Home Affairs Statutory Bodies & Commissions/Committees Closing in 19 days TDR #58085698

Tender For Construction Of New Fsb Near Tathi Over Ina Nallah On Axis Basam-Yongyyapala Of 58Th Bn Itbp

Issued by Statutory Bodies & Commissions/Committees · Dibang Valley, Arunachal Pradesh
Tender Value
1.05 Crore
Estimated cost
Bid Submission
05 Nov 2026
19 days left
EMD
2.11 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Dibang Valley → Arunachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Construction Of New Fsb Near Tathi Over Ina Nallah On Axis Basam-Yongyyapala Of 58Th Bn Itbp

BOQ

Name of Work:- Construction of New FSB Near Tathi over Ina Nallah on Axis Basam-Yongyyapala of 58th Bn ITBP
Sl. No. Item Description
1Construction of New FSB Near Tathi over Ina Nallah on Axis Basam-Yongyyapala of 58th Bn ITBP
2Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.Hard rock (blasting prohibited)
3Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
4Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
5Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
6Centering and shuttering including strutting, propping etc. and removal of form forFoundations, footings, bases of columns, etc. for mass concrete
7Centering and shuttering including strutting, propping etc. and removal of form forLintels, beams, plinth beams, girders, bressumers and cantilevers
8Centering and shuttering including strutting, propping etc. and removal of form forColumns, Pillars, Piers, Abutments, Posts and Struts
9Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
10Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
11Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand)
12Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like.Cement mortar 1:6 (1 cement : 6 coarse sand)
13Providing wood/ local wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc.Kiln seasoned and chemically treated hollock wood/ local wood
14Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
1525 mm wood / local wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with :Second class deodar wood / local wood
1612 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand)
17Finishing walls with water proofing cement paint of required shade :New work (Two or more coats applied @ 3.84 kg/10 sqm)
18Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.Made of G.I. wire of dia 4 mm
19Providing and fixing suspension steel wire ropes of dia 20 mm dia across the river with all necessary accessories such as 'U\\" bolts, anchor hook/bolts, main wire pulley of 22 mm size groove with its mounting block etc including pulling, lifting main cables, tying and fixing with anchor block etc complete.
20Providing and fixing deck steel wire ropes of 16 mm dia across the river with all necessary accessories such as 'U\\" bolts, anchor hook/bolts, decking hooks,bolts, etc including pulling, lifting main cables, tying and fixing with anchor block etc complete complete.
21Providing and fixing 12mm dia steel wire ropes for suspenders with all necessary accessories such as 'U\\" bolts, decking hooks,bolts, turn buckles, eye hooks etc including pulling, lifting main cables, tying and fixing of deck cables and suspension cables, etc complete. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58085698
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 1.05 Crore
LAST DATE 05-11-2026
Authority
Authority Name Indo Tibetan Border Police Force
Work Description Tender for Construction Of New Fsb Near Tathi Over Ina Nallah On Axis Basam-Yongyyapala Of 58Th Bn Itbp
Basic Detail
Tender No FSB/58BN/2026-I/126230/2026
Bidding Type Tender
Location
City Dibang Valley
State Arunachal Pradesh
Key Dates
Publish Date 16 Oct 2026
Submission Date 05 Nov 2026
Open Date 06 Nov 2026
Finance
Tender Value 1.05 Crore
Tender Fee Ref. Documents
EMD 2.11 Lakhs
Exemption Not Available
Document List
2f959a55-e10b-4a05-b084-9f7fcf11615b.html
BOQ_978062.xls
TenderDoc.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 05, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 19 days
Nov 06, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 20 days

Tender Documents

Download All (ZIP) ↓
html

2f959a55-e10b-4a05-b084-9f7fcf11615b.html

xls

BOQ_978062.xls

pdf

TenderDoc.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender