Tender For Renovation Of College Canteen And Kitchen Post Graduate Govt. College For Girls Sector-42, U.T. Chandigarh.
Tender Value
7.36 Lakhs
Estimated cost
Bid Submission
23 Oct 2026
6 days left
EMD
14733
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of College Canteen And Kitchen Post Graduate Govt. College For Girls Sector-42, U.T. Chandigarh.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. .2.8 |
| 2 | All kinds of soil .2.8.1 |
| 3 | Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : .2.10 |
| 4 | All kinds of soil .2.10.1 |
| 5 | Pipes, cables etc, not exceeding 80 mm dia .2.10.1.1 |
| 6 | Pipes, cables etc. exceeding 80 mm dia. But not exceeding 300 mm dia .2.10.1.2 |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : .4.1 |
| 8 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) .4.1.3 |
| 9 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) .4.1.10 |
| 10 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level .5.1 |
| 11 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size de rived from natural sources) .5.1.3 |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for .5.9 |
| 13 | Suspended floors, roofs, landings, balconies and access platform .5.9.3 |
| 14 | Edges of slabs and breaks in floors and walls .5.9.16 |
| 15 | Under 20 cm wide .5.9.16.1 |
| 16 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. .5.22 |
| 17 | Thermo-Mechanically Treated bars of grade Fe-500D or more. .5.22.6 |
| 18 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: .6.1 |
| 19 | Cement mortar 1:4 (1 cement : 4 coarse sand) .6.1.1 |
| 20 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. .6.13 |
| 21 | Cement mortar 1:3 (1 cement :3 coarse sand) .6.13.1 |
| 22 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade , colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. .8.2 |
| 23 | Granite stone slab of colour black, Cherry/Ruby red .8.2.2 |
| 24 | Area of slab over 0.50 sqm .8.2.2.2 |
| 25 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Size 300mm x 600mm) .8.31 |
| 26 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). .9.23 |
| 27 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), ransparent or dyed to required colour or shade, with nuts and screws etc. complete : .9.96 |
| 28 | 250x16 mm .9.96.2 |
| 29 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : .9.97 |
| 30 | 150x10 mm .9.97.4 |
| 31 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : .9.100. |
| 32 | 125 mm .9.100.1 |
| 33 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. .9.101 |
| 34 | Single rubber stopper .9.101.1 |
| 35 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. .11.56 |
| 36 | Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent .11.56.1 |
| 37 | 12 mm cement plaster of mix : .13.4 |
| 38 | 1:4 (1 cement: 4 coarse sand) .13.4.1 |
| 39 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : .13.41 |
| 40 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre .13.41.1 |
| 41 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : .13.62 |
| 42 | Two or more coats on new work over an under coat of suitable shade with ordinary paint ofapproved brand and manufacture .13.62.1 |
| 43 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. .13.8 |
| 44 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. .15.2 |
| 45 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) Floor area .15.2.1 |
| 46 | Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) .15.2.2 |
| 47 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : .15.12 |
| 48 | Of area 3 sq. metres and below .15.12.1 |
| 49 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. .15.23 |
| 50 | For thickness of tiles 10 mm to 25 mm .15.23.1 |
| 51 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. .15.56 |
| 52 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. .15.6 |
| 53 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : .17.3 |
| 54 | W.C. pan with ISI marked white solid plastic seat and lid .17.3.1 |
| 55 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: .17.10 |
| 56 | Kitchen sink without drain board .17.10.2 |
| 57 | 610x460 mm bowl depth 200 mm .17.10.2.2 |
| 58 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : .17.13 |
| 59 | Orissa pattern W.C. pan of size 580x440 mm .17.13.2 |
| 60 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. .17.16A |
| 61 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. .17.19 |
| 62 | 10 litre (full flush) capacity-white .17.19.1 |
| 63 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. .17.28 |
| 64 | Semi rigid pipe .17.28.1 |
| 65 | 32 mm dia .17.28.1.1 |
| 66 | Providing and fixing soil, waste and vent pipes : .17.35 |
| 67 | 100 mm dia .17.35.1 |
| 68 | Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 .17.35.1.2 |
| 69 | 75 mm diameter : .17.35.2 |
| 70 | Centrifugally cast (spun) iron socketed pipe as per IS: 3989 .17.35.2.2 |
| 71 | Providing and fixing heel rest sanitary bend .17.4 |
| 72 | 100 mm dia .17.40.1 |
| 73 | Sand cast iron S&S as per IS - 3989 .17.40.1.2 |
| 74 | 75 mm dia .17.40.2 |
| 75 | Sand cast iron S&S as per IS - 3989 .17.40.2.2 |
| 76 | Providing and fixing collar : .17.57 |
| 77 | 100 mm .17.57.1 |
| 78 | Sand cast iron S&S as per IS - 3989 .17.57.1.2 |
| 79 | 75 mm .17.57.2 |
| 80 | Sand cast iron S&S as per IS - 3989 .17.57.2.2 |
| 81 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : .17.58 |
| 82 | 100 mm .17.58.1 |
| 83 | 75 mm .17.58.2 |
| 84 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : .17.6 |
| 85 | 100 mm inlet and 75 mm outlet .17.60.2 |
| 86 | Sand cast iron S&S as per IS - 3989 .17.60.2.1 |
| 87 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : .18.11 |
| 88 | 15 mm dia nominal bore .18.11.1 |
| 89 | 20 mm dia nominal bore .18.11.2 |
| 90 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality screwed end) : .18.17 |
| 91 | 20 mm nominal bore .18.17.1A |
| 92 | Providing and fixing uplasticised PVC connection pipe with brass unions : .18.21 |
| 93 | 45 cm length . 18.21.2 |
| 94 | 20 mm nominal bore .18.21.2.2 |
| 95 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 .18.49 |
| 96 | 15 mm nominal bore .18.49.1 |
| 97 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 .18.53 |
| 98 | 15 mm diameter bore .18.53.1 |
| 99 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. .18.53A |
| 100 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: .19.4 |
| 101 | 100x100 mm size P type .19.4.1 |
| 102 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 .19.4.1.1 |
| 103 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: .19.3 |
| 104 | Inside dimensions 455x610 mm and 45 cm deep for single pipe line : .19.30.1 |
| 105 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 .19.30.1.1 |
| 106 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. .NSR |
| 107 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws . |
| 108 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards. .NSR |
| 109 | 15 mm nominal bore . |
| 110 | Providing and fixing of looking glass with pVC beeding 1/4\\" with plastic hard board or with studs complete in all respect .NSR |
| 111 | Providing and fixing C.P. brass toilet paper roll Holder with Flap complete in all respect. Make Jaquar Model no. ACN-CHR-151N or equivalent make model of approved make as per approved make list .NSR |
| 112 | Providing and fixing of Single Towel Rail 600mm Long, Stainless Stee complete in all respects Make Jaquar Model no. ACN-CHR-1111SM or equivalent make model of approved make as per approved make list .NSR |
| 113 | Providing and fixing of Soap Dispenser with Glass Bottle complete in all respects Make Jaquar Model no.CPA-CHR-1135 or equivalent make model of approved make as per approved make list .NSR |
| 114 | Providing and fixing of Pillar Cock Auto Closing System complete in all respects Make Jaquar Model no.PRS-CHR-031 or equivalent make model of approved make as per approved make list .NSR |
| 115 | Providing and fixing of COUNTER WASH BASINS OVAL Shaped Snow White of size 460 x 360 x 150 mm complete in all respects Make Cera Model Cat. No. S2030102 or equivalent make model of approved make as per approved make list .NSR |
| 116 | Providing and fixing of CP cup (heavy duty) 15mm i/d of approved make complete in all respect. .NSR |
| 117 | Providing and Fixing of Hi flow water filter with cum-purifier including installation charges 3 Ltrs./Minute. .NSR |
| 118 | Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: .NSR |
| 119 | Up to 150 mm diameter . |
| 120 | Providing anf Fixing grab Rail of Size 32mm Stainless steel in handicapped Toilet complete in all respect .NSR |
| 121 | Construction of curb with CC 1:2:4 along with upto 1.00 depth for made it proof water including cost of sand, bajri complete in all respect. .NSR |
| 122 | Providing and Fixing of Bottle Trap (with Internal Partition) 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange of make Jaquar ALD-CHR-769L300X190 / Grohe / Kohler complete in all respect. .NSR Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender