Tender For Addn/Altn To 121 Annexe Bldg In Helicopter Unit Inside Airport Area And Provn Of Changing Room Near Msg, External Services To Watch Tower Rr-3 At Af Stn Mumbai Under Ge (Af)Thane.
Tender Value
15.59 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
7 days left
EMD
31180
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thane → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn/Altn To 121 Annexe Bldg In Helicopter Unit Inside Airport Area And Provn Of Changing Room Near Msg, External Services To Watch Tower Rr-3 At Af Stn Mumbai Under Ge (Af)Thane.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness (below or above ground level) and removing debris outside MoD land complete all as specified and as directed by Engineer-in-charge. |
| 2 | M&L for 25 mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in floor complete all as specified and as directed by Engineer-in-charge. |
| 3 | M&L for Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, as in floors & skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with CM 1:6 complete all as specified and as directed by Engineer-in-charge. |
| 4 | M & L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engineer-in-charge. |
| 5 | M&L brick work with sub class ‘B’ bricks straight of curved on plan exc 6m mean radius built in in CM 1:6 complete all as specified and as directed by Engineer-in-charge. |
| 6 | M&L for Brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and as directed by Engineer-in-charge. |
| 7 | Taking down cement plaster on brick or stone walls,ceiling etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed by Engineer-in-charge. |
| 8 | M&L for 10 mm thick cement plaster on Brick or concrete surfaces in CM 1:6 complete all as specified and as directed by Engineer-in-charge. |
| 9 | M&L for 15 mm thick cement plaster on stone or concrete surfaces in CM 1:4 mixed with water proofing compound @ 200ml by weight of cement including 10m height steel scaffolding complete all as specified and as directed by Engineer-in-charge. [Note:- WPC shall be measured and paid separately ] |
| 10 | Supply of liquid water proofing compound complete all as specified and as directed by Engineer-in-charge. |
| 11 | M&L for Preparing new plastered surfaces of wall, priming plastered and other surfaces with alkali resistant priming paint, and applying two coat of oil emulsion distemper including 3mm wall care putty on wall under coats of distemper complete all as specified and as directed by Engineer-in-charge. |
| 12 | M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 Litres/10sqm over and including priming coat of exterior primer applied @ 0.90 Ltr / 10sqm over new surfaces complete all as specified and as directed by Engineer-in-charge. |
| 13 | M&L Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows,ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight,mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling,Aluminium composite panel,C.P. brass/ stainless steel screws complete all as specified and as directed by Engineer-in-charge. |
| 14 | S & F 5.5 mm thick sheet glass ordinary quality area exc 0.50 Sqm in each pane and glazing for aluminum frame work complete all as specified and as directed by Engineer-in-charge. |
| 15 | S & F 3 mm thick Figure glass/ tinted glass ordinary quality and glazing with oil putty/wooden lapping in square not exc 0.58 Sqm each in each pane, lovers etc complete all as specified and as directed by Engineer-in-charge. |
| 16 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-charge. |
| 17 | Neoprene/ EPDM rubber gasket for aluminium frame for windows, Ventilators etc complete all as specified and as directed by Engineer-in-charge. |
| 18 | M&L for Anodised aluminium snap grid frame work of size (605mmx605mm ) for false ceiling incliding for hangers 6mm dia. G.I. (upto 1200 mm length) size of grid (605mmx605mm ) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I.Flat 40x3 mm size 60 mm long and expansion hold fastners 12.50mm dia. 40mm long complete all as specified and as directed by Engineer-in-charge. |
| 19 | S&F 5mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. complete all as specified and as directed by Engineer-in-charge. |
| 20 | S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of wall fixing on to wall to make PVC Frame complete all as specified and as directed by Engineer-in-charge. |
| 21 | S & F for Steel work in tubular trusses and similar works including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240,etc for ornamental and intricate design complete all as specified and as directed by Engineer-in-charge. (for Height of building max 20m) |
| 22 | S & F for Plates (plain ) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted,bolted or welded attachment, Fe 410-W (Gde-E-250) quality-A,flat iron, etc with ornamental and intricate design complete all as specified and as directed by Engineer-in-charge. |
| 23 | M&L Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard / dense soil complete all as specified and directed by engineer in charge. |
| 24 | M & L Cement concrete in foundations, filling and mass-concrete type D2 1:4:8 (40 mm graded aggregate) complete all as specified and directed by engineer in charge. |
| 25 | M&L Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement Mortar 1:4 complete all as specified and directed by engineer in charge. |
| 26 | M&L Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work complete all as specified and directed by engineer in charge. |
| 27 | M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed by engineer in charge. |
| 28 | M&L Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed by engineer in charge. |
| 29 | M&L Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes complete all as specified and directed by engineer in charge. |
| 30 | M&L Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by engineer in charge. |
| 31 | M&L for rendering 10mm thick in CM 1:3 as backing coat on wall surface incl preparation of surfaces to receive dado finished complete all as specified and directed by engineer in charge. |
| 32 | M&L Glazed ceramic tiles (200x200mm) x 7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match for work on vertical surfaces such as skirting, dados and risers to steps etc. complete all as specified and directed by engineer in charge. |
| 33 | S&F Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed 2nd class hard wood complete all as specified and directed by engineer in charge. |
| 34 | S&F 30mm thick Flush shutters, solid core construction, with blockboard core and plywood face panels, commercial type on both sides one face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed by engineer in charge. |
| 35 | M&L Reinforced cement concrete (nominal mix Type B1 1:2:4 20mm graded stone aggregate as Beams, cantilevers, bressummers, lintels over 1.5 m complete all as specified and directed by engineer in charge. |
| 36 | M&L Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc Rough finished Add for fairaces of finished concret complete all as specified and directed by engineer in charge. |
| 37 | M & L for powder coated aluminium sliding window with anodized Sqm aluminium frame of 3 Track with size 92x32x1.3mm thick, 02 glass and01 stainless steel wiremesh sliding shutters with necessary channels (top rail, bottom rail and style of size 40mmx 18mm x1.1 mm thick) including glazing with tinted sheet glass panel 4.00mm thick, fitted with necessary jointing cleats, glazing clips, locking device one for each shutter rubber packing, aluminium beading, screws etc complete all as specified and directed by engineer in charge of make jindal/hindalco |
| 38 | S&F Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by engineer in charge. |
| 39 | S&F Reinforced cement concrete (nominal mix ) chajja Type B1 1:2:4 20 mm graded complete all as specified and directed by engineer in charge. |
| 40 | M&L Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed by engineer in charge. |
| 41 | M& L for TMT bars 8 mm dia and over in reinforcement, cut to length, bent to shape required,including cranking and binding with mild steel wire (anneled) not less than 0.9 mm dia for stirrups complete all as specified and directed by engineer in charge. |
| 42 | S&F pre-painted galvelum aluminium zinc coating sheet GI based corrugated steel sheet 0.5mm thick of desired colour mp tile pattern as per diretion and having tensile strength of 550 Mpa as in roof covering with selftapping screw as specified. complete all as specified and directed by engineer in charge. |
| 43 | S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof ridge covering, fixed with self tapping screws using necessary scaffolding as specified and directed by engineer in charge. |
| 44 | M&L for Preparation of new steel surface not otherwise described and applying two coats of Aluminium paint over a coat aluminium red oxide primer complete all as specified and directed by engineer in charge. |
| 45 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custodyor for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed by Engineer-in-charge. |
| 46 | Dismantling unserviceable main switch/ kitkat DBs/ MCB including wooden board from existing position and making good disturbed surfaces of wall to match with existing surfaces complete all as specified and as directed by Engineer-in-charge. |
| 47 | Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed sufaces to match with the existing surfaces complete all as specified and as directed by Engineer-in-charge. |
| 48 | Taking down ceiling fan /EXHAUST FAN of any size or make and refixing the same complete all as specified and as directed by Engineer-in-charge. |
| 49 | M&L Point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm stranded for earth continuity wire, to be drawn in and including, PVC medium grade Conduit concealed not less then 20 mm width with modular metal sunken switch with face plate for modular switch complete with brass screws with cup washers including all necessary wall cutting and making good disturbed surface complete all as specified and as directed by Engineer-in-charge. Note : (1) Making good to match with the adjoining surface shall be included in the unit rate.(2) Rate is inclusive of Cutting/chases of wall/floor/ceiling |
| 50 | One light point controlled by one, one way switch complete all as specified and as directed by Engineer-in-charge |
| 51 | One ceiling /exhaust fan point controlled by one switch and regulator complete all as specified and as directed by Engineer-in-charge |
| 52 | One 3 pin 5 amp socket out point on the same board with other switches complete all as specified and as directed by Engineer-in-charge |
| 53 | One 3 pin 5 amps socket out let point on independent board complete all as specified and as directed by Engineer-in-charge |
| 54 | All as per item above but for one socket outlet 15 Amp on independent board with 4 Sq mm cable and 2.5 Sq mm earth wire complete all as specified and as directed by Engineer-in-charge. |
| 55 | All as per item above but for one socket outlet 15 Amp on independent board with 2.5 Sq mm cable and 1.5 Sq mm earth wire complete all as specified and as directed by Engineer-in-charge. |
| 56 | Supply and Fix ,Ceiling rose surface bakelite two to three terminal complete all as specified and as directed by Engineer-in-charge. |
| 57 | Material and labour Modular white cover plate with frame of following tyhpes complete all as specified and directed complete all as specified and as directed by Engineer-in-charge. |
| 58 | white cover plate with frame, 3 module complete all as specified and as directed by Engineer-in-charge. |
| 59 | white cover plate with frame, 4 module complete all as specified and as directed by Engineer-in-charge. |
| 60 | white cover plate with frame, 6 module complete all as specified and as directed by Engineer-in-charge. |
| 61 | white cover plate with frame, 8 module complete all as specified and as directed by Engineer-in-charge. |
| 62 | Material and labour Modular Metal flush box of following types complete all as specified and as directed by Engineer-in-charge. |
| 63 | Metal flush box, 3 module complete all as specified and as directed by Engineer-in-charge. |
| 64 | Metal flush box, 4 module complete all as specified and as directed by Engineer-in-charge. |
| 65 | white cover plate with frame, 6 module complete all as specified and as directed by Engineer-in-charge. |
| 66 | white cover plate with frame, 8 module complete all as specified and as directed by Engineer-in-charge. |
| 67 | Material and labour Modular switch 1 way 10A, 1 module complete all as specified and as directed by Engineer-in-charge. |
| 68 | Material and labour Modular Socket 6A -2/3 pin combined 2 module complete all as specified and as directed by Engineer-in-charge. |
| 69 | Material and labour Modular Socket 6A/16A -2/3 pin combined 2 module complete all as specified and as directed by Engineer-in-charge. |
| 70 | Material and labour Modular switch 1 way 16A, 1 module complete all as specified and as directed by Engineer-in-charge. |
| 71 | Material and labour Modular Fan Step regulator, 120W-2 module complete all as specified and as directed by Engineer-in-charge. |
| 72 | Supply and Fix of Ceiling rose surface bakelite two to three terminal complete all as specified and as directed by Engineer-in-charge. |
| 73 | Supply and Fix of MCB DB SPN 8 Way double door type 415 V with bus bar complete all as specified and as directed by Engineer-in-charge. |
| 74 | M&L MCCB DB verticle type made of sheet steel , powder painted with neutral bus bar 200 A, neutral link, IP-30-IK08 protection grade , 415Volts TPN with 4 way Double door complete all as specified and as directed by Engineer-in-charge. Make : Indo Asian/Havells/Polycab |
| 75 | M&L MCCB TPN 100 Amps , 415Volts, 25KA ,3 Pole complete all as specified and as directed by Engineer-in-charge. Make : Indo Asian/Havells/Polycab |
| 76 | Supply and Fix of MCB SP 06 to 32 Amps 240 Volts complete all as specified and as directed by Engineer-in-charge. |
| 77 | Supply and Fix of SPN 6- 40 Amps 240 Volts complete all as specified and as directed by Engineer-in-charge. |
| 78 | Supply and Fix single pole and neutral enclouser with a two pin and earth and metal clad plug socket complete with one single pole MCB 25 Amp 240 Volts complete all as specified and as directed by Engineer-in-charge.NOTE FOR ITEM NO 38&39-(1). The unit rate includes for cutting the brick walls to accommodate DB to make flush to wall./ DB tobe fixed on wall including frame made out of MS flat 40x5mm(2).The unit rate includes for making good the disturbed surfaces including finishes to match with the adjoining surface |
| 79 | S &F LED tube light fittings decorative ultra slim linear fixture with extruded alluminium heat srink envioromentel friendly Energy efficient ready to use pack , 20 Watt , 4 feet, surface mounting type extruded pvc, snap on installers and domestic electronic Driver ,connector block ect.with all assoceries intenallt prewired & includingconeecting up with 2 core flexible cppper conductor cable with sutable size & suitable for and mounting clamps PVC squre box 75x75mm - 2 nos etc. with 100lum/watt, CRI> 70, Surge protection 4 KVA complete all as specified and as directed by Engineer-in-charge. |
| 80 | S&F LED Light luminaries Square type 36W suitable suitable for Modular/pop/Gypsum ceiling with starter, connector block, etc,complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible conductor of copper with PVC square blocks of size 600mmX600mm for fixing the fitting complete all as specified and as directed by Engineer-in-charge. |
| 81 | M&L for sub main wiring with three single core 10 Sqmm FRLSH PVC insulated with one run of Nutral Black Colour and sheathed 1100 Volts grade, standed copper conductor ISI marked drawn into fixed in an including Casing -N-Caping with all fitting and accessories and one continuous run of 6.0 Sqmm copper conductor PVC insulated (green colour) as earth wire complete all as specified and as directed by Engineer-in-charge. Note :-Five single core cables along with earth wire and Nutral and Casing -N-Caping shall be measured as one unit length |
| 82 | M&L for sub main wiring with two single core 6 Sqmm FRLSH PVC insulated and sheathed 1100 Volts grade, standed copper conductor ISI marked drawn into fixed in an including Casing -N-Caping with all fitting and accessories and one continuous run of 4.0 Sqmm copper conductor PVC insulated (green colour) as earth wire complete all as specified and as directed by Engineer-in-charge. Note :- Two single core cables along with earth wire and Casing -N-Caping shall be measured as one unit length. Please Enable Macros to View BoQ information |
| 83 | M&L for sub main wiring with two single core 6 Sqmm FRLSH PVC insulated and sheathed 1100 Volts grade, standed copper conductor ISI marked drawn into fixed in an including Casing -N-Caping with all fitting and accessories and one continuous run of 4.0 Sqmm copper conductor PVC insulated (green colour) as earth wire complete all as specified and as directed by Engineer-in-charge. Note :- Two single core cables along with earth wire and Casing -N-Caping shall be measured as one unit length. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender