Tender For Special Repair To Roads At Various Locations At Tech And Domestic Area At Af Stn Nal.
Tender Value
58.80 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
3 days left
EMD
1.13 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bikaner → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Roads At Various Locations At Tech And Domestic Area At Af Stn Nal.
BOQ
| Sl. No. | Item Description |
| 1 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sq m and exc 50 mm but not exc 100mm deep. |
| 2 | M&L for 75cm thick (compacted thickness) WBM with coarse aggregate of grading 2 (63 mm to 40 mm) or of grading 3 (50 to 20mm) spread, rolled and consolidated to gradient and camber required with granite trap or basalt stone aggregates, complete all as specified and directed. |
| 3 | M&L for Preparing Unsurfaced WBM by brushing with wire brushes for removing caked mud etc,sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt, and aplying evenly a priming/tack coat with bituminous primer over WBM @ 10 Kg. Per 10 Sq.M using bitumen emulsion (RS-1) conforming to IS-8887 with mechanical sprayer, operated by cold pressure mechanism complete all as specified and as directed by the Engineer-in-Charge. |
| 4 | M&L for Premixed Bituminous macadam from hot mix plant with 4% binder content by weight of total mix using paving bitumen of grade VG-30,laid with Mechanical Paver, rolled and compacted with power road roller of 8 to 12 ton capacity to required gradient and camber (consolidated thickness 75 mm or less) complete all as specified and as directed by the Engineer-in-Charge.Note: Mixing of bituminous concrete shall be in hot mix plant. |
| 5 | M&L for Repairs to pot holes exceeding 30 mm depth,area not exceeding 1.00 Sqm each including sweeping free from dust and mud, or water scoring sunken surfaces in roads, paths etc cutting around edges to at least 25 mm depth, making good by applying tack coat with bitumenous primer using bitumen emulsion @ 5 kg /10 Sqm, putting in premixed bituminous mecadam, well rammed and sealed with binder 9.8 kg per/10 Sqm blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed with power road roller of 8 to 12 ton capacity and consolidated including supply of premixed mecadam, binder and chipping complete all as specified and as directed by the Engineer-in-Charge. |
| 6 | M&L for Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned black top surface with gunny bags to remove all loose dirt and Applying evenly a priming/ tack coat @ 5 Kg. Per 10 Sq.M using bitumen emulsion (RS-1) conforming to IS-8887 with mechanical sprayer, operated by cold pressure mechanism including laying of Bituminous Premixed Semi Dense Asphaltic Concrete, 30 mm consolidated thickness, using paving bitumen of Grade VG - 30, with 5.5% of binder content by weight of total mix using Hot Mix Plant and laid with Mechanical Paver, rolled and compacted with power road roller of 8 to 12 ton capacity to required camber and gradient complete all as specified and as directed by the Engineer-in-Charge. |
| 7 | M&L for cleaning and preparing the bituminous road surface and making good for road marking with reflective thermoplastic white road marking paint confirming to BIS-3262, laid through Road Marking Machine in layer of Reflective thermoplastic paint (using 5kg per sqm by incorporating 8% white glass beads for reflectivity) and 2mm thick centre line, stop line etc. as per IRC pattern laid at temperature 60 degree centigrade including making necessary traffic diversion arrangement complete all as specified and as directed. |
| 8 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. and as directed by Engr-in- Charge |
| 9 | Taking out Aluminium road studs/dealineator any type and any size from bituminous road before road carpeting work complete all as specified and directed by Engineer-in-Charge. |
| 10 | S&F of cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PMMA striplens reflector fixed with and incl MS stud of suitable size as per manufactures instructions |
| 11 | S&F of metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including providing and embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed |
| 12 | S&F of solar cat eye aluminum alloy (100% water proofing design according to IP-65 of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono crystalline solar panel 2.4V/ 0.3 watt one Ni-Cd rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd complete as per manufactures instructions etc. all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender