Tender For Construction Of On Nabladisa Didambra Semkhor Road In Dima Hasao District Under Arrbp Funded By World Bank.
Tender Value
6.57 Crore
Estimated cost
Bid Submission
05 Nov 2026
18 days left
EMD
13.15 Lakhs
Bank guarantee accepted
Document Fee
13150
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dima Hasao → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of On Nabladisa Didambra Semkhor Road In Dima Hasao District Under Arrbp Funded By World Bank.
BOQ
| Sl. No. | Item Description |
| 1 | FoundationProviding and constructing temporary island for construction of pile foundation with depth of water upto 4.0m complete as per technical specification |
| 2 | Pile load test on single vertical pile in accordance withIS:2911(Part-IV).a). Initial and Routine load test |
| 3 | Pile load test on single vertical pile in accordance withIS:2911(Part-IV).B. Lateral load test |
| 4 | Pile integrity test:Integrity testing for all piles by using pile driving analyser or equivalent as approved by engineer in charge and detailed in specification. Test to be carried out by an approved reputed agency. Item to include all incidental work to execute the job |
| 5 | Bored cast-in-situ M35 grade R.C.C. Pile excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m. Pile diameter-1200mm |
| 6 | Providing placing and driving in position for RCC piles 6mm permanent M.S Liner upto required depth including fabricating and setting out as per detailed drawing |
| 7 | Excavation for Structures: Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. (B) Mechanical Means(II) With dewatering(i) Depth upto 3 m |
| 8 | Levelling course for Pile cap |
| 9 | Cement concrete for reinforced concrete in Pile cap complete as per drawing and Technical Specification.RCC Grade M35 (Using Batching Plant, Transit Mixer and Concrete Pump) |
| 10 | Supplying, fitting and placing TMT (Fe-500 D) reinforcement bar (From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL) in foundation complete as per drawings and technical specifications Clauses 1000 and 1202Piles,Pile caps |
| 11 | Plain/Reinforced cement concrete in sub structure complete as per drawing and technical specification and steel shuttering formwork (N) Without plasticiser H. RCC Grade M35 b. Height 5m to 10mCase II. With Batching Plant, Transit Mixer and Concrete Pump |
| 12 | Furnishing and Placing Reinforced/Prestressed cement concrete in super-structure as per drawing and Technical Specification' including steel shuttering formwork. (N) Without PlasticiserE PSC Grade M40Case ii. Using Batching Plant, Transit Mixer and Concrete Pump(i) For Solid slab super structureb. Height 5m to 10m |
| 13 | Supplying, fitting and placing TMT (Fe-500 D) reinforcement bar (From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202Abutment , Abutment Cap,Dirt walls, Pier, Pier cap, Pedestals, Sesmic arrestor, Riding return walls, U return wall / Fly Return walls |
| 14 | Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size toeards the wall and provided over the entire surfaces behind the abutement, wing wall and return wall to the full height compacted to firm condition complete as per drawing and technical specification. |
| 15 | Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical specifications (1000 mm c/c) |
| 16 | Rebound Hammer test:Non-Destructive tecting with rebound hammer for detection of damage zone in reinforced concrete structures and furnishing the finding in proper comprehensing format. |
| 17 | Ultrasonic pulse velocity test Non-Destructive tecting with ultrasonic pulse velocity meter with data storage facility for detection of cracks voids and other imperfections in reinforced concrete structure and furnishing the finding thereof in proper comprehnsible format complete as directed by the department |
| 18 | SuperstructureFurnishing and Placing Reinforced/Prestressed cement concretein super-structure as per drawing and Technical Specification'including steel shuttering formwork. (N) Without PlasticiserE PSC Grade M40Case ii. Using Batching Plant, Transit Mixer and Concrete Pump(ii) For T-beam and Slabb. Height 5m to 10m |
| 19 | Furnishing and Placing Reinforced/Prestressed cement concrete in super-structure as per drawing and Technical Specification'including steel shuttering formwork. (N) Without PlasticiserD RCC/PSC Grade M35Case ii. Using Batching Plant, Transit Mixer and Concrete Pump(ii) For T-beam and Slabb. Height 5m to 10m |
| 20 | PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification |
| 21 | Reinforced cement concrete approach slab (M30) including reinforcement and formwork complete as per drawing and Technical specification.TMT-IS 1786 ( Fe-500 D) Primary Producer (TATA/ SAIL/ Esser Steel/ Jindal panther steel/ Shyam steel or equivalent) |
| 22 | Reinforced Cement Concrete Crash Barrier: Provision of an Reinforced cement concrete crash barrier at the edges of the road, approaches to bridge structures and medians, constructed with M-20 grade concrete with HYSD reinforcement conforming to IRC:21 and dowel bar 25mm dia, 450mm long at expansion joints filled with pre moulded asphalt filler board, keyed to the structure on which it is built and installed as per design given in the enclouser to MOST circular No. RW/NH - 33022/1/94-DO III dated June 1994 as per dimension in the approved drawing and at locations directed by the engineer, all as specified. |
| 23 | High tensile steel wires/strands including all accessories for stressing, stressing operations and grouting complete as per drawing and Technical Specifications |
| 24 | Supplying, fitting and placing TMT (Fe-500 D) reinforcement bar (From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL) in superstructure complete as per drawings and technical specification Clauses 1002, 1010 & 1202PSC Girder, End Diaphragm, Deck slab |
| 25 | Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications |
| 26 | Painting on concrete surface: (Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 Sq.m. ) For Plain surface |
| 27 | Supplying, fitting and fixing in position true to line and level POT-PTFE bearing consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing rings, dust seals, PTFE surface sliding against stainlesssteel matting surfaces, complete assembly to be of cast steel/fabricated structural steel, meatal and elastomer elements to be as per IRC:83 part-I &II respectively and parts conforming to BS:5400, section 9.1 & 9.2 and clause 2006 of MORTH&S Specification complete as per drawing and approved technical specification.FIX ,FREE,LONG,TRANS 230 MT |
| 28 | Strip Seal Expansion Joint: Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm, complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer's instruction for installation. |
| 29 | Providing and fixing drainage spouts as per MORT & H specifications. |
| 30 | Span Load Test:Load testing of one or more spans of bridge as selected by the engineer as per approved load test procedure following relevant IS/IRC/Railway codes with contractor's labour, deflection measuring instruments, loading materials, recording and analyzing the load testing results including all leads and lifts etc. complete as required. The rates are all inclusive and will be paid after load test is finished and girder is cleared of the kentledges/loading materials etc. The load shall be 1.25 times the stipulated design load based on Design load & not span (Extra for every increase of 100.00mt or part there for in the span load capacity upto 800.00 mt |
| 31 | PROTECTION WORK:Providing and laying filter material underneath pitching in slopes complete as per drawing and technical specifications Clause 1302 150 mm Filter Media |
| 32 | Providing and laying pitching on slopes laid over prepared filter media as per drawing and technical specifications Clause 1302300 mm thick stone pitching |
| 33 | Providing and laying of boulder apron laid in wire crates with 4 mm dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm mesh (woven diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 25 kg each as per drawing and technical specifications Clause 1301 |
| 34 | ROAD WORKS:Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201.(ii) By Mechanical Means(a) In area of non-thorny jungle |
| 35 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting p g to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5(i) Private Land |
| 36 | Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per Technical Specification Clause 302.3 |
| 37 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.(i) Private Land |
| 38 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.(ii) For Grading- II Material |
| 39 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading-2 as per Technical Specification Clause 405.By Manual Means |
| 40 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading-3 as per Technical Specification Clause 405.By Manual Means |
| 41 | Providing and laying interlocking concrete block pavement with M40 grade grade of concrete blocks having thickness 80mm as per technical specification clause 1504 complete including carriage.(a) Including Edge Block/ Edge Restraints |
| 42 | Furnishing and laying of the live sods of perennial turf forming grass on embankment slope, verges or other locations shown on the drawing or as directed by the Engineer including preparation of ground, fetching of sods and watering as per Technical Specification Clause 309. |
| 43 | ROAD SAFETY WORKS:Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground bymeans of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801(i) 800mm x 600mm rectangular |
| 44 | Metal Beam Crash Barrier, Type - A: \\"W\\" Metal Beam Crash Barrier (Providing and erecting a \\"W\\" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2m center to center, 1.8 m high, 1.1m below ground/road level, all steel parts and fitments to be galvanized by hot dip process, all fitting to conform to IS:1367 and IS:1364, metal beam rail to be fixedon the vertical post with a spacer of channel section 150mm x 75mm x 5mm, 330mm long complete as per clause 810.) |
| 45 | Painting lines, Dashes, Arrows, etc. on Road in Two Coats on New Work Painting lines, dashes, arrows, etc. on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous / concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and Technical Specification Clause 1702 |
| 46 | Tree PlantationPlanting of Trees and their Maintenance for three Year (Planting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge mannure, planting the saplings, backfilling the trenches, watering , fixing the tree guatrd and maintaining the plants for one year.Br. on Nabladisa Didambra Semkhor Road in Dima Hasao District (Span 3 x 40) |
| 47 | Air quality monitoring At 3 locations for 2seasons for 2 consecutive years. (Construction Stage)Br. on Nabladisa Didambra Semkhor Road in Dima Hasao District (Span 3 x 40) |
| 48 | Air quality monitoring at 3 locations for 2 seasons for 1year. (Operation Stage)Br. on Nabladisa Didambra Semkhor Road in Dima Hasao District (Span 3 x 40) |
| 49 | Water quality monitoring at 3 locations for 2 seasons for 2 consecutive years.(Construction Stage)Br. on Nabladisa Didambra Semkhor Road in Dima Hasao District (Span 3 x 40) |
| 50 | Water quality monitoring at 3l locations for 2 seasons for 1 year. (Operation Stage)Br. on Nabladisa Didambra Semkhor Road in Dima Hasao District (Span 3 x 40) |
| 51 | Noise quality monitoring at 3 Locations for 2 seasons for 2 consecutive years. (Construction Stage)Br. on Nabladisa Didambra Semkhor Road in Dima Hasao District (Span 3 x 40) |
| 52 | Noise quality monitoring at 3 locations for 2 seasons for 1 year. (Operation Stage)Br. on Nabladisa Didambra Semkhor Road in Dima Hasao District (Span 3 x 40) |
| 53 | Soil quality monitoring at 3 locations for 2 seasons for 2 consecutive years. (Construction Stage)Br. on Nabladisa Didambra Semkhor Road in Dima Hasao District (Span 3 x 40) |
| 54 | Soil quality monitoring at 3 locations for 2 seasons for 1 year.(Operation Stage)Br. on Nabladisa Didambra Semkhor Road in Dima Hasao District (Span 3 x 40) |
| 55 | Training related to Capacity BuildingBr. on Nabladisa Didambra Semkhor Road in Dima Hasao District (Span 3 x 40) |
| 56 | The Provisional Sum of Rs. 2,00,918 (Rupees Two Lakh Nine Hundred Eighteen Only) is meant for tree felling/plantation and Occupational health and safety. This is a fixed amount to be utilised during implementation for the purpose of utility shifting and tree felling/plantation and Occupational health and safety. (Bidder is not required to quote the fixed amount separately) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender