Tender For Interior Renovation Of Hotel Holiday Home Shimla (H.P)
Tender Value
1.53 Crore
Estimated cost
Bid Submission
03 Nov 2026
12 days left
EMD
3.06 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Interior Renovation Of Hotel Holiday Home Shimla (H.P)
BOQ
| Sl. No. | Item Description |
| 1 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 2 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level Cement mortar 1:4 (1 cement :4 coarse sand) as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 3 | Providing Second class teak wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required& length including hold fast lugs or dash fastener as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 4 | Providing and fixing ISI marked flush door shutters Kitply, Samrat, GEE door, Century or equivalent of approved make conforming to IS:2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of Kitply, Grteen, Action Tesa or equivalent of approved make : 40 mm thick including ISI marked Stainless Steel butt hinges with necessary screws as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 5 | Providing and fixing Second class teak wood wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 40 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 6 | Providing and fixing 12 mm thick frameless toughened glass for door shutter, partition of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in- charge including carriage of materials within all leads, lifts and heights. (Modi Guard/Saint Gobain/Aashai or equivalent of approved make.) |
| 7 | Providing Sal wood work in frames of false ceiling, partitions etc. sawn and fixed in position as per direction of Engineer-in- charge including carriage of materials within all leads, lifts and heights. |
| 8 | Providing and fixing Pre-laminated medium density fiber board IS: 14587:1998 marked Green Panel, Century, Action Tesa or equivalent of approved make with one side decorative lamination other side balancing lamination Grade-I(exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately). Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade- I MDF Board 18 mm thick confirming to IS:14587 as per direction of Engineer-in- charge including carriage of materials within all leads, lifts and heights. |
| 9 | Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), Kitply, Smart, Century or equivalent of approved make having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. |
| 10 | Providing and fixing in wall WPC, lovers wall lining (Sharper Image Floors, Royale Touche Laminates) Century ply, Treeplast, E3 clads or equivalent make As approved by the Engineer in charge with grooved for lining or cladding, with necessary fixing arrangement and screws etc. complete as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Basic Price - 2200.00 Per Sqmtr.) |
| 11 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality 1.0 mm thick as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Kitply, Green, Merino or equivalent of approved make) |
| 12 | Providing and fixing 2nd class teak wood wooden molded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete 50x12 mm as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. |
| 13 | Providing and fixing 40x12mm 2nd class teak wood wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. |
| 14 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing : Rectangular shape 1500x450 mm as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Modi Guard/Saint Gobain/Aashai or equivalent of approved make.) |
| 15 | Providing and fixing brass curtain rods (Heavy Duty) of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 25 mm diameter as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Decor Mart, IKEA/DECO WINDOW or equivalent of approved make) |
| 16 | Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS : 14842, including top cover of 6 mm coir veneer board, nickel plated M.S. Pipe 20 mm dia. (heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x40 mmx40 mmon both inner side of pelmet and rawl plugs 75 mm long etc. all complete as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Kitply/Green, Merino or equivalent of approved make) |
| 17 | Providing and fixing 125 mm bright /matt finished Stainless Steel handles (Heavy Duty) of approved quality & make with necessary screws etc all complete as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. |
| 18 | Providing and fixing 250x10mm bright finished SS tower bolts (barrel type) (Heavy Duty) of approved make with necessary screws etc. complete as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. |
| 19 | Providing and fixing 200x10mm bright finished SS tower bolts (barrel type) (Heavy Duty) of approved make with necessary screws etc. complete as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. |
| 20 | Providing and fixing 250x16mm ISI marked SS sliding door bolts (Heavy Duty) of approved make with nuts and screws etc. complete as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. |
| 21 | Providing and fixing Card Smart RFID 125Khz Door Lock Em4100 Access of approved quality with necessary screws etc as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Basic Price not less than Rs. 7600.00) |
| 22 | Providing and fixing 150 mm bright finished floor SS door stopper (Heavy Duty) of approved make with rubber cushion, necessary brass screws etc. to suit shutter thickness complete as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. |
| 23 | Providing and fixing 50 mm bright finished brass (Heavy Duty) cup board or wardrobe knob of approved quality with necessary screws as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. |
| 24 | Providing and fixing 50 mm special quality bright finished brass cupboard (Heavy Duty) or ward robe locks with four levers of approved quality including necessary screws etc. complete as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. |
| 25 | Providing and fixing 75 mm bright /matt finished Stainless Steel handles (Heavy Duty) of approved quality & make with necessary screws etc all complete as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. |
| 26 | Providing and fixing magnetic catcher (Heavy Duty) of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc complete Triple strip vertical type as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. |
| 27 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. including moulding when ever is required as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Basic rate not less than Rs.225/ per Square Feet.) |
| 28 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Enginee in charge including moulding when ever is required-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent including carriage of materials within all leads, lifts and heights.(Basic rate not less than Rs.225/ per Square Feet.) |
| 29 | Providing and fixing of class 33/AC-5 Pre-laminated wooden floor HDF 12mm thick Density min 850 kg/m3 of class décor laminate min of 0.4 mm of overlay of melamine based paper with abrasion resistance cycle _>6000, impact Resistance IC in IC3 for 33th class, Scratch Residence EN438>3.5: satin resistance Class -5 thickness swelling _< 18% height difference max _>0.15mm with edge tolerance to 0.5-1.0 mm /mtr with underlay armor as desired 0.8-1.0 mm thick, surface soundness >1.25 N/mm as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Shade & make shall be approved before installation from the authority) (Krono (original), Action TESA/Armstrong/Euro or equivalent of approved make) |
| 30 | Providing and laying double charge vitrified floor tiles Kajaria/Nitco/RAK or equivalent of approved make in Size of Tile 1200x600mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on tile adhesive of approved manufacturer ( Sikka,Ultratech) as per the specifications of the adhesive manufacturer, grouting the joint with matching pigments etc. complete in all respect as per detail Architectural Drawing and as directed by Architect as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Basic Price not less than Rs. 80 per Sqft.) |
| 31 | Providing and laying double charge Vitrified tiles Kajaria/Nitco/RAK or equivalent of approved make in Size of Tile 1200x600 mm (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over tile adhesive of approved manufacturer ( Sikka,Ultratech) as per the specifications of the adhesive manufacturer, grouting the joint with matching pigments etc. complete in all respect as per detail Architectural Drawing and as directed by Architect as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights.(Basic Price not less than Rs. 80 per Sqft.) |
| 32 | Providing, fixing & applying POP false ceiling Sakarni, Aadhar Shree, J.B.Hisar or equivalent make consisting of frame G.I. channel main, cross and L & hanging member of heavy quality size & shape with wire gauge mesh (Chetak make or equivalent make). Apply P.O.P. to the expended metal of thickness 10mm thick finish smooth to line & level and design including carriage of material with all lead & lifts. complete to the entire satisfaction of Architect. and as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. Curved surfaces |
| 33 | Extra for sunk or raised mouldings in the plaster of Paris (Gypsum anhydrous) ceiling as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. |
| 34 | Providing and fixing 18 mm thick in ceiling WPC, (Sharper Image Floors, Royale Touche Laminates) with grooved for ceiling , with necessary fixing arrangement and screws etc. complete as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Century Ply/Treeplast, E3 Clads or equivalent make)(Basic Price not less than Rs. 2200.00 per Sqm) |
| 35 | Providing and fixing 20mm thick 1st class Indian teak wood wooden plank ceiling with tongued and grooved jointing and wood screws (frame work and cover fillets to be measured and paid for separately) as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. |
| 36 | Providing and fixing in ceiling Bison Board Confirming IS 14276:2016- 8mm, thick Gray Cement Fiber, Water Resistant, Termite Resistant, Fire Resistant, Matte Laminated For Partition And False Ceiling Use necessary fixing arrangement and screws etc. complete as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Basic Price not less than 600.00 per Sqm) |
| 37 | Providing and fixing thermal insulation with Resin bonded rock wool conforming to IS: 8183, density 48 kg/m3, 50 mm thick, wrapped in 200 G virgin Polythene bags of Rockloyad, Minrock or equivalent of approved make placed over existing false ceiling and held in position by criss-crossing Gl wire as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. |
| 38 | Providing and fixing 12 MM Acrylic finish Corian sheet in two or more colours on base of 12 MM BWR ply over a frame of Mirandi wood 50x50 MM thick fixed to wall with proper screws and fixing material as per design/detail drawings in curve shape (Design work on wall ) and instruction of Architect as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights.(Basic Price not less than Rs. 800.00 per Sqm) Dupont Corian/ LG HIMACS/Christone solid sureface or equivalent of approved make) |
| 39 | 15 mm cement plaster in single coat on fair side of brick / stone walls in 1: 6 (1 cement : 6 coarse sand). Including internal rounded angles chamfers not exceeding in 80 mm girth including curing complete as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. |
| 40 | 20 mm cement plaster in single coat on rough side of brick / stone walls in 1: 6 (1 cement : 6 coarse sand). Including internal rounded angles chamfers not exceeding in 80 mm girth including curing complete as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. |
| 41 | 6 mm cement plaster in ceiling of mix : 1:3 (1 cement : 3 fine sand) as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. |
| 42 | Applying priming coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. |
| 43 | Providing and applying Birla white cement based putty of average thickness 1 mm, over the plastered wall surface to prepare the surface even and smooth complete as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. |
| 44 | Finishing walls with Premium Acrylic Smooth exterior paint (asian paints) with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. |
| 45 | Providing & painting the walls, ceiling with Royal touch paint two or more coats over the prepared surface of Birla Putty to give the smooth appearance with final coat done with rollers complete up to the satisfaction of the Architect as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. |
| 46 | Finishing walls with textured paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. |
| 47 | Melamine polishing on wood work (one or more coat) of approved shade and finish as per the direction of Engineer-In-Charge including surface cleaning of all dirt and dust ,sand papered smooth including a coat of wood filler including carriage of materials within all leads, lifts and heights. |
| 48 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Fosroc, Cico, Pidilite or equivalent of approved make) |
| 49 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineering-charge .The elevation area of the scaffolding shall be measured for payment purpose The payment will be made once irrespective of duration of scaffolding. Note:- This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. |
| 50 | Demolishing cement concrete manually/ by mechanical means including disposal of material lead Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) All the rubbish / mablba / similar, servisble, stacking of useful materials in specified manners and disposal of unservicebale materials as per direction of the Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 51 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable materials in all leads and lifts In cement mortar All the rubbish / mablba / similar, servisble, stacking of useful materials in specified manners and disposal of unservicebale materials as per direction of the Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 52 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, hold fasts etc. complete and stacking of useful materials in specified manners and disposal of unservicebale materials as per direction of the Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 53 | Dismantling tile work in floor sand roofs laid in cement mortar including stacking material lead For thickness of tiles 10 mm to 25 mm All the rubbish / mablba / similar, servisble, un servisble, dismantled and waste material is property of HPTDC as per direction of the Engineer-in-Charge. |
| 54 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including Thickness above 10 mm up to 25 mm complete and stacking of useful materials in specified manners and disposal of unservicebale materials as per direction of the Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 55 | Dismantling cement asbestos or other hard board/ pop ceiling or partition walls complete and stacking of useful materials in specified manners and disposal of unservicebale materials as per direction of the Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 56 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking complete and stacking of useful materials in specified manners and disposal of unservicebale materials as per direction of the Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 57 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means complete and stacking of useful materials in specified manners and disposal of unservicebale materials as per direction of the Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 58 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including complete and stacking of useful materials in specified manners and disposal of unservicebale materials as per direction of the Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 59 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) complete and stacking of useful materials in specified manners and disposal of unservicebale materials as per direction of the Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 60 | Disposal of building rubbish / mablba / similar un servisble, dismantled and waste material (up to 25 km) by manual and mechanical mean including loading, transporting, unloading to approved MC dumping ground or as approved by Engineer in charge including manual inital lead including all leads and lifts involved as per direction of the Engineer-in-Charge |
| 61 | Providing and fixing factory made uPVC white colour sliding glazed window up to 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality. 6mm thick toughened glass/wire mess as per the specification attached and as per approved drawing & direction of Engineer-in-Charge. Three track three panels sliding window made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window all sizes). Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Fenesta / Aluplast/ Prominence or equivalent as approved by authority. |
| 62 | Providing and fixing Polyethylene-Aluminium- Polyethylene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. 1216 (16 mm OD) pipe (Supreme/Finolex/Astral or equivalent of approved make.) |
| 63 | Providing and fixing Polyethylene-Aluminium- Polyethylene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. 2025 (25 mm OD) pipe (Supreme/Finolex/Astral or equivalent of approved make.) |
| 64 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. 20 mm nominal outer dia Pipes (Supreme/Finolex/Astral or equivalent of approved make.) |
| 65 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. 32 mm nominal outer dia Pipes (Supreme/Finolex/Astral or equivalent of approved make ) |
| 66 | Providing and fixing Polyethylene-Aluminium-Polyethylene PE-AL-PE Composite tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Supreme/Sintex/Vectus or equivalent of approved make.) |
| 67 | Providing and fixing high pressure PVC finolex/supreme 6kg pressure heavy duty make spigot and socket waste and ventilating pipe ISI marked including fixing with approved adhesive etc complete including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. 110 millimeters nominal size. (Supreme/Finolex/Astral or equivalent of approved make.) |
| 68 | Providing and fixing high pressure PVC 6kg pressure heavy duty make spigot and socket waste and ventilating pipe ISI marked including fixing with approved adhesive etc complete including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. 150 millimeters nominal size. (Supreme/Finolex/Astral or equivalent of approved make.) |
| 69 | Providing and fixing PVC holder bat clamps of approved design PVC pipes embedded in and including cement concrete blocks 10*10*10cm (ten into ten into ten centimeter) of 1:2:4 (one cement into two sand into four graded stone aggregate 20mm (twenty millimeter) nominal size) and cost of cutting holes and making good the wall etc. as per HP.PWD / CPWD specification as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (a) 110 (One hundred ten) millimeters nominal size. (Supreme/ Finolex/ Astral or equivalent of approved make.) |
| 70 | Providing and fixing PVC holder bat clamps of approved design PVC pipes embedded in and including cement concrete blocks 10*10*10cm (ten into ten into ten centimeter) of 1:2:4 (one cement into two sand into four graded stone aggregate 20mm (twenty millimeter) nominal size) and cost of cutting holes and making good the wall etc. as per HP.PWD / CPWD specification as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (b) 150 mm (One hundred fifty millimeter nominal size. (Supreme/Finolex/Astral or equivalent of approeved make.) |
| 71 | Providing and fixing PVC ISI marked floor traps of self-cleaning design including fixing with approved adhesive complete including cost of cutting and making good the walls and the floors: as per HP.PWD specification as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (a) 110x 90 mm(one hundred ten into ninety millimeter (Supreme/Finolex/Astral or equivalent of approved make.) |
| 72 | Providing and fixing PVC single equal branch with oval access door , ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. 110 (One hundred ten) millimeters nominal size. (Supreme/Finolex/Astral or equivalent of approved make.) |
| 73 | Providing and fixing PVC single equal branch with oval access door , ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (b) 150 mm(seventy five millimeter nominal size. (Supreme/Finolex/Astral or equivalent approved make.) |
| 74 | Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (a) 110 mm dia (Supreme/Finolex/Astral orapproved make) |
| 75 | Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (b) 150 mm dia (Supreme/Finolex/Astral or approved make ) |
| 76 | Providing and fixing PVC door tee ISI marked including fixing with approved adhesive etc. complete as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (a) 110 mm dia (Supreme/Finolex/Astral or equivalent approved make.) |
| 77 | Providing and fixing PVC door tee ISI marked including fixing with approved adhesive etc. complete as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (b) 150 mm dia (Supreme/Finolex/Astral or approved make) |
| 78 | Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (a) 110 mm dia (Supreme/Finolex/Astral or equivalent approved make) |
| 79 | Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (b) 150 mm dia (Supreme/Finolex/Astral or approved make) |
| 80 | Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (a) 110 mm dia (Supreme/Finolex/Astral or equivalent approved make) |
| 81 | Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (b) 150 mm dia (Supreme/Finolex/Astral or equivalent approved make) |
| 82 | Providing and fixing PVC. 110mm size 'P' or 'S' Snow Cat. No. S9030101 White trap for water closet (squatting pan) including jointing the trap with the pan and and PVC pipe with approved adhesive etc. complete as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. 110 mm dia. (Supreme/Finolex/Astral or equivalent approved make) |
| 83 | Providing and fixing PVC cowl as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (a) 110 mm dia (Supreme/Finolex/Astral or equivalent approved make) |
| 84 | Providing and fixing PVC cowl as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (b) 150 mm dia (Supreme/Finolex/Astral or equivalent approved make). |
| 85 | Providing and fixing vitreous wash water closet ( European Type - WC pan) Jaquar ARC ACS-WHT-87953BIUFSM Rimless Blind Installation Wall Hung WC with UF Soft Close Slim Seat Cover, Hinges, Accessories Set, Size: 380x520x375 mm. complete in all respect, with integral 'p' trap including jointing the trap with soil pipe in cement mortar 1:1 ( one cement, one sand) (with cistern, seat cover and flush fitting) Star White including carriage of materials up to all leads and lifts and as per direction of Engineer in charge.( snow white) as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Jaquar/Cera/Kerovit/Hindware or equivalent make) |
| 86 | Providing and fixing wash basin with built in counter Jaquar KUBIX KUS-WHT-35935 Table Top Basin, Size: 565x425x140 mm or equivalent series of Jaquar/Cera/Kerovit/Hindware or equivalent series of approved make as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. |
| 87 | Providing and fixing Jaquar FLORENTINE PRIME FLP-5219PM Wall Mixer provision for Overhead Shower arrangement as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Jaquar/Cera/Kerovit/Hindware or equivalent series of approved make) |
| 88 | Providing and fixing Jaquar OHS-1755 Overhead Shower 180mm Round Shape Single Flow with Air Effect (ABS Body & Face Plate Chrome Plated) with Rubit Cleaning System as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Jaquar/Cera/Kerovit/Hindware or equivalent series of approved make) |
| 89 | Providing and fixing Jaquar SPOUT OPERATING TAPS SPJ-85429 Bathtub Spout with Wall Flange & Face Plate Chrome Plated) with Rubit Cleaning System as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Jaquar/Cera/Kerovit/Hindware or equivalent equivalent series of approved make) |
| 90 | Providing and fixing Jaquar Nuovo 1950 x 1400 x 750 (2 Seater) JSP-WHT-SPANUOVO2S Nuovo Spa with Headrest, Shell Color- Stunning White, Stairs panel, and High Density Lockable Spa Cover JETS : 3.5” single rotating jets 2” direct jets 1” direct jets Air jets 1” circulation jets as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Jaquar/Cera/Kerovit/Hindware or equivalent series of approved make) |
| 91 | Providing and fixing steel sink of Cera REMY Handmade single bowl sink 304 grade stainless steel Size: 510 x 430 mm (20\\" x 17\\") Bowl Size: 460 x 380 mm (18\\" x 15\\") Depth: 230 mm (9”) Installation: Under mount Cat. No. B4711504 Satin finish Installation: Over-mount equivalent Nirali/ Diamond make of approved design size: as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Jaquar/Cera/Kerovit/Hindware or equivalent series of approved make. |
| 92 | Providing and fixing Jaquar QUEEN’S QQP-7307PM Sink Mixer with Short Swinging Spout (Wall Mounted Model) with Connecting Legs & Wall Flanges PRIME or equivalent series of Jaquar/ make with 450mm braided connection pipe as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Jaquar/Cera/Kerovit/Hindware or equivalent series of approved make. |
| 93 | Providing and fixing Jaquar SNR-51011N Sensor Faucet for Wash Basin Tap (Battery Operated) for table top wash basins with tap hole make with aerator as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Jaquar/Cera/Kerovit/Hindware or equivalent series of approved make. |
| 94 | Providing and fixing Jaquar ORP-10037PM Bib Cock with Wall Flange with wall flange and aerator as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Jaquar/Cera/Kerovit/Hindware or equivalent make) |
| 95 | Providing and fixing C.P. brass chain and rubber plug (Heavy Duty) complete for sink or wash basin as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. 32 mm dia |
| 96 | Providing and fixing bottle trap Jaquar ALD-769L300x190 Bottle Trap 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange or equivalent or equivalent series of Cera /Jaquar as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Jaquar/Cera/Kerovit/Hindware or equivalent series of approved make) |
| 97 | Providing and fixing CP brass waste coupling Jaquar ALD-729 Click Clack Waste 32mm Size Half Thread With 80 mm Height for wash basin or sink Cera make or equivalent series of Cera /Jaquar 32 mm dia with half thread 32mm as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Jaquar/Cera/Kerovit/Hindware orequivalent series of approved make). |
| 98 | Providing and fixing P.V.C. waste pipe CERA Outlet connection pipe for single bowl sink without overflow B4811503 of approved make for wash basin and sink as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Jaquar/Cera/Kerovit/Hindware or equivalent series of approved make). |
| 99 | Providing & Fixing in position Jaquar ALD-573 Hand Shower (Health Faucet) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook Also available or equivalent make as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Jaquar/Cera/Kerovit/Hindware or equivalent series of approved make). |
| 100 | Providing and fixing C.P.Brass Jaquar ACN-1181S Towel Rack 600mm Long with Lower Hangers, Stainless Steel or equivalent series of Cera /Jaquar complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass (600mmx20mm) as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Jaquar/Cera/Kerovit/Hindware or equivalent series of approved make). |
| 101 | Providing and fixing C.P.Brass Jaquar CPA-1121RD Towel Ring Round with Round Flange or equivalent series of Cera /Jaquar complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass (600mm x20mm) as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Jaquar/Cera/Kerovit/Hindware or equivalent make) |
| 102 | Providing and fixing CP brass liquid soap dispenser Jaquar ACN 1135N Soap Dispenser with Glass Bottle r make or or equivalent series of Cera /Jaquar with CP brass brackets fixed to wooden cleats with CP brass screws as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Jaquar/Cera/Kerovit/Hindware or equivalent series of approved make) |
| 103 | Providing and fixing CERA LED MIRROR WITH TOUCH SWITCH 600 x 800 mm 5 mm thick glass mirror with Decorative high bright LED strip, Touch switch for LED light, double coat for protection and longevity and on silver plating the back for better reflection Cat. No. B3530105 of superior glass mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washer as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Jaquar/Cera/Kerovit/Hindware or equivalent series of approved make) |
| 104 | Providing and fixing Corner Glass shelves Jaquar ACN-1173 Corner Glass Shelf (with Bracket) Cera /Jaquar as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Jaquar/Cera/Kerovit/Hindware or equivalent series of approved make) |
| 105 | Providing and fixing CP brass soap dish make Jaquar AQN-7733 Soap Dish (Polycarbonate) equivalent series of Cera /Jaquar with CP brass brackets fixed to wooden cleats with CP brass screws as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Jaquar/Cera/Kerovit/Hindware or equivalent make). |
| 106 | Providing and fixing C.P. Paper Holder Jaquar CPA-1151 Toilet Roll Holder or equivalent series of Jaquar/ Cera make as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Jaquar/Cera/Kerovit/Hindware or equivalent series of approved make) |
| 107 | Providing and fixing Jaquar JCS-WHT-2400WS Single Piece Slim Concealed Cistern with Wall Mounting Frame, Installation Kit and “S-Type” Drain Pipe Connection Set for Wall Hung WC (without Flush Control Plate) Also Available or equivalent series of Jaquar/ Cera make as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Jaquar/Cera/Kerovit/Hindware or equivalent series of approved make) |
| 108 | Providing and fixing Jaquar JCP-CHR-152415 Control Plate Opal as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Jaquar/Cera/Kerovit/Hindware orequivalent series of approved make) |
| 109 | Providing and fixing Jaquar Hand Dryer - BOLT HDR-SSF-AK2803D Bolt touch-free infrared hand dryer with 1150W rated power & carbon brush motor Material: 304 Stainless Steel Finish: Stainless Steel Finish as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Jaquar/Cera/Kerovit/Hindware or equivalent series of approved make) . |
| 110 | Providing and fixing Jaquar Paper Towel Dispenser - Towels with c/z Folds - Wall Mounted PTD-SAP-DT0106CSN capacity: 400-600 C/Z towels material: AISI 304 stainless steel finish: satin: Stainless Steel Finish as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Jaquar/Cera/Kerovit/Hindware or equivalent series of approved make) |
| 111 | Providing and fixing Stainless Steel Jaquar WAC-SAP-BR0600CSN Grab Bar 692 mm Long 350mm long as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Jaquar/ Cera/Kerovit /Hindware orequivalent series of approved make) |
| 112 | Providing and fixing Jaquar WAC-SAP-BG0800CSN U shape Grab Bar Vertical Swing 350mm long as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Jaquar/Cera/Kerovit/Hindware or equivalent series of approved make) |
| 113 | Providing and fixing Jaquar FUS-29083K Exposed Part Kit of Concealed Stop Cock & Flush Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange with Seal (compatible with ALD-083, ALD-089 or ALD-081) Make with flange as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Jaquar/Cera/Kerovit/Hindware or equivalent make) |
| 114 | Providing and fixing P.V.C connection Jaquar ALD-805B 450mm Long Braided Hose with Two 15mm Nuts & Rubber Washers Without Nipple (Suitable for Geysers) length with brass unions 300/450mm length as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Jaquar/Cera/Kerovit/Hindware or equivalent series of approved make). |
| 115 | Providing and fixing CERA VANITY CABINETS ARENZA Wall Mounted Cabinet + Light: 780 x 460 x 480 mm Cat. No. B3010113SG as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Jaquar/Cera/Kerovit/Hindware or equivalent series of approved make) |
| 116 | Providing and fixing CPA-1161 Double Coat Hook length with brass unions 300/450mm length as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Jaquar/Cera/Kerovit/Hindware or equivalent series of approved make) |
| 117 | Providing and fixing 100 to 125mm dia chilly make C.P. Grating (Heavy Duty) as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. |
| 118 | Providing and fixing G.I. Union (ISI Mark) Tata, Jindal (Hisar) or equivalent make (heavy duty) as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. i) 15 mm dia |
| 119 | Providing and fixing G.I. Union (ISI Mark) Tata, Jindal (Hisar) or equivalent make (heavy duty) as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. ii) 20 mm dia |
| 120 | Providing and fixing G.I. Union (ISI Mark) Tata, Jindal (Hisar) or equivalent make (heavy duty) as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. iii) 25 mm dia |
| 121 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof Providing and fixing G.I. Union (ISI Mark) as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. |
| 122 | Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed Steel conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. Make:- PVC pipe Diplast/Polyplast/Setia wires Havell's/Finolex accessories Legrand/Havell's. or as approved by the Engineer-in-charge. Group C. |
| 123 | Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed medium class PVC conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required and approved by the Engineer-in -Charge including carriage of materials within all leads, lifts and heights. Make:- PVC pipe Diplast/Polyplast/Setia wires Havell's/Finolex accessories Legrand/Havell's or as approved by the Engineer-in-charge. Group-C |
| 124 | Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed pvc conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. Make:- PVC pipe Diplast/Polyplast/Setia wires Havell's/Finolex or as approved by the Engineer-in-charge |
| 125 | Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed pvc conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. Make:- PVC pipe Diplast/Polyplast/Setia wires Havell's/Finolex or as approved by the Engineer-in-charge. |
| 126 | Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed pvc conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights.Make:- PVC pipe Diplast/ Polyplast/ Setia wires Havell's/Finolex or as approved by the Engineer-in-charge 2x1.5 Sq. mm. |
| 127 | Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed pvc conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. Make:- PVC pipe Diplast/ Polyplast/ Setia wires Havell's/Finolex or as approved by the Engineer-in-charge 2x6 Sq. mm. |
| 128 | Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed pvc conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. Make:- PVC pipe Diplast/Polyplast/Setia wires Havell's/Finolex or as approved by the Engineer-in-charge 2x 10 Sq. mm.. |
| 129 | Wiring for circuit / sub-main with 4x16 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.16 Sq.mm. (4x16+2x6) HRFRLS/ PVC insulated single core copper conductor cable for earthing as required as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. Make:- PVC pipe Diplast/Polyplast/Setia wires Havell's/Finolex or as approved by the Engineer-in-charge |
| 130 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.3*1.5 sqmm as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. Make:- PVC pipe Diplast/Polyplast/Setia wires Havell's/Finolex or as approved by the Engineer-in-charge |
| 131 | Supplying and drawing co-axial TV cable,RG-6 grade,0.7mm (75 Ohms) copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. Make:-wires Havell's/Finolex or as approved by the Engineer-in-charge |
| 132 | Supplying and drawing co-axial Telephone Cable copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. Make:-wires Havell's/Finolex or as approved by the Engineer-in-charge |
| 133 | Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. Make:- PVC pipe Diplast/Polyplast/Setia or as approved by the Engineer-in-charge 20 mm. dia |
| 134 | Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. 2 modules (78mmx78mmx50mm). Make:- Legrand/Havell's or as approved by the Engineer-in-Charge. |
| 135 | Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. Make:- Legrand/Havell's or as approved by the Engineer-in-Charge. TV socket Outlet modular |
| 136 | Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. Make:- Legrand/Havell's or as approved by the Engineer-in-Charge. Telephone socket socket Outlet modular |
| 137 | Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. Make:- Legrand/Havell's or as approved by the Engineer-in-Charge. |
| 138 | Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. Make:- Legrand/Havell's or as approved by the Engineer-in-Charge. |
| 139 | Supplying and fixingBuzzer Bell suitable for D.C./A.C. single phase,230 volts complete as required as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. Make:- Legrand/Havell's/Anchor or as approved by the Engineer-in-Charge. |
| 140 | Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. Make:- Legrand/Havell's/ Lauritz Knudsen (L&T) or as approved by the Engineer-in-Charge. Single pole. Cat-A. |
| 141 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. Make:- Legrand/Havell's/ Lauritz Knudsen (L&T) or as approved by the Engineer-in-Charge 63 Amps. Cat-A. |
| 142 | Supplying and fixing following rating, four pole, 415 volts, Isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. Make:- Legrand/Havell's/ Lauritz Knudsen (L&T) or as approved by the Engineer-in-Charge |
| 143 | Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. Make:- Legrand/Havell's/ Lauritz Knudsen (L&T) or as approved by the Engineer-in-Charge 63 Amps. Cat-A. |
| 144 | Supplying and fixing following rating, four pole (three phase & neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. Make:- Legrand/Havell's/ Lauritz Knudsen (L&T) or as approved by the Engineer-in-Charge 63 amp 4 pole |
| 145 | Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. Make:- Legrand/Havell's/ Lauritz Knudsen (L&T) or as approved by the Engineer-in-Charge Double door-16 way |
| 146 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V,on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (Legrand,havells make or as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. Make:- Legrand/Havell's/ Lauritz Knudsen (L&T) or as approved by the Engineer-in-Charge Double door-8 way (8+24),horizontal type |
| 147 | Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. Exhaust Fan, light duty, 250 mm sweep. Make:-Havell's/Usha/Khaitan or as approved by the Engineer-in-Charge |
| 148 | Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. Ventil Air DX white(Roof mounting) Make:-Havell's/Usha/Khaitan or as approved by the Engineer-in-Charge |
| 149 | Providing and installation of following type of LED strip 120 D 36 watt for 5 Mtr with 12 V 3 amp Driver complete with all accessories, including mounting clamps, connections, testing etc. as required: LED strip 120 D 36 watt for 5 Mtr with 12 V 3 amp Driver as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. Make:-Havell's/Panasonic/Philips or as approved by the Engineer-in-Charge |
| 150 | Providing and installation of stationary storage type Electric water heater (Geyser) Greta Prime Product code GHWVGPUMDB25 of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Nonreturn valve, Dead weight safety valve, 2 No C.P. connection rods 18\\" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required and approved by the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. Make:-Havell's/Sparehot/Racold/AO Smith or as approved by the Engineer-in-Charge 25 Liter capacity water heater (Cat-A) |
| 151 | Providing and installation of following type of Austra ARC LED Batten 20 W3 in 1 CCT option product codeLHEBFOPNIA7W020 complete with all accessories, connections, testing etc of Havells and equivalent Make as required approved by Engineer in Charge including carriage of materials within all leads, lifts and heights. Make:-Havell's/Philips/Panasonic or as approved by the Engineer-in-Charge |
| 152 | Providing and installation of following type of surface/Recess/SURFACE mounting square/round type LED panel Light ft 6 Watt with aluminium die cast housing in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, nonintegral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, PRODUCT CODE VIBEFLRDDLR6WLED840S Recess/surface 6 W LED complete with all accessories, connections, testing etc. as required of Approved Make as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. Make:-Havell's/Philips/Panasonic or as approved by the Engineer-in-Charge |
| 153 | Providing and installation of following type of surface/Recess/SURFACE mounting square/round type LED panel Light ft 9 Watt with aluminium die cast housing in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, nonintegral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, PRODUCT CODE INTEGRAPLUSDLRD9WLED840 complete with all accessories, connections, testing etc. as required of Approved make : Recess/surface 9 W LED as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. Make:-Havell's/Philips/Panasonic or as approved by the Engineer-in-Charge |
| 154 | Providing and installation of following type of Chandeliers 400 mm with Adjustable Lighting tones (cool,warm,neutral) having Premium Acrylic Ring with Golden Metal Frame complete with all accessories, connections, testing etc. as required of Approved make as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. Make:-Havell's/Philips/Panasonic/Jaquar or as approved by the Engineer-in-Charge |
| 155 | Providing and installation of Legrand Britzy Key Card Switch of 16 amp of Legrand or Equivalent make as required and appoved by Engineer in charge as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. Make:- Legrand/Havell's or as approved by the Engineer-in-Charge. |
| 156 | Supplying, Installation, errection, testing and commissioning of split type room air conditioner Hot & Cold Inverter (Variable Speed) (3 star rating) air conditioners confirming to IS:1391 (Part-2) 1992 with amendments No. 1 & 2 fitted with Rotary compressor operating on Refrigerant should be enviorement friendly suitable for wall mounting of ISI Marked (Inverter technology).1.5 Ton Hot & Cold as required including carriage of materials within all leads, lifts and heights. Make:-L.G./Samsung/Carrier or as approved by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender