Tender For R&M Of Township (Renovation Of Public Buildings In Bhel Township, Haridwar)
Tender Value
Ref. Documents
Estimated cost
Bid Submission
03 Nov 2026
1 days left
EMD
59880
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Haridwar → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for R&M Of Township (Renovation Of Public Buildings In Bhel Township, Haridwar)
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 28-Oct-2026 | DATE EXTENSION | Date | 03-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Carriage of materials by mechanical transport including loading, unloading and stacking: Lime, moorum, building rubbish, earth, manure or sludge and excavated rocks:: Lime, moorum, building rubbish:1 km (1.1.1/62) |
| 2 | Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - All work up to plinthlevel : 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size) |
| 3 | Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - All work up to plinthlevel : 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) |
| 4 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). Unit:cum( S.l.No. : 5.3) Page No.: 96 |
| 5 | Centring and shuttering including strutting, propping etc. and removal of form for:removal of form for: :Weather shade, Chajjas, corbels etc., including edges Unit:sqm (5.9.5/97) |
| 6 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete . :Cold twisted bars ( S.l.No. : 5.22.3) Page No.: 99 |
| 7 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 8 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.: Granite of any colour and shade:Area of slab upto 0.50 sqm Unit:sqm ( S.l.No. : 8.2.2.1 ) Page No.: 128 |
| 9 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.:Granite work Unit:metre ( S.l.No. : 8.3.2 ) Page No.: 128 |
| 10 | Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. Unit:metre ( S.l.No. : 8.4) Page No.: 128) |
| 11 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. Unit:each ( S.l.No. : 8.5) Page No.: 128 |
| 12 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Unit:sqm ( S.l.No. : 11.36) Page No.: 192 |
| 13 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete. Unit:sqm ( S.l.No. : 11.40) Page No.: 193 |
| 14 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).:Size of Tile 600x600 mm Unit:sqm( S.l.No. : 11.47.2 ) Page No.: 194 |
| 15 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.:Size of Tile 1000x1000 mm Unit:sqm ( S.l.No. : 11.48.4 ) Page No.: 194 |
| 16 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622 , of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm(DSR -2012, S.I.11.49.2/194) |
| 17 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622 , of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).:Size of Tile 1000x1000 mm Unit:sqm( S.l.No. : 11.49.4 ) Page No.: 194 |
| 18 | Providing gola 75 x75mm in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : :In 75x75mm deep chase.( S.l.No. : 12.21.1)/207) |
| 19 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. ( S.l.No. : 12.22/ 207) |
| 20 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.:110 mm diameter ( S.l.No. : 12.41.2 ) Page No.: 210 |
| 21 | Providing and fixing on wall face unplasticised - PVC 110 mm Coupler moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conformingto IS : 13592 Type A, including jointing with seal ring conforming toIS : 5382, leaving 10 mm gap for thermal expansion.(12.42.1.2/210) |
| 22 | Providing and fixing on wall face unplasticised - PVC Bend 87.5°,110 mm moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conformingto IS : 13592 Type A, including jointing with seal ring conforming toIS : 5382, leaving 10 mm gap for thermal expansion.(12.42.5.2/210) |
| 23 | Providing and fixing on wall face unplasticised - Shoe (Plain)°,110 mm SHOE moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conformingto IS : 13592 Type A, including jointing with seal ring conforming toIS : 5382, leaving 10 mm gap for thermal expansion.(12.42.6.2/210) |
| 24 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length,including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110mm (12.43.2) |
| 25 | 12 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand)(Sl. No. 13.1.2/222) |
| 26 | 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand)(Sl. No. 13.2.2/222) |
| 27 | 6mm cement plaster to ceiling of mix:1:3 (1 cement : 3 fine sand).(S.I. No. 13.16.1/223) 1:3 (1 cement : 3 fine sand) |
| 28 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead:With cement mortar 1:4 (1 cement : 4 fine sand) with cement mortar 1:4 (1 Cement : 4 fine sand)( S.l.No. : 14.1.1) Page No.: 237) |
| 29 | Demolishing cement concrete manually/ by mechanical meansincluding disposal of material within 50 metres lead as per directionof Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) cum |
| 30 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.(Sl. No. 15.3/248) |
| 31 | Demolishing brick work manually/ by mechanical means includingstacking of serviceable material and disposal of unserviceablematerial within 50 metres lead as per direction of Engineer-in-charge. 15.7.4 In cement mortar cum 566.60 |
| 32 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. :For thickness of tiles 10 mm to 25 mm Unit:Sqm( S.l.No. : 15.23.1) Page No.: 250 |
| 33 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (S.I.No. 15.56/253. |
| 34 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device(handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : :White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. Unit:Each ( S.l.No. : 17.1.1) Page No.: 287 |
| 35 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid .as per direction of Engineer in Charge :(17.2.1/287) |
| 36 | Providing and fixing single equal plain invert branch of required degree: :Single half stall urinal with 5 litre P.V.C. automatic flushing cistern. Unit:Each( S.l.No. : 17.5.1) Page No.: 288 |
| 37 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : :White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap. Unit:Each( S.l.No. : 17.7.7) Page No.: 288 |
| 38 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. Unit:Each ( S.l.No. : 17.8) Page No.: 289 |
| 39 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Unit:Each ( S.l.No. : 17.31) Page No.: 291 |
| 40 | Providing and fixing single unequal plain invert branch of required degree : : 100x100x75 mm :Sand cast iron S&S as per IS - 1729 Unit:Each ( S.l.No. : 17.52.1.1) Page No.: 294 |
| 41 | Providing and fixing collar: : 100 mm :Sand cast iron S&S as per IS - 1729 Unit:Each( S.l.No. : 17.57.1.1) Page No.: 295 |
| 42 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet :Sand Cast Iron S&S as per IS: 1729. Unit:Each ( S.l.No. : 17.60.1.2) Page No.: 296 |
| 43 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 75 mm outlet :Sand Cast Iron S&S as per IS- 1729. Unit:Each ( S.l.No. : 17.60.2.2) Page No.: 296 |
| 44 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. :450MM long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than170gms. Unit:Each( S.l.No. : 17.73.1) Page No.: 297 |
| 45 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms.(SI 17.74/297) |
| 46 | Providing and fixing15 mm nominal outer dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clampsat 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.( 18.8.1/313) |
| 47 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold-water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. :20 mm nominal outer dia .Pipes. Unit:m ( S.l.No. : 18.8.2) Page No.: 313 |
| 48 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. :External work :15 mm nominal outer dia .Pipes. Unit:m( S.l.No. : 18.9.1) Page No.: 313 |
| 49 | Providing and fixing 20 mm nominal outer dia PipesChlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPV Cplain & brass threaded fittings This includes jointing of pipes & fittingswith one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.External work(18.9.2/313)) |
| 50 | Providing and fixing 20 mm nominal bore ball valve (brass) of approved quality, High or lowpressure, with plastic floats completeas as per direction of Engineer in Charge :(18.18.2/315) |
| 51 | Providing and fixing uplasticised PVC connection pipe with brass unions : : 45 cm length :15 mm nominal bore Unit:No. 18.21.2.1 |
| 52 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay. (DSR-2012, S.I. No. 18.32.1/318) |
| 53 | Grading roof for water proofing treatment with 1:2:4(S.I.No. 22.14.1/366). |
| 54 | Cleaning and uprooting of trees root, grass, brush , and saplings of girth upto 30 cm measured at a height of 1.5 m all types non residential buildings roof slab / chhjas,up to above plinth level upto floor v level, and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. all required T&P and safety equipment, safety belt etc. required for proper completion of the work as per the direction of Engineer I/c . |
| 55 | Providing and fixing powder coated aluminium door / window shutters made with 3 mm thick aluminium composite sheets, including providing and fixing all the fittings like hinges / pivots, epdm rubber / neoprene gasket, all complete as per requirement and direction of engineer-in-charge. |
| 56 | Water proofing work: Preparation of surface by cleaning and scrapping, repairing the roof with cement mixed with water-proofing material, laying fibre mesh with polymer based primer and applying minimum two coats of acryclic water proofing compound of approved brand, all complete as per requirement and direction of Engineer-In-Charge. (All the materials, labour and T&P required to complete the work are to be arranged by the contactor.) |
| 57 | Supplying and fixing 2 mm thick homogeneous polyvinyl cholorodesheet/tole in flooringand skirting in approved pattern on a smooth and damp proof base using rubber based adhesives of approved quality and manufacturer like dunlop S-758, FevicolSR-998 or equivalant including rolling with light wooden roller weighing about 5 kg . All T & P required to complete the work as per dorection of Engineer in charge in approved colour and shade. |
| 58 | Providing, fabricating, supplying, and fixing/replacing existing worn-out door, window, and ventilator chaukhats with new chaukhats fabricated from M.S. pipe/M.S. sheet/ M.S. angle, suitable for single-leaf or double-leaf shutters, including cutting, welding, grinding, proper alignment, anchoring, necessary fittings, application of one coat of steel primer and two coats of synthetic enamel paint, and all materials, labour, tools, transportation, and finishing required to complete the work in all respects, as directed by the Engineer-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 03, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender