Tender For Special Repair To God And Do Fuse Limits At installation Shivaji Lonavla (8509/E8)
Tender Value
24.89 Lakhs
Estimated cost
Bid Submission
09 Nov 2026
11 days left
EMD
49800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To God And Do Fuse Limits At installation Shivaji Lonavla (8509/E8)
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 27-Oct-2026 | Amendment to Particular Specifications | Other | 09-Nov-2026 |
| 2 | 27-Oct-2026 | Amendment to BOQ | BOQ | 09-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Supply, delivery and erection in replacement of Steel Tubular Swaged Poles, complete with cast iron base plate, finial taper plug, bolts, nuts, screws and all associated fittings, conforming to IS 2713 and of specified type 410 SP-22, 11 metres in overall length. The pole shall be manufactured from high-quality steel, swaged and welded as required, hot-dip galvanised where specified, and erected complete in position, including handling, transportation, alignment, painting fixing of accessories and all labour, tools and plant necessary for satisfactory completion of the work as directed by Engnr in charge. |
| 2 | Excavation in trenches not exc. 1.5m wide and not exc 1.5m in depth and getting out in soft loose soil for laying of cable trenches all as specified and directed. |
| 3 | All as per item No.2 Herein before but in hard dense soil |
| 4 | All as per item 2 above but for each additional 1.5m or part thereof in depth beyond the first 1.5 m |
| 5 | Removal of surplus soil (excavated soil) to distance not exceeding 50m and depositing where directed at a level not exc 1.5m above the starting point and all specified. |
| 6 | Supply, installation, testing and commissioning in replacement Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to using galvanised iron strip 32×6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion |
| 7 | Supply and fix in replacement Lightning arresters expulsion type complete with all fittings, transmission class, discharge capacity 65 kilo ampere suitable for 22000 volts |
| 8 | Supply and fix in replacement Expulsion fuse element single pole upto 15 - 60Amp 22000volts |
| 9 | Supply and fixing in replacement of outdoor porcelain post type insulators suitable for 22 kV, horizontal mounting, wire-type fuse assembly, complete with galvanized steel base fittings, mounting brackets, nuts, bolts, washers and all associated hardware. The insulators shall be suitable for outdoor service conditions and capable of supporting the fuse element and conductors under normal operating conditions. The item shall include mounting on steel channel/cross-arm, making all necessary mechanical connections and completing the installation in all respects as specified and directed. |
| 10 | Supply and fix in replacement Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint |
| 11 | Supplying, fixing, and commissioning in replacement 22 kV (24 kV class) pin-type outdoor porcelain insulators, complete with hot-dip galvanised steel spindle, two galvanised iron washers, and one galvanised iron nut, all conforming to IS:731 and IS:2486. The insulator shall be of high-strength glazed porcelain (brown), suitable for outdoor overhead distribution lines, and shall provide a minimum creepage distance of 560 mm, mechanical cantilever strength not less than 10 kN, and withstand 70 kV dry, 50 kV wet, and 125 kV lightning impulse voltage. including, mounting the insulator securely on existing structures, ensure proper alignment, tightening of hardware, All materials must be new, factory-tested, and accompanied by routine test certificates. 22000 volts grade |
| 12 | Supply and fixing in replacment of 22 kV Porcelain Disc Type Insulators,complete with galvanized steel cap and pin, ball and socket coupling arrangement, locking device, nuts, bolts and all associated hardware required for satisfactory installation and operation. The insulators shall be manufactured from high-grade, vitrified, non-porous porcelain, uniformly glazed, free from cracks, cavities, laminations and other manufacturing defects. The insulators shall possess high dielectric, mechanical and thermal strength and shall be resistant to weather, moisture, pollution and UV radiation. The disc insulators shall have a minimum electromechanical strength of 70 kN, All ferrous metal fittings shall be hot-dip galvanized. The item shall include supply, transportation, handling, testing and complete erection in position as directed by the Engineer-in-Charge |
| 13 | supplying and fixing in replacement Anti-Climbing Device (Spike Type) fabricated from mild steel round bars, square bars and flats, complete with nuts, bolts, washers and welding. The anti-climbing device shall be made in two halves, suitably shaped to fit the cross-section of the pole and securely clamped around the pole. The item shall include all incidental works required for complete installation of the anti-climbing device in position as directed by the Engineer-in-Charge. |
| 14 | Supply, installation, testing and commissioning in replacement of Air Break Gang Operated (ABGO) Triple Pole Rocking type Switch suitable for 22KV, mechanically operated, complete with nine (09) post insulators, galvanized steel mounting frame, operating pipe, operating mechanism and all associated fittings and accessories. The switch shall be suitable for operation from ground level and rated for continuous current up to 400 Amperes. The item shall include dismantling of the existing switch, making all electrical and mechanical connections, adjustments, testing and commissioning, complete in all respects as specified and directed by Engineer in charge |
| 15 | All as per item no 13 but rated for 800 Amperes. |
| 16 | Supply and fix in replacement Danger notice plate (for 22KV supply) of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for 22KV HT, 25x20 cmsize |
| 17 | Supply, fabrication and fixing of Stainless Steel (SS 304) chequered plate covers, 3 mm thick and 6 feet wide, for covering cable ducts/trenches, fabricated to required lengths complete with necessary SS flat/bar stiffeners, lifting handles and supporting arrangements. The covers shall be accurately cut, formed and fixed in position to provide safe and durable access over the duct/trench while minimizing ingress of rainwater, dust and debris. The item shall include all cutting, welding, grinding, finishing, transportation, labour, fittings and accessories required for complete installation, finished complete in all respects as specified and directed. |
| 18 | Supply and laying of Electrical Insulating Rubber Mat of size 1.0 m × 2.0 m and minimum 3 mm thickness, suitable for use in 22 kV indoor/outdoor substation, switchgear and control panel areas. The mat shall be manufactured from high-quality insulating rubber, provided with anti-skid chequered surface and ISI Certified. The insulating mat shall be of minimum Class 3 rating, suitable for working voltage up to 22 kV AC, and shall be resistant to moisture, oil, acid, alkali and atmospheric conditions. The item shall include cutting to required dimensions, jointing wherever necessary and all incidental works complete. |
| 19 | Supply, installation, and commissioning of insulated 95 - 120 sqmm HT jumper cable for making electrical connections between HT overhead conductor/busbar and associated HT equipment/terminals on 4-pole HT structure, comprising suitable aluminium conductor with XLPE insulation of 22kv grade and cross-sectional area, complete with suitable compression-type aluminium/bi-metallic terminals, connectors, clamps, jumper supports, insulation sealing materials and all necessary hardware and accessories. The jumper shall be of adequate length and suitably dressed and supported to maintain prescribed electrical clearances between phases and from the structure, and shall be capable of withstanding normal operating, wind, vibration and short-circuit conditions. The work shall include cutting, routing, termination, crimping, sealing, fixing, tightening and testing of complete jumper connections, including all labour, tools, tackles and accessories, complete in all respects as directed by the Engineer-in-Charge.Note for items above:- All HT jumper cable connections shall be made using suitable heavy-duty aluminium conductor clamps/connectors/Palm lugs, of appropriate size and type, wherein the conductor shall be securely gripped between the upper and lower aluminium clamping members and tightened with suitable bolts, nuts and washers. The clamp/connector shall provide a firm electrical and mechanical connection between the HT jumper cable and the HT busbar, terminal pad or equipment terminal. Suitable bi-metallic connectors/palm lugs shall be provided wherever required for Al-to-Cu connections. The rate shall include all clamps/connectors, palm lugs, bolts, nuts, washers, supports, sealing/insulation accessories, crimping/termination, fixing, testing, labour, tools and all other accessories necessary for complete and reliable HT connections. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 09, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 11 days
Nov 09, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 11 daysNov 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender