Tender For special Repair To Building No. P-156 (Or Living Accn) At Def & Emp Coy, Hq 21 Corps Under Ge Dronachal
Tender Value
69.90 Lakhs
Estimated cost
Bid Submission
11 Nov 2026
24 days left
EMD
1.29 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhopal → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Building No. P-156 (Or Living Accn) At Def & Emp Coy, Hq 21 Corps Under Ge Dronachal
BOQ
| Sl. No. | Item Description |
| 1 | Taking down existing water proofing treatment of any description incl PCC padding, cement plaster any thickness from roof surfaces, cleaning of roof and prepairing it for further treatment incl make good necessary dubbing out wherever required and removing rubbish from site complete all as specified and directed. |
| 2 | M & L for preparing RCC roof surfaces with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particle and applying APP modified bituminous water proofing membrane with polyester reinforcement and plain finish of 3 mm thick (total weight of the finished membrane not less than 3.8 kg/ sqm ± 5 % per sqm) confirming to IS 16532: 2017 over a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25⁰C, 0.87-0.89 kg/ litre and viscosity 70-160 cps, laying over the primer coat using Butane Torch and sealing all joints, overlapping etc. as per Annex D of IS 16532: 2017 complete all as specified and as directed. (Rates Also Include the Ponding Test for the Waterproofing Treatment.) |
| 3 | M & L for cement concrete type B0 1:2:4 (12.5mm graded aggregate ) benching/ angle filleting at the junction of parapet and RCC roof complete all as specified and as directed. |
| 4 | M & L for cutting grooves or chase in brick wall, 75 mm wide and 65 mm deep and including filling with cement mortar 1:4 mixed with water proofing as mentioned in Annex D of IS 16532: 2017, IS 16540: 2017 compound complete all as specified and as directed. |
| 5 | Material & labour for rendering 10 mm thick in cement mortar 1:4 over RCC slab mixed with water proofing compound @ 3% by weight of cement or manufacturer instruction complete all as specified and directed. (Note;- water proofing compound shall be measured and paid separately as supply only) |
| 6 | M & L for cement concrete M15 (Nominal Mix) using 12.5 mm nominal size graded crushed stone aggregate mixed with water proofing compound as levelling course of roof padding finished even and fair complete all as specified and as directed. Note:- Water proofing compound shall be measured and paid for separately. |
| 7 | M&L for grout of permanent bonding of strutural damage/crack, porosity of concrete to attend leakage/seepage with pressure grouting with 15mm bore GI Pipe Nozzle under the pressure of 5 kg/sqcm using cement based grout, treatment to be made as per instruction complete all as specified and directed. |
| 8 | M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and diretced |
| 9 | Supply only Integral waterproofing compound complete all as specified and directed. |
| 10 | Dismantling floor, hearth or wall tiling including cement motar bedding (but not backing), removing serviceable tiles to stores and rubbish of the premisses complete all as specified and directed. |
| 11 | M & L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles over and incliding screed bed 15cm in CM (1:6) complete all as specified and directed. |
| 12 | M & L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.18sqm but not exceeding 0.38 sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles over and incliding 10mm thick CM (1:4) as in backing coat complete all as specified and directed. |
| 13 | M & L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles over and incliding screed bed 15cm in CM (1:6) complete all as specified and directed. |
| 14 | M&L Glazed ceramic tiles in vertical surface 450X 350X 7 mm thick set and jointed in neat cement slurry and pointed in white or colou cement to match fixed over 10mm thick CM (1:4) as in backing coat complete all as specified and directed. |
| 15 | Demolition of Brickwork or Stone Boulder Masonary, Bulit in Cement Mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 16 | M & L for brickwork with Fly ash Bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed. |
| 17 | M & L for brickwork with sub-class `B` bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed. |
| 18 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons or Platforms laid bedded in any type of mortar complete all as specified and as directed. |
| 19 | M&L Granite of 20 mm thick (of any type and colour) work (table rubbed/grinding/ moulding and polished) in steps, jambs, pillars, window cills, cooking platforms, wash basin counter and like over and including 20 mm screed bed in CM 1:3 complete all as specified and directed. |
| 20 | Providing edge moulding to 18-20mm thick Granite Stone of any Type stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed. |
| 21 | S & F in Repair, Table top Ceramic Wash Basin Wash Basin of size 600 x 400 x 160 mm or equivalent including Supply and Fix in Repair Bottle Trap of PTMT bottle traps of Dia 32 mm, for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed, Including PVC connections 15 mm size with PTMT nuts of length 600 mm, including waste pipe complete all as specified and as directed. |
| 22 | S & F in Repair, Waste coupling of PTMT (half or full threaded) (Minimum weight 32 mm 45 gms/40 mm-60 gms), Bore dia of only fixed in discharge pipe (mm) complete all as specified and directed. |
| 23 | S&F inrepair 15 mm wash basin mixture, centre hole, mixing hot & cold water, fancy type, cast copper alloy, chromimum plated with capstan head, chromium plated, screwed down high pressure, screwed for iron pipe etc and fixed in repairs complete all as specfied and directed. |
| 24 | S & F in Repair ISI marked 15mm bore stop valves/angle valve cast copper alloy fancy typechromium plated , screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 25 | S&F in repairs Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc all including complete Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect as specified and directed. |
| 26 | S & F in repairs Vitreous China squatting pan, `Orissa` pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with PVC SWR P or S trap complete all as specified and as directed. |
| 27 | Supply and Fixing in repairs for 10 ltrs capacity PVC Valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets flushing cistern, PVC flushing pipe of suitable length and PVC connection 450mm long. complete all as specified and as directed. |
| 28 | Supply only Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed. |
| 29 | Supply and fixing for ISI marked 15mm bore, fancy type bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 30 | S&F in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement of outer outlet dia of 75 mm, complete all as specified and as directed. |
| 31 | S&F in repir Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified including Health faucet fixing in pipe etc. complete all as specified and as directed. |
| 32 | S&F in repair of Toilet paper holder chromium plated recessed type fixing complete all as specified and directed. |
| 33 | S & F in repairs Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) with Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms including fixing to steel pipe or union complete all as specified and as directed. |
| 34 | Supply and Fix Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and as directed. |
| 35 | S & F Aluminium Anodised Tubular towel rail, 20 mm dia, D type, 60cm long between flanges complete all as specified and as directed. |
| 36 | S & F in repairs Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe), complete all as specified and directed. |
| 37 | Supply and Fix in repair Push tap, suitable for urinals, any colour high pressure of PTMT screwed for iron pipe and fixed, (Minimum weight 15mm-47gms/ 20mm- 75gms) 15 mm bore dia of pipe complete all as specified and directed. |
| 38 | Supply and Fix in Repairs, Waste coupling of PTMT suitable for urinals and 32 mm bore dia of discharge pipes (half or full threaded) . (Minimum weight 32mm 45gms/40mm-60 gms) complete all as specified and directed. |
| 39 | Supply and Fix in Repair, Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimum weight 60gms) complete all as specified and directed. |
| 40 | Supply and Fix in Repair Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) complete all as specified and as directed. |
| 41 | Supply & fixing in repair PVC (SWR) pipes single socketed in any length with rubber rings joints laid in fixed to walls or in Trenches including clamps complete all as specified and directed of the following bore of pipe:- |
| 42 | (a) 110mm |
| 43 | (b) 75mm |
| 44 | Supply & fixing PVC (SWR) junction single (single `T') equal or unequal with accessable door inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and as directed of the following bore:- |
| 45 | 110mm |
| 46 | Supply & fixing PVC (SWR) PVC (SWR) vent cowl inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and as directed for the following bore:- |
| 47 | 110mm |
| 48 | Supply & fixing of 75 mm dia PVC (SWR) double (double Y) equal or unequal with accessable door inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and as directed. |
| 49 | Supply & fixing in repair PVC (SWR) pipe bend with accessable door inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and as directed for the following bore:- |
| 50 | 110mm |
| 51 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and as directed. |
| 52 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) but not exc 4 sq. m each complete all as specified and as directed. |
| 53 | Taking down shutters of any description area of each exc 1 sqm but n.exc 2 sqm complete all as specified and directed. |
| 54 | Taking down and refixing shutters of any description exc 1 sqm but n.exc 2 sqm complete all as specified and directed. |
| 55 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 56 | Ditto as above but of Frame size 65x 125 mm |
| 57 | Ditto as above but of Frame size 45x 85 mm |
| 58 | S & F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type on both sides flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture complete all as specified and directed. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutters. |
| 59 | S & F 30 mm Thick Factory made Single Extruded WPC (Wood Polymer Composite) Solid Decorative Type on Both Sides Glazed and Skeleton Shutters open rebated and prepared to receive Glass Gauge etc with cut and mitread beads for securing Glass Etc comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately). WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutters. |
| 60 | S & F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type on single sides flush door shutter suitable for Kitchen/Cupboard of size 24 mm thick, On Shelves and on Shutters, All including Decorative type Fixtures and suitable Type Hinges, Locking Arrangement separte on each portion, comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture complete all as specified and directed. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on one faces of shutters. |
| 61 | S & F, even in repair, stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 62 | S&F for 150 mm aluminium handles, cast type, anodised complete all as specified and directed. |
| 63 | S&F for ISI Marked 150mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and directed. |
| 64 | S&F 300mm long aluminium allooy anodised sliding door bolts with hasp and staple (bolt type) & fixing clip of sheet cast or extruded section & fixing bolt & sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 65 | S&F for 100mm Mild steel butt hinge complete all as specified and directed. |
| 66 | S&F new single action spring hinge, 125mm size, mild steel with steel wire spring, stove enameled black fixed to angle iron door frame by welding complete all as specified and directed. |
| 67 | M&LGreen Marble 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade over and including 20mm screed bed in CM 1:3 complete all as specified and directed. |
| 68 | Providing and fixing factory made uPVC white colour Sliding window Three track (Area may exceed 2.00 Sqm) made of extruded profiles with wall thickness of 2.3mm (+ 0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) |
| 69 | Providing and fixing factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T pofile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.)(A) Area not exceeding 1.00 sqm each |
| 70 | Material and Labour for Supply and Fix Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction. |
| 71 | S&F Sheet glass 4 mm thick n exc 0.5 sqmin each pane fixed in aluminium/wooden/Upvc Frames or Steel frame using oil putty or rubber or any other means as per manufacturere instruction complete all as specified and directed. |
| 72 | S&F Sheet glass 4 mm thick exc 0.5 sqm in each pane fixed in aluminium/wooden frame using oil putty complete all as specified and directed. |
| 73 | S&F 4.0 mm thick figured glass, pin headed type and glazed oil putty in square not 0.50 sqm in each pane complete all as specified and directed. |
| 74 | M & L for preparation of old painted wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying Two coat of synthetic enamel paint complete all as specified & directed. |
| 75 | M & L for preparation of old painted steel surfaces of any description, not otherwise described over 10 cm width or girth and applying Two coat of synthetic enamel paint complete all as specified & directed. |
| 76 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 77 | Supplying and laying of CPVC tubing of Dia 15 mm or equivalent medium weight incl fittings on walls / ceilings or Laying in floors complete all as specified and directed. |
| 78 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 79 | Supplying and laying of CPVC tubing Dia 20 mm or equivalent medium weight incl fittings on walls / ceilings or Laying in floors complete all as specified and directed. |
| 80 | S&F 20mm bore gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed. |
| 81 | Taking down cement plaster of any description incl Tezzao finish as in dado/ skirting of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 82 | M&L for 10 mm thick rendering in CM 1:6 on fair face of brick/ concrete surfaces finished fair and even without using extra cement complete all as specified and directed. |
| 83 | M&L 15 mm (5mm in CM 1:4 with WPC +10mm in CM 1:6 ) thick in two layers rendering in cm 1:4 on fair aces of bricks walls surface finished even and smooth without using extra cement including water proofing compound complete all as specified and directed. (water proofing compound measured and paid seperately) |
| 84 | M&L 10 mm thick rendering in CM 1:3 in ceiling on fair faces of brick/concrete surfaces finished even and smooth w/o using extra cement complete all as specified and directed. |
| 85 | M&L complete removal of old decorated surface of wall and applying two coat of oil emulsion distemper white/coloured over and including one coat of white cement based putty (where it is required) complete all as specified and directed. |
| 86 | M&L for prepration of old ceiling surfaces, applying two coat of white wash on ceiling all as specified complete all as specified and directed. |
| 87 | M & L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of white cement based putty of 1 mm thick , on plastered surfaces, preparatory to distempering complete all as specified and directed. |
| 88 | M & L for preparation of new plastered or unplastered surfaces as in ceilings and applying 3 coats of white wash complete all as specified and directed. |
| 89 | M & L Preparation of new plastered surface wall and applying two coat of Exterior weather proof water base emulsion paint over a coat of white cement based putty complete all as specified and directed. |
| 90 | M & L Preparation of old plastered surface wall and Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 91 | Demolition of lime concrete of any description and in any position complete all as specified and directed. |
| 92 | Roughnening Surfaces of old Concrete floor by Picking, sweeping, cleaningand washing down with water to remove dust etc. complete all as specified and directed. |
| 93 | Brushing Neat Cement Slurry with 3.0 Kg Per Sqm complete all as specified and directed. |
| 94 | M&L 10 mm thick rendering in CM 1:4 in sunken Portion on fair faces of brick/concrete surfaces finished even and smooth w/o using extra cement using Water Proofing Compund @ 3 % weight of cement complete all as specified and directed. |
| 95 | M & L PCC (1:2:4) type B-0, 50 mm thick (Avg Thickness) using 12.5 mm graded stone aggregate using WPC @ 3 % by weight of cement (WPC will be measured separately) complete all as specified and directed. |
| 96 | M & L PCC (1:2:4) type B-0, using 12.5 mm graded stone aggregate using WPC @ 3 % by weight of cement as in coving (WPC will be measured separately) complete all as specified and directed. |
| 97 | M&L for Cement concrete (1:5:10) in foundations, filling of sunken and mass-concrete etc including complete all as specified and directed |
| 98 | Applying only a coat of Bituminuous Primer @ 200 ml per sqm on concrete surfaces complete all as specified and directed. |
| 99 | Supply only Bitumen primer for use in waterproofing and damp-proofing treatments complete all as specified and as directed |
| 100 | Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces in sunken portion, complete all as specified and as directed |
| 101 | Supply and Fix 32 mm GI Pipe medium Grade as in spout n.exc. 1.00 RM Each (in short Length) complete all as specified and directed. |
| 102 | M&L 40 mm thick rendering in CM 1:4 in sunken portion above PCC on fair faces of brick/concrete surfaces finished even and smooth w/o using extra cement using Water Proofing Compund @ 3 % by weight of cement |
| 103 | Supply and fix bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers of suitable size fixed near Washbasin Area complete all as specified and as directed. |
| 104 | M & L PCC (1:3:6) type C-1 using 20mm graded stone aggregate 75mm thick as in plinth protection finished fair even laid in bays n.exc 2m in length and joints filled with bitumen mastic 1:3 complete all as specified and directed |
| 105 | Disconnecting existing tanks of capacity upto 1000 Ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position, Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. complete all as specified and directed. |
| 106 | Dismantling water tanks and removing to store and Supply and Fix Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) of capacity 750 Ltr, hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 107 | Taking down carefully copper/aluminium point wiring from wooden battan/ conduits or from the wall by chasing/cutting (light, fan, socket or power) completely including (fittings such as switches, ceiling roses, pendants, regulator, sockets etc) and making good disturbed surfaces of walls, floor etc complete all as specified and directed. |
| 108 | Taking down old DBs including existing MCCBs and connected items of any make and type from the site and making good surface complete all as specified and directed. |
| 109 | Taking down old submain wiring of any size and make from the site and making good surface complete all as specified and directed. |
| 110 | Taking down old unsv light fitting,Security light ,bulb of any size and make from the site and making good surface complete all as specified and directed. |
| 111 | M&L for point wiring with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing concealed in wall & including rigid PVC conduit FRLS, medium grade ,ISI marked ,terminal box of 1.6 mm thick and its also including various sizes of module plates in gray colour also including porvision of earth wire PVC insulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly complete all as specified and directed. |
| 112 | One light/Ceiling fan/Exhaust fan point controlled by one switch. |
| 113 | One light point controlled by two way switch |
| 114 | One 3 pin socket outlet on same board. |
| 115 | One 5 pin socket outlet 5 hole 5 Amp independent including PVC unsheathed copper conductor 1.5 Sqmm cable as earth wire connected to common earth and to earth dolly complete all as specified and directed. (socket & switches to be measured and paid separately.) |
| 116 | -ditto- as above item No 106.03 but copper conductor 2.5 sqmm for 15 amp socket outlet complete all as specified and directed. |
| 117 | M&L for One power point with insulated stranded copper conductor cable 4 Sqmm single core and PVC insulated FRLS 1100 Volts unsheathed copper conductor 4 Sqmm stranded conductor as earth wire connected to dolly complete all as specified and directed. |
| 118 | S & F in replacement of modular switch single pole one way 6 Amps, 1 module ISI marked complete all as specified and directed. |
| 119 | S & F in replacement of modular socket single pole one way 6 Amp-2/3 pin, 2 module ISI marked complete all as specified and directed. |
| 120 | S & F in replacement of modular switch single pole one way 16 Amps, 1 module ISI marked complete all as specified and directed. |
| 121 | S & F in replacement of modular two way switch 6 Amps, 1 module ISI marked complete all as specified and directed. |
| 122 | S & F in replacement of modular socket single pole one way 16 Amp-2/3 PIN, 2 module ISI marked complete all as specified and directed. |
| 123 | S & F in replacement incl making existing surface good sheet metal enclosures with socket plug top and MCB's with two pin and earth plug and socket complete with one single pole MCB 240 V grade 20 Amp.(A/C Box) complete all as specified and directed. |
| 124 | M&L for study lamp moveable type 9 watt complete all as specified and directed. |
| 125 | Taking down any type of Ext fan, ceiling fan cable end, dismantling blades and removing fan and blades to E/M store complete all as specified and directed. |
| 126 | S & F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all specified and directed. |
| 127 | S & F exhaust fan made of meatllic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 450 mm complete all specified and directed. |
| 128 | S & F in replacement LED batten luminaire surface/wall mounted ,4 feet 20 Watts comprise of aluminium extruded with anodised with powder coated in white colour with decorative end cap. The luminare is pre-wired with high efficiency electronic driver, with lifetime of 50000 burning hours . CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6000 to 6500K, surge protection DM-4KV & CM-3KV, IP-40 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 140 to 300 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 120 lm/w, filiker free and including connecting up with PVC sheathed suitable size copper conductor with push type cable connector 2/3 pin cable connector from ceiling rose to fitting fixed with 2 years of replacement warranty on fittings complete all as specified and directed. |
| 129 | S&F in replacement of LED Building security light fitting 30W new generation energy saving and environmental friendly long life made up of pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC cover in the front and lens for batwing likght distribution or having TOP opening seprate driver compartment with IP 66 protection and impact resistance of IK07 for mounting existing bracket complete including all accessories pre-wired with 3 X 1.5 sqmm single core multistranded copper conductor cable up to celing rose/ terminal box and proper earthing connection must be provided, complete all as specified and directed. |
| 130 | S & F in replacement Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body complete all as specified and directed. |
| 131 | M & L Submain wiring with three run single core 10 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 volts grade in concealed New PVC conduit 25 mm dia ISI marked alongwith one run of 10 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main DB and testing on completion etc complete all as specified and directed.Note: Three runs of 10 sqmm cable and one run of PVC conduit shall be measured as one RM. |
| 132 | M & L Submain wiring with two run single core 6 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 volts grade in concealed New PVC conduit 25mm dia ISI marked alongwith one run of 6 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main DB and testing on completion etc complete all as specified and directed.Note: Three runs of 6 sqmm cable and one run of PVC conduit shall be measured as one RM. |
| 133 | M&L for sub main wiring with two run of 4 sqmm size PVC insulated multi stranded copper conductor fire retardanr cable (Nominal area) and one run of 4 sqmm size PVC insulated unsheathed solid core copper conductor cable drawn in either existing or new surface/ recessed steel/ PVC conduit/ PVC casing capping of required size complete all as specified and directed. Note: Three runs of 4 sqmm cable and one run of PVC conduit shall be measured as one RM. |
| 134 | Material & Labour for sub main wiring with two run of 2.5 sqmm size PVC insulated multi stranded copper conductor fire retardanr cable (Nominal area) and one run of 2.5 sqmm size PVC insulated unsheathed solid core copper conductor cable drawn in either existing or new surface/ recessed steel/ PVC conduit/ PVC casing capping of required size complete all as specified and directed. Note: Three runs of 2.5 sqmm cable and one run of PVC conduit shall be measured as one RM. |
| 135 | M& L for dismantling of solar water heater and its accessories along with electric connection, water connection, solar rod and refixing of solar water heater in its original position after roof treatment with complete connection and testing complete all as specified and directed. |
| 136 | S&F in replacement of VTPN DB 4 way, with 200 A rated bus bar, acrylic double door with 100 Amp, 25 KA, 4 pole MCB as incomer and cement spill protector(Vertical type double door, 100 A MCCB rate inclusive) 200 Amp rated bus-bar and suitable for SP/TP DB in outgoing, enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 protection including wooden rectangle board of first quality of suitable size for mounting of DB box with provision for 4 Pole MCB* as incomer and SP/TP MCB's as outgoings complete all as specified and directed.. Note: - Contractor must provides IP43 certificate. |
| 137 | S&F in replacement of SPN DB 12 way with 200 Amp rated bus bar, IP 43, acrylic double door complete all as specified and directed. Note: - Contractor must provides IP43 certificate. |
| 138 | S&F in replacement of SPN DB 8 way with 200 Amp rated bus bar, IP 43, acrylic double door complete all as specified and directed. Note: - Contractor must provides IP43 certificate. |
| 139 | S & F in replacement of amp rating 240V 10 KA'B' curve MCB SPN 40 A current carrying capacity in the MCB DB complete with connection testing and commissioing complete all as specified and directed. |
| 140 | S & F in replacement of MCB single pole 6 to 32 Amps 240 V with thimble suitable for wires complete all as specified and directed. |
| 141 | Earthing complete with galvanised iron earth plate electrode 60cm x 60cm x 6mm thick , burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised steel wire 4 mm dia by means of galvanised nuts, bolts, check nuts and washers including excavation and earth work, with precast PCC 1:3:6 type C-2 pit, PCC pit cover 1:2:4 type B-1 with handle, GI protection pipe 15 mm bore light grade and 20 mm medium grade GI watering pipe, Funnel , wire mesh etc complete as shown in electrical Plate No.3 of SSR Part-I connected to earthing test point and metal part all as specified including testing on completion complete all as specified and directed. |
| 142 | Supplying laying in trenches and fixing along the poles or passing through pipes or laid under floor of through walls etc jointing and testing LT Cross Linked Polythene Insulated(XLPE insulated) galvanized steel strip armored electric cable 1100 volt grade heavy duty ISI marked with aluminium conductor and overall served with an outer sheath of PVC, of cross sectional area including cable glands made out of finned brass double compression type of size 35 Sqmm 3.5 Core complete all as specified and directed. Note :- Excavation/road cutting, earthwork, Sand Cushioning, Cable covers, Pipe for cable protection to be measured and paid for separately. |
| 143 | Excavation or road cutting in trenches not exc 1.5m wide and not exc 1.5M depth for laying of cable, getting out including forming bottom surface to required level and gradient in hard/dense soil.complete all as specified and directed. |
| 144 | M&L for Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in hard/dense soil. complete all as specified and directed. |
| 145 | Removing excavated material/soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and directed. |
| 146 | M & L for sand cushioning with dry river sand in trenches for cushioning of underground cable line including spreading, leveling, well ramming complete all as specified and directed.Note : Punned thickness only shall be measured and paid. |
| 147 | Supplying and laying unreinforced precast concrete cable cover, class LV, type 1 with peak, size 250mm X 150mm X 40mm complete all as specified and directed. |
| 148 | Supply,fixing and laying GI tubing medium grade 25 mm bore with all fitting and fixed complete upto water tank incl taking down, complete all as specified and directed. |
| 149 | M/L for Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of 25 mm complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 24 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender