Tender For Provision Of False Ceiling To Building No W-22 And Addition / Alteration To Roof Sheet Of W-19 Sluy Shed At Ge (I) (Cg) Ratnagiri
Tender Value
3.90 Lakhs
Estimated cost
Bid Submission
06 Nov 2026
20 days left
EMD
7800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ratnagiri → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of False Ceiling To Building No W-22 And Addition / Alteration To Roof Sheet Of W-19 Sluy Shed At Ge (I) (Cg) Ratnagiri
BOQ
| Sl. No. | Item Description |
| 1 | Supply and Fixing of GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approximately 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2 meters length) of 0.55mm thickness having knurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre, complete all as specified and as directed. |
| 2 | Supply and Fixing of Hangers 6mm dia Gl (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of Gl flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and directed. |
| 3 | Supply and Fixing of PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Aluminum /GI/MS as per specification and drawing but without relevant PVC insulation panel complete all as specified and directed. |
| 4 | Supply and Fixing of solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 5 | Demolition of brickwork, laterite stone, boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed, stonework and precast concrete articles complete all as specified and directed. |
| 6 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 7 | Dismantling plain or corrugated steel sheeting any gauge thickness including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 8 | Material and Labour for machine cut laterite stone masonry wall of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 complete all as specified and as directed. |
| 9 | Material and Labour for rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing finished fair and even complete all as specified and as directed. |
| 10 | Material and Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10sqm over new surfaces, complete all as specified and as directed. |
| 11 | Supply and Fixing of rolled mild steel of Fe 410-W (Grade E- 250) quality-A as in roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed. |
| 12 | Supply and Fixing of rolled mild steel of Fe 410-W (Grade E- 250) quality-A as in plates (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed. |
| 13 | Supply and Fixing of framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Grade-E-165 complete all as specified and as directed. |
| 14 | Material and Labour for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on surfaces of any description, over 10cm in width or girth, not otherwise described complete all as specified and as directed. |
| 15 | Supply and Fixing of Pre painted galuvalume aluminum zinc coating Gl based corrugated sheet 0.5mm thick of and colour having tensile strength of 550Mpa as in roof covering/cladding to wall with self-tapping screws complete all as specified and as directed. |
| 16 | Supply and Fixing of Pre painted galuvalume aluminum zinc coating Gl based Plain steel sheet 0.5mm thick of and colour having tensile strength of 550Mpa as in roof covering/cladding to wall with self-tapping screws complete all as specified and as directed. |
| 17 | Material and Labour for 1.25mm thick Plain, black, mild steel sheeting in ridges, hips valley gutters, drip and straight flashing (length and girth as fixed complete all as specified and as directed. |
| 18 | Taking down carefully copper/aluminum point wiring complete (light, fan, plug point & power complete along with fittings (switches, ceiling roses, tube light fittings, bulk head fitting regulator, sockets main switches, DB removing materials) to store and making good to disturb surfaces of wall/floors etc complete all as specified and directed. |
| 19 | Taking down carefully Ceiling fan including dismantling blades and removing materials and deposited to MES store for keeping in safe custody for re-fixing after completion of B/R nature work complete all as specified and directed. |
| 20 | Hanging only Ceiling Fan and connecting up including connecting of cable from ceiling rose to Ceiling Fan complete all as specified and directed. |
| 21 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 Volts, 1400mm sweep minimum air delivery 245 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) all as specified and directed. |
| 22 | Material and Labour for point wiring for One light or fan point controlled by one, one way switch with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC concealed conduit (ISI marked) of adequate size and its accessories with sunk cast iron/pressed steel terminal boxes of size 1.2mm thick, with modular cover plate with frame of adequate required modules for one light or one fan point controlled by one switch including 1.5 Sqmm (nominal area) copper conductor cable (multistranded), FRLS type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metallic bodies of luminaires/ fan at other end complete all as specified and directed for the following:- Note:- Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc. |
| 23 | Same as per serial item no 22 but for One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire. |
| 24 | Supply and fixing of switch modular type 6 Amps one way, 1 module, AC 230 Volts, shrouded terminal, ISI marked complete all as specified and directed. |
| 25 | Supply and fixing of modular type socket 6 Amps 3 pin round socket with child safety shutter (ISI marked), AC 230 Volts, shrouded terminals, smooth plug removal and insertion complete all as specified and directed. |
| 26 | Supply and fixing in replacement LED recess slim light round recess mounted LED Down light made from cast aluminum housing and opaque polymer diffuser for optimum light output. 15 Watts, complete with all accessories pre-wired and connecting with three-core flexible twisted copper conductor cable with suitable size complete all as specified and directed. Note: Rate include cutting the celling surface and fixing light. |
| 27 | Supply and fixing of sub main wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 2.5 Sqmm drawn through in existing surface/recessed steel/PVC conduct and 2.5 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. |
| 28 | Amount of credit schedule shall be deducted to arrive the contract Sum Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender