surface of wall etc in any position washing down with water and clearing the surface from all loose dirt, chalk, grease, fungi,algal, flakes etc, and applying two coats of weather proof acrylic paint over a coat of weather proof primer with camoulfage pattern complete all as specified and directed by Engr-in-Charge. |
| 35 | Preparation of old decorated surfaces of wall and applying one coat of white lime wash (white washing) on walls including corneces, pillars complete all as specified and directed by Engr-in-Charge. |
| 36 | M&L for Preparation of old decorated surface of steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge. |
| 37 | M&L for Preparation of old painted wood or wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all connnected accessories all as specified and directed by Engr-in-Charge. |
| 38 | Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust and received to kota stone etc complete all connnected accessories all as specified and directed by Engr-in-Charge. |
| 39 | M&L Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engr-in-Charge. |
| 40 | All as per Item No-39 hereinbefore but as on vertical surfaces such as skirting/dado over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed by Engr-in-Charge. |
| 41 | M&L for Kota stone slabs in flooring, 20-25mm thick, machine cut as in flooring of size not less than 0.25 Square metre each, set and jointed in cement slurry over & including screed bed of 20 mm thick in cement mortar (1:6) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and polishing (mirror type) complete all as specified and directed by Engr-in-Charge. |
| 42 | M&L for Glazed ceramic coloured (colour & shade as approved) tiles non skid of size 400x400x7mm thick as in floor set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed by Engr-in-Charge. |
| 43 | Material & labour for Glazed ceramic coloured tiles in vertical surfaces 350x250X7/ 350x450x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over including 10 mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces complete all as specified and directed complete all as specified and directed by Engr-in-Charge. |
| 44 | M&L for Preparation of newly plastered surfaces of walls & applying two coats of OBD on chalk whiting on plastered surfases complete all as specified and directed by Engr-in-Charge. |
| 45 | M&L for Preparation of old decorated surface of wall and applying one coat of oil emulsion distemper complete all as specified and directed by Engr-in-Charge. |
| 46 | S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including distance pieces and stack clamps as in rain water pipes as in repair complete all as specified and directed by Engr-in-Charge. |
| 47 | S&F 110 mm bore PVC (SWR) bends/shoe any radius fixed to walls including distance pieces and stack clamps complete all as specified and directed by Engr-in-Charge. |
| 48 | S&F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified. (fitting measured separately) complete all as specified and directed by Engr-in-Charge. |
| 49 | S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent including jointing to waste pipe in run lead as in repairs complete all as specified and directed by Engr-in-Charge. |
| 50 | S&F Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed by Engr-in-Charge. |
| 51 | S&F Bib taps CP 15MM, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-Charge. |
| 52 | M & L point wiring with 1.5 Sqmm (nominal area) 1100 volt PVC insulated unsheathed FRLS multi - standed single core copper conductor cable with 1.5 sqmm (nominal area) 1100 volt PVC insulated unsheathed FRLS multi stranded single core copper conductor cable (Green colour) as Earth Cotinuity conductor drawn through CASING CAPING of suitable size medium grade ISI marked including necessay Accessories, surface as ordered, mounted on 1.6 mm thick sunk mild steel pressed Terminal Box of suitable size duly painted with Rd Oxide metal primer with 3.0mm thick plastic laminated sheet top cover for mounting switches, sockets Fan Regulators, etc. and Earth continuity connected to common Earth dolly for ONE LIGHT / FAN POINT/ Bell Point CONTROLLED BY ONE 1-WAY SWITCH 6 AMP including groting conduit on Brick Walls, etc. and making Good disturbed surfaces of Brick Walls, Ceillings, Floors etc. in Cement Mortar 1:3 and necessary Surface Treamtents so as to match with the Existing Finishes, complete all as specified and as directed by Engr-in-Charge. |
| 53 | All as per item No 52 here in before but for ONE 3 PIN SOCKET OUTLET 6 AMP ON THE INDEPENDENT BOARD complete all as specified and directed by Engr -in-Charge. |
| 54 | All as per item No 52 here in before but for ONE 3 PIN SOCKET OUTLET 15 AMP ON THE INDEPENDENT BOARD complete all as specified and directed by Engr -in-Charge. |
| 55 | Supply and Fix switch socket combination 2 in 1,5 pin, 5 Amps flush type 220V complete all as specified and directed by Engr -in-Charge. |
| 56 | Supply and Fix switch socket combination 2 in 1,5 pin, 5 Amps flush type 220V complete all as specified and directed by Engr -in-Charge. |
| 57 | Taking down of old copper strip any size including insulators and supply and fixing of new copper strip with insulators of sizes 32 x 6mm complete all as specified and directed by Engr -in-Charge. |
| 58 | Supply and lay of steel plates of 10mm thick (plain or chequred ) channels, square cut or notched (ordinary and counter sunk) forming holes with ut any attachment complete all as specified and directed by Engr-in-Charge. |
| 59 | M&L for Cement concrete in posts / columns to support Steel structure with Type B-1, 1:2:4 (20 mm graded aggregate) complete all as specified and directed by Engr-in-Charge. |
| 60 | Preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge. |
| 61 | S&F 3mm thick Aluminium Composite Panel as in wall cladding in any shape / design including aluminium anodised frame work for fixing of panels joints filled with silicon or relevant material complete finishes all as per manufacturer instructions ans standard design practice complete all as specified and directed by Engr-in-Charge. |
| 62 | Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft and loose soil complete all as specified and directed by Engr-in-Charge. |
| 63 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft and loose soil complete all as specified and directed by Engr-in-Charge. |
| 64 | Returning, filling in, including spreading, levelling watering and well ramming in layers n.exc 25cm complete all as specified and directed by Engr-in-Charge. |
| 65 | Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge. |
| 66 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat rough fnished complete all as specified and directed by Engr-in-Charge. |
| 67 | Use and Waste of Formwork for cast in situ slabs for fair and finish surfaces etc complete all as specified and directed by Engr-in-Charge. |
| 68 | M & L for RCC type B1 (1:2:4) (20mm graded aggregate) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed by Engr-in-Charge. |
| 69 | M&L for RCC type B1 (1:2:4) (20mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and directed by Engr-in-Charge. |
| 70 | M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, TMT bars,etc complete all as specified and directed by Engr-in-Charge. |
| 71 | ------Ditto-------- as per ser number 68 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed by Engr-in-Charge. |
| 72 | M&L for 10mm thick rendering in cement mortar (1:3) on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified and directed by Engr-in-Charge. |
| 73 | S&F Framed mild steel work of grade E-165 (Fe-290) as in framed work such as doors, gates or frame for cooler stand with gusset plates, rails, braces etc, drilled for fixing of sheeting or other covering of door etc, to be prepared for hanging or sliding etc including either hooks and hinges or steel hanging door fittings and hanging and fixing complete all as specified and directed by Engr-in-Charge. |
| 74 | S&F of MS posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by Engr-In-Charge. |
| 75 | Supply only GI wire chain link fencing ( exceeding wt 4kg/sqm) minimum 2.5mm thick (Overall thichness of 75X75mm mesh size, complete all as specified and directed by Engr-In-Charge. |
| 76 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire complete all as specified complete all as specified and directed by Engr-In-Charge. |
| 77 | S & F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed by Engr-In-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender