Tender For Furnishing & Mep Works Of Banks Rented Permises, Kp Road, Alappuzha
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Nov 2026
29 days left
EMD
49500
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Alappuzha → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Furnishing & Mep Works Of Banks Rented Permises, Kp Road, Alappuzha
BOQ
| Sl. No. | Item Description |
| 1 | FINISHING WORKS |
| 2 | Gypsum board False Ceiling : Supply, fabrication and installation of Gypsum False ceiling as per the design shown in the attached drawing. Frame Work : Gyproc True Steel sections of specified / required spacing to be provided for frame work . False ceiling board - 12mm thick gypsum board . The main runner should be spaced at 900 - 1200 mm, and the secondary cross runners (Ceiling Sections) at 450 - 600 mm spacing. Mesh to be provided all all joints and filler to be applied at joints. Cutting for light fittings & other accessories deemed to be included in the unit rate |
| 3 | Putty Work : Providing and applying external weather proof plaster of paris putty of 2 - 6mm mm thickness over plastered surface/ Gypsum surface to prepare the surface even and smooth complete.Make : Burger / Asian / Berla or equivalent |
| 4 | Internal Painting : Finishing walls with Acrylic Smooth paint of required shade (1 coat primer and 2 coat emulsion for walls & ceiling. Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) .Make - Asian Apcolite Premium Emulsion / Burger Easy Clean Premior Emulsion or equivalent |
| 5 | Internal Ceiling Painting |
| 6 | Internal Wall Painting |
| 7 | Glazing Works : Design supply & installation of suspended glass door & Fixed Glazing designed to withstand the wind pressure as per IS 875 (Part-III) with Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel floor spring assembly, (one for each door panel equipped with a double-action mechanism supports 90 kg to 120 kg allowing the doors to swing both inward and outward). Stainless Steel handle, locking system etc completed for entrance & ATM area inclusive of hinged double door for entrance & hinghed single door for ATMGlass Manufacture - Saint-Gobain or equivalent Fittings - Ozone / Dorma or equivalent |
| 8 | Entrance Glass Doors as per approved design-GD |
| 9 | Branch Manager Cabin Glass Doors as per approved design-GD |
| 10 | ATM Door- Glass Door as per approved design |
| 11 | Glazing Works : Design supply & installation of suspended glass Fixed Glazing designed to withstand the wind pressure as per IS 875 (Part-III) with Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glassand Stainless Steel fitting mechanisamGlass Manufacture - Saint-Gobain or equivalent Fittings - Ozone / Dorma or equivalent |
| 12 | Entrance Fixed Glass |
| 13 | Branch Manager Cabin |
| 14 | Internal Door Frame : Providing Sal wood / Red Miranthi work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Kiln seasoned and chemically treated wood |
| 15 | Door Shutter : Providing and fixing 35 mm thick factory made 1mm thick laminated modular door shutter conforming to IS: 14616 and TADS 15:2001 (Part B), including ISI marked M.S.pressed butt hinges bright finished of required size with necessery screws, all complete as per directions of Engineer-in-Charge.Shutter - Solid wood frame using contry wood of required size, covered with 12mm thick marine plywood on both side, finished with 1mm thick laminate as per the design, wooden leeping on all sides and finished with approved shade paintMarineplywood make : Greenlamp / Century / Marino or any equivalent makeLaminate : Marino / Max / Greanlamp or equivalent |
| 16 | Ironmongries for Fixing of doors which includes 3 Nos. SS ball bearing hinges per shutter, Lick with Cylinder, Doorclosure, SS Handle as per approved design etc.Make - Dorma / Dorset/ Hafele or equivalent |
| 17 | Misclaneous necessary civil works need to be executed for smooth execution of finishing works. All majior civil works inclusive of toilet works is deemed to be carried out by the lessor. |
| 18 | INTERIOR WORK |
| 19 | Work Station : Supply, Fabrication and installation of Workstation excluding glass top made of 18/ 12 mm thick Marinel plywood, finished with 1mm thick laminate as per design including hidden surface, edge banding, wooden leepaing on 75mm thick partition, wooden skirting, 4mm thick arcylic glasss of 600 x 300mm with bank logo at front fascia fixed with SS studs, inclusive of all ironmongries excluding granite top as per the approved drawing and as per instructions of Consultant/ Engineer in-charge.Carcas & Doors - 18 mm Thick marine plywood finished with 1mm thick laminate of approved design inclusive of matching edde leeping of make Marino/ Greanlamp/ Century or equivalentCPU shelf / Drawers - 12 mm Thick marine plywood finished with 1mm thick laminate of approved design inclusive of matching ede leeping of make Marino/ Greanlamp/ Century or equivalentCublicle partition -12mm thick glass with 50 mm thick solid sal / red mirahhi/ teak wood with leaping as per design finished with approved enamel paint Skirting & other wood work - The partition between the cubicles and all projected parts & the bottom skirting to be fabricated in hard work finished with approved shade paint . A full length foot rest made of hard wood 3” x 1½” section.Ironmongries - SS 304 Soft closing Hinges, 3” dia. round / 3” square cable manager, one lockable drawers to be run on Channels, Each drawer / shutter shall be equipped with Stainless Steel (SS 304 grade) brush-finished or matte-black finished pull handle/D-handle. Make- Hettich/Ebco/ Dorset or equivalent |
| 20 | Assistant Manger - Size 1.40m x 0.80m x 0.80m |
| 21 | Staff Counter - Size 1.45m x 0.80m x 0.80m |
| 22 | Cash Counter - Internal Part-Size 1.50m x 0.80 x0.80 |
| 23 | Writing Desk - 1.00m x 0.75 x0.80 |
| 24 | Managers Work Station : Supply, Fabrication and installation of Workstation excluding glass top made of 18/ 12 mm thick Marinel plywood, finished with 1mm thick laminate as per design including hidden surface, edge banding, wooden leepaing on 75mm thick partition, wooden skirting, 4mm thick arcylic glasss of 600 x 300mm with bank logo at front fascia fixed with SS studs, inclusive of all ironmongries excluding granite top as per the approved drawing and as per instructions of Consultant/ Engineer in-charge.Carcas & Doors - 18 mm Thick marine plywood finished with 1mm thick laminate of approved design inclusive of matching edde leeping of make Marino/ Greanlamp/ Century or equivalent. CPU shelf / Drawers - 12 mm Thick marine plywood finished with 1mm thick laminate of approved design inclusive of matching ede leeping of make Marino/ Greanlamp/ Century or equivalent. Worktop - 18 mm Thick marine plywood finished with 1mm thick laminate on top and 0.8mm thick laminate at bottom of approved design inclusive of matching edde leeping of make Marino/ Greanlamp/ Century or equivalent. Cublicle partition -12mm thick glass with 50 mm thick solid sal / red mirahhi/ teak wood with leaping as per design finished with approved enamel paint Skirting & other wood work - The partition between the cubicles and all projected parts & the bottom skirting to be fabricated in hard work finished with approved shade paint . A full length foot rest made of hard wood 3” x 1½” section.Ironmongries - SS 304 Soft closing Hinges, 3” dia. round / 3” square cable manager, one lockable drawers to be run on Channels, Each drawer / shutter shall be equipped with Stainless Steel (SS 304 grade) brush-finished or matte-black finished pull handle/D-handle. Make- Hettich/Ebco/ Dorset or equivalent |
| 25 | Mangers Table - Size1.70 m x 0.80m x 0.80m- 1.0 Nos |
| 26 | Pantry Floor Unit : Supply, Fabrication and installation of Pantry floor unit excluding granite top made of 18/ 12 mm thick Marinel plywood, finished with 1mm thick laminate as per design including hidden surface, edge banding, wooden skirting, inclusive of all ironmongries excluding granite top as per the approved drawing & instructions of Consultant/ Engineer in-charge.Carcas & Doors - 18 mm Thick marine plywood finished with 1mm thick laminate of approved design inclusive of matching edde leeping of make Marino/ Greanlamp/ Century or equivalentDrawers - 12 mm Thick marine plywood finished with 1mm thick laminate of approved design inclusive of matching ede leeping of make Marino/ Greanlamp/ Century or equivalentSkirting - the bottom skirting to be fabricated in hard work finished with approved shade paint Ironmongries - SS 304 Soft closing Hinges, one lockable drawers to be run on Channels, Each drawer / shutter shall be equipped with Stainless Steel (SS 304 grade) brush-finished or matte-black finished pull handle/D-handle. Make- Hettich/Ebco/ Dorset or equivalent |
| 27 | Pantry Unit |
| 28 | Glass Counter Top : Providing and fixing 8mm thick plain float glass top over existing laminated working cubicle tops, including cutting to required shapes/sizes, grinding, high-gloss C-edge polishing (round/pencil edge profile), cleaning, providing rubber buffer pads/silicone cushioning, and placing accurately in position as per approved drawings, design, and direction of the Engineer-in-Charge / Interior Designer. |
| 29 | Branch Manger - Size 1.70m x 0.80m x 0.80m |
| 30 | Assistant Manger - Size 1.25m x 0.80m x 0.80m |
| 31 | Staff Counter - Size 1.45m x 0.80m x 0.80m |
| 32 | Cash Counter - Internal Part-Size 1.50m x 0.80 x0.80 |
| 33 | Document Controller desk |
| 34 | Fabrication of Low Shelf |
| 35 | Pantry Unit |
| 36 | File Storage Cupboards : Supply, Fabrication and installation of File Storage Cubboards made of 18/ 12 mm thick Marinel plywood, finished with 1mm thick laminate as per design including hidden surface, edge banding, wooden skirting, inclusive of all ironmongries excluding glass top as per the approved drawing and as per instructions of Consultant/ Engineer in-charge.Carcas & Doors - 18 mm Thick marine plywood finished with 1mm thick laminate of approved design inclusive of matching edde leeping of make Marino/ Greanlamp/ Century or equivalentBackside / Drawers - 12 mm Thick marine plywood finished with 1mm thick laminate of approved design inclusive of matching ede leeping of make Marino/ Greanlamp/ Century or equivalentSkirting - The skirting to be fabricated in hard work finished with approved shade paint . Ironmongries - SS 304 Soft closing Hinges, one lockable drawers to be run on Channels, Each drawer / shutter shall be equipped with Stainless Steel (SS 304 grade) brush-finished or matte-black finished pull handle/D-handle, magnic catch lock etc.. Make- Hettich/Ebco/ Dorset or equivalent |
| 37 | File Shelf @ Clerck Side-Low Desk |
| 38 | File Shelf @ Manager Cabin |
| 39 | File Shelf @ Records |
| 40 | Partition for Cash counter : 75mm thick Wooden Partition consist of 50mm x 50mm thick hard wooden frame (Wood: Anjily/ Sal/ red miranthi or equivalent ), covering withe combination of Aluninimun grill of approved design, 12mm thick glass, 12mm Thick Marine Water Proof Plywood on both side finished with 1mm thick Laminate (Greenlam / Merino/ max or equivalent .) of approved shade including 50mm Wooden Skirting at bottom (Approved colour & Shade) as per the drawing. |
| 41 | Partition Work : 75mm thick Wooden Partition consist of 50mm x 50mm thick hard wooden frame (Wood: Anjily/ Sal/ Red mirandi or equivalent ), 12mm Thick Marine Water Proof Plywood on both side finished with 0.8mm thick Laminate (Greenlam / Merino/ max or equivalent.) of approved shade, ironmongries for half door including 50mm Wooden Skirting at bottom as per the approved design and instruction from Consultant/ Engineer- |
| 42 | Notice Board : Fabrication,supply and installation of Notice Board with hard wood brame, 18mm thick block board finished with special cloth including fixing arrangement . |
| 43 | Column Cladding : Cladding of colimn with combination of 12mm thick Thick Marine Water Proof Plywood onone side finished with 1mm thick Laminate (Greenlam / Merino/ max or equivalent .) of approved shade & 6mm thick mirror with 6mm thick marine plywood as per the approved design including 50mm Wooden Skirting at bottom (Approved colour & Shade) as per the drawing. |
| 44 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts,locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer . |
| 45 | MEP WORK |
| 46 | Air-conditioning System |
| 47 | Split Inverter type AC units : The 1.0 TR Inverter type units having one indoor unit and one outdoor unit comprising of INVERTER rotary compressor functioning with environment friendly refrigerant like R32 or equivalent. The refrigerator used should be ozone non-depleting. The unit should have full function battery operated cordless remote control. The indoor units shall be mounted at a suitable height. The outdoor unit shall be mounted on wall bracket or on a raised platform of suitable length and width at a height of 45 cm from ground as per site condition or as directed by Engineer–In-Charge. The drain pipe should be as per Schedule with suitable length. The refrigerant pipe should be well insulated to avoid condensation. The unit shall be suitable to operate on 230 +/- 10%, 50Hz AC Supply for 1.5/2.0 TR units. The Unit shall be of min. BEE-5 star rating. |
| 48 | Split Inverter type AC units : The 1.5 TR Inverter type units having one indoor unit and one outdoor unit comprising of INVERTER rotary compressor functioning with environment friendly refrigerant like R32 or equivalent. The refrigerator used should be ozone non-depleting. The unit should have full function battery operated cordless remote control. The indoor units shall be mounted at a suitable height. The outdoor unit shall be mounted on wall bracket or on a raised platform of suitable length and width at a height of 45 cm from ground as per site condition or as directed by Engineer–In-Charge. The drain pipe should be as per Schedule with suitable length. The refrigerant pipe should be well insulated to avoid condensation. The unit shall be suitable to operate on 230 +/- 10%, 50Hz AC Supply for 1.5/2.0 TR units. The Unit shall be of min. BEE-5 star rating. |
| 49 | Stbilizer for Split AC units: Supply and installation of Stabilizer for AC Unit with specification of Input Voltage : 230V, 50HZ, AC Supply, Working Voltage Range: 150V to 280V or as per OEM Specification, Capacity : ≥15 Amps, Protection of Stabilizer : i) Low and High Voltage Cut-off Protection ii) Built in Thermal Overload, iii) Intelligent Time Delay System |
| 50 | Electrical Works |
| 51 | Supply , installation, testing & commissioning for light, fan, call bell & 5 A plug points, 6 Amps switch socket, 16Amps Switch socket, 16 Amps DP switch etc. in HDPVC conduits, wiring including switch / socket with PVC insulated stranded copper conductor wires and earthing solid green PVC insulated Cu. conductor from DB via switch to the point,of any length withproviding and fixing of modular switch, modular plate, suitable GI box and PVC connector, hylem junction box cover, fan cover etc. complete in all respects including testing & commissioning as required for following. Wires - Polycab/ Finolex/ Havells/KEI or equivalentSwitch & Sockets - Legrand Mosaic Series / Anchor by Panasonic / Havells or equivalent |
| 52 | Primary One ceiling point controlled by one no. 6 amps switch ( 2 X 2.5mm2 + 1 x 1 mm2- 5 to 10 merters Mtr.) |
| 53 | Secondary ceiling point controlled by one no. 6 amps switch ( 2 X 2.5mm2 + 1 x 1 mm2- 3 to 5 merters Mtr..) |
| 54 | One wall point controlled by one no. 6 amps switch ( 2 X 2.5mm2 + 1 x 1 mm2- 9Mtr.) |
| 55 | Exhaust point controlled by a single 6 amps switch (2 X 2.5mm2 + 1 x 1 mm2- 8Mtr.) |
| 56 | One no. ceiling / wallfan point with provision for electronic fan regulator and controlled by one no. 6A one way switch. ( 2 X 2.5mm2 + 1 x 1 mm2- 10Mtr..) |
| 57 | Wiring for 1 no. 250V 1 phase, 6 A (5 pin) switched socketoutlet. ( 2 X 2.5mm2 + 1 x 1 mm2- 16Mtr..)(Independent Socket) |
| 58 | Wiring for 1 no. 250V 1 phase, 16 A (5 pin) switched power socket outlet. ( 2 X 4.0mm2 + 1 x 1 mm2- 16Mtr..)(Independent Socket) |
| 59 | Wiring for 1 no. 250V 1 phase, 16 A DP switched socket outlet for Ac( 2 X 4.0mm2 + 1 x 1 mm2- 25Mtr..)(DP Switch Socket for Ac ) |
| 60 | Supply, installation, testing and commissioning of light fittings & FanMake : Philips/ Dewton/ Havells or equivalent |
| 61 | 600 x 600 mm ceiling light, a power consumption between 30W and 48W, an input voltage of 220-240V AC, a color temperature ranging from cool white (5500-7000K) to warm white (2700-3200K), and an LED light source. These light sto designed for recessed mounting in suspended ceilings, provide uniform illumination, and come with a long operational lifespan, often exceeding 30,000 hours. |
| 62 | Providing an 12W internal Square LED Ceiling Light (15 cm × 15 cm overall size) complete with an external/internal constant-current electronic driver, spring retention clips (or surface bracket), and mounting accessories. |
| 63 | Supply, installation, testing, and commissioning of IP-rated (IP44 / IP65) square recessed/surface LED ceiling downlight panel of size 150 mm × 150 mm, power rating 12 Watts, complete with constant-current driver, internal wiring with 1.5 sq. mm FRLS copper conductor, connection accessories, ceiling cutout/mounting, and tested to complete satisfaction as required. |
| 64 | 20W LED B22D Batten Tubelight| Cool White | Up to 60% Energy Saving | Ultra Slim Design|Upto 4KV Surge Protection|Enviromental Friendly|BIS Approved. |
| 65 | Wall Fan, Enviromental Friendly,BIS Approved make of Bajaj/ Crompton /Orient / Havella or evuivalent |
| 66 | Ceiling Fan : Supplying, fixing, testing, and commissioning of a 1200 mm (1.20 m) sweep, BEE 5-star rated, A.C. ceiling fan equipped with a copper wound motor, double ball bearing, and aerodynamically designed blades, including standard accessories such as a suspension down-rod, top and bottom canopies, heavy-duty hanging shackle, and safety wire, suspending the assembly on an existing concealed M.S. fan hook, and making necessary electrical connections using 3-core 1.5 sq.mm FR PVC insulated stranded copper conductor flexible cable, conforming strictly to IS 374 standards, complete in all respects as per standard public works schedules and site requirements. |
| 67 | 8-WAY TPN DB Suitable for 24 Nos. outgoing. : -Supply, installation, testing and commissioning of necessary MCB's B series of 10KA breaking capacity, RCD's, isolator etc. in a Phase segregation (Tier type) distribution boards including dressing, ferruling, thimbling of wires etc. complete as per specifications |
| 68 | Plumbing Work |
| 69 | Supply & Fixing Single bowl stainless steel sink of required size with single drain board, C.I. brackets painted, waste and flexible pipe to trap, with necessary union complete including cutting and making good the walls wherever required. |
| 70 | Supply & Fixing white / coloured glazed vitreous china under Wash Basin of required size with adjustable C.I. brackets of approved pattern painted white,C.P.brass waste coupling, C.P. cast brass bottle trap and union, 32 mm dia C.P. pipe of required length to wall and C.P. wall flange complete including cutting and making good the walls wherever required as per instruction of engineer in charge. |
| 71 | Fixing C.P. brass single lever wash basin mixer with connecting pipes complete including cutting and making good. |
| 72 | Fixing 15 mm C.P. brass Counter mounting single lever mixing fitting for kitchen sink with swinging and Swivel spout, connecting pipes, complete including cutting and making good the walls, counter stone / slabs wherever required. |
| 73 | Providing and fixing 40mm dia. UPVC pipes 6Kg/cm2 (IS 4985- 1983) including injection moulded fitting wherever required e.g. tees, bends of any degree, clamps, couplings, adopters, plugs, unions etc and jointing with solvent cement including cutting and making good the floors and walls wherever required complete as per site. |
| 74 | Supply of 25mm dia. Water Supply pipes f CPVC SDR 11 / SCH 40 pipe inclusive of required fittings in accordance to ASTM D 2846 / ASTM F441 for pipes, ASTM F 438 /ASTM F439 for fittings, ASTM - F 493 for the solvent cement. |
| 75 | Structured Data Cabling System |
| 76 | Supply, installation, testing and commissioning of Structured Data Cabling System includes network outlets, cabling, racks, patch panels, switchesetc. |
| 77 | Supply, laying, testing and commissioning of Cat-6 UTP Cable, 23 AWG, LSZH/PVC including HDPE Conduit |
| 78 | Cat-6 Information Outlet with Face Plate and Back Box |
| 79 | Dual RJ45 Data Outlet Complete with Face Plate |
| 80 | Rack & Accessories which includes 12U/22U/42U Floor/Wall Mounted Network Rack with Lockable Door, 24-Port Cat-6 Patch Panel, Horizontal Cable Manager, Vertical Cable Manager, Rack Power Distribution Unit (PDU), Rack Cooling Fan Unit, Rack Shelf etc. |
| 81 | CCTV System : Brands CP Plus, Prama India, Godrej Security Solutions, Honeywell etc. |
| 82 | Supply , installation, testing & commissioning CCTV System which consist of HDPVC conduits, CAT6 Cable wiring including socket with CAT6 cable and fixing of modular switch, modular plate, suitable GI box and PVC connector, hylem junction box cover, fetc. Switch & Sockets - Legrand Mosaic Series / Anchor by Panasonic / Havells or equivalent |
| 83 | 4 MP Outdoor Bullet IP Camera with IR Night Vision, IP66, PoE including Camera Mounting Brackets |
| 84 | MP Indoor Dome IP Camera with IR Night Vision, PoE including Camera Mounting Brackets |
| 85 | 16/32 Channel Network Video Recorder (NVR) with H.265 Compression for recording capacity for 90 days |
| 86 | 8 TB Surveillance Grade SATA HDD (3.5\\", 24×7 operation, for DVR/NVR) |
| 87 | HDMI Monitor, 32-inch LED(Samsung, LG, Acer, Dell, , etc.) and features. |
| 88 | Cabling which includes HDPE Conduit , Cat-6 UTP Cable, PVC Junction Boxes, RJ45 Connectors, Face Plates and Information Outlets etc. |
| 89 | Network Equipment which consist of 24-Port PoE Gigabit Network Switch, 8-Port PoE Gigabit Network Switch, Network Rack (12U/15U/22U) Complete with Accessories, Cable Manager and Patch Panel etc. |
| 90 | Power Distribution Board for CCTV |
| 91 | Software Configuration which includes CCTV Management Software License (if applicable), Mobile Viewing Configuration, Remote Monitoring Configuration etc. |
| 92 | 10 kVA Online UPS System with 120 Minutes Battery Backup |
| 93 | Supply of 10 kVA Online Double Conversion UPS, 3-Phase Input / 1-Phase Output (or as specified), Output PF ≥ 0.9, LCD Display, Static Bypass, Manual Bypass, DSP Controlled |
| 94 | Sealed Maintenance Free (SMF) VRLA Battery Bank suitable for 10 kVA Online UPS with 120 minutes backup at full load, complete with batteries, interconnecting links, rack, battery stands and accessories |
| 95 | Heavy-duty Powder-coated MS Battery Rack for battery bank complete with interconnections |
| 96 | Battery Interconnecting Copper Cables complete with tinned copper compression lugs, heat-shrink sleeves, hardware and accessories for 10 kVA UPS battery bank |
| 97 | UPS Input Isolator/MCCB, 63A TPN complete with enclosure |
| 98 | UPS Output Isolator/MCCB, 63A TPN/SPN complete with enclosure |
| 99 | External Maintenance Bypass Panel for 10 kVA Online UPS complete with 63 A TPN MCCB (Input), 63 A DP MCCB (Output), Manual Changeover/Bypass Arrangement, copper busbars, internal wiring, powder-coated enclosure, cable glands, neutral & earth bars, labels and accessories |
| 100 | UPS Distribution Board (UPS DB) complete with outgoing MCBs/RCCBs |
| 101 | 4C × 16 sq.mm Copper XLPE Armoured Cable from Main Panel to UPS |
| 102 | Supply and installation of Chemical Earthing Electrode, 50 mm dia × 3 m copper-bonded/GI electrode complete with conductive backfill compound, inspection chamber, funnel with wire mesh, HDPE watering pipe, earth lead connection, clamps, excavation, backfilling, testing and commissioning |
| 103 | Supply and installation of External illumination sign board |
| 104 | Supply, fabrication, installation, testing and commissioning of outdoor LED illuminated sign board of size 3000 mm × 1000 mm × 150 mm, fabricated using powder-coated MS frame with 3 mm ACP front panel, laser-cut acrylic letters, IP65-rated high-brightness SMD LED modules, LED driver, FRLS wiring, weatherproof junction box, complete with mounting brackets, stainless steel fasteners and all accessories required for complete installation. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 29 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 32 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender