Tender For Repair/Maint To Swimming Pool, Incinerator, Stp, Laundry, Cleaning Of Ug Sump, Pump Motor, Cooling Tower And Connected Accessories At installation Shivaji Lonavla. (8504/E8)
Tender Value
25 Lakhs
Estimated cost
Bid Submission
09 Nov 2026
22 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint To Swimming Pool, Incinerator, Stp, Laundry, Cleaning Of Ug Sump, Pump Motor, Cooling Tower And Connected Accessories At installation Shivaji Lonavla. (8504/E8)
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Overhauling of incinerator unit at INS Shivaji comprising of the following repairs:-(a) General srevicing of Eco flame burner-02 nos(b) Decarbonize the flame chute using long brushes, special scrubbers and remove the carbon deposits and deposit the carbon deposits away from the incinerator. (c) Replace the unserviceable sequence controller complete with new one -01 No(d) Replace the unserviceable transformer with new one - 01 No(e) Repair the cracked incinerator waste storage belly using fire bricks and cement mortar to the existing shape.(f) Remove and desilt the diesel tank and re-fix the same after removing all dust/foreign particles.(g) Clean the fuel Jet for free flow of fuel complete. |
| 2 | Material and Labour for comprehensive repair / replacement including total servicing/ overhauling of the Mechanical Laundary at INHS Kasturi comprising of the following Parts of Laundary Machine for maintenance complete (including all sprare parts ) all as specified and as directed. -a. Washer Extractor - 30 Kg Capb. Dryer Tumbeler - 30 kg Capc. Flat Iron / Calender Machine - 7 ftd. Air Compressore. Steam Boilerf. Steam Press with Table |
| 3 | M & L for disconnecting carefully and dismantling the pump set from motor unit and opening complete pump set, cleaning replacing of unserviceable parts such as gun metal bushes, rubber packing, MS Nut, Bolts, rubber coupling (spider), Air valve and worn out parts etc and reassembling, re-installing commissioning and testing for satisfactory running complete all as specified and as directed for capacity of pump 100 HP (cooling tower) :-Note :- Spare parts replaced shall be measured and paid separately as \\"Supply only\\" |
| 4 | All as per item no.3 but Centrifugal pump set of 30 HP capacity (ashoka swimming pool). |
| 5 | All as per item no.3 but Centrifugal pump set of 10 HP capacity (old swimming pool) |
| 6 | All as per item no.3 but Non clog Submersible pump set of 20 HP capacity |
| 7 | All as per item no.3 but Non clog Submersible pump set of 15 HP capacity |
| 8 | M & L for overhauling of motor unit, 3 phase, 415 volts by dismantling and opening completely, cleaning internal parts thoroughly, replacing unserviceable minor parts like nut bolts, washers, terminal plate, cable lugs, greasing including insulating materials, varnishing, heating, reassembling reinstalling and testing complete all as specified and as directed for capacity of Motor 100 HP (cooling tower) Note:- Unit rate quoted shall be deemed to include for minor unserviceable parts as mentioned/ required for repairs. All other major spares as specified hereinafter will be measured and paid separately as \\"Supply only\\". |
| 9 | All as per item no.8 but for motor of Centrifugal pump set of 30 HP capacity (ashoka swimming pool). |
| 10 | All as per item no.8 but for motor of Centrifugal pump set of 10 HP capacity (old swimming pool) |
| 11 | All as per item no.8 but for motor of Centrifugal monoblockpump set of 3 HP capacity |
| 12 | All as per item no.8 but for motor of Centrifugal monoblockpump set of 2 HP capacity |
| 13 | All as per item no.8 but for motor of Submersible pump set of 3 HP capacity |
| 14 | All as per item no.8 but for motor of Submersible pump set of 2 HP capacity |
| 15 | All as per item no.8 but for motor of Non clog Submersible pump set of 20 HP capacity |
| 16 | All as per item no.8 but for motor of Non clog Submersible pump set of 15 HP capacity |
| 17 | M & L for rewinding electric motor by dismantling from cable connection pump set and foundation, dismantling complete motor removing all parts thoroughly removing burnt copper wire with new one and rewinding motor 3 phase 415 with same gauge, same No of turns of super enamel copper wire including E class insulating material, varnishing, heating etc re-installing and testing etc complete all as directed by Engr-in-Charge for the capacity Centrifugal pump set of 100 HP capacity.(cooling tower):-Note :- Unit rate quoted shall be deemed to include for minor unserviceable parts as mentioned/ required for repairs. All other major spares as specified hereinafter will be measured and paid separately as \\"Supply only\\". |
| 18 | All as per item no.17 but for motor of Centrifugal pump set of 30 HP capacity (ashoka swimming pool). |
| 19 | All as per item no.17 but for motor of Centrifugal pump set of 10 HP capacity (old swimming pool) |
| 20 | All as per item no.17 but for motor of Centrifugal monoblockpump set of 3 HP capacity |
| 21 | All as per item no.17 but for motor of Centrifugal monoblockpump set of 2 HP capacity |
| 22 | All as per item no.17 but for motor of Submersible pump set of 3 HP capacity |
| 23 | All as per item no.17 but for motor of Submersible pump set of 2 HP capacity |
| 24 | All as per item no.17 but for motor of Non clog Submersible pump set of 20 HP capacity |
| 25 | All as per item no.17 but for motor of Non clog Submersible pump set of 15 HP capacity |
| 26 | Supply and fix of CI Rising Spindle sluice valve Make-Kriloskar valve both ends flanged and drilled. Hand wheel made out of grey CI, complete valve confirming to IS 14846 and its fittings suitable for hydraulic test pressure of 15 Kg/sqcm PN 1.6 ISI marked complete all as specified and directed of sizes 80 mm |
| 27 | All as per item no.26 but of size 100 mm |
| 28 | All as per item no.26 but of size 150 mm |
| 29 | All as per item no.26 but of size 200 mm |
| 30 | Supply and lay on PCC pillars or on any position MS pipe of dia 250 mm, Apply two coats with black paint over one coat of red oxide primer externally on the pipe line complete including testing and commissioning to the satisfaction of Engr-in-Charge. |
| 31 | All as per item no.30 but of size 150 mm |
| 32 | All as per item no.30 but of size 100 mm |
| 33 | All as per item no.30 but of size 80 mm |
| 34 | M&L for 150 mm dia MS Pipe fittings including Flange , rubber gasket packing suitable nuts, bolts, washers all fittings like brackets of any angle, short pices, welding the flanges to MS pipe complete. |
| 35 | S&F in replacement, contactor Type, ML-6, AC3-110A Amps complete all as specified and as directed. |
| 36 | All as per item no.35 but of size ML-3, AC3-40 A Amps |
| 37 | All as per item no.35 but of size MNX 32 AC3-32 A Amps |
| 38 | S & F in replacement star delta timer, operation voltage 230-415 Volt, 50 Hz complete all as specified and as directed. |
| 39 | S & F in replacement Thermal overload relay with in built Single Phasing protection MN 5(directly operated) with relay range of 66-110 A complete all as specified and as directed. |
| 40 | All as per item no.39 but of MN 2(directly operated) with relay range of 24-40 A |
| 41 | S& F in replacement push button (red,green)for motor complete all as specified and as directed. |
| 42 | S&F in replacement 3 Phase Multi function meter VAF+PF meter with RS 485, CI 0.5 With input voltage measurement range 50-520V AC (P-P) complete all as specified and as directed. |
| 43 | S&F in replacement MCCB 4P 125 Amp capacity, 36 KA including disconnecting incoming cable, replacement of worn out lugs, crimping with new lugs complete all as specified and as directed.Make:legrand |
| 44 | All as per item no. 43 but of capacity 200A 3PMake:-Legrand |
| 45 | All as per item no. 43 but of capacity 63A 4PMake:-Legrand |
| 46 | S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. cut to ordinary lengths i.e. within 20mm of the length indicated ( Fe-410-W(Gde-E-250) quality-A. |
| 47 | Taking up Cast iron water main of size any dia including all fittings for spigot and socket ends and lead joints including burning out lead joint and recovering lead complete all as specified as directed. Note :- (i) Excavation earthwork shall be measured and paid seperately |
| 48 | S&F cast Iorn Pipes with Spigot and Socket ends centrifugally cast, Class LA laid in trenches including reducing the length of required size complete all as specified as directed for size of dia 250 mm bore. :- Note :- (i) Excavation earthwork shall be measured and paid seperately. (ii) CI fitting will be measured and paid seperately. |
| 49 | All as per item no.30 but of size 200 mm bore. |
| 50 | All as per item no.30 but of size 150 mm bore. |
| 51 | All as per item no.30 but of size 100 mm bore. |
| 52 | All as per item no.30 but of size 80 mm bore. |
| 53 | Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr deep and getting out in soft loose soil all as specified and directed |
| 54 | Returining, filling in including spreading, levelling watering and well ramming in layer not exce 25 cm, all as specified and directed |
| 55 | Removing excavated soil to a distance not exce 50 mtr and deposited where directed at a level not exceding 1.5 mtr abvoe the starting point all as specified and directed. |
| 56 | Cleaning and removing all scales and dirt, sludges, etc., from RCC UG Sewage sump by sewage suction machine etc., by mechanized dewatering and scrubbing the surface of floor/ wall and cleaning sludge with High pressure cleaning (i.e., using High Pressure Jet Pump of 2 HP putting minimum pressure of 150 Bar to remove all sludges), Vaccum cleaning, Anti bacterial spray and etc., complete in all respect as per reputed specialised sewage water tank 'TANK CLEAN' process. and removing vegetation around the tanks including writing tank clean on (date), (month) and (year), font size should be 60 cms writing with paint , date of cleaning on the tanks, Complete all as specified and directed by Engineer-in-Charge. |
| 57 | M&L for testing of the collection of representative raw sewage water fromm inlet of the sump and treated sewage water sample from the final outlet of the 50 KLD STP in the presence of the Engineer-in-Charge, and transportation of the sample to a Government Laboratory / Government-approved laboratory for complete physical, chemical and bacteriological analysis.The testing shall include, as applicable:pH,Biochemical Oxygen Demand (BOD),Chemical Oxygen Demand (COD),Total Suspended Solids (TSS)Total Dissolved Solids (TDS),Oil & Grease,Ammoniacal Nitrogen,Total Nitrogen,Total Phosphorus,Dissolved Oxygen (DO),Chloride,SulphateFaecal Coliform,Total Coliform,Any other parameter required by the Engineer-in-Charge / competent statutory authority.Sampling, preservation, transportation and analysis shall be carried out as per applicable BIS/IS methods and standard laboratory procedures.The Contractor shall include all costs towards sample collection, sample bottles/containers, preservation, transportation, Government Laboratory testing charges, analysis charges and submission of the original signed/stamped laboratory test report to the Engineer-in-Charge.Testing shall be carried out as directed by the Engineer-in-Charge, and additionally whenever the treated water quality is suspected to be unsatisfactory.The treated effluent shall meet the applicable standards prescribed by CPCB/MPCB and other competent authorities, depending upon whether the treated water is discharged or reused for gardening/flushing/other purposes.If the test results fail to meet the applicable prescribed standards, the Contractor shall carry out necessary rectification/optimization of the STP at his own cost and arrange for repeat testing until satisfactory results are achieved. No additional payment shall be admissible for such corrective measures and re-testing. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysNov 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender