Tender For Provn Of Weather Shed & Hard Standing Adjacent To Ge Office (Bldg No 102) At Site P And Parking Shed With Hard Standing Near Nfs Building Af Stn Thane Under Ge Af Thane
Tender Value
14.50 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
6 days left
EMD
29000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thane → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Weather Shed & Hard Standing Adjacent To Ge Office (Bldg No 102) At Site P And Parking Shed With Hard Standing Near Nfs Building Af Stn Thane Under Ge Af Thane
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Cement concrete for post (bases) of trusses over roof with type C2, 1:3:6 (40mm graded stone aggregate) complete all as specified and directed by Engr-in-Charge. |
| 2 | M&L for Formwork to sides of columns, pillars, piers, posts and struts complete all as specified and directed by Engr-in-Charge. |
| 3 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed by Engr-in-Charge. |
| 4 | M&L for Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and seaS&F plates or chequered) channels, square cut or notched (ordinaryand counter sunk)forming holes, without any attachment with Fe-290 (GdeE-165) complete all as specified and directed by Engr-in-Charge. |
| 5 | M&L for Preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge. |
| 6 | S&F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-charge |
| 7 | S&F pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge. |
| 8 | Excavating over areas, n exc 1.5 m deep and getting out in hard and dense soil complete all as specified and directed by Engr-in-Charge. |
| 9 | Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge. |
| 10 | M&L for Hardcore of gauge broken stone or boulders n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engr-in-Charge. |
| 11 | M&L for Cement concrete with type D2 1:4:8 (40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed by Engr-in-Charge. |
| 12 | M&L for Formwork to sides of post flats rough finished surface of concrete complete all as specified and directed by Engr-in-Charge. |
| 13 | M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-Charge. |
| 14 | M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed by Engr-in-Charge. |
| 15 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed by Engr-in-Charge. |
| 16 | Excavating in post holes (or similar holes) in hard/dense soil each n exc 0.5n cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed by Engr-in-Charge. |
| 17 | M&L for Cement concrete in posts / columns to support Steel structure with Type B-1, 1:2:4 (20 mm graded aggregate) complete all as specified and directed by Engr-in-Charge. |
| 18 | M&L Cement concrete in foundations, filling and mass concrete D2- 1:4:8 using 20mm graded agg complete all as specified and directed by Engr-in-Charge. |
| 19 | Removal of excavated soil to a distance n exc 50m depositing where distance at a level n.exc 1.5m heights from starting point complete all as specified and directed by Engr-in-Charge. |
| 20 | M & L for Point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC insulated FR LS copper conductor single core multi strand flexible cable and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and including PVC casing and caping/conduit pipe of 20 mm heavy duty with all fittings (ISI Marked) , controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge & 3mm thick plastic laminated sheet, making good the disturbed surfaces to match with the existing specification complete all as specified and as directed by Engr-in-Charge. |
| 21 | One light point / fan point controlled by one switch complete all as specified and directed by Engr -in-Charge. |
| 22 | Supply & fix switch piano flush type single pole, one way, 6 Amp complete all as specified and directed by Engr -in-Charge. |
| 23 | Supply & fix ceiling rose, 3 terminal, PVC/polycarbonate body complete all as specified and directed by Engr -in-Charge. |
| 24 | Supply & fix LED lights 1x20 watt ,220 V, AC decorative box type with driver , holder including LED tube light connecteing up with three core flexible copper conductor cable of suitable size from ceiling rose including connector block etc.and necessary fixing arrangement at any height and removing old unserviceable item complete all as specified and directed by Engr -in-Charge. |
| 25 | Supply and fix MCB distribution board SPN 4 way 240 volts, double door with IP 42 protection duly painted with epoxy based powder coated painting suitable for mounting MCB DP/SPN as incomer and MCB SP/DP as outgoings complete with 200 Amps rated busbar, neutral bar, earth bar connecting cable links with top and bottom removable gland plate including removing old unserviceable item complete and making good the disturbed surfaces to match with existing complete all as specified and directed by Engr -in-Charge. |
| 26 | Supply & fix MCB SPN 40 Amps 10 KA, \\"C\\" series, 240 volts complete all as specified and directed by Engr-in-Charge. |
| 27 | Supply and fix MCB SP 6 to 32 Amps,10 KA, \\"C\\" series, 240 volts complete all as specified and directed by Engr-in-Charge. |
| 28 | M&L for earthing complet with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground earth pit not less than 2.25m in deep below ground level with top edge of the plote not less than 1.5m deep below normal ground level connected to and incl 4 mm dia galvanised wire as earth lead wire by means of bolts, nuts, checknuts and washers of galvanised iron or steel all as specified in electrical plate No 5 of SSR (1991) part-I incl 15mm bore GI pipe for protection upto 5 mtr length and PCC 1:2:4 type B-1 as in pit excavation and earth work in any type of soil charcoal common salt and 20mm bore galvanised medium grade steel tubing for watering with one end fixed with cast iron fixing and wiremesh and testing on complete all as specified and directed by Engr-in-Charge. |
| 29 | Supply,lay and testing LT cable XLPE insulated,galvanised steel strip armoured,1100 volts grade with stranded aluminium conductor of cross-sectional area 10 sqmm; 2 core laid in trenches/pipes/ducts/walls and connection with necessary cable lugs and glands, nuts, bolts and washers etc and testing including removing old unserviceable item complete all as specified and directed by Engr-in-Charge. |
| 30 | Excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft loose soil complete all as specified and directed by Engr-in-Charge. |
| 31 | Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed by Engr-in-Charge. |
| 32 | Removing excavated soil not exc 50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed by Engr-in-Charge. |
| 33 | Supply and filling in and speading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR Part-I and as directed. Note: Punned thickess i.e 18 cm shall be measured for paymeny purpose complete all as specified and directed by Engr-in-Charge. |
| 34 | Supply and laying unreinforced precast factory made concrete cable cover, class LV, Type -I, flat, size 250mm x 150mm x 40mm complete all as specified and directed by Engr-in-Charge. |
| 35 | Supply and lay GI pipe 32 mm dia light grade in any length with all GI fittings such as socket, elbow, bend, union, Tee etc laid in trenches/duct/culvert/road crossing etc for protection of cables including removing old unserviceable item complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender