Tender For Design, Manufacture, Supply, Testing And Commissioning Of 60 Numbers Of Standard Gauge Cars For Hyderabad Metro Project Including Training And Comprehensive Maintenance For These 60 Numbers Standard Gauge Cars As Well As Depot M&Ps, Specia
Tender Overview
Project Description
Tender for Design, Manufacture, Supply, Testing And Commissioning Of 60 Numbers Of Standard Gauge Cars For Hyderabad Metro Project Including Training And Comprehensive Maintenance For These 60 Numbers Standard Gauge Cars As Well As Depot M&Ps, Special Tools, Jigs And Fixtures, Testing And Diagnostic Equipment, Test Benches, Material Handling Equipment Etc. For A Period Of Fifteen Years.
BOQ
| Sl. No. | Item Description |
| 1 | Item Wise BoQ BoQ_Ver3.0 Item Wise Normal INR and Other Currency INR,USD,JPY,EUR Select, Excess (+), Less (-) Tender Inviting Authority: Senior General Manager/Rolling Stock-III (Sr. GM/RS-III) Name of Work: Design, Manufacture, Supply, Testing and Commissioning of 60 Numbers of Standard Gauge Cars for Hyderabad Metro Project including Training and Comprehensive Maintenance for these 60 Numbers Standard Gauge Cars as well as Depot M&Ps, Special tools, Jigs and Fixtures, Testing and Diagnostic Equipment, Test Benches, Material Handling Equipment etc. for a period of Fifteen Years. Contract No: HRS1 Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. COST CENTRE DESCRIPTION Item Code / Make Quantity Cost Centre Estimated Rate inRs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency Total Apportioned/Actual Amounts of Cost Centre Items Excise Duty inRs. P GST inRs. P Freight Charges ( Unloading & Stacking) inRs. P Any Other Taxes/Duties/Levies inRs. P Other Taxes 2 inRs. P IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax inRs. P Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category inRs. P TOTAL AMOUNT, It will be converted based on coloumn L value TOTAL TAXES It will be converted only If you choose Full Conversion, Until than it is treated as INR inRs. P TOTAL AMOUNT In Words |
| 2 | PRELIMINARIES & GENERAL REQUIREMENTS AND DESIGN OF ROLLING STOCK (INR) |
| 3 | PRELIMINARIES & GENERAL REQUIREMENTS AND DESIGN OF ROLLING STOCK (USD) |
| 4 | PRELIMINARIES & GENERAL REQUIREMENTS AND DESIGN OF ROLLING STOCK (JPY) |
| 5 | PRELIMINARIES & GENERAL REQUIREMENTS AND DESIGN OF ROLLING STOCK (EUR) |
| 6 | OFFSHORE MANUFACTURE, DISPATCH, COMPLETION OF SHIPPING TO PORT IN INDIA, INLAND TANSPORTATION IN INDIA, DELIVERY & RECEIPT OF CARS IN DEPOT (INR) |
| 7 | OFFSHORE MANUFACTURE, DISPATCH, COMPLETION OF SHIPPING TO PORT IN INDIA, INLAND TANSPORTATION IN INDIA, DELIVERY & RECEIPT OF CARS IN DEPOT (USD) |
| 8 | OFFSHORE MANUFACTURE, DISPATCH, COMPLETION OF SHIPPING TO PORT IN INDIA, INLAND TANSPORTATION IN INDIA, DELIVERY & RECEIPT OF CARS IN DEPOT (JPY) |
| 9 | OFFSHORE MANUFACTURE, DISPATCH, COMPLETION OF SHIPPING TO PORT IN INDIA, INLAND TANSPORTATION IN INDIA, DELIVERY & RECEIPT OF CARS IN DEPOT (EUR) |
| 10 | INDIGENOUS MANUFACTURE, DISPATCH, INLAND TRANSPORTATION IN INDIA, DELIVERY AND RECEIPT OF CARS IN DEPOT (INR) |
| 11 | INDIGENOUS MANUFACTURE, DISPATCH, INLAND TRANSPORTATION IN INDIA, DELIVERY AND RECEIPT OF CARS IN DEPOT (USD) |
| 12 | INDIGENOUS MANUFACTURE, DISPATCH, INLAND TRANSPORTATION IN INDIA, DELIVERY AND RECEIPT OF CARS IN DEPOT (JPY) |
| 13 | INDIGENOUS MANUFACTURE, DISPATCH, INLAND TRANSPORTATION IN INDIA, DELIVERY AND RECEIPT OF CARS IN DEPOT (EUR) |
| 14 | TESTING AND COMMISSIONING IN THE DEPOT, INTEGRATED TESTING AND COMMISSIONING ON THE SECTION, SERVICE TRIALS AND FINAL COMMISSIONING OF TRAINS (INR) |
| 15 | TESTING AND COMMISSIONING IN THE DEPOT, INTEGRATED TESTING AND COMMISSIONING ON THE SECTION, SERVICE TRIALS AND FINAL COMMISSIONING OF TRAINS (USD) |
| 16 | TESTING AND COMMISSIONING IN THE DEPOT, INTEGRATED TESTING AND COMMISSIONING ON THE SECTION, SERVICE TRIALS AND FINAL COMMISSIONING OF TRAINS (JPY) |
| 17 | TESTING AND COMMISSIONING IN THE DEPOT, INTEGRATED TESTING AND COMMISSIONING ON THE SECTION, SERVICE TRIALS AND FINAL COMMISSIONING OF TRAINS (EUR) |
| 18 | COMPREHENSIVE MAINTENANCE OF 60 NUMBERS STANDARD GAUGE CARS AS WELL AS DEPOT M&PS, SPECIAL TOOLS, JIGS AND FIXTURES, TESTING AND DIAGNOSTIC EQUIPMENT, TEST BENCHES, MATERIAL HANDLING EQUIPMENT ETC. IN THE DEPOT (CLAUSE A1.1 OF ITT) FOR DLMP (INR) |
| 19 | COMPREHENSIVE MAINTENANCE OF 60 NUMBERS STANDARD GAUGE CARS AS WELL AS DEPOT M&PS, SPECIAL TOOLS, JIGS AND FIXTURES, TESTING AND DIAGNOSTIC EQUIPMENT, TEST BENCHES, MATERIAL HANDLING EQUIPMENT ETC. IN THE DEPOT (CLAUSE A1.1 OF ITT) FOR DLMP (USD) |
| 20 | COMPREHENSIVE MAINTENANCE OF 60 NUMBERS STANDARD GAUGE CARS AS WELL AS DEPOT M&PS, SPECIAL TOOLS, JIGS AND FIXTURES, TESTING AND DIAGNOSTIC EQUIPMENT, TEST BENCHES, MATERIAL HANDLING EQUIPMENT ETC. IN THE DEPOT (CLAUSE A1.1 OF ITT) FOR DLMP (JPY) |
| 21 | COMPREHENSIVE MAINTENANCE OF 60 NUMBERS STANDARD GAUGE CARS AS WELL AS DEPOT M&PS, SPECIAL TOOLS, JIGS AND FIXTURES, TESTING AND DIAGNOSTIC EQUIPMENT, TEST BENCHES, MATERIAL HANDLING EQUIPMENT ETC. IN THE DEPOT (CLAUSE A1.1 OF ITT) FOR DLMP (EUR) |
| 22 | UNIT EXCHANGE SPARES, MANDATORY SPARES AND SPECIAL TOOLS, JIGS, FIXTURES, GAUGES, TESTING AND DIAGNOSTIC EQUIPMENT (INR) |
| 23 | UNIT EXCHANGE SPARES, MANDATORY SPARES AND SPECIAL TOOLS, JIGS, FIXTURES, GAUGES, TESTING AND DIAGNOSTIC EQUIPMENT (USD) |
| 24 | UNIT EXCHANGE SPARES, MANDATORY SPARES AND SPECIAL TOOLS, JIGS, FIXTURES, GAUGES, TESTING AND DIAGNOSTIC EQUIPMENT (JPY) |
| 25 | UNIT EXCHANGE SPARES, MANDATORY SPARES AND SPECIAL TOOLS, JIGS, FIXTURES, GAUGES, TESTING AND DIAGNOSTIC EQUIPMENT (EUR) |
| 26 | TRAINING AND MANUALS (INR) |
| 27 | TRAINING AND MANUALS (USD) |
| 28 | TRAINING AND MANUALS (JPY) |
| 29 | TRAINING AND MANUALS (EUR) Total in Figures 0.0 0.0 29 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select % 0.0 0.0 29 Quoted Rate in Words DELHI METRO RAIL CORPORATION LIMITED DESIGN, MANUFACTURE, SUPPLY, TESTING, AND COMMISSIONING OF 60 NUMBERS OF STANDARD GAUGE CARS FOR HYDERABAD METRO PROJECT INCLUDING TRAINING AND COMPREHENSIVE MAINTENANCE FOR THESE 60 NUMBERS STANDARD GAUGE CARS AS WELL AS DEPOT M&PS, SPECIAL TOOLS, JIGS AND FIXTURES, TESTING AND DIAGNOSTIC EQUIPMENT, TEST BENCHES, MATERIAL HANDLING EQUIPMENT ETC. FOR A PERIOD OF FIFTEEN YEARS. INSTRUCTION TO TENDERERS Annexure ITT-2B-I PRICING DOCUMENT TENDER TOTAL LUMP SUM PRICE To be Completed and Submitted as part of Appendix FT-2 to the Form of Tender (THIS DOCUMENT IS TO BE PREPARED AND COMPLETED BY THE TENDERER) I. The 'Tender Total Lumpsum Price' of this Contract (10 trains of 6 cars each i.e. 60 Cars) is INDIAN CURRENCY (IN WORDS) INR Foreign currency (I) IN WORDS USD Foreign currency (II) IN WORDS JPY Foreign currency (III) IN WORDS EUR II. Tender Total Lumpsum Price' of this Contract is: \\"FIXED LUMPSUM PRICE\\" III. Apportionment of Tender Total Lump Sum Price among Cost Centres Cost Centre COST CENTRE DESCRIPTION Total Apportioned/Actual Amounts of Cost Centre Items Foreign currency (I) Foreign currency (II) Foreign currency (III) Indian Rupees USD JPY EUR INR A. Preliminaries & General Requirements and Design of Rolling Stock 0.0 0.0 0.0 0.0 B. Offshore Manufacture, Factory Testing, Inspection, despatch of cars from off-shore factory, Shipping to port in India, Marine Insurance, transit Insurance from Port in India to Depot Site, Inland Transportation of offshore manufactured trains within India including handling charges at port in India, depot or at any other place, and all other incidental costs, delivery and receipt of cars in depot 0.0 0.0 0.0 0.0 C. Indigenous Manufacture, Factory Testing, Inspection and Despatch of cars from onshore factory, transit insurance from factory to Depot Site, Inland Transportation of Indigenous manufactured trains within India including handling charges at depot or at any other place, and all other incidental costs, delivery and receipt of cars in depot. 0.0 0.0 0.0 0.0 D. Formation of trains in depot, satisfactory completion of tests and running of train in the depot, Integrated Testing and Commissioning of Trains on the section, Service Trials and final commissioning. 0.0 0.0 0.0 0.0 E. Comprehensive Maintenance of 60 numbers Standard Gauge Cars as well as Depot M&Ps, Special Tools, Jigs and Fixtures. Testing and Diagnostic Equipment, Test Benches, Material Handling Equipment etc. in Depot (Clause A1.1 of ITT) for DLMP 0.0 0.0 0.0 0.0 F. NOT USED 0.0 0.0 0.0 0.0 G. Unit Exchange Spares, Mandatory Spares and Special tools Jigs, Fixtures Gauges, Testing and diagnostic equipment 0.0 0.0 0.0 0.0 H. Training and Manuals 0.0 0.0 0.0 0.0 TENDER TOTAL LUMPSUM PRICE (inclusive of all taxes and duties except GST) 0.0 0.0 0.0 0.0 Note: 1. The contract price shall be inclusive of all Central/State/Local Taxes/Custom Duty, duties, levies, cess and all other incidental charges required to fulfil the tender conditions including statutory deductions viz., TDS towards Income Tax/GST/Labour Cess and any other taxes etc. except GST which will be paid extra as applicable and payable by Contractor under forward charge mechanism. 2. Deleted 3. The 'Tender Total Lumpsum Price' quoted for this contract shall be final, No conditional or unconditional discount can be offered on this 'Tender Total Lumpsum Price '. In case of non-compliance the offered discount shall be treated as NULL and VOID and stand withdrawn. 4. It is certified that 'Annexure ITT-2B' annexed in Technical package is a \\"TRUE COPY\\" (with prices blanked off) of the said 'Annexure ITT-2B' in the Financial Package INSTRUCTION TO TENDERERS Annexure ITT-2B-I PRICING DOCUMENT NOT USED INSTRUCTION TO TENDERERS Attachment I to Annexure ITT-2B-I PRICING DOCUMENT Taxes and Duties* NOT USED DELHI METRO RAIL CORPORATION LIMITED DESIGN, MANUFACTURE, SUPPLY, TESTING, AND COMMISSIONING OF 60 NUMBERS OF STANDARD GAUGE CARS FOR HYDERABAD METRO PROJECT INCLUDING TRAINING AND COMPREHENSIVE MAINTENANCE FOR THESE 60 NUMBERS STANDARD GAUGE CARS AS WELL AS DEPOT M&PS, SPECIAL TOOLS, JIGS AND FIXTURES, TESTING AND DIAGNOSTIC EQUIPMENT, TEST BENCHES, MATERIAL HANDLING EQUIPMENT ETC. FOR A PERIOD OF FIFTEEN YEARS. (To be Submitted as part of Appendix FT-2 to the Form of Tender) Annexure ITT-2B-1 INDEX OF COST CENTRES COST CENTRE DESCRIPTION A PRELIMINARIES & GENERAL REQUIREMENTS AND DESIGN OF ROLLING STOCK AND PROVISION OF MOCKUPS B OFFSHORE MANUFACTURE, DISPATCH, COMPLETION OF SHIPPING TO PORT IN INDIA, INLAND TANSPORTATION IN INDIA, DELIVERY & RECEIPT OF CARS IN DEPOT C INDIGENOUS MANUFACTURE, DISPATCH, INLAND TRANSPORTATION IN INDIA, DELIVERY AND RECEIPT OF CARS IN DEPOT D TESTING AND COMMISSIONING IN THE DEPOT, INTEGRATED TESTING AND COMMISSIONING OF TRAINS, SERVICE TRIALS AND FINAL COMMISSIONING OF TRAINS E COMPREHENSIVE MAINTENANCE OF 60 NUMBERS STANDARD GAUGE CARS AS WELL AS DEPOT M&Ps, JIGS AND FIXTURES, TESTING AND DISGNOSTIC EQUIPMENT, TEST BENCHES, MATERIAL HANDLING EQUIPMENT etc. IN DEPOT (Clause A1.1 of ITT) FOR DLMP F NOT USED G UNIT EXCHANGE SPARES, MANDATORY SPARES AND SPECIAL TOOLS, JIGS, FIXTURES, GAUGES, TESTING AND DIAGNOSTIC EQUIPMENT H TRAINING AND MANUALS INSTRUCTION TO TENDERERS PRICING DOCUMENT Annexure ITT-2B-1 SCHEDULE OF AMOUNTS APPORTIONED TO COST CENTRES COST CENTRE DESCRIPTIONS (To be Completed and Submitted as part of Appendix FT-2 to the Form of Tender COST CENTRE No. A - Preliminaries & General Requirements and Design of Rolling Stock and provision of mockups. This Cost Centre comprises all those obligations and ongoing activities throughout the Contract not associated directly with any other Cost Centre. This includes but is not limited to: · Submission of Project Management Plan; · Submission of Interface Management Plan and Detailed Interface Documents; · Submission of Works Programme; · Submission of Design Submission Programme; · Submission of Quality Assurance Plan; · Submission of Safety Assurance Plan and Site Safety Plan; · Submission of Environmental Plan; · Submission of Software Quality Assurance Plan; · Submission of Inspection, Testing & Commissioning (including Integrated Testing & Commissioning) Plan; · Liaison with other Designated Contractors during the design process; · Submission of the Preliminary Design, the pre-Final Design, the Final Design; · Submission of the Final Design Document; · Site Management Plan · Obosolescence Management Plan · Submission of “Comprehensive Annual Maintenance (CAMC) Plan; · Reliability, Availability and Maintainability Plan · Submission of “As-Built drawings; · Preparation of Mock-up for Rolling Stock; · Any other item considered necessary to comply with the Scope of Work. Note: 1. The maximum amount that can be apportioned in this Cost Centre shall not exceed 10% of the total amount apportioned in Cost Centres A, B, C and D.2. It is certified that 'Annexure ITT-2B-1' annexed in Technical Package is a \\"TRUE COPY\\" (with prices blanked off) of the said 'Annexure ITT-2B-1' in the Financial Package. SIGNATURE OF TENDERER COST CENTRE No. A - PRELIMINARIES & GENERAL REQUIREMENTS AND DESIGN OF ROLLING STOCK AND PROVISION OF MOCKUPS. MILESTONE NUMBER WORK DESCRIPTION APPORTIONED AMOUNT WEEKS FOR COMPLETION OF MILESTONE FROM COMMENCEMENT DATE Foreign currency (I) Foreign currency (II) Foreign currency (III) INDIAN RUPEES USD JPY EUR INR MILESTONE ACTIVITY COLUMN A COLUMN B COLUMN C COLUMN D Obtain the “Notice of No Objection” or “Notice of No Objection Subject to ---“ from the Engineer for: A1 Project Management Plan. 41153.0 41213.0 41183.0 A2 Interface Management Plan and Detailed Interface Documents. 41153.0 41213.0 41183.0 A3 Works Programme. 41153.0 41213.0 41183.0 A4 Design Submission Programme. 62.0 61.0 A5 Quality Assurance Plan. 41153.0 41213.0 41183.0 A6 System Safety Assurance Plan and Site Safety Plan. 41153.0 41213.0 41183.0 A7 Environmental Plan. 41153.0 41213.0 41183.0 A8 Software Quality Assurance Plan. 41153.0 41213.0 41183.0 A9 Inspection, Testing, and Commissioning and Integrated Testing and Commissioning Plan. 41153.0 41213.0 41183.0 A10 Preliminary Design Submission 41153.0 41213.0 41183.0 A11 Pre-Final Design Submisison 41153.0 41213.0 41183.0 A12 Final Design Submission 41153.0 41213.0 41183.0 A13 Final Design Document Delivery. 41153.0 41213.0 41183.0 A14 Site Management Plan. A15 Obosolescence Management Plan. A16 Comprehensive Annual Maintenance (CAMC) Plan. A17 Reliability, Availability and Maintainability Plan. A18 “As-Built Drawings” delivery. 41153.0 41213.0 41183.0 A19 Mock Up at specified location A20 Any other item considered necessary by the contractor to comply with the Scope of Work. COST CENTRE TOTAL 0.0 0.0 0.0 0.0 Note: 1. The maximum amount that can be apportioned in this Cost Centre shall not exceed 10% of the amount apportioned in Cost Centres A, B, C and D. 2. IIt is certified that 'Annexure ITT-2B-1' annexed in Technical Package is a \\"TRUE COPY\\" (with prices blanked off) of the said 'Annexure ITT-2B-1' in the Financial Package. SIGNATURE OF TENDERER COST CENTRE No. 'B' - OFFSHORE MANUFACTURE, DISPATCH, COMPLETION OF SHIPPING TO PORT IN INDIA, INLAND TANSPORTATION IN INDIA, DELIVERY & RECEIPT OF CARS IN DEPOT This Cost Centre comprises all those obligations and ongoing activities throughout the Contract not associated directly with any other Cost Centre.This includes but is not limited to: . selection of suppliers for major system and sub-systems for trains; . completion of all routine and type testing of equipment; . completion of Main Tooling for manufacture; . completion of all Factory Acceptance Tests; . completion of test running in factory; . completion of manufacture, testing and inspection, dispatch from offshore factory and shipping port of first prototype train; . provision of Marine and Transit Insurance from off-shore Factory to Depot Site in Hyderabad . completion of manufacture, testing and inspection, dispatch from offshore factory and shipping port of balance trains; . completion of shipping to port in India, Inland transportation in India, delivery and receipt of cars in HMRL depot in good condition; . transportation costs off-shore manufactured trains from the offshore port to port in India, port in India to Depot in Hyderabad; . all handling costs and incidental charges at port in India, Depot and any intermediate location in India; . all costs associated with special traffic arrangements necessary for transportation; . any other item considered necessary to comply with the scope of work. COST CENTRE No. B – OFFSHORE MANUFACTURE, DISPATCH, COMPLETION OF SHIPPING TO PORT IN INDIA, INLAND TRANSPORTATION IN INDIA, DELIVERY AND RECEIPT OF CARS IN DEPOT MILESTONE NUMBER WORK DESCRIPTION APPORTIONED AMOUNT WEEKS FOR COMPLETION OF MILESTONE FROM COMMENCEMENT DATE FOREIGN CURRENCY(I) FOREIGN CURRENCY(II) FOREIGN CURRENCY(III) INDIAN RUPEES USD JPY EUR INR MILESTONE ACTIVITY COLUMN A COLUMN B COLUMN C COLUMN D Obtain the “Notice of No Objection” or “Notice of No Objection Subject to ---“ from the Engineer after:• Issue of Inspection Certificate on satisfactory completion of all Factory Tests;• Marine Insurance;• Documents for shipment to Indian Port;• Dispatch of cars from offshore factory and shipping port;• Transit insurance from Port in India to Depot Site in Hyderabad; and• Completion of shipping to port in India, Inlandtransportation in India, Delivery and Receipt of cars in the Depot in Hyderabad in good condition; For: B1 First Prototype Offshore manufactured 6-car train. B2 Obtain as above for second Offshore Manufactured 6-car Train. COST CENTRE TOTAL 0.0 0.0 0.0 0.0 NOTES: 1. The apportioned amounts (both foreign currency and local currency) shall be same for each Milestone. 2. The maximum no. of Cars that can be manufactured off-shore are 12 (twelve) cars (i.e. 02 nos. of 6 car trainsets). Contractor at his option may reduce the number of trains manufactured off-shore.3. It is certified that 'Annexure ITT-2B-1' annexed in Technical Package is a \\"TRUE COPY\\" (with prices blanked off) of the said 'Annexure ITT-2B-1' in the Financial Package. SIGNATURE OF TENDERER COST CENTRE No. 'C' – INDIGENOUS MANUFACTURE, DISPATCH, INLAND TRANSPORTATION IN INDIA, DELIVERY AND RECEIPT OF CARS IN DEPOT This Cost Centre comprises all those obligations and ongoing activities throughout the Contract not associated directly with any other Cost Centre. This includes but is not limited to: · selection of suppliers for major system and sub-systems for trains; · completion of all routine and type testing of components and equipment; · completion of Main Tooling for manufacture; · completion of all factory acceptance tests; · completion of test running in factory; · completion of manufacture, testing and inspection, dispatch, transit insurance ex. Factory to Depot site in Hyderabad; · Inland transportation in India, delivery and receipt of cars in Depot in good condition; · transportation costs of indigenously manufactured trains from Factory in India to Depot Site in Hyderabad · all handling costs and incidental charges at factory in India, Depot and any intermediate location in India; · all costs associated with special traffic arrangements necessary for transportation; · any other item considered necessary to comply with the scope of work. SIGNATURE OF TENDERER COST CENTRE No. C – INDIGENOUS MANUFACTURE, DISPATCH INLAND TRANSPORTATION IN INDIA, DELIVERY AND RECEIPT OF CARS IN DEPOT MILESTONE NUMBER WORK DESCRIPTION APPORTIONED AMOUNT WEEKS FOR COMPLETION OF MILESTONE FROM COMMENCEMENT DATE FOREIGN CURRENCY (I) FOREIGN CURRENCY (II) FOREIGN CURRENCY (III) INDIAN RUPEES USD JPY EUR INR MILESTONE ACTIVITY COLUMN A COLUMN B COLUMN C COLUMN D Obtain the “Notice of No Objection” or “Notice of No Objection Subject to ---“ from the Engineer after:• Issue of Inspection Certificate on satisfactory completion of all Factory Tests;• Transit Insurance;• Dispatch Documents;• Dispatch of cars from onshore factory;• Inland transportation in India, delivery and receipt of cars in the Depot in Hyderabad in good condition; For: C1 Obtain as above for First Indigenously Manufactured Prototype 6-cars Train. C2 Obtain as above for Second Indigenously Manufactured 6-cars Train. C3 Obtain as above for Third Indigenously Manufactured 6-cars Train. C4 Obtain as above for Fourth Indigenously Manufactured 6-cars Train. C5 Obtain as above for Fifth Indigenously Manufactured 6-cars Train. C6 Obtain as above for Sixth Indigenously Manufactured 6-cars Train. C7 Obtain as above for Seventh Indigenously Manufactured 6-cars Train. C8 Obtain as above for Eighth Indigenously Manufactured 6-cars Train. C9 Obtain as above for Ninth Indigenously Manufactured 6-cars Train. C10 Obtain as above for Tenth Indigenously Manufactured 6-cars Train. COST CENTRE TOTAL 0.0 0.0 0.0 0.0 NOTES: 1.The apportioned amounts (both foreign currency and local currency) shall be same for each Milestone. 2. Contractor at his option may increase the number of cars manufactured indigenously. However, the number of cars manufactured indigenously shall not be less than 48 (Forty Eight) cars (i.e. 08 nos. of 6-car trainsets). 3. It is certified that 'Annexure ITT-2B-1' annexed in Technical Package is a \\"TRUE COPY\\" (with prices blanked off) of the said 'Annexure ITT-2B-1' in the Financial Package. SIGNATURE OF TENDERER COST CENTRE D - TESTING AND COMMISSIONING IN THE DEPOT, INTEGRATED TESTING AND COMMISSIONING ON THE SECTION, SERVICE TRIALS AND FINAL COMMISSIONING OF TRAINS This Cost Centre comprises all those obligations and ongoing activities throughout the Contract not associated directly with any other Cost Centre. This includes but is not limited to: . Formation of trains, completion of functional tests and running of trains in the Depot. . Integrated testing and commissioning of trains in the nominated Depot and on the sections in conjunction with other Designated Contractors. . Instrumentation Tests and Oscillation trials on prototype trains only as necessary for obtaining sanction of statutory authorities. . Service trial and Final commissioning of trains. . All instrumentation, computers, and any other item including supervisory and operating staff essential for testing, commissioning and service trials of trains etc. will be provided by the Contractor. . Any other item considered necessary to comply with the scope of Works. Note: 1. The Minimum amount that shall be apportioned in the cost centres 'D' shall not be less than 10% of the amount apportioned in Cost Centres ‘A’, ‘B', ‘C’ and 'D’. SIGNATURE OF TENDERER COST CENTRE 'D' - TESTING AND COMMISSIONING IN THE DEPOT, INTEGRATED TESTING & COMMISSIONING ON THE SECTION, SERVICE TRIALS AND FINAL COMMISSIONING OF TRAINS MILESTONE NUMBER WORK DESCRIPTION APPORTIONED AMOUNT WEEKS FOR COMPLETION OF MILESTONE IN WEEKS FROM COMMENCEMENT DATE FOREIGN CURRENCY(I) FOREIGN CURRENCY(II) FOREIGN CURRENCY(III) INDIAN RUPEES USD JPY EUR INR MILESTONE ACTIVITY COLUMN A COLUMN B COLUMN C COLUMN D Obtain the “Notice of No Objection” or “Notice of No Objection Subject to ---“ from the Engineer after:• Formation of train, obtaining certificate of satisfactory completion of functional tests and running of train in the Depot.• Completion of Integrated Testing and Commissioning in the Depot;• Completion of integrated testing and commissioning on the section in conjunction with Designated contractors;• ** Instrumentation Tests, Oscillation trials;• Service Trials and Final Commissioning;• ** Sanction of Statutory Authorities of Test results.For: D1 Obtain as above for First Prototype 6-cars Train. D2 Obtain as above for second 6-cars Train. D3 Obtain as above for Third 6-cars Train. D4 Obtain as above for Fourth 6-cars Train. D5 Obtain as above for Fifth 6-cars Train. D6 Obtain as above for Sixth 6-cars Train. D7 Obtain as above for seventh 6-cars Train. D8 Obtain as above for Eighth 6-cars Train. D9 Obtain as above for Nineth 6-cars Train. D10 Obtain as above for Tenth 6-cars Train. COST CENTRE TOTAL 0.0 0.0 0.0 0.0 **These are applicable to Prototype Trains Only NOTES: 1.The apportioned amounts (both foreign currency and local currency) shall be same for each Milestone.2.The minimum amount that shall be apportioned in the cost centres 'D' shall not be less than 10% of the amount apportioned in Cost Centres 'A','B','C' and 'D'.3. It is certified that 'Annexure ITT-2B-1' annexed in Technical Package as a \\"TRUE COPY\\" (with prices blanked off) of the said 'Annexure ITT-2B-1' in the Financial Package. SIGNATURE OF TENDERER COST CENTRE: ECOMPREHENSIVE MAINTENANCE OF 60 NUMBERS STANDARD GAUGE CARS AS WELL AS DEPOT M&Ps, SPECIAL TOOLS, JIGS AND FIXTURES, TESTING AND DIAGNOSTIC EQUIPMENT, TEST BENCHES, MATERIAL HANDLING EQUIPMENT ETC. IN THE DEPOT (CLAUSE A1.1 of ITT) FOR DLMP Scope of Cost Centre: This cost centre comprises of all those obligations and activities connected with the Comprehensive maintenance of Rolling Stock, Depot and M&Ps including provision of all requisite maintenance & overhauling spares and consumables, supervision of maintenance, provision of maintenance manpower, supply of Training, Maintenance Manuals, Maintenance of Depot Machinery and Plants (M&Ps) including provision and maintenance of special tools, jigs, fixtures, gauges, testing and diagnostic equipment, Test Benches, Material Handling Equipment etc. in the Depot (Clause A1.1 of ITT) during DLMP. Tenderer to refer to ERGS Chapter 8 and ERGS Chapter 15 to 19 for the complete details of the Scope of Work. NOTES: 1. The tenderer shall quote the Lump Sum Comprehensive Annual Maintenance Cost (in four quarters) for the described scope of works as per ERGS Chapter 8 and ERGS Chapters 15 to 19 ,Clause A1.1 of ITT during the DLMP as per the attached milestone schedule for cost centre E for the milestones E-1 to E-10 . 2. Deleted. 3. The tenderer shall note that the quoted cost under this cost centre shall cover the overall maintenance requirement as per the described scope of work as per ERGS Chapter 8 and ERGS Chapters 15 to 19 (Clause A1.1 of ITT). 4. Deleted. 5. It is certified that 'Annexure ITT-2B-1' annexed in Technical Bid is a \\"TRUE COPY\\" (with prices blanked off) of the said 'Annexure ITT-2B-1' in the Price Bid. 6. The ‘Cost Center Total’ under this Cost Centre shall be more than or equal to 25% of the Bid Total excluding Cost Centre-H. 7. Deleted. 8. The custom duty on items procured for meeting the obligations under cost centre ‘E’ shall included in the Quoted Price, no extra reimbursement of taxes & Custom Duty shall be made. The Quoted Price in Cost Centre-E shall be inclusive of all Taxes & Duties (including Custom Duty) excluding GST. COST CENTRE: E COMPREHENSIVE MAINTENANCE OF 60 NUMBERS STANDARD GAUGE CARS AS WELL AS DEPOT M&PS, SPECIAL TOOLS, JIGS AND FIXTURES, TESTING AND DIAGNOSTIC EQUIPMENT, TEST BENCHES, MATERIAL HANDLING EQUIPMENT ETC. IN THE DEPOT (CLAUSE A1.1 of ITT) FOR DLMP Milestone Number WORK DESCRIPTION Foreign Currency(I) Foreign Currency(II) FOREIGN CURRENCY(III) Indian Rupees (IV) Fixed Apportioned Percentage USD JPY EUR INR MILESTONE ACTIVITY (Column 'A') (Column 'B') (Column 'C') (Column 'D') Obtain the “Notice of No Objection” or “Notice of No Objection Subject to------“from the Engineer for the Comprehensive Maintenance of Rolling Stock, Depot, Machinery & Plants, Special Tools, Jigs, Fixtures, Gauges, Testing and Diagonostic Equipment in the Depot (as per ERGS chapter 15 to 19) (Clause A1.1 of ITT): TOTAL MAINTENANCE COST FOR 10 NUMBERS 6 CARS TRAINSETS AS WELL AS DEPOT M&PS, SPECIAL TOOLS, JIGS AND FIXTURES, TESTING AND DIAGNOSTIC EQUIPMENT, TEST BENCHES, MATERIAL HANDLING EQUIPMENT ETC for a period of 15 years/Cost Centre Total DLMP period in Years 15.0 Number of 6 Car Traisets 10.0 Average Maintenance Amount per Year for each 6-Car Trainset 0.0 0.0 0.0 0.0 1.0 E1 Apportioned Amount for each 6-Car Trainset for First Service Year 0.0 0.0 0.0 0.0 0.3 E2 Apportioned Amount for each 6-Car Trainset for Second Service Year 0.0 0.0 0.0 0.0 0.3 E3 Apportioned Amount for each 6-Car Trainset for Third Service Year 0.0 0.0 0.0 0.0 0.9 E4 Apportioned Amount for each 6-Car Trainset for Fourth Service Year 0.0 0.0 0.0 0.0 1.3 E5 Apportioned Amount for each 6-Car Trainset for Fifth Service Year 0.0 0.0 0.0 0.0 0.9 E6 Apportioned Amount for each 6-Car Trainset for Sixth Service Year 0.0 0.0 0.0 0.0 1.1 E7 Apportioned Amount for each 6-Car Trainset for Seventh Service Year 0.0 0.0 0.0 0.0 1.0 E8 Apportioned Amount for each 6-Car Trainset for Eighth Service Year 0.0 0.0 0.0 0.0 1.8 E9 Apportioned Amount for each 6-Car Trainset for Ninth Service Year 0.0 0.0 0.0 0.0 0.9 E10 Apportioned Amount for each 6-Car Trainset for Tenth Service Year 0.0 0.0 0.0 0.0 1.1 E11 Apportioned Amount for each 6-Car Trainset for Eleventh Service Year 0.0 0.0 0.0 0.0 1.0 E12 Apportioned Amount for each 6-Car Trainset for Twelfth Service Year 0.0 0.0 0.0 0.0 1.3 E13 Apportioned Amount for each 6-Car Trainset for Thirteenth Service Year 0.0 0.0 0.0 0.0 1.0 E14 Apportioned Amount for each 6-Car Trainset for Fourteenth Service Year 0.0 0.0 0.0 0.0 1.1 E15 Apportioned Amount for each 6-Car Trainset for Fifteenth Service Year 0.0 0.0 0.0 0.0 1.0 TOTAL Apportioned Amount for each 6-Car Trainset for 15 year 0.0 0.0 0.0 0.0 Note:1. Deleted.2.The Maintenance Amount shall be payable on quarterly basis on completion of each quarter of Accounting Year. The 1st Quarter (Q1) of the Accounting Year shall begin on 1st April of each year and 2nd Quarter (Q2) on 1st July, 3rd Quarter (Q3) on 1st October and 4th Quarter on 1st January.3.The Total Maintenance Amount applicable for a quarter of any Accounting Year shall be calculated as Sum total of the Maintenance Amount of each Trainset under DLMP Obligations during the quarter where Maintenance Amount of each of the Trainset shall be calculated as below: –RSDLMPFn = 0.25 x RSDLMPFa x (RSDAM / RSDQ)Where;RSDLMPFn= Maintenance Amount applicable for each 6-car Train set for the quarter, where suffix ‘n’ is the Trainset number.RSDLMPFa = Applicable Annual Maintenance Amount of the Train for the corresponding Service Year of Maintenance.RSDAM = Train-Days under Maintenance Obligations for the corresponding Service Year of maintenance during the Quarter.RSDQ= No of Days in the relevant Quarter. COST CENTRE NO. F NOT USED COST CENTRE No. G– UNIT EXCHANGE SPARES, MANDATORY SPARES, SPECIAL TOOLS, JIGS, FIXTURES, GAUGES, TESTING AND DIAGNOSTIC EQUIPMENT This Cost Centre comprises all those obligations and activities throughout the contract connected with the provision and supply of spares, special tools, testing and diagnostic equipment This includes but is not limited to: · Supply of Unit exchange spares, Mandatory Spares · Supply of Special tools, jigs, fixtures, gauges, testing and diagnostic equipment. · Any other item considered necessary by the Contractor to comply with the Scope of Works. NOTES: 1. The costs indicated in this Cost Centre for all the Milestones 'G1', 'GA2' & 'GA5' shall be the ACTUAL COSTS and not the apportioned cost.2. It is certified that 'Annexure ITT-2B-1' annexed in Technical Package is a \\"TRUE COPY\\" (with prices blanked off) of the said 'Annexure ITT-2B-1' in the Financial Package. SIGNATURE OF TENDERER COST CENTRE 'G' : UNIT EXCHANGE SPARES, MANDATORY SPARES, SPECIAL TOOLS, JIGS, FIXTURES, GAUGES, TESTING AND DIAGNOSTIC EQUIPMENT Milestone Number WORK DESCRIPTION Foreign Currency(I) Foreign Currency(II) Foreign Currency(III) Indian Rupees Weeks from Commencement Date USD JPY EUR INR MILESTONE ACTIVITY (Column 'A') (Column 'B') (Column 'C') (Column 'D') Obtain the “Notice of No Objection” or “Notice of No Objection Subject to------“from the Engineer for the delivery of the following: G1 Unit Exchange Spares - 0.0 0.0 0.0 0.0 (Details to be given as per Annexure GA 1) G2 Mandatory Spares - 0.0 0.0 0.0 0.0 (Details to be given as per Annexure GA 2) G5 Special Tools, Jigs, Fixtures, Gauges, Testing 0.0 0.0 0.0 0.0 and Diagnostic Equipment:- (As per Chapter 8 of the Employer’s Requirement – General Specifications.) (Details to be given as per Annexure GA 5) Cost Centre TOTAL 0.0 0.0 0.0 0.0 Notes : |
| 30 | The costs indicated in this Cost Centre for all the Milestones G1, G2 and G5 shall be the actual costs and not the apportioned costs. Amount of foreign currency shall be in consonance with the actual import. |
| 31 | For Milestone G1,G2 and G5 Tenderer must furnish unit price for each item under these Milestones and shall not alter the quantities indicated under these Milestones for each item. |
| 32 | Employer at his sole discretion may exercise the option to increase/decrease the quantities (to any extent) of spares indicated under milestones G1, G2 and G5. However, the value for the option to increase/decrease the quanitities shall be within the ±15% of the Contract Price.For increased quantities, payment to the contractor shall be on the basis of actual supplies made and quoted unit rates and no escalation or any other additional sums shall be payable. Any increase/decrase in quantities may be intimated at any time during till completion of 5 years after taking over of the last trainset by Employer. The delivery schedule for the enhanced quantities shall be mutually agreed. |
| 33 | Contractor shall indicate the annual percentage escalation/deflation that will be applicable for increase or decrease of the unit cost of each item/spare listed in Annexures GA1, GA2 and GA5 for procurement by Employer for a period of upto five years after completion of five years from the date of taking over of last trainset.For avoidance of doubt, following example is provided:Say, the date of taking over of last trainset is 07-Nov-2024, then the price quoted for each item/spare listed in Annexures GA1, GA2 and GA5 shall be applicable till 06-Nov-2029 and the annual percentage escalation/deflation on the price quoted for each item/spare listed in Annexures GA1, GA2 and GA5 shall be applicable for the period from 07-Nov-2029 to 05-Nov-2034. |
| 34 | Employer may exercise the option to procure individual Spares listed in Annexures GA1, GA2 and GA5 by the Tenderer at any time within five years after completion of five years from the date of taking over of last trainset. Procurement Price in such case shall be calculated by considering the percentage of increase/decrease per annum (with minimum duration as one month) as quoted by the Contractor in Annexures GA1, GA2 and GA5.For avoidance of doubt, following example is provided:Say, the date of taking over of last trainset is 07-Nov-2024, then the price quoted for each item/spare listed in Annexures GA1, GA2 and GA5 shall remain same for the supplies instructed/ordered by Employer till 06-Nov-2029. The annual percentage escalation/deflation on the price quoted for each item/spare listed in Annexures GA1, GA2 and GA5 shall be applicable on the supplies instructed/ordered by Employer during the period from 07-Nov-2029 to 05-Nov-2034. |
| 35 | The Cost Centre 'G' (GA1, GA2 & GA5) will not be part of 'Cost Centre E' i.e. COMPREHENSIVE MAINTENANCE OF ROLLING STOCK, DEPOT AND MACHINERY & PLANTs (M&Ps) AND SPECIAL TOOLS, JIGS, FIXTURES, GAUGES, TESTING AND DIAGNOSTIC EQUIPMENT, TEST BENCHES & MATERIAL HANDLING EQUIPMENT etc. IN THE DEPOT (Clause A1.1 of ITT) FOR DLMP |
| 36 | IMPORTANT NOTE REGARDING EVALUATION OF COST QUOTED UNDER THIS COST CENTRE Wherever Tenderer do not quote for spares against milestones ‘G1’, 'G2' and ‘G5' exactly as per specified list of spares in the Tender, following methodology for loading of prices for milestones ‘G1’, 'G2' and ‘G5’ will be considered: |
| 37 | Cases where the Tenderer has quoted unit rates but the quoted quantity do not match with the specified quantity in the Tender – Unit price quoted will be considered for calculating the procurement price of the quantities specified in the Tender and this calculated price will be considered for evaluation. |
| 38 | Cases where tenderer has mentioned unit rates as 'ZERO' or '0' or '-' or 'NIL':– For all such items the prices shall be considered as '0 (Zero)' for evaluation.– Also, during actual contract execution, such items, if any, will be considered as to be supplied free of cost to the Employer. |
| 39 | Cases where tenderer has either left unit rates blank or some items have been excluded from the specified list – For all such items, the maximum prices quoted by any of the other responsive bidder for such item will be considered and added to the respective Milestone price quoted by the tenderer. This calculated price will be considered for evaluation.– However, during actual contract execution, such items, if any, will be considered as to be supplied free of cost to the Employer. |
| 40 | Cases where the tenderer has quoted for additional items (over and above the items specified in the tender):- Price of additional items quoted by the tenderer will not be considered for evaluation and such items will not form part of the contract. |
| 41 | Deleted |
| 42 | It is certified that 'Annexure ITT-2B-1' annexed in Technical Package is a \\"TRUE COPY\\" (with prices blanked off) of the said 'Annexure ITT-2B-1' in the Financial Package. |
| 43 | Deleted |
| 44 | Tenderers shall fill the 'Milestone Completion Date' (wherever not specified) against each Milestone Activity above, such that it falls within the relevant Key Dates (refer Form FT-1 to Forms of Tender). In case of non compliance to this condition, the Employer shall consider the relevant activity under the non-compliant 'Milestone Completion Date' to be completed on the respective Key Date as mentioned in the tender conditions for all purposes including tender evaluation. SIGNATURE OF TENDERER Unit Exchange Spares for 10 trainsets of '6 car' Unit Exchange Spares: Annexure - GA1 (* 'set' means as used in ' 3-car unit'** 'BogieSet' means as used in '1 bogie' ) S No. Description Unit * Qty Unit Cost Total Cost Escalation p.a (%) REMARKS F. C(I) F. C(II) F. C(III) L. C F. C(I) F. C(II) F. C(III) L. C F. C(I) F. C(II) F. C(III) L. C USD JPY EUR (INR) USD JPY EUR (INR) USD JPY EUR (INR) |
| 45 | Transformer |
| 46 | Traction Motor with Half Coupling, Power Cables & Connectors |
| 47 | Power Converter and Inverter |
| 48 | Auxiliary Converter (without battery charger) |
| 49 | On-board Battery charger |
| 50 | Vacuum Circuit Breaker |
| 51 | Complete Motor Bogie equipped with Traction Motors, Wheel Sets and brake units etc. |
| 52 | All types of Complete Trailer Bogie equipped with Wheel Sets and brake units etc. |
| 53 | Motor car wheel sets complete with drive mechanism, TBU's, axle box and bearings etc. |
| 54 | Trailer car wheel set complete with TBU's, axle box, bearing etc. |
| 55 | 25 kV cable with HV bushing and connecter. |
| 56 | Battery set with inter connectors |
| 57 | Pantograph with base insulators and its control panel |
| 58 | All Electrical monitoring, control and protection panels/cubicles comprising of relays, MCBs, switches, displays, pneumatic gauges, sensors duly wired used therein as applicable. (list to be furnished by the Bidder) |
| 59 | Coupler: Auto ( without electrical head); |
| 60 | Coupler: Semi-permanent(with muff coupling) |
| 61 | Intermediate automatic coupler(with electrical head) |
| 62 | Gangways comprising of two-halves |
| 63 | Master controller & Mode selector |
| 64 | PWM Generator with interface panel |
| 65 | Main Motor Compressor Set for pneumatic system |
| 66 | Auxiliary motor compressor set |
| 67 | Air dryer |
| 68 | Secondary suspension complete set |
| 69 | Primary suspension |
| 70 | Complete Brake Control Unit(Pneumatic) |
| 71 | Electronic Brake control unit |
| 72 | Complete PA/ PIS and CCTV set including connectors but excluding interconnecting cable. |
| 73 | Complete saloon door operating mechanism |
| 74 | Saloon Air-conditioning Unit |
| 75 | TCMS Equipment set |
| 76 | WFL (complete with fasteners including holder) |
| 77 | Surge Arrester |
| 78 | Fire detection Unit |
| 79 | Current Transformer |
| 80 | Potential Transformer |
| 81 | Stainles Steel Passenger Seat |
| 82 | Traction Motor |
| 83 | Complete Cab Door with Operating & Locking mechanism TOTAL(GA1) 0.0 0.0 0.0 0.0 Mandatory Spares for 10 trainsets of '6 car' Annexure - GA2 Mandatory Spares: (* 'Set' means as used in ' 3-car unit' ) S No. Description Part No. Unit* Qty Unit Cost Total Cost Escalation p.a (%) REMARKS F. C(I) F. C(II) F. C(III) L. C F. C(I) F. C(II) F. C(III) L. C F. C(I) F. C(II) F. C(III) L. C USD JPY EUR (INR) USD JPY EUR (INR) USD JPY EUR (INR) HVAC Unit |
| 84 | Microprocessor based control unit |
| 85 | Set of all types of Temperature sensors |
| 86 | Humidity sensor |
| 87 | Smoke sensor |
| 88 | Fresh & Return air Damper motors |
| 89 | Compressor |
| 90 | Condenser & Evaporator fans with motor |
| 91 | Emergency Inverter with control unit Brake & Pneumatics |
| 92 | Set of all types of PCB Cards as used in Brake Electronic Control Unit of each DM, T & M car |
| 93 | Set of all types of Power Module cards |
| 94 | Set of all types of Input Output Cards |
| 95 | Speed Sensor |
| 96 | Tread Brake Unit |
| 97 | Set of all types of Valves as used in Pneumatic Circuit |
| 98 | Set of all types of Magnet Valves |
| 99 | Set of all types Safety Valves |
| 100 | Set of all type of Gauges |
| 101 | Set of all type of Sensors |
| 102 | Set of all type of Pressure Switches |
| 103 | Set of all types of Pressure Governors |
| 104 | Set of all types of isolating cocks |
| 105 | Set of all types of Drain Cocks |
| 106 | All components as used in Pneumatic BCU |
| 107 | Set of all types of flexible Pneumatic Hose with end fittings PA/PIS & CCTV |
| 108 | Set of all types of PCB cards as used in PA/PIS & CCTV system |
| 109 | Set of all types of Power Module Cards |
| 110 | Set of all types of Input Output Cards |
| 111 | Train Number Indicator |
| 112 | Destination Indicator Front |
| 113 | External side display board |
| 114 | Set of MOPs,AOPs,Power Amplifiers,Speakers(Saloon internal/external) as used in PA/PIS & CCTV system |
| 115 | Passenger emergency activation device |
| 116 | Set of PSSS modules |
| 117 | Set of all types of LCD Route Maps & displays |
| 118 | Saloon Camera |
| 119 | Outside rear view camera |
| 120 | Detrainment Camera DOOR SYSTEM |
| 121 | Door control unit |
| 122 | Saloon Door Leaf (pair) |
| 123 | Door Motor including gear mechanism if any |
| 124 | Set of rollers |
| 125 | Set of all types of sensors/switches as used in saloon door |
| 126 | Cab-Saloon Partition door panels with operating & locking mechanism |
| 127 | Complete Emergency Door |
| 128 | All types of mechanical components and panels as used in one Emergency door |
| 129 | Set of all types of sensors,Relays, Contactors,Limit Switches etc. as used in one Emergency door |
| 130 | Set of all types of sensors, Relays, Contactors,Limit Switches etc. in Cab door |
| 131 | Set of all types of saloon Door Gaskets and Rubber items |
| 132 | Door Hanging device Mandatory Spares: (* 'Set' means as used in ' 3-car unit' ) S No. Description Part No. Unit* Qty Unit Cost Total Cost Escalation p.a (%) REMARKS F. C(I) F. C(II) F. C(III) L. C F. C(I) F. C(II) F. C(III) L. C F. C(I) F. C(II) F. C(III) L. C USD JPY EUR (INR) USD JPY EUR (INR) USD JPY EUR (INR) Converter/Inverter |
| 133 | Set of all types of PCB cards as used in Converter/Inverter |
| 134 | Set of all types of Power module card incl. IGBTs as used in Converter/Inverter |
| 135 | Set of all types of Input Output Cards as used in converter/Inverter |
| 136 | Set of all types of Contactors as used in converter/inverter |
| 137 | Charging contactor |
| 138 | Main contactor |
| 139 | Current Transformer |
| 140 | Potential Transformer |
| 141 | Power Unit |
| 142 | Gate Control Unit complete with back panel |
| 143 | Set of all types of components used in DC link circuit module including DC link capacitors |
| 144 | Earthing protection circuit module Traction Motor |
| 145 | Temperature Sensor Auxiliary Converter-Inverter |
| 146 | Set of all types of PCB cards as used in Aux. Converter |
| 147 | Set of all types of Power module card incl. IGBTs as used in Aux. converter |
| 148 | Set of all types of input Output Cards as used in Aux. converter |
| 149 | Set of all types of Contactors as used in Aux. converter |
| 150 | Charging contactor |
| 151 | Main contactor |
| 152 | Current Transformer |
| 153 | Potential Transformer |
| 154 | Power Unit |
| 155 | Gate Control Unit complete with back panel |
| 156 | Set of all types of components used in DC link circuit module including DC link capacitors |
| 157 | Earthing protection circuit module Transformer |
| 158 | Oil pump |
| 159 | Radiator blower including fan(if required) |
| 160 | Set of all types of Valves & Relays as used in Transformer |
| 161 | Set of all types of Sensors/Gauges as used in Transformer TCMS |
| 162 | Set of all types of PCB cards including Back Panels as used in TCMS |
| 163 | Display Unit Master Controller |
| 164 | Set of all types of Switches and contactors as used in Master Controller |
| 165 | Potentiometer Pantograph |
| 166 | Control panel and control Box including all types of valves,Switches,Regulators, Filters etc. |
| 167 | Valves used for Maximum Extension Device & Auto-Dropping Device |
| 168 | Pantograph Pan assembly |
| 169 | Pantograph Raising Cylinder |
| 170 | Air Feed Insulator |
| 171 | Pantograph foot insulator Vaccum Circuit Breaker |
| 172 | Control box including all types of valves,relays, auxiliary contact, pressure regulator,Pressure switch,sensors,gauges etc. Coupler |
| 173 | Proximity sensor |
| 174 | Set of all types of Pneumatic hoses as used in coupler |
| 175 | Set of all types of electrical jumpers with connectors including cab to cab jumpers Bogie |
| 176 | Set of all types of Dampers for one bogie |
| 177 | Traction Link Device(Monolink/Z-link) |
| 178 | Axle boxes including bearing |
| 179 | Leveling Valves |
| 180 | Spacers for Air Suspension |
| 181 | All types of lateral & longitudinal buffers as used in one Bogie Mandatory Spares: (* 'Set' means as used in ' 3-car unit' ) S No. Description Part No. Unit* Qty Unit Cost Total Cost Escalation p.a (%) REMARKS F. C(I) F. C(II) F. C(III) L. C F. C(I) F. C(II) F. C(III) L. C F. C(I) F. C(II) F. C(III) L. C USD JPY EUR (INR) USD JPY EUR (INR) USD JPY EUR (INR) Electrical items |
| 182 | Complete lights- Head light, Tail light/Marker Light, Flasher light, Console light, Gangway light, saloon light,Door Indication Light(interior/exterior),cubicle light,Passenger Alarm light,cab main light complete with sensors, controllers and fittings, housing,casing,covers etc. |
| 183 | Set of all types of DC-DC converters |
| 184 | Earthing Ground Switch |
| 185 | Lightening Arrestor Wiper |
| 186 | Set of Wiper Pump,Wiper Tank,Nozzle Miscellaneous items |
| 187 | Set of all types of hardwares - mounting, bolts, washers etc. for Converter/inverter |
| 188 | Set of all types of hardwares - mounting, bolts, washers etc. for Auxiliary converter including battery charger |
| 189 | Set of all types of hardwares - mounting, bolts, washers etc. for pneumatic Compressors |
| 190 | Set of all types of hardwares - mounting, bolts, washers etc. for Transformer |
| 191 | Set of all types of hardwares - mounting, bolts, washers etc. for all types of Air reservoirs |
| 192 | Set of all types of hardwares - mounting, bolts, washers etc. for all types of Valve boxes |
| 193 | Set of all tyes of hardwares - mounting, bolts, washers etc. for all types of Doors |
| 194 | Set of all types of hardwares - mounting, bolts, washers etc. for Air conditioning unit |
| 195 | Set of all types of hardwares - mounting, bolts, washers etc. for Traction Motor |
| 196 | Set of all types of hardwares - mounting, bolts, washers etc. for Surge Arrestor |
| 197 | Set of all types of hardwares - mounting, bolts, washers etc. for Current Transformer |
| 198 | Set of all types of hardwares - mounting, bolts, washers etc. for Potential Transformer |
| 199 | Set of all types of hardwares-mounting,bolts,washers etc. for Pantograph |
| 200 | Set of all types of hardwares-mounting,bolts,washers etc. for VCB |
| 201 | Set of all types of hardwares-mounting,bolts,washers etc. for EGS |
| 202 | Set of all types of connectors with pins of MAKE A, B….. (Tenderer to specify) |
| 203 | Set of all types of relays of MAKE A, B….. (Tenderer to specify) |
| 204 | Set of all type of pushbuttons of MAKE A, B….. (Tenderer to specify) |
| 205 | Set of all types of contactors of MAKE A, B….. (Tenderer to specify) |
| 206 | Set of all types of MCBs of MAKE A, B….. (Tenderer to specify) |
| 207 | Set of all types of indicators of MAKE A, B….. (Tenderer to specify) |
| 208 | Set of all types of fuses of MAKE A, B….. (Tenderer to specify) |
| 209 | Set of all types of air filters for pneumatic circuits |
| 210 | Set of all types of Air Filters for HVAC |
| 211 | Set of Seats in Cab |
| 212 | Set of Glasses of all types of Doors & Windows. |
| 213 | Windsheild glass |
| 214 | Draught Screen |
| 215 | Set of all types of PCBs as used in FDU |
| 216 | Driver Desk Panel (FRP) |
| 217 | FRP Panels |
| 218 | Air Duct |
| 219 | Cab Mask |
| 220 | Insulation like glass wool etc. |
| 221 | Maskon key (5 nos. per trainset) |
| 222 | Lock for Maskon Key |
| 223 | Fume Extractor for battery box |
| 224 | Mating connector for shore supply as per ERTS 9.2.10 |
| 225 | Set of cable completed with connectors at both end as per ERTS 9.2.10 TOTAL(GA2) 0.0 0.0 0.0 0.0 Annexure - GA 5 Special Tools, Jigs, Fixtures, Gauges, Testing and Diagnostic Equipment for 10 trainset of '6 car' ` (A) MANDATORY SPECIAL TOOLS , JIGS ,FIXTURES, GAUGES, TESTING AND DIAGNOSTIC EQUIPMENT ('Set' means numbers of complete special Tools/Jigs/Fixtures/Gauges/Testing & Diagnostic Equipment) S No. Sub No. SYSTEM EQUIPMENT Part No. Unit Qty Unit Cost Total Cost Escalation p.a (%) REMARKS F. C(I) F. C(II) F. C(III) L. C F. C(I) F. C(II) F. C(III) L. C F. C(I) F. C(II) F. C(III) L. C USD JPY EUR (INR) USD JPY EUR (INR) USD JPY EUR (INR) |
| 226 | 1.1 1.2 Assembly, Dis-assembly, Alignment, Testing & Repair jigs and fixtures, Tools required for Overhauling etc. Set 1.0 0.0 0.0 0.0 0.0 |
| 227 | 2.1 2.2 Assembly, Dis-assembly, Testing & repair jigsand Fixtures, Tools required for Overhauling , Working stand etc. Set 1.0 0.0 0.0 0.0 0.0 |
| 228 | 3.1 3.2 BDV tester for Transfromer oil Set 1.0 0.0 0.0 0.0 0.0 3.3 Suitable oil filling equipment, complete with oil filteration,centrifuging, oil testing and other accessories for main transformer as per ERTS 8.7.15. Set 1.0 0.0 0.0 0.0 0.0 |
| 229 | 4.1 4.2 In house preventive and breakdown maintenance equipment (tools, jigs/fixtures/hardware& software/test bench etc) of CI as per 8.9.16 Set 1.0 0.0 0.0 0.0 0.0 4.3 Test equipment as per clause 8.9.12(i). Set 1.0 0.0 0.0 0.0 0.0 4.4 Facility to monitor the events of propulsion system on-line on a maintenance terminal as per ERTS 8.9.14 Set 1.0 0.0 0.0 0.0 0.0 |
| 230 | 5.1 5.2 In-situ and disassembled traction motor cleaning arrangement/fixture to suck the dust from the rotor and stator including filter through an external industrial blower/vacuum cleaner(To be supplied by the Employer)in accordance with ERTS clause 8.10.13,8.10.14 and 8.10.16) Set 2.0 0.0 0.0 0.0 0.0 |
| 231 | 7.1 7.2 Maintenance Terminal to monitor and record the events online as per ERTS 9.2.8(x) nos 2.0 0.0 0.0 0.0 0.0 7.3 In house Preventive and Breakdown maintenance equipment (tools, jigs/fixtures/hardware & software/testbench etc.) of Auxiliary Inverter . Set 1.0 0.0 0.0 0.0 0.0 |
| 232 | 8.1 8.2 Universal Test bench(UTB) with computer, Printer, Software,UPS and all other accessories. Set 1.0 0.0 0.0 0.0 0.0 8.3 Tread Brake Unit test bench & repair tools. Set 1.0 0.0 0.0 0.0 0.0 8.4 Supply of any special tools complete with requisite Hardware/Software as per ERTS clause 6.17.6 & 6.17.7 Set 2.0 0.0 0.0 0.0 0.0 8.5 Special Tool for accessing manual parking brake release arrangement at platform level (2 sets/Train ) as per ERTS clause 6.15.4 Nos 20.0 0.0 0.0 0.0 0.0 |
| 233 | 9.1 9.2 Assembly and Disassembly tools as recommended by OEM Set 1.0 0.0 0.0 0.0 0.0 9.3 Go gauge/No go gauge for end screw as recommended by OEM Set 1.0 0.0 0.0 0.0 0.0 |
| 234 | 10.1 10.2 Equipment and means for downloading of visual images recorded in non-volatile SSD memory of CCTV alongwith all connecting cables as per ERTS 13.9.11. Set 2.0 0.0 0.0 0.0 0.0 10.3 Card Extender for all types of electronics cards Set 1.0 0.0 0.0 0.0 0.0 |
| 235 | 12.1 12.2 Lifting jig including any mechanical handling equipment as per ERTS 11.4.3 Set 2.0 0.0 0.0 0.0 0.0 12.3 Oilless refrigerant charging /reclaiming unit including vacuum pump, suction equipment, leakage detector etc. Set 1.0 0.0 0.0 0.0 0.0 12.4 Complete Set of Automatic Filter Cleaning Machine as per ERTS Set 2.0 0.0 0.0 0.0 0.0 12.5 VAC duct cleaning tool as per ERTS 11.5.3 Set 1.0 0.0 0.0 0.0 0.0 |
| 236 | 13.1 13.2 Force detection gauge,suction tool as recommended by OEM Set 4.0 0.0 0.0 0.0 0.0 13.3 Door handling unit,Door control box for local operations,alignment tools as recommended by OEM Set 1.0 0.0 0.0 0.0 0.0 13.4 Complete set of maintenance and diagnostic tools including software and hardware as per ERTS 7.2.7 Set 2.0 0.0 0.0 0.0 0.0 13.5 Complete set of Special tools for cleaning of the door guides as per ERTS 7.2.1 (xii) as recommended by OEM Set 2.0 0.0 0.0 0.0 0.0 13.6 Backlash Gauge for spindle as recommended by OEM Set 1.0 0.0 0.0 0.0 0.0 |
| 237 | 14.1 14.2 Mounting/dismounting tools/jig as recommended by OEM Set 1.0 0.0 0.0 0.0 0.0 14.3 Coupler Proximity sensor functionality & gap measuring tools as recommended by OEM Set 1.0 0.0 0.0 0.0 0.0 |
| 238 | 15.1 15.2 WFL System Programming tool for spray cycle of WFL System as per ERTS 5.14.2 Set 2.0 0.0 0.0 0.0 0.0 15.3 WFL nozzle alignment tool as per ERTS 5.14.2 Set 2.0 0.0 0.0 0.0 0.0 Special Tools, Jigs, Fixtures, Gauges, Testing and Diagnostic Equipment for 10 trainset of '6 car' ` (A) MANDATORY SPECIAL TOOLS , JIGS ,FIXTURES, GAUGES, TESTING AND DIAGNOSTIC EQUIPMENT S No. Sub No. SYSTEM EQUIPMENT Part No. Unit Qty Unit Cost Total Cost Escalation p.a (%) REMARKS F. C(I) F. C(II) F. C(III) L. C F. C(I) F. C(II) F. C(III) L. C F. C(I) F. C(II) F. C(III) L. C USD JPY EUR (INR) USD JPY EUR (INR) USD JPY EUR (INR) |
| 239 | 16.1 16.2 Wheel Profile gauge as per ERTS 5.11.5 Set 1.0 |
| 240 | 17.1 17.2 Dampers Damper Testing machine as recommended by OEM Set 1.0 0.0 0.0 0.0 0.0 |
| 241 | 19.1 19.2 Gangway handling trolley Set 1.0 0.0 0.0 0.0 0.0 19.3 Gangway covers to protect interior of uncoupled train as per ERTS 4.15.1(vii) Set 6.0 0.0 0.0 0.0 0.0 19.4 Gangway work Table Set 1.0 0.0 0.0 0.0 0.0 |
| 242 | 20.1 20.2 Signal list modification tool as per ERTS 10.3.4 Set 1.0 0.0 0.0 0.0 0.0 20.3 Notebook Computers as approved by the Project Manager, together with all associated accessories and pre-installed software as per ERTS clause 10.9.11)Notebook computers together with all associated accessories and pre-installed software necessary for all diagnostic and configuration editing functions for all train-borne equipment2) copies of all the software uploaded in the notebook computers shall also be provided separately in approved non-volatile memory. Set 10.0 0.0 0.0 0.0 0.0 20.4 Remote data downloading server including backup (Hardware &software, On board Equipment) as per ERTS 10.11.2(i) &(ii) Set 1.0 0.0 0.0 0.0 0.0 20.5 Tools required for reading and processing of recorded data log files as per clause 10.10.7 Set 1.0 0.0 0.0 0.0 0.0 20.6 Card Extender for all types of electronics cards Set 1.0 0.0 0.0 0.0 0.0 |
| 243 | 22.1 22.2 One complete set of software(s) package and associated hardware as per Clause 3.22.9 Set 1.0 0.0 0.0 0.0 0.0 |
| 244 | 23.1 23.2 Facility for replacement of power LED clusters used as head and tail lights as per ERTS 12.8.2 (i) Set 2.0 0.0 0.0 0.0 0.0 23.3 Special tool for replacement of defective LEDs/ block of LEDs as per ERTS 12.9.1 (x) Set 2.0 0.0 0.0 0.0 0.0 |
| 245 | 24.1 TOTAL GA5 (A) 0.0 0.0 0.0 0.0 NOTE:1. Delivery of the items listed in Annexure'GA5' shall be a prerequisite for accomplishment of the KD 6.1 .However, exemption for Key Date delivery of certain items may be granted to the Contractor subjected to approval of the Engineer. SIGNATURE OF TENDERER COST CENTRE No. H – TRAINING AND MANUALS This Cost Centre comprises: 1. All those obligations and activities throughout the Contract associated with training of Employer's operating and maintenance personnel. This includes but is not limited to: ♦ Deputation of Instructors by the Contractors for training of the deputed operating and maintenance personnel of the Employer in India. ♦ Training of operating and maintenance personnel of the HMRL at the Contractor’s facilities. ♦ Furnishing of Training Manual and connected Materials. ♦ Any other item considered necessary by the Contractor to comply with the Scope of Works. Notes: 1.0 The Bidder shall not complete the column “Weeks for completion of Milestone from commencement date” for the Milestone Activities 'H1' to 'H5'.The dates of operation of these Milestone Activities will be at the discretion of the Employer. 2.0 Deleted 3.0 The travel, boarding and lodging expenses for the Project Owner's trainees sent overseas will be borne by the Project Owner. 2. All those obligations and activities throughout the Contract associated with the provision of Manuals. This includes but is not limited to: ♦ Provision of Operating Manuals (Hard copies and in Electronic format). ♦ Provision of Maintenance Manuals (Hard copies and in Electronic format). ♦ Provision of Spare parts Catalogue (Hard copies and in Electronic format). ♦ Any other item considered necessary by the Contractor to comply with the Scope of Works. Note: 1. Amount quoted in this Cost Centre shall be the actual cost and not the apportioned cost.2. It is certified that 'Annexure ITT-2B-1' annexed in Technical Package is a \\"True Copy\\" (with prices blanked off) of the said 'Annexure ITT-2B-1' in the Financial Package. SIGNATURE OF BIDDER COST CENTRE No. H – TRAINING AND MANUALS MILESTONE NUMBER WORK DESCRIPTION ACTUAL AMOUNT MILESTONE COMPLETION DATE ( IN WEEKS FROM COMMENCMENT DATE) FOREIGN CURRENCY(I) FOREIGN CURRENCY(II) FOREIGN CURRENCY(III) INDIAN RUPEES USD JPY EUR INR MILESTONE ACTIVITY COLUMN A COLUMN B COLUMN C COLUMN D Obtain the “Notice of No Objection” or “Notice of No Objection Subject to------“from the Project Manager for the completion of all training including delivery of final training manuals for the following: H1 Training of HMRL's Driving Instructors and Drivers (1 man month) in operation of MRTS off-shore. 128.0 H2 Training of HMRL's maintenance personnel (5 man months) in Contractor’s / Sub Contractor's Works and MRTS Offshore. H3 Provision of Contractor’s Driving Instructors (2 man months) for Training of HMRL's operating personnel in India. H4 Provision of Contractor’s Instructors or OEM's Experts (12 man month) for Training of HMRL's maintenance personnel in India. H5 Submission of Training Manuals (Original plus three hard Copies) and in Electronic format. Obtain the “Notice of No Objection” or “Notice of No Objection Subject to---“ from the Project Manager on delivery of the following final Manuals: H6 Operating Manual (Original plus 3 Hard copies). H7 Operating Manual in Electronic format. H8 Maintenance Manual (Original plus 3 Hard copies). H9 Maintenance Manual in Electronic format. H10 Spare parts Catalogue (Original plus 3 Hard copies). H11 Spare parts Catalogue in Electronic format. Obtain the “Notice of No Objection” or “Notice of No Objection Subject to---“ from the Project Manager for completion of the following: H12 Any other item considered necessary by the Contractor to comply with the scope of works COST CENTRE TOTAL 0.0 0.0 0.0 0.0 Notes: |
| 246 | The Tenderer shall not complete the column “Weeks for completion of Milestone from commencement date” for Milestones H1 to H5 and H12. |
| 247 | The dates of operation of the Milestone Activities for Milestones H1 to H5 and H12 will be at the discretion of the HMRL. |
| 248 | The completion of Milestone 'H6' to 'H11' shall be considered as a pre-requisite for accomplishment of Key Date '6.4'. |
| 249 | Deleted |
| 250 | The travel, boarding and lodging expenses for the Project Owner’s trainees sent overseas will be borne by the Project Owner. |
| 251 | Amount quoted in this Cost Centre shall be ACTUAL COST and not apportioned cost. |
| 252 | It is certified that 'Annexure ITT-2B-1' annexed in Technical Package is a \\"TRUE COPY\\" (with prices blanked off) of the said 'Annexure ITT-2B-1' in the Financial Package. |
| 253 | Tenderers shall fill the 'Milestone Completion Date' (wherever not specified) against each Milestone Activity above, such that it falls within the relevant Key Dates (refer Form FT-1 to Forms of Tender). In case of non compliance to this condition, the Employer shall consider the relevant activity under the non-compliant 'Milestone Completion Date' to be completed on the respective Key Date as mentioned in the tender conditions for all purposes including tender evaluation. SIGNATURE OF BIDDER Annexure ITT-2B-2 MILESTONE PAYMENT SCHEDULESHOWING MONTHLY CASHFLOWS FOR THE CONTRACTDELETED Annexure ITT-2B-3 PRICING OF UNQUALIFIED WITHDRAWAL OF CONDITIONS, QUALIFICATIONS, DEVIATIONS ETC. SUBMITTED IN APPENDIX FT-11 ('A', 'B' and 'C') TO FORM OF TENDER Item Condition, Qualification, Deviation etc. Key date affected by each condition, qualification, deviation etc. Increase or Decrease for unqualified withdrawal of each conditions, qualification, deviation etc. (excluding 'Taxes & Duties' ) Cost Centre Milestone No. F.C. (I) F.C. (II) F.C. (III) L.C. USD JPY EUR (INR) A B C D E F G H I TOTAL 0.0 0.0 0.0 0.0 Notes: |
| 254 | In this Appendix, the Tenderer shall indicate every key date that will be affected by each remark, comment, condition, qualifications or deviation, etc. that has been specified in Appendix FT-11 ('A', 'B' and 'C'). |
| 255 | Prices for unqualified withdrawal of each remark, comment, condition, qualifications or deviation, etc. that has been specified in Appendix FT-11 ('A', 'B' and 'C') shall be quoted in this Annexure ITT-2B-3 ,clearly indicating the Cost Centre and Milestone No. to which it will be allocated. In case the tenderer does not indicate the Cost Centre and Milestone No., DMRC will allocate the quoted price for withdrawal to the last Milestone under Cost Centre 'D', which will be considered for amounts payable as per Milestone Payment Schedule. The 'Lump Sum Price' quoted by the Tenderer in 'TENDER TOTAL LUMPSUM PRICE' Page shall not include the Price for withdrawal of remark, comment, condition, qualifications or deviation etc quoted in this 'Annexure ITT-2B-3' |
| 256 | In case price for unqualified withdrawal of any remark, comment, condition, qualification or deviation etc. indicated in Appendix FT-11 ('A', 'B' and 'C') is not quoted in Annexure ITT-2B-3, it shall be considered that the remark, comment, condition, qualification or deviation is unconditionally withdrawn without any financial implication. However, Employer at its sole discretion and option may assess the financial implication of the said remark, comment, condition, qualification or deviation etc. based on best engineering principles and concepts, which shall be binding on the tenderer, and the same may be considered by Employer for financial evaluation. |
| 257 | It is certified that 'Annexure ITT-2B-3' annexed in Technical Package as a \\"TRUE COPY\\" (with prices blanked off) of the said 'Annexure ITT-2B-3' in the Financial Package.” SIGNATURE OF TENDERER Annexure - ITT-2B4 Certification of the local content according to clause E5.5.4 of Instructions to Tenderers i.e. the total value of the item procured (excluding net domestic indirect taxes) minus the value of the imported content in the item (including all customs duties) as a proportion of the total value, in percent to be submitted by the tenderer S. no. Description Value in INR(Crores) |
| 258 | Tender Total Lumpsum Price |
| 259 | Total imported content |
| 260 | Basic Custom duty etc. (i.e. duties not eligible for availing input credits) |
| 261 | other custom duties (i.e. duties eligible for availing input credits) |
| 262 | Total imported content incl. taxes (s.no.2+s.no.3+s.no.4) |
| 263 | %Local content = (s. no.1 - s. no. 5)/(s. no.1)*100 Notes: |
| 264 | Values at S.No. 1 to 5 shall be in INR Crores and value at S.No. 6 shall be in percentage. |
| 265 | This Annexure-ITT-2B-4 shall be uploaded by the bidder after calculation(as above) as a part of ITT-2B(as a part of Financial Package) to ascertain the % Local Content. Examples: Case 1: S. no. Description Value in INR (crores) Tax assumptions |
| 266 | Tender Total Price |
| 267 | Total imported content |
| 268 | Basic Custom duty etc. (i.e. duties not eligible for availing input credits) |
| 269 | other custom duties (i.e. duties eligible for availing input credits) |
| 270 | Total imported content incl. taxes |
| 271 | %Local content = (s. no.1 - s. no. 5)/(s. no.1)*100 Case 2: S. no. Description Value in INR (crores) Tax assumptions |
| 272 | Tender Total Price |
| 273 | Total imported content |
| 274 | Basic Custom duty etc. (i.e. duties not eligible for availing input credits) |
| 275 | other custom duties (i.e. duties eligible for availing input credits) |
| 276 | Total imported content incl. taxes |
| 277 | %Local content = (s. no.1 - s. no. 5)/(s. no.1)*100 Case 3 : S. no. Description Value in INR (crores) Tax assumptions |
| 278 | Tender Total Price |
| 279 | Total imported content |
| 280 | Basic Custom duty etc. (i.e. duties not eligible for availing input credits) |
| 281 | other custom duties (i.e. duties eligible for availing input credits) |
| 282 | Total imported content incl. taxes |
| 283 | %Local content = (s. no.1 - s. no. 5)/(s. no.1)*100 NOTE: - |
| 284 | Here only Case 1 is eligible for availing purchase preference where as Case 2 & 3 are not eligible for availing the purchase preference benefits. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 55 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 56 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender