Tender For Construction Of Community Halls
Tender Value
71.99 Lakhs
Estimated cost
Bid Submission
31 Oct 2026
14 days left
EMD
1.22 Lakhs
Bank guarantee accepted
Document Fee
1770
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanniyakumari → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Community Halls
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling and removal of R.R. masonry/brick masonry/ plain cement concrete work, etc. height upto 4.5m and dumping the debris within a lead of 500m by means of manually/mechanically, etc. complete as per specification and as directed by the Engineer-in-charge. |
| 2 | Dismantling and removal of RCC foundation/ column/ slab/beam, etc. in all heights upto 4.5m including all necessary scaffolding and dumping the debris within a lead of 500m by means of manually / mechanically, etc., complete as per specification and as directed by the Engineer-in-charge. |
| 3 | Earthwork excavation for foundation in all types of loose/hard soil and depositing the spoils with an initial lead of 20m and lift upto 2m including refilling etc. by means of manually/ mechanically complete as per specification and as directed by the Engineer-in-charge. |
| 4 | Supplying and filling of gravel of approved quality above the earth surface with watering, levelling works, compaction and consolidating, including necessary anti-termite treatment, etc. by means of manually/ mechanically complete as per specification and as directed by the Engineer-in-charge. |
| 5 | Supplying, providing and laying soling stone 230mm thick over the existing sub base/sub grade including levelling and consolidation to form a compact surface using hard blue granite soling stone with hand packing, wedging them tightly and filling the voids with loose sand, watering and sweeping the sand into the joints so that the hole is formed as solid mass, etc. complete as per standard specification and as per the direction of Engineer-in-charge. |
| 6 | Supplying, providing and laying PCC 1:4:8 mix for foundation/ flooring work using 40mm and below grade hard blue granite jelly including all form works, mixing, laying, compaction, consolidation and curing, etc. complete as per standard specifications and as directed by the Engineer-in-charge. |
| 7 | Supplying, providing and laying PCC 1:2:4 mix for foundation/ flooring work /kerb wall drainage wall using 20mm and below grade hard blue granite jelly including all form works, mixing, laying consolidation and curing, etc. complete as per standard specifications and as directed by the Engineer-in-charge. |
| 8 | Supplying, providing & laying RR masonry foundation/ wall/ retaining wall in cement mortar 1:6 for construction of wall using hard blue granite stone, etc. complete from 2.5 m below ground level to 4.5m height above ground level with neat finishing including proper pointing & necessary scaffolding work etc. complete as per standard specifications and as directed by the Engineer-in-charge. |
| 9 | Supplying, providing and laying brick masonry in CM 1:6 using well burnt country brick of minimum size 22.9x11.2x7cm for foundation /kerb wall/wall upto 4.5m height from ground level including all scaffolding, staging, curing, etc. complete complying with standard specifications and as directed by the Engineer-in-charge. |
| 10 | Supplying, providing and laying pre-cast concrete kerb stone of minimum size 450x150x300mm laid along the edges of floor / kerbwall /pavements upto 4.5m height from ground level including necessary grouting of joint, all scaffolding, staging, curing, etc. complete complying with standard specifications and as directed by the Engineer-in-charge. |
| 11 | Supplying, providing and fixing twisted reinforcement IS 1786 HYSD bars Fe500D/Fe550D (TMT bars - TATA/ Agni/ JSW) including fabrication, cutting, bending, cold tying, with overlapping to the standard length wherever necessary and placing the reinforcement in position as per the direction of Engineer-in-charge including binding, provision of spacer bars, cover blocks and all other incidental charges, necessary scaffolding, staging, safety arrangements, etc. complete for all RCC works (item No. 12) upto 4.5m height as per standard specification and as per the direction of Engineer-in-charge. |
| 12 | Supplying, providing and laying cement concrete 1:1.5:3 for RCC works height upto 4.5m using 20mm and below grade hard blue granite jelly with specified reinforcement (rate excluding the cost of reinforcement) and all mixing, laying, compaction, leveling, consolidation and curing, etc., including the cost of centering / shuttering work, necessary scaffolding, staging, safety arrangements, etc. complete as per the specification and as per the direction of Engineer-in-charge. |
| 13 | Supplying, plastering with CM 1:4 mix 15mm thick one coat floated hard & trowelled smooth etc for floors & walls upto 4.5m height with neat finishing and necessary grouting, scaffolding, staging, safety arrangements, etc. and mix with water proofing compound (Sika /Perma), fibre mesh wherever required, etc. complete complying with standard specifications and as directed by the Engineer-in-charge. |
| 14 | Supplying, plastering with CM 1:3 mix 12mm thick one coat floated hard & trowelled smooth for RCC beam, column, ceiling, wall & floor upto 4.5m height with neat finishing and necessary grouting including all scaffolding, fibremesh wherever required, etc. complete complying with standard specifications and as directed by the Engineer-in-charge. |
| 15 | Supplying, fabricating and fixing of required size ISI standard [YST 310 grade] heavy type GI round / square/ rectangular pipe (Jindal /Kalinga) at all heights for roof truss, side cladding, shed, gate & partition, etc. including cutting, welding, grinding with necessary MS foundation bolt of size M16 Dia and 500 mm depth for placing with encasing/pocket hole with required template & 12mm thick base plate at bottom (foundation) and top 10mm thick base plate (joint area of GI pipe and roof truss) including proper binding/welding, grouting of foundation bolts with neat finishing etc. and painting the pipe with two coat with 1st quality epoxy smoke grey paint of approved shade (Asian / Berger/Nippon) over a coat of epoxy zinc-chromate/ zinc-phosphate primer (Asian/ Berger/ Nippon), including necessary scaffolding, safety arrangements, etc. complete as per specification and as per the direction of Engineer-in-charge. |
| 16 | Supplying, providing and fixing of roof sheet with 0.47mm thick powder coated sheet/ powder coated end curved / plain sheet [TATA - Durashine/JSW colouron+ (blue/red/grey)] at all heights with riveted joint/necessary fixing arrangements to suit the existing M.S. angle / channel, purlin, GI pipes, etc. including necessary ridges, UPVC rain water gutter around the shed, scaffolding, safety arrangements with all conveyance charges, loading/ unloading charges, etc. complete as per standard specification and as directed by Engineer-in-charge. (Minimum required overlapping is 15cm). |
| 17 | Supplying, fabricating and fixing of required size ISI standard GI TATA Structura pipes Square/ Rectangular/ Circular of thickness 2mm-10mm for roof, side cladding, shed, upto 15m height etc. including cutting, welding, grinding, bolt arrangements with neat finishing and necessary scaffolding, safety arrangements, etc. complete as per specification and as per the direction of Engineer-in-charge. (YST 310 grade- Square & Rectangular: IS: 4923 & Circular: IS: 1161/ IS3601). |
| 18 | Supplying, providing and fixing of roof sheet with 2.8mm to 3.00mm thick UPVC corrugated/ trafford/ trapezoidal roof sheet (Loyid /Tetto Colour/Sun-Arch/Sky Tech) Colour (blue / green / white / red/grey) at all heights with UPVC self-drilling screws with end cap are heavy-duty fasteners (2 nos. per m) to suit the existing M.S. angle /channel, purlin, GI pipes (for fixing bolt hole to be made with drilling machine only), including fixing the screw top covering with grease and end cap with necessary UPVC roof ridges including UPVC rain water gutter around the shed with necessary fitting, etc. and scaffolding, safety arrangements with all conveyance charges, loading/ unloading charges, etc. complete as per standard specification and as directed by Engineer-in-charge. (Minimum required overlapping is 15cm). |
| 19 | Supply of paints and painting two coat with emulsion paint (Asian / Berger/Nippon) of approved shade for the surface of the buildings over a coat of wall primer (Asian, Berger, Nippon) upto 15m height from ground level, including thorough scrapping, cleaning, removal of dirt of existing surface, all tools & tackles, sandpaper and scaffolding arrangements, and applying crack filler/wall putty touch-up works wherever required etc. complete as per specification and as directed by the Engineer-in-charge. |
| 20 | Supply of paints and painting two coat with 1st quality enamel / touch wood paint of approved shade (Asian/ Berger/ Nippon) matching to the existing for all doors, windows, false ceiling, pipes etc. over a coat of wood sealer/primer and putty wherever required including thorough cleaning and removal of dirt and necessary scaffolding arrangements, upto 15m heights, etc. complete as per specification and as directed by the Engineer-in-charge. |
| 21 | Supplying and fixing of 6kg PVC collecting pipe (110mm dia) (Finolex /Ashirvad) at the end of rainwater collecting bowl with suitable powder coated clamps (2-5mm thick) and necessary fittings elbow, bend, coupling, solvent cement, scaffolding arrangements, etc. complete as per the direction of Engineer-in-charge. |
| 22 | Supplying, providing and laying with 9mm thick vitrified-Marbonite double charge/matte finish tiles of size 1200mmx 600mm (Kajaria/ Somania /Qutone brand) with Cement Mortar 1:2 and pointing, (apply spacer joint, epoxy joint-wherever required) including finishing the joint and pointing flush with the surface, etc. complete as per specification and as directed by Engineer-in-charge. |
| 23 | Supplying, providing and finishing the floor with 9mm thick Anti-skid ceramic tiles (Somania/ Kajaria/ Qutone make) of size 300mm x 300mm of approved quality and shade in CM 1:3 thick and pointing the tiles with matching colour cement, etc. complete as per the direction of the Engineer-in-charge. |
| 24 | Supplying, providing and fixing 50/60mm thick coloured (red / yellow/black/Grey) square /Zig-zag/ Hexagon/ Rectangle shape concrete paver block of size 200x100mm/ 150x300mm/ 250x100mm/ 200x120mm/ 220x270mm/ 200x200mm pattern floor, bottom laying with 6mm jelly of 50mm thick over the earth surface including levelling the earth surface with neat finishing, side packing etc. complete as per the specification and as per the direction of the Engineer-in-charge. |
| 25 | Supplying, providing, laying and fixing of Stainless Steel hand rails for staircase using square/circular of size 50mm 304L Grade Stainless Steel pipe (top & vertical pillar) of 1.4mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.4mm thick welded to the railing (3 rows c/c & vertical supports with necessary space) and the supports will be grouted into the surface area with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, etc. complete as per the standard specifications and as per the direction of Engineer-in-charge. |
| 26 | Supplying, providing, laying and fixing electrification concealed (polythene pipe)/open point with required wire (make: Finolex/ Havells / Polycab), switch box (metal box-Legrand) switches (Make: Hi-fi) & 16Ams socket with all required necessary fittings including chipping, routing, clamping and all other incidental charges, etc. complete as per the specification and as per the direction of Engineer-in-charge. |
| 27 | Supplying, providing and fixing of Led tube light 22W (Havels/ Wipro Garnet) with all required necessary fittings etc. complete as per the specification and as per the direction of Engineer-in-charge. |
| 28 | Engagement of Artist for artistic work in the furniture/ gates/ name board/building wall, etc. including scrapping & cleaning the surface and marking, etc. complete as directed by the Engineer-in-charge. |
| 29 | Engagement of Fitter for miscellaneous works complete as directed by the Engineer-in-charge. |
| 30 | Engagement of Mason for miscellaneous works complete as directed by the Engineer-in-charge. |
| 31 | Engagement of labour (Mazdoor) for miscellaneous work complete as directed by the Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender