Tender For Repair & Renovation Of W/S, S/I & S/D System Of Different Res. & Non-Res. Building At Koraput Municipality Under State Plan, D.No.13/4215 For The Year 2026-27
Tender Value
44.08 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
6 days left
EMD
44082
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Koraput → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Renovation Of W/S, S/I & S/D System Of Different Res. & Non-Res. Building At Koraput Municipality Under State Plan, D.No.13/4215 For The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | (Part-A) Repair & renovation of Res. building - 20nos |
| 2 | Dismantling and removing old tiled flooring / dado including removing the bese coarse and stacking the usefull materials for reuse and removing the debries within 50mtr lead. |
| 3 | Dismantling and removing 2.5cm. thick artificial stone flooring including stacking the usefull materials for reuse and removing the debries within 50mtr lead. |
| 4 | Removing old lime or cement plaster from walls including racking out joints 12mm. deep and removing the debries within 50mtr lead. |
| 5 | Dismantling brick or stone masonry in lime or cement mortar under 3mtr. height including stacking the usefull materials for reuse and removing the debries within 50mtr lead. |
| 6 | Cement concrete(1:2:4) with 12mm size hard granite chips |
| 7 | 12mm. thick C.P. in cement mortar (1:6) for brick work. |
| 8 | Fixing tiles (glazed tile) in floors,treads of steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete. (Kajaria/ Jhaonsan/ Orient Bell Make) |
| 9 | Fixing tiles (glazed tile) in dados skirting and risers of steps on 12mm. thick cement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete. (Kajaria/ Jhaonsan/ Orient Bell Make) |
| 10 | Supplying all materials,labour and T&P for fixing water closet (I.W.C. or E.W.C) duly embedded in cement concrete (1:3:6) using 12mm. size h.b.g. chips. (Jaguar/ Hindware/ Cera Make) |
| 11 | Orissa pan |
| 12 | \\"P\\" trap |
| 13 | Supplying all materials,labour and T&P for fixing 10 ltr capacity low level cistern with fitting such as siphonic arrangement,15mm. nominal size PVC ball valve with polythene float chromium plated brass handle, unions and couplings for connection with inlet, outlet and over flow pipes, 40mm.dia. porcelain enamelled flush bend, 12mm. dia. PVC inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and the inlet pipe with supply main etc. all complete as per specification. |
| 14 | Supplying all materials,labour and T&P for fixing wash hand basin with hole for pillar cock with cast iron /M.S. brackets painted white including cutting holes in walls and making good to the damages etc. all complete as per specification. (Jaguar/ Hindware/ Cera Make) |
| 15 | Wash hand basin (550x450mm.) |
| 16 | Pedestal for wash hand basin |
| 17 | Supplying all materials,labour and T&P for fixing (600mmx450mm.) bevelled edge mirror of superior glass mounted on 6mm. thick A.C. sheet or ply-wood sheet and fixed to wooden plugs with chromium plated brass screws and washers etc.all complete as per specification (Cera/ Plaza/ Parryware make) |
| 18 | Supplying all materials,labour and T&P for fixing kitchen sink/ laboratory sink with cast iron /M.S. brackets painted white including cutting holes in walls and making good to the damages etc. all complete as per specification (600x450x200mm.) (Cera/ Plaza/ Parryware make) |
| 19 | Supplying all materials,labour and T&P for fixing cromium plated brass shower rose with 15mm. or 20mm. inlet including polishing etc. all complete as per specification. 100/50mm.dia. Shower rose with arm (Cera/ Plaza/ Parryware make) |
| 20 | Supplying all materials,labour and T&P for fixing standard size C. P. towel rail, soap holder etc. fixed to wooden plugs with chromium plated brass screws and washers etc. all complete as per specification. (Cera/ Plaza/ Parryware make) |
| 21 | C.P. towel rail (20mm.diax600mm.) |
| 22 | c p towel ring |
| 23 | cp soap holder |
| 24 | ai glass self |
| 25 | Supplying all labour and T&P for fixing C.P. fittings of the following size as per specification all complete. (Jaguar make) |
| 26 | 15mm. dia.C.P. Bib cock (Long body) |
| 27 | 15mm. dia.C.P. Bib cock (Short body) |
| 28 | 15mm. dia.PVC bib cock |
| 29 | 15mm. dia.C.P.Angle cock |
| 30 | 15mm.dia.C.P. stop cock(concealed) |
| 31 | Jet Spray S.S. Jet |
| 32 | C.P. Gratting |
| 33 | 32mmx 1150mm long PVC waste pipe |
| 34 | 15mmx600mm PVC connection pipe |
| 35 | Brickwork with Fly Ash bricks in cement mortar (1:6) in Foundation and Plinth |
| 36 | 16mm. thick C.P. in cement mortar (1:6) for brick work. |
| 37 | Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge. |
| 38 | Filling foundation and plinth with sand watered and rammed. |
| 39 | Cement concrete (1:4:8) with 4cm size hard granite metal |
| 40 | Supplying all materials, labour, T&P for fitting and fixing of MS angle / MS pipe for supporting of G.C.I. Sheet as per specification and direction of E.I.C. 2\\" MS Angle |
| 41 | Supplying all materials,labour and T&P for fixing G.C.I. sheet in roof drilling holes in wind ties including fixing of ridges valleys wind ties etc. complete. |
| 42 | Cement concrete (1:1½:3) for R.C.C. works with 12mm size hard granite chips including hoisting and laying. |
| 43 | M.S. Reinforcement for R.C.C. works including cutting,bending, binding and tying grills and placing in position including cost of M.S.Rods, binding wire 18 to 20 gauge. |
| 44 | Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor. |
| 45 | Distempering two coats with any approved shade over a coat of primer (Using Asian paint weather Coat Apex Ultima - 04 Year Warranty ) |
| 46 | Painting two coats with approved weather seal coat over a coat of primer (Using Asian paint weather Coat Apex Ultima - 04 Year Warranty ) |
| 47 | (Part-B) |
| 48 | Supplying all materials,labour and T&P for constructing septic tank with R.C.C. top slab in (1:1.5:3 ) mix with foundation concrete (1:2:4 ) inside plaster 12mm. thick with cement mortar (1:3) finished with neat cement punning, 12mm. thick out side plaster (1:3),brick work with K.B. bricks with crushing strength not less than 75kg/sqcm. in cement mortar (1:3) finished smooth complete as per specification.5 users' Septic Tank size [1.5x0.75x1.80mtr.] |
| 49 | Supplying all materials, labour and T&P for construction of 1.20mtr.dia.x2.55mtr. Deep soak-way pit with dry brick walling up to 2.10mtr. height and bbrick work with cement mortar (1:6) for 0.45mtr. height of wall at top,cement plaster (1:3) inside and outside,inside filled with dry brick khoa of 50mm.to 100mm.size to a height of 2.00mtr.from bottom, covered by means of 40mm.thick R.C.C. perforated slab, 50mm.thick R.C.C.well cover in pieces fitted with iron rings including earth work in excavation and refilling of cavity around the pit etc. all complete as per approved design and drawing. (1.20mtr.dia.x2.55mtr.) |
| 50 | Supplying all materials, labour and T&P for construction of inspection chamber as per P.H. specification and design all complete. (0.75x0.75x0.45mtr.) |
| 51 | Supplying all materials, labour, T&P and fixing PVC pipes (4Kg/Cm2) and fittings to walls with nails, bobiins and wooden plugs as per P.H. sepcification. |
| 52 | 110mm dia PVC Pipe |
| 53 | 90mm dia PVC Pipe |
| 54 | 75mm dia PVC Pipe |
| 55 | Supplying all materials,labour and T&P for fitting and fixing of following PVC fitting all complete as per specification and direction of E.I.C. |
| 56 | 110mm PVC Vent pipe |
| 57 | 110mm PVC cowl |
| 58 | 110mm PVC DoorTee |
| 59 | 110mm PVC Plain Bend |
| 60 | 90mm PVC DoorTee |
| 61 | 90mm PVC Plain Bend |
| 62 | Supplying all materials,labour and T&P for fixing bowl pattern urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp etc. all complete as per specification. (Cera/ Plaza/ Parryware make) |
| 63 | Supplying all materials,labour and T&P for fixing glazed earthen-ware squatting plate of size (600x350mm.) with integral longitudinal flushing pipe including embedding the plate in 25mm. cement mortar (1:8) laid over 150mm. cement concrete (1:3:6) using 12mm. size h.b.g. chips all complete as per specification (Cera/ Plaza/ Parryware make) |
| 64 | Supplying all materials, Labobour, T&P and fixing of PVC choukat with door including fitting and fixing of Aluminum aldrop, tower, bolt, door handle hinges etc. |
| 65 | Supplying all materials, Labobour, T&P and fixing of ACP choukat with door including fitting and fixing of Aluminum aldrop, tower, bolt, door handle hinges etc. |
| 66 | Supplying all materials, labour and T&P and fixing to walls,ceiling and floor unplasticized PVC pipes conforming to [ASTM-D-1785/89,Sch-80.],the following nominal diameter with fittings and clamps including testing as per specification all complete. |
| 67 | 20mm dia PVC pipe |
| 68 | 15 MM PVC PIPE |
| 69 | Supplying all materials, labour and T&P and laying in trenches, unplasticized PVC pipes conforming to [ASTM-D-1785/89,Sch-80],the following nominal diameter and fittings including testing as per specification all complete. |
| 70 | 25mm dia PVC pipe |
| 71 | Supplying all materials, labour and T&P and laying in trenches, HDPE pipes the following nominal diameter and fittings including testing as per specification all complete. |
| 72 | 1\\" dia HDPE pipe |
| 73 | 3/4\\" dia HDPE PIPE |
| 74 | 1/2\\" dia HDPE PIPE |
| 75 | Supplying all materials, labour, T&P for fixing PVC waster storage tank including cutting holes through the tank and fixing G.I. pipes and fittings and providing extra socket, jam nut, fixing ball valves etc. including hoisting up to a height of 5mtr. above ground level and placing the tank to the required position all complete as per specification and direction of Engineer in charge including cost of PVC tank and ball valves, copper ball etc. complete. (Plasto/ Supreme make) |
| 76 | 500 liter PVC O.H. Tank fitting |
| 77 | 1000 liter PVC O.H. Tank fitting |
| 78 | Supplying all labour and T&P for fixing PVC fittings of the following size as per specification all complete. |
| 79 | 25mm dia PVC fullway valve |
| 80 | 20mm dia PVC fullway valve |
| 81 | 15mm dia PVC fullway valve |
| 82 | 25 mm Ball Cock with Rod & Ball |
| 83 | 20 mm Ball Cock with Rod & Ball |
| 84 | 15 liter capacity Geyser (Havells/ V-Guard/ Symphony/ Hindware make) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender