Tender For Construction Of Primary Health Centre At Namthang Under Namchi District.
Tender Value
6.78 Crore
Estimated cost
Bid Submission
17 Nov 2026
19 days left
EMD
16.97 Lakhs
Bank guarantee accepted
Document Fee
1 Lakhs
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South District → Sikkim
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Primary Health Centre At Namthang Under Namchi District.
BOQ
| Sl. No. | Item Description |
| 1 | Civil Work- PHC |
| 2 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 3 | Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual means) |
| 4 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 5 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 6 | Providing and laying. coarse Rubble Stone Masonry with hammer dressed clean hard selected stone in 1:3:6c.c. (1 cement, 3 sand, 8 clean hard graded stone ships of size 40mm) including bond stone, through stone of size 150mm x 150mm x 450mm manufactured in 1:4:8 (1cement, 4 clean coarse sand, 8 clean hard stone aggregate of size 40 mm and down) and curing etc, complete as per the direction of Engineer in Charge excluding the cost of carriage of materials. |
| 7 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) |
| 8 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). |
| 9 | Supplying, bending and placing in position tor steel reinforcement in all R.C.C works including cost of binding wires, all complete. |
| 10 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber)Foundation base |
| 11 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber)Square columns |
| 12 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber)Beam, lintels, girders, brersumers and cantilevers. |
| 13 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber)Slab |
| 14 | Providing and laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 course sand) including carriage of bricks up to work site, curing etc all complete. |
| 15 | Providing and Laying first class brick work in one brick thick in superstructure of standard size bricks with 1:5 cement mortar (1cement and 5 clean coarse sand) as per the direction of Engineer in Charge including curing etc all complete. |
| 16 | Providing and Laying 15mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing complete. 1:4 (1 cement: 4 fine sand) |
| 17 | Providing & Laying white or colored glazed vitrified tiles of Orient / Somani or equivalent colour in flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 18 | Providing and Laying white or colored glazed tiles anti skid ( elegant, cashmere, Egyptian rustic, celebrity, lara etc or equivalent) of glossy series or celebrity, elegant or equivalent in flooring, treads of steps landing etc of size 300mm x 300mm laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 19 | Providing and Laying white or colored or ceramic glazed tiles of size 200mm x 300mm luster printed ( loreno, bronzo,colubia or equivalent) in skirting, risers of steps and Dados on 12mm thick cement plaster (1cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry. |
| 20 | Providing and Laying 20mm thick granite stone in Risers of steps, skirting and pads, walls, pillars etc laid on 10mm thick base c.m. 1:3 joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete. |
| 21 | Providing, fitting and fixing of dressed sal timber in all types of frames complete |
| 22 | Three track three panels sliding window made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) |
| 23 | Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) |
| 24 | Providing fitting and fixing in position of fully paneled shutters in windows and doors of champ timber or equivalent including steel butt hinges screws 12mm thick panels etc complete.30mm thick panel door |
| 25 | Providing, fitting and fixing water proof flush door shutters, solid block hard core construction with frame of 1st class hard timber with well matched 3mm teak ply decorative type on one faces of the shutters including hinges with screws complete.30mm |
| 26 | Providing and fixing ISI marked oxidised M.S. sliding door bolts withnuts and screws etc. complete : |
| 27 | Providing and fixing bright finished brass tower bolts (barrel type) withnecessary screws etc. complete : |
| 28 | Providing and fixing bright finished brass handles with screws etc.complete:125mm |
| 29 | Supplying, fabricating, fitting and fixing steel tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc as per the standard specification and design and direction of Engineer - in- Charge all complete. |
| 30 | Providing, fitting, fixing of 24 BWG GP sheet roofing by making corrugation of 50mmx50mm x50mm on both side with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with white bad including coat of approved steel primer and two coats of approved paint, on overlapping of sheet excluding carriage all complete. |
| 31 | Providing, fitting, fixing of Eaves Board |
| 32 | Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG Galvanized Sheet fixed with G.I, J or L hooks bolts and nuts 8mm dia Limpets, Bitumen washers complete. |
| 33 | Providing / Fitting / Fixing 25 mm thick false ceiling / paneling of silver fir in wooden frames of timber equivalent to Katus or pakha saaj or equivalent excluding the cost of polishing and including cost of one coat priming on unexposed frame all complete. |
| 34 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 35 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: |
| 36 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 37 | French spirit polishing :Two or more coats on new works including a coat of wood filler |
| 38 | Providing box drain of 30 cm (ht) x 45 cm (width) internal dimension with 1:2:4 Plum concrete (20mm & down) in side walls thickness of 23 cm (hill side) and 30 cm (road side) and 1:3:6 (20 mm & down) base concrete of thickness of 15 cm with standard specification over 15 cm stone soling including providing & laying guard stones complete, as per the direction of the Engineer in Charge. |
| 39 | Cost of Haulage Excluding Loading and Unloading of non stock materials within 60 km.(Stone) |
| 40 | Cost of Haulage Excluding Loading and Unloading of non stock materials within 60 km.(Stone chips) |
| 41 | Cost of Haulage Excluding Loading and Unloading of non stock materials within 60 km.(Sand) |
| 42 | Cost of Haulage Excluding Loading and Unloading of stock materials within 150km.(Cement) |
| 43 | Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum. |
| 44 | Loading and Unloading of Cement or Steel by Manual Means and Stacking. |
| 45 | Provision For traditional design & details |
| 46 | Provision For Stone Cladding |
| 47 | Approach road & parking |
| 48 | Excavation in soil in hilly area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 1000 metres. |
| 49 | Mixed Soil @ 60.00%: |
| 50 | Ordinary Rock @ 20%: |
| 51 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 52 | Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilizing the remaining earth locally for road work.) |
| 53 | Stone Soiling for road works Providing & laying hand packed stone soling of specified thickness with clean hard selected stones including hammer dressing of stone for laying as per required level and camber including packing with broken stones obtained from hammer dressing to fill the voids to give uniform surface as directed by the Engineer-in-Charge all complete but excluding carriage and consolidation using: |
| 54 | Providing and Laying in position cement concrete of 1:3:6 mix (1 cement, 3 coarse sand, 6 graded stone aggregate of 20mm & down size) grade including compacting curing etc all complete. |
| 55 | Providing and laying Coarse Rubble Stone Masonry with hammered dressed clean hard selected stone in 1:3:6 c.c. (1 cement, 3 clean coarse sand, 6clean hard graded stone chips of size 40 mm down nominal gauge) including bond stone, through stone of size 150 mm x 150 mm x 450 mm manufactured in 1:4:8 (1 cement, 4 clean coarse sand, 8 clean hard stone aggregate of size 40 mm and down) curing etc. complete, as per direction of Engineer - in - Charge excluding the cost of carriage of materials. |
| 56 | Providing hand packed filling with clean hard selected stones all complete. |
| 57 | Compacting original ground supporting subgrade (Loosening of the ground upto a level of 500 mm below the subgrade level, watered, graded and compacted in layers to meet requirement of table 300-2 for subgrade construction.) |
| 58 | Granular Sub-Base with Coarse Graded Material ( Table:- 400- 2) (Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401) |
| 59 | For Grading - II Material(Road) |
| 60 | For Grading - II Material |
| 61 | Prime coat (Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate shown in 500-1 using mechanical means.) |
| 62 | Semi - Dense Bituminous Concrete (Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 % of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 508 complete in all respects) |
| 63 | Tack coat (Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at required rate on the prepared bituminous/granular surface cleaned with mechanical broom.) |
| 64 | Stone Edging Providing & laying 15 cm (6\\") wide and 23 cm (9\\") deep hammer dressed stone edging with clean hard selected stones including packing of sides to proper line, level and as per directions of the Engineer-in-Charge, complete. |
| 65 | Providing box drain of 30 cm (ht) x 45 cm (width) internal dimension with 1:2:4 Plum concrete (20mm & down) in side walls thickness of 23 cm (hill side) and 30 cm (road side) and 1:3:6 (20 mm & down) base concrete of thickness of 15 cm with standard specification over 15 cm stone soling including providing & laying guard stones complete, as per the direction of the Engineer in Charge. |
| 66 | Providing and laying parapet of standard size on 1:2:4 (1cement, 2coarse sand, 4clean hard graded stone chips of 20 mm down nominal gauge) plum concrete and plastering with 1:4 mix cement mortar of 12mm thick with recron 3S with lime washing three or more coats, complete as per the direction of the Engineer- in- Charge. 45cm height, 30 cm top and 45 cm bottom |
| 67 | Providing and laying Paver Block all complete |
| 68 | Cost of Haulage Excluding Loading and Unloading of stock material within 100 km all complete. |
| 69 | Loading and Unloading of Cement or Steel by Manual Means and Stacking. |
| 70 | Cost of Haulage Excluding Loading and Unloading of Sand within 30 km all complete. |
| 71 | Cost of Haulage Excluding Loading and Unloading of Stone within 30 km all complete. |
| 72 | Cost of Haulage Excluding Loading and Unloading of Stone chips within 30km all complete. |
| 73 | Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum. |
| 74 | Retaining wall and site development |
| 75 | Excavation in soil in hilly area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 1000 metres. |
| 76 | Mixed Soil @ 60.00%: |
| 77 | Ordinary Rock @ 20%: |
| 78 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 79 | Stone Soiling for road works Providing & laying hand packed stone soling of specified thickness with clean hard selected stones including hammer dressing of stone for laying as per required level and camber including packing with broken stones obtained from hammer dressing to fill the voids to give uniform surface as directed by the Engineer-in-Charge all complete but excluding carriage and consolidation using: |
| 80 | Providing and Laying in position cement concrete of 1:3:6 mix (1 cement, 3 coarse sand, 6 graded stone aggregate of 20mm & down size) grade including compacting curing etc all complete. |
| 81 | Providing and laying Coarse Rubble Stone Masonry with hammered dressed clean hard selected stone in 1:3:6 c.c. (1 cement, 3 clean coarse sand, 6clean hard graded stone chips of size 40 mm down nominal gauge) including bond stone, through stone of size 150 mm x 150 mm x 450 mm manufactured in 1:4:8 (1 cement, 4 clean coarse sand, 8 clean hard stone aggregate of size 40 mm and down) curing etc. complete, as per direction of Engineer - in - Charge excluding the cost of carriage of materials. |
| 82 | Providing and Laying Plum concrete in 1:2:4 c.c. (1cement, 2coarse sand, 4clean hard graded stone chips of 20 mm down nominal gauge) with 70% clean hard stone of sizes not exceeding 15cm including shuttering, compacting and curing complete, as per the direction of Engineer in Charge. |
| 83 | Providing hand packed filling with clean hard selected stones all complete. |
| 84 | Providing box drain of 30 cm (ht) x 45 cm (width) internal dimension with 1:2:4 Plum concrete (20mm & down) in side walls thickness of 23 cm (hill side) and 30 cm (road side) and 1:3:6 (20 mm & down) base concrete of thickness of 15 cm with standard specification over 15 cm stone soling including providing & laying guard stones complete, as per the direction of the Engineer in Charge. |
| 85 | Cost of Haulage Excluding Loading and Unloading of stock material within 100 km all complete. |
| 86 | Loading and Unloading of Cement or Steel by Manual Means and Stacking. |
| 87 | Cost of Haulage Excluding Loading and Unloading of Sand within 30 km all complete. |
| 88 | Cost of Haulage Excluding Loading and Unloading of Stone within 30 km all complete. |
| 89 | Cost of Haulage Excluding Loading and Unloading of Stone chips within 30km all complete. |
| 90 | Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum. |
| 91 | Internal & external water supply & sanitation & septic tank |
| 92 | Providing, Fitting and fixing GI pipe of medium class, (excluding trenching, refilling, compacting and the cost of fittings) all complete |
| 93 | 25mm dia GI Pipe |
| 94 | Trench cutting in mixed soil 0.45m in depth and 0.30m in width |
| 95 | Stone Soiling for road works Providing & laying hand packed stone soling of specified thickness with clean hard selected stones including hammer dressing of stone for laying as per required level and camber including packing with broken stones obtained from hammer dressing to fill the voids to give uniform surface as directed by the Engineer-in-Charge all complete but excluding carriage and consolidation using: |
| 96 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. |
| 97 | 15 mm nominal dia pipe |
| 98 | 20 mm nominal dia pipe |
| 99 | 25 mm nominal dia pipe |
| 100 | 32 mm nominal dia pipe |
| 101 | Providing Laying and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes and fittings of approved make confirminf to IS 15778 CTS SERIES ASTM D 2846,SDR-11 GRADE having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.0m spacing this includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge including cost of cutting chasess and making good the same in walls and floor etc, incl the piping shall be fixed and concealed by covering thr groove with GI plaster mesh using /as per required gauge and pressure |
| 102 | 15 mm nominal dia pipe |
| 103 | 20 mm nominal dia pipe |
| 104 | 25 mm nominal dia pipe |
| 105 | 32 mm nominal dia pipe |
| 106 | Providing and fixing C.P. brass Wall Mixture of approved quality conforming to IS:specifications of 15 mm nominal bore (CP Brass Wall Mixture) (F200020 of Hind Ware make or equivalent) etc with all accessories fittings ,flanges ,labour etc complete including commisioning testing installation confirming to ISI specifications. |
| 107 | Providing and fixing C.P brass long body bib cock of approved quality confirming to IS standards( Jaquar or equivalent Brand ) |
| 108 | providing and fixing C.P Brass Anglular Stop Cock for basin mixer points of approved quality confirming to is 8931a) ( Jaquar or equivalent Brand ) |
| 109 | Providing and Fixing C P Brass Connecting Pipe of approved quality,High or low pressure with plastic floats etc.,Complete. |
| 110 | Providing and Fixing C P Brass Ball Cock of approved quality,High or low pressure with plastic floats etc.,Complete. |
| 111 | Providing and Fixing Wash Basin with CI Brackets, 15 mm CP Brass pillar taps, 32 mm CP Brass waste to standard pattern including painting of fitting and brackets, cutting and making good on walls wherver require ( , Hindware,Jaquar or Equivalent) |
| 112 | SANITARY FITTINGS. |
| 113 | Providing, fitting and fixing white vitreous china pedestal (European type) water closet (W.C) pan with seat and lid, with C.P. brass hinges, 10ltr low level cistern with fittings and brackets 40mm flush bend, 20mm overflow pipe with specials, including Providing and painting and making good the wall and floors as required all complete: W.C. pan European One pice (Starwhite) CAT NO 92008 |
| 114 | BATH ROOM FITTINGS |
| 115 | Providing and fitting chromium plated toilet paper holder including the making holes and fixed to timber cleats with CP screws washer etc. all complete:. |
| 116 | Providing, fitting and fixing Beveled gauge mirror of superior glass with 6mm A.C. sheets ground and fixed to timber cleats with CP screws, washer etc complete. |
| 117 | Providing, fitting and fixing. of chromium plated soap dish with necessary screw etc all complete. |
| 118 | Providing, fitting and fixing towel rail of chromium plated brass complete with brackets fixed to the timber cleats, CP brass screws complete |
| 119 | Providing and placing on terrace high density polyethylene water storage tank with man hole lid and suitable locking arrangement including making holes for inlet, out let and ball cock including testing etc. all complete: (Sinter or equivalent |
| 120 | 2000 litre capacity |
| 121 | Supply and fixing of Type B SWR PVC soil and waste pipes jointed with rubber ring with good quality lubricant for shafts and for drainage lines with solvent cement. As per IS - 13592-1992 for pipes and IS 14735 for fittings, inclusive of all necessary specials like bends, tees, offsets, junctions pan connector,testing etc laid underground with suitable clamps and specials curing etc complete ( including excavating trenches in all sorts of soil of required width for pipes ,cables etc including excavation for sockets and dressing of sides ramming of bottoms depth upto 2.5m including getting out the excavated soil and then returning the soil as required in layers not exceeding 20cms in depth including consolidation danger lighting , pumping put water removing the slush and sullage etc and disposing the surplus excavated earth within a lead of 50m or as directed) |
| 122 | 300 mm dia. Prince / Supreme or equivalent soil pipe |
| 123 | 200 mm dia. Prince / Supreme or equivalent soil pipe |
| 124 | 160 mm dia. Prince / Supreme or equivalent soil pipe |
| 125 | 100 mm dia. Prince / Supreme or equivalent soil pipe |
| 126 | 75 mm dia. Prince / Supreme or equivalent soil pipe |
| 127 | Providing, fitting and fixing bends of various types plain or a band with access door, insertion rubber washer 3mm thick bolts and nuts complete SCI or centrifugally cost spun sands pipes |
| 128 | 100 mm dia. Supreme / Prince |
| 129 | Providing, fitting and fixing double equal junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. |
| 130 | 100 x 100 x 100 x 100 mm Supreme / Prince |
| 131 | Providing, fitting and Installation of 30 Litre Geyser all complete as per he direction of engineer incharge |
| 132 | SEPTIC TANK, SOAK PIT |
| 133 | Excavation in soil in hilly area by manual means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 50 meters. |
| 134 | Providing and laying hand packed stone soling in building works with clean hard selected stones all complete. |
| 135 | Providing & Laying in position cement concrete of 1:3:6 mix. (1 cement, 3 coarse sand,6 graded stone aggregate of 20mm & down size) including compacting curing etc. all complete. |
| 136 | Providing & Laying in position 1:1.5:3 mix (1cement, 2 coarse sand 4 graded stone aggregate 20mm and down nominal gauge) reinforced cement concrete of nominal mix excluding the cost of form work, finishing & reinforcements of cement) as per the direction of Engineer in Charge. |
| 137 | Providing, fixing and removing form work for casting R.C.C items as indicated below: (with locally available) |
| 138 | Floor slab, roof slab, landing, balcony & access platform. |
| 139 | Wall (Septic tank, Soak Pit, Septic baffle) |
| 140 | Supplying, bending and placing in position of Tor steel reinforcement in all R.C.C works i/c cost of binding wires all complete. |
| 141 | Haulage for stock material via Surfaced Road for the distance of 30 km excluding loading and unloading all complete. |
| 142 | Loading and Unloading of Cement or Steel by Manual Means and Stacking. |
| 143 | Haulage for Fine Aggregate via surfaced road for the distance of 50km excluding loading and unloading all complete. |
| 144 | Haulage for Coarse aggregate, via Surfaced Road for the distance of 50km excluding loading and unloading all complete. |
| 145 | Haulage for throwing away of excavated earth via Surfaced Road for the distance of 20 km excluding loading and unloading all complete. |
| 146 | Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/ Kanker/ Moorum/ excavated earth. |
| 147 | Sinages |
| 148 | Provision for Furniture |
| 149 | Section 'A' Internal Electrification |
| 150 | Wiring for light/fan/call bell & 6A plug points with 2x1.5 sqmm FRLSH PVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 1x1.5sqmm FRLSH PVC insulated copper conductor single core cable as required. |
| 151 | Wiring for 16 A plug point with 2x 2.5 sqmm FRLSH PVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 1x 2.5 sqmm FRLSH PVC insulated copper conductor single core cable as required. |
| 152 | Wiring for light/Fan/Call bell & 6 A plug point with 2x2.5 sqmm FRLSH PVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 1x 2.5 sqmm HR FRLS PVC insulated copper conductor single core cable as required. |
| 153 | Wiring for sub-main for 16 amps (2x1000W) plug points with 2x4.0 sqmm FRLSH PVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 1x4.0 sqmm FRLSH PVC insulated copper conductor single core cable as required. |
| 154 | Wiring for sub-main with2x 6.0 sqmm FRLSH PVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with1x 6.0 sqmm FRLSH PVC insulated copper conductor single core cable as required. |
| 155 | Wiring for main with 2x 10.0 sqmm FRLSH PVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 1x 10.0 sqmm FRLSH PVC insulated copper conductor single core cable as required. |
| 156 | SECTION 'B' :- SWITCH, SOCKET & ACCESSORIES. |
| 157 | Supplying & fixing 06 amps 1 way FT switch on white moduler plate and metal flux box including connection etc. as required. |
| 158 | 1 no. 06 amps FT switch with 1 no white 1 moduler plate and 1 moduler metal flux box. |
| 159 | 2 no. 06 amps FT switch with 1 no white 2 moduler plate and 2 moduler metal flux box. |
| 160 | 3 no. 06 amps FT switch with 1 no white 3 moduler plate and 3 moduler metal flux box. |
| 161 | 4 no. 06 amps FT switch with 1 no white 4 moduler plate and 4 moduler metal flux box. |
| 162 | 6 no. 06 amps FT switch with 1 no white 6 moduler plate and 6 moduler metal flux box. |
| 163 | 8 no. 06 amps FT switch with 1 no white 8 moduler plate and 8 moduler metal flux box. |
| 164 | Supplying & fixing 1 no. 2 way switch with 1 no 1 module white plate & 1 no 1module metal flux box including connection etc. as required. |
| 165 | Supplying & fixing 1 no. 16 amps socket, & 16 amps switch,white plate (4/3 module) & Metal flux box (4/3 module) including connection etc. as required. |
| 166 | Supplying & fixing 1 no. 06 amps socket with 1no. 06 amps switch, 1 no. 3 module white plate & 1 no. 3 module metal flux box including connection etc. as required. |
| 167 | Section \\"C\\":- Light Fitting & Accessories |
| 168 | Supplying & fixing recessed mounted LED panel light fitting 2ft x 2ft 36 watts including connection etc. as required. |
| 169 | Supplying & fixing surface LED fitting 12 watts including connection etc. as required. |
| 170 | Supplying & fixing recessed LED fitting 10 watts including connection etc. as required. |
| 171 | Supplying & fixing LED tube light fitting 22 watts 4 ft including connection etc. as required.. |
| 172 | Supplying & fixing LED wall mounting mirror light including connection etc. as required. |
| 173 | Wall mounting fan 18\\" |
| 174 | Supplying, Installation ,testing & commissioning of storage water heater including connection as required. |
| 175 | 15 ltr capacity |
| 176 | Supplying, Installation, testing & commissioning of ventilating fan 250mm including connection as required. |
| 177 | SECTION - `D' :- Distribution syst & lightning conductor |
| 178 | Providing & earthing with 2 mtr. Long safe earthing with T19 electrode & 1 bag back fill chemical compound |
| 179 | Providing & laying 25mm x 5mm copper strip for looping earth from earth electrode fo main distribution board of the building |
| 180 | Providing & installing Copper tube type 1m long lightning arrestor having prongs at the top of the arrestor and base plate with nuts & bolts |
| 181 | SECTION 'E' : Panels and Distribution boxes . |
| 182 | L.T distribution switch board with copper bus bar, out-door type Kiosk, having electrolytic annealed copper bus bar 50x12mm for phase & 50x6mm for neutral circuits mounted on glazed porcelain or Bakelite base & fitted with voltmeter, ammeter, selector switches for ammeter & voltmeter, electronic KWH meter, indicating lamps cabin light, fabricated with 12 gauge M.S plain sheet, painted with anti- rust primer & two coats of Epoxy paint of shade 631 as per IS: 8623-1, front opening doors with gasket & locking arrangement complete with following incoming & outgoing controls: LTDB 800 A |
| 183 | INCOMING: 1 No. 800 A, 4P,50KA, MDO ACB. |
| 184 | OUTGOING: 4 Nos. 200A TP MCCB , 50 KA, 1 No. 63 A TP MCCB, 35 KA all with built in Thermo Magnetic Release . |
| 185 | Supplying, installation, testing & commissioning of Miniature circuit breaker (CONFORMING TO CPWD /NBC/ Relevant IS & BIS Code) |
| 186 | Single pole 10 Amps |
| 187 | Single pole 16 Amps |
| 188 | Single pole 20 Amps |
| 189 | Double pole 32 Amps |
| 190 | Double pole 63 Amps |
| 191 | Three pole 32 Amps |
| 192 | Supplying & installation of MCB distribution board Double Door/Single door (CONFORMING TO CPWD /NBC/ Relevant IS & BIS Code) |
| 193 | 12 ways SPN(Double door) |
| 194 | 8 ways SPN (Double door) |
| 195 | SECTION 'F' : laying of 1.1 kv grade cables . |
| 196 | Providing & laying 1.1 KV grade XLPE insulated aluminium armoured conductor cable on surface of the wall of building with required size of aluminium shadle and screw etc. as required. |
| 197 | 3.5 Core x 240 sqmm |
| 198 | 2 Core x 10 sqmm |
| 199 | Termination of cable 3.5 core / 4 core armoured Aluminium cable with required aluminium lugs and compression glands for each end complete in all respect including connection. |
| 200 | 3.5 x 240 sqmm |
| 201 | 2 Core x 10 sqmm |
| 202 | SECTION G: INSTALLATION OF 315KVA, 11/0.43 KV OUTDOOR TYPE DISTRIBUTION SUB-STATION . |
| 203 | 11 Mtrs. Steel lattice structure of 65x65x6mm M.S Angle complete with nuts & bolts . |
| 204 | M.S. Channel 75x40mmx6mmx1.28 mtr long for suppoting D.O.F and G.O.S etc. |
| 205 | M.S. Channel ISLC 100x50x6.4 mmx2.5 mtr. Long for supporting line and transformer. |
| 206 | M.S. Channel ISLC 100x50x6.4 mmx0.46 mtr. Long for supporting main channel of transformer. |
| 207 | Back clamp of 50x6mm M.S. flat for holding the M.S. channel |
| 208 | M.S. nuts & bolts 16mm dia x 40mm length. |
| 209 | M.S. nuts & bolts 16mm dia x 350mm length half threaded. |
| 210 | 11 KV, 3 Pole,200 Amps, Air Break G.O S tilting type, three insulators per phase, complete with all fittings. |
| 211 | 11 KV, 3 Pole, 200 Amps, Dropout fuse unit complete with all accessories. |
| 212 | 9 KV rms, 5 KA single pole unit Metal Oxide Gapeless Surge Arrestor for 11 KV, 50 c/s solidly earthed neutral system with clamps. |
| 213 | 11 KV Disc Insulator70 KN T/C Type (Polymer) |
| 214 | Complete hardware fittings for 11 KV T&C type disc insulator for Weasel conductor |
| 215 | No. 12 SWG G.I wire for continuous earth. |
| 216 | ACSR Weasel conductor. |
| 217 | Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate |
| 218 | T-19 type safe earthing electrode (50 mm dia. x 3mtr.) with one bag back fill chemical compound. |
| 219 | L.T distribution switch board with aluminum bus bar, out-door type Kiosk, having electrolytic annealed Aluminum bus bar 50x12mm for phase & 50x6mm for neutral circuits mounted on glazed porcelain or Bakelite base & fitted with voltmeter, ammeter, selector switches for ammeter & voltmeter, electronic KWH meter, indicating lamps cabin light, fabricated with 12 gauge M.S plain sheet, painted with anti- rust primer & two coats of Epoxy paint of shade 631 as per IS: 8623-1, front opening doors with gasket & locking arrangement complete with following incoming & outgoing controls: |
| 220 | INCOMING: 1 No. 400 A, 4P,50KA, MCCB |
| 221 | OUTGOING: 1 No. 200A TP MCCB, 50 KA ,2 Nos. 100A TP MCCB, 35 KA & 1 No. 63A TP MCCB, 35 KA all with built in Thermo Magnetic Release. |
| 222 | 11 KV danger board of size 8\\"x6\\". |
| 223 | 3.5 core, 240 sq.mm. L.T Alumunium PVC armoured cable from transformer to L.T panel. |
| 224 | 3.5 core, 185 sq.mm. L.T Alumunium PVC armoured cable from L.T panel to line. |
| 225 | 50 HZ, DYN 11, 3 PHASE, ONAN COOLED, OUT-DOOR TYPE DISTRIBUTION TRANSFORMER WITH OFF-CIRCUIT TAPPING +2.5%, +5%, ON H.V SIDE WITH BARE BUSHING ON HV & LV SIDE & PROVIDED WITH STANDARD FITTINGS & ACCESSORIES WITH FIRST FILLING OF TRANSFORMER OIL CONFORMING TO IS:1180(PART-I)2014:ENERGY EFFICIENCY LEVEL -2. 200KVA, 11/ 0.433 KV, Copper Wound |
| 226 | Painting of structure with red oxide paint @ 2 ltr/pole. |
| 227 | Painting of structure with Al. paint @ 1.5 ltr/pole. |
| 228 | Barbed wire @ 2 Kg/pole. |
| 229 | L.T 1.1 KV cable end termination kit for.a)3.5 core 185 sq.mm. |
| 230 | b) 3.5 core 240 sq.mm |
| 231 | G.I barbed Wire |
| 232 | Concreting of 11 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix. |
| 233 | Placement of L.T. distribution board on parapet of size 2x0.61x0.35x 0.61 Mtr. in 1:3:6 ccm including 12 mm thick cement plaster in 1:4 mix. |
| 234 | Concreting of H.T Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit. |
| 235 | Placement of 315 KVA Distribution Transformer on parapet of size 1.2x1.2x1mtrs. In 1:3:6 cc Mix including 12 mm thick cement plaster in 1:4 Mix. |
| 236 | Fencing for 315KVA pole mounted distribution substation of size 2x3 mtrs constructed with 50x50x5 mm MS angle vertical props, 35x35x6 mm MS angle supports(double run),M.S wire mesh, 50x6mm M.S flat iron for clamping wire mesh complete with gate with locking arrangement, site development, concreting of props in 1:2:4 cc i/c soiling and floring works in 1:4:8 cc. |
| 237 | SECTION H: Compound lights . |
| 238 | 9 metre long 410-SP-30 swaged type steel tubular pole with CI base plate and cap, double part (Nut bolt type) Working load 172 kgs |
| 239 | LED Street light 150 Watt |
| 240 | Red oxide metal primer (NEROLAC or equivalent) |
| 241 | Aluminium paint (NEROLAC or equivalent) |
| 242 | Concreting of 9 Mtrs. Lattice structure / swaged steel tubular pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs. pit, construction of parapet 0.61x0.61x0.153 mtrs. in 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 mix. |
| 243 | Excavation of 0.45 x 0.90 x 1.00 m cable trench in mix soil & re-filling with available excavated earth and providing cement concrete on the top of the trench. |
| 244 | Providing & earthing with 2 mtr. Long safe earthing with T19 electrode & 1 bag back fill chemical compound |
| 245 | copper wire 6/8 SWG for earthing lopping system |
| 246 | Changeover Switch 200 Amp 415V |
| 247 | Busbar chamber (copper bar type)4 pole 100 amp |
| 248 | Digital time switch Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender