Tender For Repair To Joinery, Cupboards And Kitchen Cabinets Of Certain Md Accn, Provn Of Elevated Platform For Bullet Proof Guard Room And Addn Altn To Bldg At Af Stn Kanheri Hills Under Ge Af Thane
Tender Value
30 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
16 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thane → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Joinery, Cupboards And Kitchen Cabinets Of Certain Md Accn, Provn Of Elevated Platform For Bullet Proof Guard Room And Addn Altn To Bldg At Af Stn Kanheri Hills Under Ge Af Thane
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Oct-2026 | UPLOADING OF TENDER DOCUMENT | Other | 04-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling boarding, any description,, fixed in any position with screws complete all as specified and directed by Engr-in-Charge |
| 2 | S&F factory made PVC cupboard shutters of 18mm thick wood grain (Prelam Rigidlam rainbow colour- Single Side) perfect finish to the shutters and jointed together with solvent cement adhesive incl 18mm x1mm PVC edge lipping is done on all side of shutters using PVC solvent cement adhesive etc complete all as diected by Engr-in-Charge and as per manufecturers specification and instruction. complete all as specified and directed by Engr-in-Charge. |
| 3 | S&F factory made PVC cupboard Shelfs of 25mm thick wood grain (Prelam Rigidlam rainbow colour- Single Side) perfect finish to the Shelfs and jointed together with solvent cement adhesive incl 25mm x1mm PVC edge lipping is done on all side of shutters using PVC solvent cement adhesive etc complete all as diected by Engr-in-Charge and as per manufecturers specification and instruction complete all as specified and directed by Engr-in-Charge. |
| 4 | M&L for 18/19 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work as cupboard shutters complete all as specified and directed by Engr-in-Charge. |
| 5 | S&F in Repair heavy duty SS Zink plated Teliscipic runners of length 18 cm to 24 cm for modular kitchen cabinets complete all as specified and directed by Engr-in-Charge. |
| 6 | S&F in repair Stainless steel L Bihari soft close hydraulic action hinge with capacity to take load of 12 to 20 mm thick board complete all as specified and directed by Engr-in-Charge |
| 7 | M&L for 2nd class soft wood Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads, Exc 13 Sq cm & n Exc 25 Sq cm. complete all as specified and directed by Engr-in-Charge |
| 8 | S&F for 75 mm brass handles, cast type , polished type complete all as specified and directed by Engr-in-Charge |
| 9 | S&F 100mm long hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws and fixed complete all as specified and directed by Engr-in-Charge. |
| 10 | S & F Continuous (piano) hinges,Width of flaps (when open) in 30 mm mild steel, bright finish or electro galvanised complete all as specified and directed by Engr-in-Charge. |
| 11 | S&F extruded aluninum alloy handles, fabricated type anodized 100mm long fixed complete all as specified and directed by Engr-in-Charge. |
| 12 | S&F Mild steel butt hinge, 75 mm long, medium weight, cold rolled fixed with steel screws or welded to steel frame where required complete all as specified and directed by Engr-in-Charge |
| 13 | Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size n.exc.1.50 Sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified and directed by Engr-in-Charge. |
| 14 | All as per item above herein before but size exceeding 1.5 Square metre and not exceeding 4 Square metre each complete all as specified and directed by Engr-in-Charge. |
| 15 | Refixing wooden shutters of any description in same opening exc 1.00 Sqm but n.exc 2.00 Sqm each complete all as specified and directed by Engr-in-Charge. |
| 16 | Taking down shutter of any description of exceeding 1 sqm but not exc 2 Sqm complete all as specified and directed by Engr-in-Charge. |
| 17 | S&F IInd class hard wood plain, solid, straight chowkat and frame wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engr-in-Charge. |
| 18 | M&L for cement concrete (1:2:4) type B-I using 20mm graded stone agg. As in bed block of hold fast coping incl. necessary form work complete all as specified and directed by Engr-in-Charge. |
| 19 | S&F for 30 mm thick IInd class HW rail and style plain framed panelled shutter (Two panel) with lock rail and panel of 9mm BWP,commercial ply or 12mm veneered particle beard with commercial veneering on both faces. The size of rail and stile as per IS :1003 (Part-I) kiln and chemically pressure treated complete all as specified and directed by Engr-in-Charge. |
| 20 | S&F for 30 mm thick IInd class hard wood glazed and skelton shutters divided into squares with plain chamfered or reounded miltred and related sash bars number to received glass gauze etc edges of framing plain chamfered or reounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.20(a) supplied and fitted to chawkats. complete all as specified and directed by Engr-in-Charge. |
| 21 | S&F for 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr-in-Charge. |
| 22 | S&F for 150 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engr-in-Charge |
| 23 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge. |
| 24 | M&L for Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge |
| 25 | S&F 300mm Mild steel helical door spring including roller and roller plate complete all as specified complete all as specified and directed by Engr-in-Charge |
| 26 | S&F solid PVC solid door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling and fixing in opening with stainless steel screws of required size complete all as specified and directed by Engr-in-Charge. |
| 27 | S&f factory Made Solid PVC Moulded Door Shutter,with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing. Including 3 Nos of stainless steel 100 mm size hinges, 2 Nos of aluminium 100 mm size handles, 2 Nos of aluminium tower bolt 100 mm size complete all as specified and directed by Engr-in-Charge |
| 28 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortor complete all as specified and directed by Engr-in-Charge |
| 29 | M&L for machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 20mm thick screed bed in CM 1:4 for laying floor finishes complete all as specified and directed by Engr-in-Charge. |
| 30 | Taking down and re-fixing of aluminium anodized windows along with necessary accessories/ fittings. The windows shall be re-fixed after replacement of broken Cuddapah stone, aluminium sections, and after rectification of rollers, wire mesh, window panes, etc. Note: All new items used in the rectification work shall be paid for separately complete all as specified and directed by Engr-in-Charge |
| 31 | Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket tc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, luminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed by Engr-in-Charge |
| 32 | Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM Rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings complete all as specified and directed by Engr-in-Charge |
| 33 | M&L for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved esign/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed by Engr-in-Charge |
| 34 | S&F for providing and fixing zinc alloy roller for sliding window/ aluminium sections with necessary screws etc complete all as specified and directed by Engr-in-Charge |
| 35 | S&F for Zinc alloy (powder coated) casement lock for windows with necessary screws etc complete all as specified and directed by Engr-in-Charge |
| 36 | S&F 4mm thick Sheet glass, ordinary quality and glazing with glazing clip and powder coated aluminium beading in square n exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-Charge |
| 37 | S&F Stainless steel wire cloth 0.36mm nominal dia wire and average width of aperture 1.14mm and fixed with powder coated aluminium beading/wood beading complete all as specified and directed by Engr-in-Charge |
| 38 | S&F in Repair Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed by Engr-in-Charge |
| 39 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads exc 1.5 sqm complete all as specified and directed by Engr-in-Charge |
| 40 | S&F sheet glass ordinary quality 3.00mm thick and glazing with oil putty or aluminium/rubber beading in squares n.exc 0.5 sqm in each pane complete all as specified and directed by Engr-in-Charge |
| 41 | S&F figured glass, pin-headed type 3.00 mm thick and glazing with oil putty or aluminium/rubber beading in squares n.exc 0.5 sqm in each pane complete all as specified and directed by Engr-in-Charge |
| 42 | S&F in repair, 25mm dia drapery curtain rod/ Harrison rails of anodised aluminium alloy complete with MS brackets golden colour rings and sode caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as specified and directed by Engr-in-Charge |
| 43 | Taking down cement plaster or terrazzo from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge |
| 44 | M&L for rendering 5mm thick in CM 1:4 on fair faces of concrete as in ceiling of slab finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge |
| 45 | M&L for rendering 15mm thick in cm 1:6 on fair faces of brick work or concrete surfaces of wall and finishing the surface even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge |
| 46 | M&L for Preparation of newly plastered surfaces of walls & applying two coats of OBD on chalk whiting on plastered surfases complete all as specified and directed by Engr-in-Charge |
| 47 | M&L for Preparation of newly plastered surfaces of ceiling & applying three coats coats of white wash complete all as specified complete all as specified and directed by Engr-in-Charge. |
| 48 | M&L for 3mm thick one coat of wall care putty on wall complete all as specified and directed by Engr-in-Charge |
| 49 | M&L for 3mm thick one coat of wall care putty on ceiling complete all as specified and directed by Engr-in-Charge |
| 50 | Dismantling floor, hearth or wall tiling including cement morter beddind (but not backing removing seviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge |
| 51 | M&L for Vitrified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 for laying floor finishes complete all as specified and directed by Engr-in-Charge. |
| 52 | Material and labour for Glazed ceramic tiles in vertical surface 350x 250x7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour tiles over and including 10mm thick rendering in CM(1:4) complete all as specified and directed by Engr-in-Charge |
| 53 | Material and labour for non-skid coloured ceramic tiles 7 to 8 mm thick (squre or rectangle) area of each tile exceeding 0.06 Sqm but not exce 0.11 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and directed by Engr-in-Charge |
| 54 | M&L for Acid resistant tiles 15mm thick vitreous ceramic, unglazed, set, jointed and pointed in chemical resistant mortar, resin type, in floors incl 15mm thick screed bed in CM 1:6 for laying floor finishes complete all as specified and directed by Engr-in-Charge. |
| 55 | Demolition of Brickwork or stone/boulder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engr-in-Charge. |
| 56 | M&L for Pre-cast cement concrete block masonry Type C1 1:3:6 (20mm graded aggregate) with solid blocks, exc. 10 cm in width and set in CM 1:4 complete all as specified and directed by Engr-in-Charge. |
| 57 | Demolition RCC Slab Racks, flors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work complete all as specified and directed by Engr-in-Charge |
| 58 | M&L for RCC type B1, 1:2:4 (20 mm graded Stone agg) as in RCC Shelve etc complete all as specified and directed by Engr-in-Charge. |
| 59 | Mild steel TMT Mild steel bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed by Engr-in-Charge |
| 60 | M&L black granite work 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr-in-Charge. |
| 61 | Taking down and re-fixing of aluminium anodized Partion along with necessary glass and accessories/ fittings. The partion shall be re-fixed after widening of door in emergency room complete all as specified and directed by Engr-in-Charge. |
| 62 | Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation complete all as specified and directed by Engr-in-Charge |
| 63 | Taking up or down existing steel water tubing, 20mm bore alongwith connections fixed/laid in any situation complete all as specified and directed by Engr-in-Charge. (fitting measured separately). |
| 64 | S&F Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed by Engr-in-Charge |
| 65 | S&F Galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed by Engr-in-Charge |
| 66 | M&L for Washing, rubbing down and stopping of distempered and painted surfaces of wall and applying one coat of distemper oil-emulsion on walls complete all as specified and directed by Engr-in-Charge |
| 67 | M&L for washing,rubbing down and stopping of distempered and painted surfaces of ceiling and applying one coat of distemper oil-emulsion on ceiling complete all as specified and directed by Engr-in-Charge. |
| 68 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge. |
| 69 | S&F Framed mild steel work of grade E-165 (Fe-290) as in framed work such as doors, gates or frame for cooler stand with gusset plates, rails, braces etc, drilled for fixing of sheeting or other covering of door etc, to be prepared for hanging or sliding etc including either hooks and hinges or steel hanging door fittings and hanging and fixing complete all as specified and directed by Engr-in-Charge. |
| 70 | S & F mild steel plain sheets 1.60mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc complete all as specified and directed by Engr-in-Charge. |
| 71 | M&L for Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over primed steel surfaces complete all as specified and directed by Engr-in-Charge. |
| 72 | M&L preparation of old painted steel surface & applying a coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge. |
| 73 | S&F aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing (minimum thickness of powder coating 50 micron) etc complete all as specified and directed by Engr-in-Charge. |
| 74 | S & F Anodiesed aluminium powder coated door shutters aluminimum section weighing 0.55 Kg/m incl necessary joining cleats glazing clips, rubber neoprene packing, handles 2 nos in each doors, hinges, anodiesed aluminium snap beading screw etc complete all as specified and directed by Engr-in-Charge. |
| 75 | S&F 5.5 mm thick sheet glass, ordinary quality in Aluminium door with solar control film 50 micron in squares exc 0.5 sqm each pane complete all as specified and directed by Engr-in-Charge. |
| 76 | S & F anodised aluminium snap grid frame work for false ceiling Size of grid 605 x 605mm incl hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed by Engr-in-Charge. |
| 77 | M&L for 8 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi nium framework with screws complete all as specified and directed by Engr-in-Charge. |
| 78 | Dismentling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engr-in-Charge. |
| 79 | Pre painted galvatume aluminum zink coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge. |
| 80 | S&F in repair 600x450 mm beveled edge looking mirror of selected quality glass and backing with 6mm thick AC building board and fixed to wall with PVC rawl plugs with chromium plated brass screws and cup washers as in repair complete all as specified and directed by Engr-in-Charge |
| 81 | S&F in repair Towel rail, 19mm dia brass chromium plated, 600mm long with fancy type brass chromium plated brackets on both sides and fixed with steel screws and wooden/rawl plugs as in repair complete all as specified and directed by Engr-in-Charge. |
| 82 | S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified and directed by Engr-in-Charge. |
| 83 | S&F in repair stop cock 15 mm cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe etc. complete all as specified and directed by Engr-in-Charge. |
| 84 | S&F in repair Bib tap of CP brass, 15mm bore, fency type screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engr-in-Charge. |
| 85 | S&F in repair Viterous China wash down water closet pan (pedestal pattern), white incl. Seat and cover (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed by Engr-in-Charge. |
| 86 | S&F in repair vitreous china wash hand basin white flat back size 550 X 400 mm excluding taps waste chain and plug and porcelain stopper but including brackets, waste coupling and waste pipe complete all as specified and directed by Engr-in-Charge. |
| 87 | S&F 15mm dia long neck pillar tap chromium plated cast copper alloy with capstan head, fancy type screwed down high pressure with or with out letters Hot or cold with long screwed for iron pipe complete all as specified and directed by Engr-in-Charge |
| 88 | S&F PVC connections 15mm size with PTMT nuts of length 450 mm etc suitable for 15mm bore of pipe complete all as specified and directed by Engr-in-Charge. |
| 89 | S&F in Repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engr-in-Charge |
| 90 | S&F in repair grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed by Engr-in-Charge |
| 91 | S&F in repair grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40 gms) complete all as specified and directed by Engr-in-Charge. |
| 92 | S&F Toughened glass 12mm thick as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes, supports and hinges/ pivots complete all as specified and directed by Engr-in-Charge |
| 93 | S&F Extruded brass handles, 300mm long fabricated type polished fixed to glass doors and similar works complete all as specified and directed by Engr-in-Charge |
| 94 | M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engr-in-Charge |
| 95 | S&F in repair Mortice lock for toughened glass door, vertical type, size 100 mm Bress Body 4 levers complete all as specified and directed by Engr-in-Charge. |
| 96 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed by Engr-in-Charge. |
| 97 | M&L for PCC 1:4:8 (using 40 mmgraded stone agg) type D2 as in foundation and sub base etc complete all as specified and directed by Engr-in-Charge. |
| 98 | M&L Hardcore of guage n.exc 63mm, deposited, spread and leveled in layers n exc 15cm thick, watered and rammed to a true surface in broken bricks complete all as specified and directed by Engr-in-Charge. |
| 99 | M&L for 100mm thick PCC 1:2:4 type B-2 using 40mm graded stone aggregate as in finishing surfaces of concrete, finish even and fair (without using extra cement) complete all as specified and directed by Engr-in-Charge |
| 100 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engr-in-Charge. |
| 101 | Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick in soft / loose soil complete all as specified and directed by Engr-in-Charge. |
| 102 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point where complete all as specified and directed by Engr-in-Charge. |
| 103 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed by Engr-in-Charge. |
| 104 | M&L for Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates,rivetting, etc., n exc 10 kg each brackets, conforming to FE 410-0 or FE 310-0 (Brackets over 10 kg each to be measured under `Structural Steel') complete all as specified and directed by Engr-in-Charge. |
| 105 | Supply,install, testing and commisioning of split type air conditioner 2 TR capacity of with maximum star rating with standard accessories alonwith cordless remote control, single phase, 240 volts complete with all accessories such as indoor and outdoor units and refrigerant tubing of adequate length as required at site, indoor mounting plate, drain pipe of suitable size brought to ground level from any height including making cable connection by providing three core 4 sqmm copper conductor cable PVC insulated, sheathed of adequate length as required at site and initial filling of refrigerant gas including making round hole on existing any type of wall (core cutting if required) for taking up refrigerant tubing, drain pipe and cables etc and making good the disturbed surface by matching with existing adjoining surfaces all as specified and directed complete all as specified and directed by Engr-in-Charge. Make:- Daikin / Blue Star / Voltas complete all as specified and directed by Engr-in-Charge. |
| 106 | Material and labour for sub main wiring complete with 2 run of 4 sqmm, single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded duly colour coded cable drawn through and including PVC casing and caping of size 25mm width or above as required at site and accessories such as tee, corners,overlaping connector etc of suitable size fixed on surface of walls/roofs/ceiling and including 01 run of 4 sqmm single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded of green colour as earth continuity conductor connected to common earth dolly complete all as specified and directed by Engr-in-Charge |
| 107 | Material and labour for sub main wiring complete with 2 run of 6 sqmm, single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded duly colour coded cable drawn through and including PVC casing and caping of size 25mm width or above as required at site and accessories such as tee, corners,overlaping connector etc of suitable size fixed on surface of walls/roofs/ceiling and including 01 run of 6 sqmm single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded of green colour as earth continuity conductor connected to common earth dolly and making good the disturbed surfaces to match with existing all as specified and directed.Note : - 02 run of 6 sqmm single core copper conductor cable and 01 run of 6 sqmm single core copper conductor and 01 run of PVC casing and caping shall be measured as specified and directed by Engr-in-Charge |
| 108 | Supply and fix sheet metal enclosures with two pin and earth plug and socket complete with single pole MCB 20 Amps complete all as specified and directed by Engr-in-Charge. |
| 109 | Supply and fix Voltage stabilizer for automatic operation,single phase naturally air cooled indoor type & designed for input variation between 170 volts to 250 volts with out voltage stabilized at 20 volts with accuracy of± 2.5% and of capacity 4 KVA complete all as specified and as directed by Engr-in-charge |
| 110 | Material and labour for Point wiring with 1.5 sqmm copper conductor single core core , cable (multistrand) PVC insulated FRLS(unsheathed) concealed drawing in existing PVC conduit/casing caping 25 mm dia, having wall thickness not less than 2 mm for one light pont, controlled by one , one way switch , including 1.5 sqmm PVC insulated FRLS (unsheathed ) copper conductor continuous earth wire complete all as specified and directed by Engr-in-Charge. |
| 111 | All as per item No 6 above, but for One fan point controlled by one switch complete all as specified and directed by Engr-in-Charge. |
| 112 | All as per item No 6 above, but for One 3 pin 6 amps socket out let point controlled by one 6 amps switch on independent board complete all as specified and directed by Engr-in-Charge. |
| 113 | All as per item No 6 above, but for One 3 pin 6 amps socket point controlled by one 6 amps switch on same board complete all as specified and directed by Engr-in-Charge. |
| 114 | All as per item No.6 above, but with 2.5 sqmm for One 3 pin 16 amps socket outlet point controlled by one 16 amps switch on on Ind board. complete all as specified and directed by Engr-in-Charge. |
| 115 | Supplying and fixing following modular 6 A switch complete all as specified and directed by Engr-in-Charge. |
| 116 | Supplying and fixing following modular 16 A switch complete all as specified and directed by Engr-in-Charge. |
| 117 | Supplying and fixing following modular 6 A socket complete all as specified and directed by Engr-in-Charge. |
| 118 | Supplying and fixing following modular 16 A socket complete all as specified and directed by Engr-in-Charge. |
| 119 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc complete all as specified and directed by Engr-in-Charge. |
| 120 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc complete all as specified and directed by Engr-in-Charge. |
| 121 | Supplying and fixing 3 module, GI box along with modular base & cover plate for modular switches in recess etc complete all as specified and directed by Engr-in-Charge. |
| 122 | Supplying and fixing 4 module, GI box along with modular base & cover plate for modular switches in recess etc complete all as specified and directed by Engr-in-Charge. |
| 123 | Supplying and fixing 8 or 6 module, GI box along with modular base & cover plate for modular switches in recess etc complete all as specified and directed by Engr-in-Charge. |
| 124 | Supply & fix recess mounting high lumen LED flat panel 2'X2' 36Watt, slim fit,white powder coated CRCA housing with highpower LEDs , aluminium front frame with flat white high transmission acrylic cover, internally prewired, 230V,complete with all accessories such as electronic driver,LED strip,connector block etc.and necessary fixing arrangement at any height and item complete all as specified and directed by Engr-in-Charge. |
| 125 | Supply and fix distribution board SPN 12 way 240 volts, double door with IP 42 protection duly painted with epoxy based powder coated painting suitable for mounting MCB DP/SPN as incomer and MCB SP/DP as outgoings complete with 200 Amps rated busbar, neutral bar, earth bar connecting cable links with top and bottom removable gland plate and item complete and making good the disturbed surfaces to match with existing complete all as specified and directed by Engr-in-Charge. |
| 126 | Supply and fix MCB SP 6 to 32 Amps,10 KA, \\"C\\" series, 240 volts complete all as specified and directed by Engr-in-Charge. |
| 127 | Supply & fix MCB SPN 32 Amps 10 KA, \\"C\\" series, 240 volts complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 04, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 16 daysNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender