Tender For Construction Of Primary Health Centre At Rinchenpong Under Soreng District.
Tender Value
6.92 Crore
Estimated cost
Bid Submission
19 Nov 2026
21 days left
EMD
17.30 Lakhs
Bank guarantee accepted
Document Fee
1 Lakhs
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
West District → Sikkim
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Primary Health Centre At Rinchenpong Under Soreng District.
BOQ
| Sl. No. | Item Description |
| 1 | Site levelling protective work |
| 2 | Excavation in soil in hilly area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead up to 1000 meters |
| 3 | Excavation in soil in hilly area by manual means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 50 meters. |
| 4 | Providing & laying Plum concrete in 1 : 2 :4c.c. (1 cement, 2 clean coarse sand, 4 clean hard graded stone chips of 40 mm down nominal gauge) with 50% clean hard stone of sizes not execeeding 15 cm including shuttering, compacting and curing complete. |
| 5 | Providing and laying hand packed stone soling in building works with clean hard selected stones all complete. |
| 6 | Providing & Laying in position cement concrete of 1:2:4 mix. (1 cement, 2coarse sand, 4 graded stone aggregate of 20mm & down size) including compacting curing etc. all complete. |
| 7 | Filling with available excavated earth in trenches, plinth and side of foundation in building works with layers not exceeding 20cm in depth including consolidation of each layer by ramming, watering etc, all complete. |
| 8 | Providing and laying hand packed stone filling in building works with clean hard selected stones, all complete. |
| 9 | Providing and fixing 4\\" x 3\\" railing made of Hollowtubes, channels, plates etc., including welding, grinding, buffing, polishingand making curvature (wherever required) and fitting the same with necessal nuts and bolts complete, i/c fixing the railing with necessary accessories including applying priming coat and painting all complete |
| 10 | Providing box drain of 30 cm (ht) x 45 cm (width) internal dimension with 1:2:4 Plum concrete (20mm & down) in side walls thickness of 23 cm (hill side) and 30 cm (road side) and 1:3:6 (20 mm & down) base concrete of thickness of 15 cm with standard specification over 15 cm stone soling including providing & laying guard stones complete, as per the direction of the Engineer in Charge. |
| 11 | Providing Fitting and Fixing of Angle iron Grating of 35 mmx 35mm x 5 mm including welding fixing with nut and bolt and applying red oxide primer and painting all complete as per the direction of Engineer in charge |
| 12 | Haulage for stock material via Surfaced Road for the distance of 40km excluding loading and unloading all complete. |
| 13 | Loading and Unloading of Cement or Steel by Manual Means and Stacking. |
| 14 | Haulage for Fine Aggregate via surfaced road for the distance of 50km excluding loading and unloading all complete. |
| 15 | Haulage for Coarse aggregate via Surfaced Road for the distance of 50km excluding loading and unloading all complete. |
| 16 | Haulage for throwing away of excavated earth via Surfaced Road for the distance of 20 km excluding loading and unloading all complete. |
| 17 | Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/ Kanker/ Moorum |
| 18 | Buildings |
| 19 | Earth in excavation in mixed soil in foundation trenches i/c dressing of sides, disposal of excavated earth upto 30m lead and 1.5m lift all complete. |
| 20 | P/L hand packed stone soling with clean, hard selected stones all complete. |
| 21 | P/L 1:2:4 mix cement concrete base i/c curing, compacting etc all complete.(20 mm down size agrigate) |
| 22 | P/L C.R.S.M wall with clean hard selected stones in 1:4:8 mix c.c i/c curing etc all complete. |
| 23 | Mixed filling inside plinth with consolidated layers i/c watering, ramming etc. all complete |
| 24 | P/L 1:1.5:3mix reinforced cement concrete ia all R.C.C works i/c curing, compacting etc all complete. |
| 25 | S/B/B in position tor steel and mild steel reinforcements in all R.C.C works i/c cost of binding wires etc all complete. |
| 26 | Columns |
| 27 | Tie Beams |
| 28 | Staircase |
| 29 | P/F/F in position dressed local wood for chowkhats of doors and windows etc all complete. |
| 30 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension . (Area of window above 1.75 sqm upto 2.50 sqm). |
| 31 | Providing & fixing M.S. Grills in timber frames of windows with MS flats with nuts,bolts and smooth finishing of welded joints /surfaces with grills weighing 8Kg/m2 all comp. |
| 32 | P/F/F in position water proof flush door shutters, solid block hard core constructio with frame of 1st class hard wood with well matched 3mm commercial ply on both faces of shutters i/c steel butt hinges, screws etc all complete,32 mm. |
| 33 | P/F/F sliding door bolts of 300 x 16mm brass (bright finish) with nuts and screws etc all complete. |
| 34 | Providing and fixing mortise lock with dead bolt and a pair of lever handles for W.C Bath room with necessary screws etc complete.Brass (C.P) (Godrej) |
| 35 | P/F/F tower bolts of 200 x 10mm brass (bright finish) with nuts and screws etc all complete. |
| 36 | Providing and Laying first class brick work in one brick thick in superstructure of standard size bricks with 1:5 cement mortar (1cement and 5 clean coarse sand) as per the direction of Engineer in Charge including curing etc all complete. |
| 37 | Providing and Laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 coarse sand) as per the direction of Engineer in Charge including curing etc all complete. |
| 38 | Providing and Laying white or colored glazed vitrified tiles Pearl (white, marvel Atlanta, jet black etc or equivalent) in flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 39 | Providing and Laying white or colored glazed tiles anti skid ( elegant, cashmere, Egyptian rustic, celebrity, lara etc or equivalent) of glossy series or celebrity, elegant or equivalent in flooring, treads of steps landing etc of size 300mm x 300mm laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 40 | Providing and Laying white or colored or ceramic glazed tiles of size 200mm x 300mm luster printed ( loreno, bronzo,colubia or equivalent) in skirting, risers of steps and Dados on 12mm thick cement plaster (1cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry. |
| 41 | Providing and Laying Chequers tiles in on flooring over 12mm thick cement plaster (1cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry. |
| 42 | Providing and Laying 15mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing etc all complete. |
| 43 | Providing and laying plaster of paris putty of 2mm thick over lastered surface to prepare the surface even and smooth all complete: |
| 44 | Providing and Laying 20mm thick marble stone in Risers of steps, skirting and pads, walls, pillars etc laid on 10mm thick base c.m. 1:3 and joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete (Zebra black marble or equivalent) |
| 45 | Supplying, fabricating, fitting and fixing tubular truss including putty, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc complete in curve shaped Sikkim- style roofing as per the standard specification and design and as per the direction of Engineer - in- Charge all complete. |
| 46 | Providing, fitting, fixing of 24 BWG prepainted (HULLAS) sheet roofing with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with epoxy in each bolts (8 to 10 gm per bolt) including coat of approved steel primer and two coats of approved paint, on overlapping of sheet excluding carriage complete. |
| 47 | Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG Pre-painted HULAS Sheet fixed with G.I, J or L hooks bolts and nuts 8mm dia Limpets, Bitumen washers complete. |
| 48 | Providing fitting and fixing 16mm thick valley of 90cm overall width in plain Pre-painted HULAS sheet class I fixed with GI J or L hooks, bolts and nuts 8mm dia GI limpet and bitumen washers complete. |
| 49 | Providing, fitting and fixing 23cm deep 24BWG Pre-painted HULAS. sheet eaves board including (50mmx25mm) dressed sal timber beading and M.S. Rod brackets all complete. |
| 50 | Providing and fixing 15cm wide 45cm overall semicircular G.P sheet (Class I) gutter with iron brackets 40x3mm size, bolts, nuts, washers etc including making, connection with rain water pipes. |
| 51 | Providing, fitting, fixing of 24 BWG GP sheet roofing by making corrugation of 50mmx50mm x50mm on both side with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with white bad including coat of approved steel primer and two coats of approved paint, on overlapping of sheet excluding carriage all complete. |
| 52 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre,, excluding the cost of painting with :PVC ceiling board with different size and pattern as approved by the Engineer- in-charge and as per manufacturer's specification. |
| 53 | Providing U shaped drain of 23cm (ht) x 23 cm (width) of internal dimension with 1:2:4 Plum concrete (40mm & down) side wall thickness of 23 cm on both side with 1:3:6 (20 mm & down) base concrete of thickness of 15 cm with standard specification over 15 cm stone soling including 1:3 cement plaster with neat cement polishing & rounding of junction, as per the direction of the Engineer in Charge. |
| 54 | Providing box drain of 30 cm (ht) x 45 cm (width) internal dimension with 1:2:4 Plum concrete (20mm & down) in side walls thickness of 23 cm (hill side) and 30 cm (road side) and 1:3:6 (20 mm & down) base concrete of thickness of 15 cm with standard specification over 15 cm stone soling including providing & laying guard stones complete, as per the direction of the Engineer in Charge. |
| 55 | lead door (3.5 x 7) |
| 56 | lead window (2 x 3) |
| 57 | Providing and applying priming coat with ready mixed pink on timber works i/c preparation of the surface by thoroughly cleaning and sand papering etc. complete. |
| 58 | Providing and painting with ready mixed paint of approved quality and shade with two or more coats to give an even and smooth shade including clearing the surface complete on new surface. |
| 59 | Providing and laying plaster of paris putty of 2mm thick over plastered surface to prepare the surface even and smooth all complete: |
| 60 | Distempering with dry distemper on New surface two or more coats of required shade to give an even and uniform shade including priming coat of whiting to give an even shade after thorough cleaning of dirt, dust, loose pieces of scabs, grease etc including surface preparation by sand papering etc complete. New surface |
| 61 | Providing and Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL, WEATHER SHIELD to give an even shade including brushing the surface clean of dirt, dust etc and sand papering and filling the scratches complete on New surface. |
| 62 | Providing, fitting and fixing in position collapsible steel shutter with vertical channel (20x10x2)mm and braced with flat iron diagonals (20 x 5)mm size with top and bottom rail of T-iron (40x40x6)mm with 40mm dia steel pulley complete with bolts, nuts, locking arrangements, stoppers and handles including applying of priming coat of approved steel primer as per the direction of Engineer - in- Charge all complete: |
| 63 | Provision for providing steel railing in ramp and stairs etc all complete. |
| 64 | Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum. |
| 65 | Cost of Haulage Excluding Loading and Unloading |
| 66 | Loading and Unloading of Cement or Steel by Manual Means and Stacking. |
| 67 | Cost of Haulage Excluding Loading and Unloading |
| 68 | Water supply and Sanitatios |
| 69 | Providing, Fitting and fixing GI pipe of medium class, (excluding trenching, refilling, compacting and the cost of fittings) all complete |
| 70 | Trench cutting in mixed soil 0.45m in depth and 0.30m in width |
| 71 | Filling with available excavated earth in trenches, plinth and side of foundation in building works with layers not exceeding 20cm in depth including consolidation of each layer by ramming, watering etc, all complete. |
| 72 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. |
| 73 | External work - Exposed on wall |
| 74 | 15 mm nominal dia pipe |
| 75 | 20 mm nominal dia pipe |
| 76 | 25 mm nominal dia pipe |
| 77 | 32 mm nominal dia pipe |
| 78 | Providing Laying and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes and fittings of approved make confirminf to IS 15778 CTS SERIES ASTM D 2846,SDR-11 GRADE having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.0m spacing this includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge including cost of cutting chasess and making good the same in walls and floor etc, incl the piping shall be fixed and concealed by covering thr groove with GI plaster mesh using /as per required gauge and pressure |
| 79 | Internal work- concealed |
| 80 | 15 mm nominal dia pipe |
| 81 | 20 mm nominal dia pipe |
| 82 | 25 mm nominal dia pipe |
| 83 | 32 mm nominal dia pipe |
| 84 | Providing and fixing C.P. brass Wall Mixture of approved quality conforming to IS:specifications of 15 mm nominal bore (CP Brass Wall Mixture) (F200020 of Hind Ware make or equivalent) etc with all accessories fittings ,flanges ,labour etc complete including commisioning testing installation confirming to ISI specifications. |
| 85 | Providing and fixing C.P brass long body bib cock of approved quality confirming to IS standards( Jaquar or equivalent Brand ) |
| 86 | providing and fixing C.P Brass Anglular Stop Cock for basin mixer points of approved quality confirming to is 8931a) ( Jaquar or equivalent Brand ) |
| 87 | Providing and Fixing C P Brass Connecting Pipe of approved quality,High or low pressure with plastic floats etc.,Complete. |
| 88 | Providing and Fixing C P Brass Ball Cock of approved quality,High or low pressure with plastic floats etc.,Complete. |
| 89 | Providing and Fixing Wash Basin with CI Brackets, 15 mm CP Brass pillar taps, 32 mm CP Brass waste to standard pattern including painting of fitting and brackets, cutting and making good on walls wherver require ( , Hindware,Jaquar or Equivalent) |
| 90 | SANITARY FITTINGS. |
| 91 | Providing, fitting and fixing white vitreous china pedestal (European type) water closet (W.C) pan with seat and lid, with C.P. brass hinges, 10ltr low level cistern with fittings and brackets 40mm flush bend, 20mm overflow pipe with specials, including Providing and painting and making good the wall and floors as required all complete: W.C. pan European One pice (Starwhite) CAT NO 92008 |
| 92 | BATH ROOM FITTINGS |
| 93 | Providing and fitting chromium plated toilet paper holder including the making holes and fixed to timber cleats with CP screws washer etc. all complete:. |
| 94 | Providing, fitting and fixing Beveled gauge mirror of superior glass with 6mm A.C. sheets ground and fixed to timber cleats with CP screws, washer etc complete. |
| 95 | Providing, fitting and fixing. of chromium plated soap dish with necessary screw etc all complete. |
| 96 | Providing, fitting and fixing towel rail of chromium plated brass complete with brackets fixed to the timber cleats, CP brass screws complete |
| 97 | Providing and placing on terrace high density polyethylene water storage tank with man hole lid and suitable locking arrangement including making holes for inlet, out let and ball cock including testing etc. all complete: (Sinter or equivalent |
| 98 | Supply and fixing of Type B SWR PVC soil and waste pipes jointed with rubber ring with good quality lubricant for shafts and for drainage lines with solvent cement. As per IS - 13592-1992 for pipes and IS 14735 for fittings, inclusive of all necessary specials like bends, tees, offsets, junctions pan connector,testing etc laid underground with suitable clamps and specials curing etc complete ( including excavating trenches in all sorts of soil of required width for pipes ,cables etc including excavation for sockets and dressing of sides ramming of bottoms depth upto 2.5m including getting out the excavated soil and then returning the soil as required in layers not exceeding 20cms in depth including consolidation danger lighting , pumping put water removing the slush and sullage etc and disposing the surplus excavated earth within a lead of 50m or as directed) |
| 99 | Internal work - Exposed on wall |
| 100 | 300 mm dia. Prince / Supreme or equivalent soil pipe |
| 101 | 200 mm dia. Prince / Supreme or equivalent soil pipe |
| 102 | 160 mm dia. Prince / Supreme or equivalent soil pipe |
| 103 | 100 mm dia. Prince / Supreme or equivalent soil pipe |
| 104 | 75 mm dia. Prince / Supreme or equivalent soil pipe |
| 105 | Providing, fitting and fixing bends of various types plain or a band with access door, insertion rubber washer 3mm thick bolts and nuts complete SCI or centrifugally cost spun sands pipes |
| 106 | Providing, fitting and fixing double equal junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. |
| 107 | Providing, fitting and Installation of 30 Litre Geyser all complete as per he direction of engineer incharge |
| 108 | SEPTIC TANK, SOAK PIT |
| 109 | Excavation in soil in hilly area by manual means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 50 meters. |
| 110 | Providing and laying hand packed stone soling in building works with clean hard selected stones all complete. |
| 111 | Providing & Laying in position cement concrete of 1:3:6 mix. (1 cement, 3 coarse sand,6 graded stone aggregate of 20mm & down size) including compacting curing etc. all complete. |
| 112 | Providing & Laying in position 1:1.5:3 mix (1cement, 2 coarse sand 4 graded stone aggregate 20mm and down nominal gauge) reinforced cement concrete of nominal mix excluding the cost of form work, finishing & reinforcements of cement) as per the direction of Engineer in Charge. |
| 113 | Providing, fixing and removing form work for casting R.C.C items as indicated below: (with locally available) |
| 114 | Floor slab, roof slab, landing, balcony & access platform. |
| 115 | Wall (Saptic tank, Soak pit, Septic baffle) |
| 116 | Supplying, bending and placing in position of Tor steel reinforcement in all R.C.C works i/c cost of binding wires all complete. |
| 117 | Haulage for stock material via Surfaced Road for the distance of 30 km excluding loading and unloading all complete. |
| 118 | Loading and Unloading of Cement or Steel by Manual Means and Stacking. |
| 119 | Haulage for Fine Aggregate via surfaced road for the distance of 50km excluding loading and unloading all complete. |
| 120 | Haulage for Coarse aggregate, via Surfaced Road for the distance of 50km excluding loading and unloading all complete. |
| 121 | Haulage for throwing away of excavated earth via Surfaced Road for the distance of 20 km excluding loading and unloading all complete. |
| 122 | Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/ Kanker/ Moorum/ excavated earth. |
| 123 | Dismentalling of old structure |
| 124 | Demolishing cement concrete manually/ by mechanical meansincluding disposal of material within 50 metres lead as per directionof Engineer - in - charge. |
| 125 | Demolishing stone rubble masonry manually/ by mechanical meansincluding stacking of serviceable material and disposal ofunserviceable material within 50 metres lead as per direction ofEngineer-in-charge |
| 126 | Demolishing R.C.C. work manually/ by mechanical means includingstacking of steel bars and disposal of unserviceable material within50 metres lead as per direction of Engineer - in- charge |
| 127 | Extra for cutting reinforcement bars manually/ by mechanical meansin R.C.C. or R.B. work as per direction of Engineer -in -charge |
| 128 | Extra for scrapping, cleaning and straightening reinforcement fromR.C.C. or R.B. work |
| 129 | Demolishing brick work manually/ by mechanical means includingstacking of serviceable material and disposal of unserviceablematerial within 50 metres lead as per direction of Engineer-in-charge |
| 130 | Demolishing brick work manually/ by mechanical means includingstacking of serviceable material and disposal of unserviceablematerial within 50 metres lead as per direction of Engineer-in-charge |
| 131 | Removing mortar from bricks and cleaning bricks including stackingwithin a lead of 50 m (stacks of cleaned bricks shall be measured |
| 132 | Demolishing Tiles work/Mosaic/Cement Concrete in flooring laid in cement mortar includingstacking of material and within 50 metres lead |
| 133 | Dismantling wood work in frames, trusses, purlins and rafters up to10 metres span and 5 metres height including stacking the materialwithin 50 metres lead |
| 134 | Dismantling doors, windows and clerestory windows (steel or wood)shutter including chowkhats, architrave, holdfasts etc. complete andstacking within 50 metres lead |
| 135 | Taking out doors, window and clerestory window shutter ( steel or wood) including stacking within 50 lead |
| 136 | Dismantling of CI or Asbestos rain water pipe with fitting and clamps including stacking the material within 50 m lead |
| 137 | Labour engaged in loading and stacking of all dismantled and demoslished material including steel, concrete , stone bouilder at a distance of 50 to 100 m all completed and cleaning all area for new constrictiom |
| 138 | Provision for transportation and throwing all dismanted and demolished at a distance of 30 to 40 km at notified space all complete |
| 139 | Yard development and car parking |
| 140 | Excavation in soil in hilly area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead up to 1000 meters |
| 141 | Providing & laying Plum concrete in 1 : 2 :4 c.c. (1 cement, 4 clean coarse sand, 8 clean hard graded stone chips of 40 mm down nominal gauge) with 50% clean hard stone of sizes not execeeding 15 cm including shuttering, compacting and curing complete. |
| 142 | Preparation and Surface Treatment of formation. (Preparation and surface treatment of formation by removing mud and slurry, watering to the extent needed to maintain the desired moisture content, trimming to the required line, grade, profile and rolling with 8-10 tonne smooth wheeled roller, complete as per clause 310.) |
| 143 | Granular Sub-Base with Coarse Graded Material ( Table:- 400- 2) (Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401) |
| 144 | Water Bound Macadam (Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness 100mm, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density.) By Manual Means |
| 145 | Prime coat (Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate shown in 500-1 using mechanical means.) |
| 146 | Bituminous Penetration Macadam (Construction of penetration macadam over prepared Base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a smooth wheeled steel roller 8-10 tonne capacity to achieve the desired degree of compaction) |
| 147 | Providing and laying parapet of standard size on 1:2:4 (1cement, 2coarse sand, 4clean hard graded stone chips of 20 mm down nominal gauge) plum concrete and plastering with 1:4 mix cement mortar of 12mm thick with recron 3S with lime washing three or more coats, complete as per the direction of the Engineer- in- Charge. |
| 148 | Providing and laying standard 'V' shaped drain with cement concrete base in 1:2:4 (1 cement, 2 clean coarse sand, 4 stone chips 20mm and down) mix of 100mm thick over clean hard selected stones soling of 150mm thick and 1:2:4 (1 cement, 2 clean coarse sand, 4 stone chips 40mm and down) mix plum concrete along the vertical side of thickness 150mm and depth 450mm including curing, compacting, as per the direction of the Engineer- in - Charge. |
| 149 | CARRAIGE for stock material via Surfaced Road for the distance of 30 km excluding loading and unloading all complete. |
| 150 | Loading and Unloading of Cement or Steel by Manual Means and Stacking. |
| 151 | CARRIAGE for Sand via Surfaced Road for the distance of 50km excluding loading and unloading all complete. |
| 152 | Haulage for STONE CHIPS via Surfaced Road for the distance of 50km excluding loading and unloading all complete. |
| 153 | CARRIAGE OF Stone via Surfaced Road for the distance of 50km excluding loading and unloading all complete. |
| 154 | Loading and Unloading of Stock & Non Stock material . |
| 155 | Provision for Furniture |
| 156 | Section 'A' Internal Electrification |
| 157 | Wiring for light/fan/call bell & 6A plug points with 2x1.5 sqmm FRLSH PVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 1x1.5sqmm FRLSH PVC insulated copper conductor single core cable as required. |
| 158 | Wiring for 16 A plug point with 2x 2.5 sqmm FRLSH PVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 1x 2.5 sqmm FRLSH PVC insulated copper conductor single core cable as required. |
| 159 | Wiring for light/Fan/Call bell & 6 A plug point with 2x2.5 sqmm FRLSH PVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 1x 2.5 sqmm HR FRLS PVC insulated copper conductor single core cable as required. |
| 160 | Wiring for sub-main for 16 amps (2x1000W) plug points with 2x4.0 sqmm FRLSH PVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 1x4.0 sqmm FRLSH PVC insulated copper conductor single core cable as required. |
| 161 | Wiring for sub-main with2x 6.0 sqmm FRLSH PVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with1x 6.0 sqmm FRLSH PVC insulated copper conductor single core cable as required. |
| 162 | Wiring for main with 2x 10.0 sqmm FRLSH PVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 1x 10.0 sqmm FRLSH PVC insulated copper conductor single core cable as required. |
| 163 | SECTION 'B' :- SWITCH, SOCKET & ACCESSORIES. |
| 164 | Supplying & fixing 06 amps 1 way FT switch on white moduler plate and metal flux box including connection etc. as required. |
| 165 | 1 no. 06 amps FT switch with 1 no white 1 moduler plate and 1 moduler metal flux box. |
| 166 | 2 no. 06 amps FT switch with 1 no white 2 moduler plate and 2 moduler metal flux box. |
| 167 | 3 no. 06 amps FT switch with 1 no white 3 moduler plate and 3 moduler metal flux box. |
| 168 | 4 no. 06 amps FT switch with 1 no white 4 moduler plate and 4 moduler metal flux box. |
| 169 | 6 no. 06 amps FT switch with 1 no white 6 moduler plate and 6 moduler metal flux box. |
| 170 | 8 no. 06 amps FT switch with 1 no white 8 moduler plate and 8 moduler metal flux box. |
| 171 | Supplying & fixing 1 no. 2 way switch with 1 no 1 module white plate & 1 no 1module metal flux box including connection etc. as required. |
| 172 | Supplying & fixing 1 no. 16 amps socket, & 16 amps switch,white plate (4/3 module) & Metal flux box (4/3 module) including connection etc. as required. |
| 173 | Supplying & fixing 1 no. 06 amps socket with 1no. 06 amps switch, 1 no. 3 module white plate & 1 no. 3 module metal flux box including connection etc. as required. |
| 174 | Section \\"C\\":- Light Fitting & Accessories |
| 175 | Supplying & fixing recessed mounted LED panel light fitting 2ft x 2ft 36 watts including connection etc. as required. |
| 176 | Supplying & fixing surface LED fitting 12 watts including connection etc. as required. |
| 177 | Supplying & fixing recessed LED fitting 10 watts including connection etc. as required. |
| 178 | Supplying & fixing LED tube light fitting 22 watts 4 ft including connection etc. as required.. |
| 179 | Supplying & fixing LED wall mounting mirror light including connection etc. as required. |
| 180 | Wall mounting fan 18\\" |
| 181 | Supplying, Installation ,testing & commissioning of storage water heater including connection as required. |
| 182 | 15 ltr capacity |
| 183 | Supplying, Installation, testing & commissioning of ventilating fan 250mm including connection as required. |
| 184 | SECTION - `D' :- Distribution syst & lightning conductor |
| 185 | Providing & earthing with 2 mtr. Long safe earthing with T19 electrode & 1 bag back fill chemical compound |
| 186 | Providing & laying 25mm x 5mm copper strip for looping earth from earth electrode fo main distribution board of the building |
| 187 | Providing & installing Copper tube type 1m long lightning arrestor having prongs at the top of the arrestor and base plate with nuts & bolts |
| 188 | SECTION 'E' : Panels and Distribution boxes . |
| 189 | L.T distribution switch board with copper bus bar, out-door type Kiosk, having electrolytic annealed copper bus bar 50x12mm for phase & 50x6mm for neutral circuits mounted on glazed porcelain or Bakelite base & fitted with voltmeter, ammeter, selector switches for ammeter & voltmeter, electronic KWH meter, indicating lamps cabin light, fabricated with 12 gauge M.S plain sheet, painted with anti- rust primer & two coats of Epoxy paint of shade 631 as per IS: 8623-1, front opening doors with gasket & locking arrangement complete with following incoming & outgoing controls: LTDB 800 A |
| 190 | INCOMING: 1 No. 800 A, 4P,50KA, MDO ACB. |
| 191 | OUTGOING: 4 Nos. 200A TP MCCB , 50 KA, 1 No. 63 A TP MCCB, 35 KA all with built in Thermo Magnetic Release . |
| 192 | Supplying, installation, testing & commissioning of Miniature circuit breaker (CONFORMING TO CPWD /NBC/ Relevant IS & BIS Code) |
| 193 | Single pole 10 Amps |
| 194 | Single pole 16 Amps |
| 195 | Single pole 20 Amps |
| 196 | Double pole 32 Amps |
| 197 | Double pole 63 Amps |
| 198 | Three pole 32 Amps |
| 199 | Supplying & installation of MCB distribution board Double Door/Single door (CONFORMING TO CPWD /NBC/ Relevant IS & BIS Code) |
| 200 | 12 ways SPN(Double door) |
| 201 | 8 ways SPN (Double door) |
| 202 | SECTION 'F' : laying of 1.1 kv grade cables . |
| 203 | Providing & laying 1.1 KV grade XLPE insulated aluminium armoured conductor cable on surface of the wall of building with required size of aluminium shadle and screw etc. as required. |
| 204 | 3.5 Core x 240 sqmm |
| 205 | 2 Core x 10 sqmm |
| 206 | Termination of cable 3.5 core / 4 core armoured Aluminium cable with required aluminium lugs and compression glands for each end complete in all respect including connection. |
| 207 | 3.5 x 240 sqmm |
| 208 | 2 Core x 10 sqmm |
| 209 | SECTION G: INSTALLATION OF 315KVA, 11/0.43 KV OUTDOOR TYPE DISTRIBUTION SUB-STATION . |
| 210 | 11 Mtrs. Steel lattice structure of 65x65x6mm M.S Angle complete with nuts & bolts . |
| 211 | M.S. Channel 75x40mmx6mmx1.28 mtr long for suppoting D.O.F and G.O.S etc. |
| 212 | M.S. Channel ISLC 100x50x6.4 mmx2.5 mtr. Long for supporting line and transformer. |
| 213 | M.S. Channel ISLC 100x50x6.4 mmx0.46 mtr. Long for supporting main channel of transformer. |
| 214 | Back clamp of 50x6mm M.S. flat for holding the M.S. channel |
| 215 | M.S. nuts & bolts 16mm dia x 40mm length. |
| 216 | M.S. nuts & bolts 16mm dia x 350mm length half threaded. |
| 217 | 11 KV, 3 Pole,200 Amps, Air Break G.O S tilting type, three insulators per phase, complete with all fittings. |
| 218 | 11 KV, 3 Pole, 200 Amps, Dropout fuse unit complete with all accessories. |
| 219 | 9 KV rms, 5 KA single pole unit Metal Oxide Gapeless Surge Arrestor for 11 KV, 50 c/s solidly earthed neutral system with clamps. |
| 220 | 11 KV Disc Insulator70 KN T/C Type (Polymer) |
| 221 | Complete hardware fittings for 11 KV T&C type disc insulator for Weasel conductor |
| 222 | No. 12 SWG G.I wire for continuous earth. |
| 223 | ACSR Weasel conductor. |
| 224 | Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate |
| 225 | T-19 type safe earthing electrode (50 mm dia. x 3mtr.) with one bag back fill chemical compound. |
| 226 | L.T distribution switch board with aluminum bus bar, out-door type Kiosk, having electrolytic annealed Aluminum bus bar 50x12mm for phase & 50x6mm for neutral circuits mounted on glazed porcelain or Bakelite base & fitted with voltmeter, ammeter, selector switches for ammeter & voltmeter, electronic KWH meter, indicating lamps cabin light, fabricated with 12 gauge M.S plain sheet, painted with anti- rust primer & two coats of Epoxy paint of shade 631 as per IS: 8623-1, front opening doors with gasket & locking arrangement complete with following incoming & outgoing controls: |
| 227 | INCOMING: 1 No. 400 A, 4P,50KA, MCCB |
| 228 | OUTGOING: 1 No. 200A TP MCCB, 50 KA ,2 Nos. 100A TP MCCB, 35 KA & 1 No. 63A TP MCCB, 35 KA all with built in Thermo Magnetic Release. |
| 229 | 11 KV danger board of size 8\\"x6\\". |
| 230 | 3.5 core, 240 sq.mm. L.T Alumunium PVC armoured cable from transformer to L.T panel. |
| 231 | 3.5 core, 185 sq.mm. L.T Alumunium PVC armoured cable from L.T panel to line. |
| 232 | 50 HZ, DYN 11, 3 PHASE, ONAN COOLED, OUT-DOOR TYPE DISTRIBUTION TRANSFORMER WITH OFF-CIRCUIT TAPPING +2.5%, +5%, ON H.V SIDE WITH BARE BUSHING ON HV & LV SIDE & PROVIDED WITH STANDARD FITTINGS & ACCESSORIES WITH FIRST FILLING OF TRANSFORMER OIL CONFORMING TO IS:1180(PART-I)2014:ENERGY EFFICIENCY LEVEL -2. 200KVA, 11/ 0.433 KV, Copper Wound |
| 233 | Painting of structure with red oxide paint @ 2 ltr/pole. |
| 234 | Painting of structure with Al. paint @ 1.5 ltr/pole. |
| 235 | Barbed wire @ 2 Kg/pole. |
| 236 | L.T 1.1 KV cable end termination kit for.a)3.5 core 185 sq.mm. |
| 237 | b) 3.5 core 240 sq.mm |
| 238 | G.I barbed Wire |
| 239 | Concreting of 11 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix. |
| 240 | Placement of L.T. distribution board on parapet of size 2x0.61x0.35x 0.61 Mtr. in 1:3:6 ccm including 12 mm thick cement plaster in 1:4 mix. |
| 241 | Concreting of H.T Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit. |
| 242 | Placement of 315 KVA Distribution Transformer on parapet of size 1.2x1.2x1mtrs. In 1:3:6 cc Mix including 12 mm thick cement plaster in 1:4 Mix. |
| 243 | Fencing for 315KVA pole mounted distribution substation of size 2x3 mtrs constructed with 50x50x5 mm MS angle vertical props, 35x35x6 mm MS angle supports(double run),M.S wire mesh, 50x6mm M.S flat iron for clamping wire mesh complete with gate with locking arrangement, site development, concreting of props in 1:2:4 cc i/c soiling and floring works in 1:4:8 cc. |
| 244 | SECTION H: Compound lights . |
| 245 | 9 metre long 410-SP-30 swaged type steel tubular pole with CI base plate and cap, double part (Nut bolt type) Working load 172 kgs |
| 246 | LED Street light 150 Watt |
| 247 | Red oxide metal primer (NEROLAC or equivalent) |
| 248 | Aluminium paint (NEROLAC or equivalent) |
| 249 | Concreting of 9 Mtrs. Lattice structure / swaged steel tubular pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs. pit, construction of parapet 0.61x0.61x0.153 mtrs. in 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 mix. |
| 250 | Excavation of 0.45 x 0.90 x 1.00 m cable trench in mix soil & re-filling with available excavated earth and providing cement concrete on the top of the trench. |
| 251 | Providing & earthing with 2 mtr. Long safe earthing with T19 electrode & 1 bag back fill chemical compound |
| 252 | copper wire 6/8 SWG for earthing lopping system |
| 253 | Changeover Switch 200 Amp 415V |
| 254 | Busbar chamber (copper bar type)4 pole 100 amp |
| 255 | Digital time switch Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender