Tender For Additional Special Maintenance Repair Works To Flat No A3/5, A3/4, B1/4 In 60 Tngrhs @ Safgv Koyambedu, Chennai.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
30 Oct 2026
2 days left
EMD
2220
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Additional Special Maintenance Repair Works To Flat No A3/5, A3/4, B1/4 In 60 Tngrhs @ Safgv Koyambedu, Chennai.
BOQ
| Sl. No. | Item Description |
| 1 | SMR Works |
| 2 | Supplying and fixing of C.P angle cock including cost of fittings , labour for fixing etc, complete complying with relevant standard specifications and as directed by the departmental officers. (The quality of fittings should be got approved from the Competent Authority before use) |
| 3 | Supplying and fixing solid core flush shutter of both side Teak ply with 35 mm thickness and necessary T.W. internal lipping alround conforming to IS 2202-1(1999) including cost of wind appliances and furniture fittings such as 3 Nos of SS 304 Grade Parliament Hinges of Size (125mm x 150mm) , 2 Nos 300x12mm aluminium tower bolt 1 No. 200x12mm aluminium tower bolts 1no. 250x16mm aluminium aldrops, 2 nos. 200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete complying with standard specification and as directed by the departmental officers - Single leaf. |
| 4 | Brick partition walls of 11.50cm thickness using best quality Burnt Clay Brick of size 9” x 4 1/2” x 3” with class designation of 7.5 conforming to IS 1077-1992 in Cement Mortar 1:3 (One Cement and Three CS Sand) using hoop iron reinforcement if found necessary including Cost of Mortar Plasticizer, curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 5 | Plastering with Cement Mortar 1:5 ( One of cement and five of sand) 12mm thick finished with neat cement including, providing band cornice scaffolding curing etc., complete complying with relevant standard specification and as directed by the departmental officer. |
| 6 | Paving the floor with best approved quality fine polished Granite Stone Slabs of following size and Variety with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., complete complying with standard speicification and as directed by the departmental officers.(The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work) |
| 7 | Fine Polished Granite Slab of Size :Granite Slabs (Super Fine Polished with Machine CutEdges) of sizes 4'x2' and above 18mm to 20mm thickVariety : Jet Black |
| 8 | Supplying and fixing of BWR grade Common storage cupboard having an size of 1.5m x 0.6m of 2 compartment having two door shutters using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydraulic hinges, tower bolt, handles, multipurpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer before use on work. |
| 9 | Supply and application of approved anti-termite chemical treatment inside the flat, including inspection, treatment of affected areas, wall-floor junctions, skirting, wooden door/window frames, drilling and chemical injection wherever required, sealing of drilled holes, and cleaning of the work area after completion. |
| 10 | Supplying and fixing in position best quality approved make SS sink of size of 600 x 450 x 200mm including cost of 32mm dia CP waste coupling, 32mm dia PVC waste pipe with rubber plug and chain, 15mm dia brass nipple including fixing the sink in position and testing for leakages etc., complete complying with standard specifications excluding CI brackets. [The sink and specials should be got approved by the Executive Engineer before use on works] |
| 11 | Providing and polishing single nosing to existing granite slab, including edge cutting, rounding, machine polishing and finishing, complete as directed by the Engineer-in-Charge. |
| 12 | Dismantling the damaged Floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs including labour etc., etc complete and as directed by the departmental officers. |
| 13 | Paving the floor with best quality Double Charged Vitrified Tiles 600 x 600 x 8mm including Pointing size and variety conforming IS 15622 with water absorbtion less than 0.08% of approved colour and shade laid over cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer in all floors and the top pointed with White Cement mixed with colour pigments etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 14 | Supplying and fixing of 5/15A 3 pin combined flush type wall socket with 15A flush type switch concealed in suitable MS box in flush with wall and covered with 3mm thick hylem sheet inlcuding materials and labour cost etc., complete complying with standard speicification and as directed by the departmental officers. |
| 15 | Providing new Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydraulic hinges, tower bolt, handles, multipurpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer before use on work. |
| 16 | Supply and fixing of 300mm (12\\") sweep (Heavy duty) AC exhaust fan complete with necessary existing wall opening and making good of the wall inculding cost of materials and labour charges for fixing etc., all complete and as directed by the departmental officers. |
| 17 | Sub Total |
| 18 | GST @ 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender