Tender For Special Repairs Of Est Early Intervention Centre (Eic) Against (Job No.81 Sa/Btd/Sr (Bldg)-26/2026-27) Under Ge South At Bathinda Mil Stn
Tender Value
80.16 Lakhs
Estimated cost
Bid Submission
17 Nov 2026
30 days left
EMD
1.45 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs Of Est Early Intervention Centre (Eic) Against (Job No.81 Sa/Btd/Sr (Bldg)-26/2026-27) Under Ge South At Bathinda Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exc 1.5 Sqm each as doors, windows and ventilators and removal from site complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 Sqm each each as doors, windows and ventilators and removal from site complete all as specified and directed. |
| 3 | Supply & Fixing Factory made single extruded WPC ( Wood Polymer Composite ) Solid Door Frame / Chowkhat of Size 45mm x 70 mm comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder / Rice husk / Wheat husk ) and non toxic additives (maximum toxcity index of 12 for 100 gms ) fabricated with miter joints after applying PVC Solvant cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg /cum and screw withdrawl strength of 2200 N (face ) & 1100 N (Edge) minimum Compressive strength of 58 N /sqmm modulus of elasticity 900 N/Sqmm and resisitence to spread of flame of class A category with property of being termite / borer proof , water moisture proof and fire retaident and fixed in position with and including MS hold Fast lugs / SS Dash Fastner of required dia and length with and including Supply and Fixing (03 Nos Per Frame ) 100 mm long SS Butt Hinges complete all as specified and as directed by Engineer-in- charge. |
| 4 | Supply & Fixing Factory made single extruded WPC ( Wood Polymer Composite ) Solid Plain flush door shutter of 30 mm thick , size comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder / Rice husk / Wheat husk ) and non toxic additives (maximum toxcity index of 12 for 100 gms ) having minimum density of 650 kg /cum and screw withdrawl strength of 1800 N (face ) & 900 N (Edge) minimum Compressive strength of 50 N /sqmm modulus of elasticity 850N/Sqmm and resisitence to spread of flame of class A category with property of being termite / borer proof , water moisture proof and fire retardant and with and including Supply & Fixing of 02 Nos (per Leaf) SS 150mm long Tower Bolt, Supply & Fixing of 02 Nos (per door) SS 300mm long Sliding Bolt with and including Supply & Fixing of 02 Nos (per Leaf) Stainless Steel 150mm long handle complete all specified and directed by Engineer -in-charge. |
| 5 | Material and labour Providing and fixing factory made uPVC white colour fixed window/ventilator made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : 5mm thick glazing with selected quality glass.(Note: The unit rate quoted by contractor excludes cost of glass and Wire mesh and includes all other connected accessoriesNet opening will be measured for payment purpose.). Area not exceeding 1.00 Sqm each |
| 6 | Providing and fixing factory made uPVC white colour Sliding window Three track area n exc 2.00 sqm made of extruded profiles with wall thickness of 2.3mm (+-0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm). Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+-0.2mm thick galvanized steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware (Touch Lock of zinc alloyed (white powder coated), steel roller system, Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm and required accessories. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose). |
| 7 | Supply & Fixing Galvanised MS wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks to Galvanised MS wire staple complete all as specified and as directed by Engineer-in-charge. |
| 8 | Supply & fixing 4.0 mm thick Figured glass pin head type and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed |
| 9 | Material and labour for Providing and fixing aluminium work with Polyester powder coated aluminium ( minimum thickness of polyester powder coating 50 micron for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conformikng to IS:733 and IS :1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions i.e at top , bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth , rust free, straight, mitred and jointed mechanically wherever required including aluminium cleat angle, aluminium snap beading for glazing/ paneling , C.P. brass/ stainless steel screws, all complete all as specified and directed by Engineer-in-charge .Note :- (i) Weight of aluminium sections , aluminium cleat angles , aluminium butt hinges, aluminium handles , aluminium tower bolts , aluminium peg stays & aluminium snap beading shall be physically ascertained through a board of officers convened by GE and payment shall be made only after ascertaining the actual weight of aluminium at site.(ii) The rate of material and labour for providing the EPDM rubber, neoprene gasket , C.P. brass / stainless steel screws are included in this item and nothing shall be paid extra on this account. (iii) During considering the weight of aluminium sections , aluminium cleat angles , aluminium butt hinges, aluminium handles , aluminium tower bolts , aluminium peg stays & aluminium snap beading , the weight of EPDM rubber, neoprene gasket , C.P. brass/ stainless steel screws shall not be considered for measurments and payments. Only the weight of the aluminium sections , aluminium cleat angles, aluminium butt hinges, aluminium handles , aluminium tower bolts , aluminium peg stays & aluminium snap beading shall be considered and measurment and payment shall be made accourdingly.(iv) During the weight of aluminium sections , aluminium cleat angles , aluminium butt hinges, aluminium handles , aluminium tower bolts , aluminium peg stays & aluminium snap beading ,the weight of polyester powder coating 50 micron shall not be considered for weight but the rate of material and labour for providing polyester powder coating 50 micron is included in this item and nothing shall be paid extra on this account. (v) Glazing /Paneling and wire mesh shall be measured and paid seperately. (v)The board shall be duly countersigned by GE shall enclosed with Final Bill . |
| 10 | Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (fittings shall be paid separately) with extruded built up standard tubular sections/appropriate Z section and other section of approved make confirming to IS:733 and 1285,fixing with dash fasteners of required dia and size including filling neccessary the gaps at junctions ie, at top, bottom and sides with required EPDM rubber / neoprene gasket etc, handle 02 Nos in each door, 03 Nos hinges in each lief, 01 aluminium sliding door bolt in each door Aluminium sectoins shall be smooth, rust free, straight, according to IS:1868 with minimum anodic coating of grade AC 15 of approved design and pattern with approved standard section and fixed to existing window frame with op brass and stainless steel screw @ 200mm centre to centre including cutting the grill to proper opening size for fixing and operation of handle and fixing approved anodised aluminium strandard section around the opening all complete as per requirement and directions of Engineer-in-charge |
| 11 | Material and labour Anodised aluminium grill (anodised transparent of dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. |
| 12 | Supply & fixing in repair Door closer hydraulically regulated,aluminium (die cast) body designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed by Engineer-in- charge. |
| 13 | Supply and fixing in repair Mortice lock 4 levers , vertical type, size 100 mm alumunium , etc complete all as specified and directed by Engineer-in-Charge. |
| 14 | Material & Labour 18/19mm Prelaminated particle board, interior grade prelaminated one side with decorative choice lamination & Sqm 10.00 complete all as specified and directed by Engineer-in-charge. |
| 15 | Supply and fixing for tinted glass of selected quality, 4.8 mm thick and glazing with aluminium beading in aluminium door, partition and window shutter complete all as specified and directed by Engineer-in-charge. |
| 16 | Material and labour Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel cover, hearth or wall tiling including cement mortar bedding (but not backing), terrazzo dado/wall tiling and skirting. Sqm 575.00 etc on brick or stone walls etc including racking out joints hacking for key and scrubbing removing serviceable tiles to store and rubbish off the premises etcc omplete all as specified and as directed by Engineer-in-charge.. |
| 17 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the permises etc. complete all as specified and directed by Engineer-in-charge. |
| 18 | Material and labour for Premium 1st quality straight edge,stain free, gloss finish. Square size (Sqaure/rectangular) polished, area of each tile exceeding 0.42 sqm but not exceeding 1.00 Sqm in floors etc. including 10mm thick bedding layer in CM 1:4 using type-I adhesive in approved shade set and jointed with using spacer and approved high polymer modified, grey cement based tile adhesive suitable for fixing medium format tile/stone in walls/floor conforms to IS 15477:2019 type 2T Adhesives for use with ceramic, mosaic and stone tiles\\" Conforms to EN 12004:2017 and is a normal cementitious adhesive (C1) with slip resistance (T) of class and necessary grouting as per manufacturers instructions in floors etc complete all as specified and directed |
| 19 | Material and labour for Premium 1st quality straight edge,stain free, gloss finish. Square size (Sqaure/rectangular) polished, area of each tile exceeding 0.42 sqm but not exceeding 1.00 Sqm in approved shade set and jointed in neat and pointed in white or coloured cement to match as in skirting not 150mm high etc, in any pattern of light or dark tile as approved over and including 10mm thick screed in cement mortar 1:4 complete all as specified and directed |
| 20 | M & L anti slip coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, in floors etc including 10mm thick bedding layer in CM 1:4 using type-1 adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured epoxy grout to match the shade of tile including necessary cutting as per site requirement complete all as specified and directed. |
| 21 | M & L anti slip coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, in Skirting etc including 10mm thick bedding layer in CM 1:4 using type-1 adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured epoxy grout to match the shade of tile including necessary cutting as per site requirement complete all as specified and directed. |
| 22 | Material and labour granite 20 mm thick (of any type) work (table rubbed and polished) in steps, Sqm jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite 10mm thick backing coat in CM 1:4 is including demolition of stone/slab tiles complete all as specified and directed |
| 23 | Material and labour 25mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded stone aggregate) as in levelling course where as rerquired complete all as specified and directed by Engineer-in-Charge. |
| 24 | Dismantling Wall and Ceilling Board (fibre, pulp, Insulation,etc) or Insulation boards/slabs/ blankets any thickness including cover fillets fixed in any position with nails fixed with screws complete all as specified and as directed by Engineer-in- Charge. |
| 25 | Material and labour Anodised aluminium snap grid (Size of grid 605 x 605 mm) frame work for false ceiling including hangers 6mm dia G.I (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5 mm dia 40mm long complete all as specified |
| 26 | Material and labour for 4mm thick non asbestos fibre cement building boarding boarding fixed or laid/inserted to timber/GI/aluminium frame work with screws fixed in ceiling flat or sloping complete all as specified and as directed by Engineer-in- Charge. |
| 27 | Material and labour 12mm thick EVA foam rubber mat inerlocking (600mmx600mm) protective Sqm for flooring manufacturer's instructions complete all as specified and as directed by Engineer-in- Charge. |
| 28 | Demolition of cement concrete reinforced of any discription and in any position, including reinforcement cut as required to facilitate complete all as specified and as directed by Engineer-in-charge.The weight of scrap iron for schedule of credit shall be ascertain by BOO as ordered by GE.The copy of BOO duly countersinged by GE shall be enclosed with final Bill. |
| 29 | Supply and fixing for fabricating & fixing modular cabinet bottom unit, over head Sqm wall unit, loft unit, shelves etc) made out of Sqm 20.00 thick WPC board minimum density 600 kg/cum, including fixing with solvent cement adhesive and screw to form modular kitchen cabinet/cupboard shutters and fixing to wall using rawl complete all as specified |
| 30 | Supply and fixing 1mm thick glossy sunmic sheet white colour or approved by Sqm GE on external face of shutter and drawer face and on exposed edges (lipped all around exposed surfaces) using adhesive and bonding material as per manufacturer 30 Supply and fixing 1mm thick glossy sunmica sheet white colour or approved by GE on external face of shutter and drawer face Sqm instructions complete all as specified and directed. |
| 31 | Supply and fixing 0.725 mm thick matt finish sunmica sheet white colour or Sqm approved by GE on internal face of shutter and drawer face using adhesive/bonding material as per manufacturer instructions complete all as specified and as directed by Engineer-in- Charge. |
| 32 | Supply only soft closing/self concealed hinges (cabinet hinges) full Each overlay, opening angle 105 degree, made of stainless steel (SS 304 grade), nickle plated finish complete all as specified |
| 33 | Supply only soft closing/self closing Telescophic channel (drawer slides or drawer Each runners) galvanised steel zinc coating suitable for minimum 35 Kg weight (Depth of drawer 510mm and 150mm height) complete all as specified and as directed by Engineer-in- Charge. |
| 34 | Supply and fixing Ball catches with 8mm dia steel ball, and brass body and Each striking plate including letting in and fixing complete all as specified and as directed by Engineer-in- Charge. |
| 35 | Supply only stainless steel cabinet/drawers handle having a length of 200mm, SS Each 304 grade, nickle finish fancy type complete all as specified and as directed by Engineer-in- Charge. |
| 36 | Supply and fixing 6mm thick WPC board on back side of carcase including fixing Sqm material complete all as specified and as directed by Engineer-in- Charge. |
| 37 | Supply and fixing 100mm long aluminium anodised hasp & staple, safety type with hinges pin Each including bolt to plate fixed with and including SS screws complete all as specified and directed |
| 38 | Supply only aluminium black frame profile 45mm width complete all as specified and as directed by Engineer-in- Charge. |
| 39 | Supply and fixing 5mm thick tinted glass fixed with silicon on aluminium profile as Sqm kitchen cabinet (over head wall unit) shutter complete all as specified and as directedNote:- Aluminium black frame profile and soft close hinges shall be measured and paid separately as supply only but labour for fixing the same and other minor items not otherwise described shall be deemed to be included in the unit rate quoted. |
| 40 | Material and labour Brickwork with sub class 'B' old size burnt clay bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed by Engineer-in-charge. |
| 41 | Material and labour for RCC (1:2:4) type B1 using 20mm aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, lintel, fins, facia, spiral staircase and in shelves and the like including formwork complete all as specified and as directed by the Engineer-in-Charge. |
| 42 | Material and labour for mild steel TMT bars 6 to 8mm dia and over cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by the Engineer-in-Charge. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.) |
| 43 | Supply and fixing in repair powder coated tempered aluminium frame of grade 6063 kg fixed to wall suitable framework for fixing ACP Kg sheet complete all specified.Note:- Work may be executed upto 4 storey bldgs |
| 44 | Supply and fixing in repair Prepainted aluminium composite panel 3mm thick exterior grade Sqm fixed to vertical surface (horizontal or vertical Som direction) with typical runners and cleat fixing system of approved make for external, column/canopy and complete weather ceiling the surface will be furnished with PVDF coating thickness as per manufacturers standard (in FR Grade-Fire Ferr on top side and service coating on reverse side. Coa mechanical properties of panel as per detailed specification. The system shall be fixed usig Gi brackets and stainless stee reverse side Coating shall confirm to specification of ECCA/AAMA and all other necessary accessories. The brackets support shall be rate med ass per manufacturers specification and shall with stand to wind pressure. All hardware shall be corrosion resistant malte include sealing, sealing shall be done by using weather resistant silicon of dow confirming 789 or approved equivalent executed unto 4 Bldgs |
| 45 | Supply & fixing Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified & directed by Engineer-in-charge. |
| 46 | Material and labour PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filing in bed Cum block of hold fast etc complete all as specified |
| 47 | Material and Labour for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over with and including one coat of red oxide zinc chrome primer complete all as specified and as directed by Engineer-in-charge. |
| 48 | Supply and Fixing 20 mm bore CPVC pipe SDR 11and plain CPVC SDR 11 fitting with all fitting and fixed to walls & ceilings or laid in floors, including taking down unservicable existing GI tubing of 20mm bore and fittings complete complete all as specified and as directed by Engineer-in-charge. |
| 49 | Supply and Fixing 25 mm bore CPVC pipe SDR 11and plain CPVC SDR 11 fitting with all fitting and fixed to walls & ceilings or laid in floors, including taking down unservicable existing GI tubing of 20mm bore and fittings complete complete all as specified and as directed by Engineer-in-charge. |
| 50 | Supply and fix in repairs gun metal gate valve of 20 mm dia bore size (IS -778) Class 1 with iron wheel head, screwed inside, non-rising stem, complete all as specified and directed. |
| 51 | Supply and fix in replacement gun metal gate valve of 25 mm dia bore size (IS -778) Class 1 with iron wheel head, screwed inside, non-rising stem, complete all as specified and directed. |
| 52 | Supply and fixing in replacement bib taps cast copper alloy with crutch or butterfly handle , screwed down , chromium plated screwed for iron pipe or brass ferrul for 15MM bore dia pipe complete all as specified and director. |
| 53 | Supply and fixing in replacement angular stop valve/cock, cast copper alloy chromium plated, with flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15mm bore pipe, in repair complete all as specified and directed by Engineer-in-charge. |
| 54 | Supply & fixing in replacement chromium plated shower rose 125mm size, with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed by Engineer-in-charge. |
| 55 | Supply and fixing in repair 15mm bore Stop valves, fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for iron pipe or for brass ferrule complete all as specified & directed by Engineer-in-charge. |
| 56 | Supply and fixing 15mm bore, brass Chromium Plated wall mixer for mixing hot & Each cold water screwed down for iron pipe complete all as specified & directed by Engineer-in-charge |
| 57 | Supply and fixing in repair 15mm bore, Brass Chromium Plated central hole Each basin mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and as directed by Engineer-in-charge |
| 58 | Supply and fixing 15mm bore Brass Chromium Plated sink mixer for mixing hot & Each cold water screwed down from iron pipe and Each Engineer-the-chaing spout (wall mounted model) with connecting legs & wall flanges complete all as specified and as directed by Engineer-in-charge |
| 59 | Supply and fixing in replacement sink with drainage board made of stainless Each steel 1 mm thick kitchen or laboratory with plugs, Each washers and wastes: rastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by Engineer-in-charge |
| 60 | Supply and fixing in repairs Stainless Steel plate rack of size 900mm x 600mm x 250mm and thickness of Staineless Steel strip Each 1.00 of 1mm fixed on wall etc complete all as specified and as directed by Engineer-in-charge |
| 61 | Supply and fixing in repairs Vitreous china premium/1st quality wash down water closed wall hing EWC white (closed pattern including all necessary accessories like rag bolts / gel gasket etc (excluding flushing cisern and flushing pipe) including connection drain etc, including plastic water closet seat with cover (white colour) closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device including stainless steee chromium plated jet spray with 1.0 mtr long pvc pipe with cp connector and necessary nut bolt with CP screws and plug for fixing WC all as specified |
| 62 | Supply and fixing concealed flushing cistern of PVC 10 litre capacity with dual flushing cistern, valve action type with inlet outlet Each type 3.00 ball valve, float and including brackets and connection to pipe etc and incl Supply and fixing of all necessary accessories / installation kit and 'S' type drain pipe connection set for wall hung WC etc as recommended by manufacturer for fixing packing and including Supply and fixing of actuator knob/flush plates and taking down existing cistern of any description/size complete all as specified. |
| 63 | Supply and fixing in repair vitreous China wash hand basin counter top of any WBH of size 565x425x140 Each mm white including CP waste coupling complete all as specified and directed |
| 64 | Supply and fixing in repair Health faucet (ABS body) mild steel chromium plated suitable for Each 15mm dia pipe with 1.25 mtr long flexible tube Each 3.00 in chrome finish and wall hook including making connection and fixed in position complete in all respect all as specified and directed |
| 65 | Supply and fixing in repair, water jet for EWC chromium plated with PVC connection complete each all as specified and directed |
| 66 | Supply and Fixing Brass chromium plated bottle traps for wash basins with inlet and outlet including necessary packing, union and cap and fixed in 32mm 1 in 32mm bore of trap complete all as specified and as directed by Engineer-in-charge. |
| 67 | Supply and fixing toilet paper holder of chromium plated with falt recessed type stainless steel\\"fixid to walls with chromium plated(cp) brass screw complete all as specified and directed |
| 68 | Supply and fixing in repair PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality |
| 69 | Supply and fixing in repair brass chromium plated tubular towel rail, 20mm dia D type 60 cm long between flanges complete all as specified and directed |
| 70 | Supply and fixing chromium plated soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed |
| 71 | Supply and fixing 125mm dia grating with/without waste hole of PTMT including circular cutting on tiles etc complete all as specified and directed |
| 72 | Supply and fixing looking mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and moulding/wooden fillets (cross sectional area exc 6 sqcm & n.exc 13 Sqcm) on top side around edges including necessary screws and cup washers and fixing to wall with suitable hanging/fixing arrangement of any size each exceeding 0.50 sqm complete all as specified and directed |
| 73 | Supply and fixing PTMT mirror cabinet of size 600mm x 450mm best quality confirming to sample kept in GE's office complete all as specified |
| 74 | Supply and fixing in repairs corners glass shelf (25cm/30cm) chromium plated brass bracket & railing etc complete all as specified and directed |
| 75 | Supply and fixing in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass self 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed |
| 76 | Supply & Fixing in repairs Rotational moulded poly-ethylene three layer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity,hoisted and fixed in position and including dismantling water tanks and removing to store all as specified and directed. |
| 77 | Supply and Fixing in repair Ball valve high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of size 20 mm bore (minimum weight 20mm-210 gram) complete all as specified and as directed by Engineer-in- charge. |
| 78 | Material and Labour for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for Internal dia of pipe in 150 mm complete all as specified and as directed by Engineer-in-charge. |
| 79 | Dismantling and disconnecting of existing CI soil vent pipe 100mm bore fixed to wall, laid in trenches including all fitting & accessories complete all as specified and as directed by Engineer-in-charge. |
| 80 | Dismantling and disconnecting of existing CI soil vent pipe 75mm bore fixed to wall, laid in trenches including all fitting & accessories complete all as specified and as directed by Engineer-in-charge. |
| 81 | Supply and fixing 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls and fixing with clamps complete all as specified and as directed by Engineer-in-charge. |
| 82 | Supply and fixing 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls and fixing with clamps complete all as specified and as directed by Engineer-in-charge. |
| 83 | Supply and fixing 110mm bore of PVC (SWR) bends, junction, tee and Y (any radius) repair complete all as specified and as directed by Engineer-in-charge. |
| 84 | Supply and fixing 75 mm bore of PVC (SWR) bends, juntion, tee and Y (any radius) diminishing pipe or tappers (long bore measured) with oval access door in repair complete all as specified and as directed by Engineer-in-charge. |
| 85 | Supply and fixing 110 mm dia of long neck PVC (SWR) P trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 in repair complete all as specified and as directed by Engineer-in-charge. |
| 86 | Supply and fixing 75 mm dia of long neck PVC (SWR) P trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 in repair complete all as specified and as directed by Engineer-in-charge. |
| 87 | Supply & Fixing Branch pieces, PVC SWR Type B single 110 mm bore, equal or unqual, (Y, T, etc) complete all as specified and as directed by Engineer-in-charge. |
| 88 | Supply and fixing 75mm bore Cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and as directed by Engineer-in-charge. |
| 89 | Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed by Engineer-in-charge. |
| 90 | Material and labour for Rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing even & smooth but without using extra cement complete all as specified and as directed by Engineer-in-charge. |
| 91 | Material and labour for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces and finishing even & smooth but without using extra cement complete all as specified and as directed by Engineer-in-charge. |
| 92 | Material and labour for rendering 10 mm thick in cement mortar in (1:3) on ceiling and finishing the surface even & smooth without using extra cement complete all as specified and directed. |
| 93 | Material and labour for preparation of new plastered internal wall surface and applying putty 1mm thickness over plastered surface to prepare the surface even and smooth including two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gm/ltr of approved manufacturer of required shade and colour complete as per manufacturer specification |
| 94 | Material and labour for complete removal of existing treatment on old plastered wall surface and applying putty 1mm thickness over plastered surface to prepare the surface even and smooth including two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gm/ltr of appro manufacturer specification approved manufacturer of required shade and colour complete as per |
| 95 | Material and labour for preparing newly plastered or unplastered surface of ceiling and applying three coats of white wash complete all as specified & directed by Engineer-in- charge. |
| 96 | Material and labour for preparing old plastered or unplastered surface of ceiling and applying two coats of white wash complete all as specified & directed by Engineer-in- charge. |
| 97 | Material and labour for preparation fo new palstered wall surface and finshing wall with two coats of Acrylic smooth exterior paint of required shade : (applied @ 1.67 ltr / 10 sqm over and including priming coat of exterior primer applied @2.20 kg / 10Sqm complete all as specified and as directed |
| 98 | Material and labour for complete removal of existing treatment on old palstered wall surface and finshing wall with two coats of Acrylic smooth exterior paint of required shade : (applied @ 1.67 ltr / sqm over and including priming coat of exterior primer applied @2.20 kg / 10Sqm complete all as specified and as directed |
| 99 | Demolition of cement concrete (unreinforced) of any description & in any position not otherwise specifically provided for ,complete all as specified and directed. |
| 100 | Material and labour Water proofing treatment to sunken floor using acrylic base multipurpose polymer. The treatment shall be carried out as per manufacturers specifications. The treatment shall be include of following elements also:- (i) Surface preparation of substrate by removing all traces of contaminated loose and friable particle, cement laitance oil and grease, water repellent coating etc. (ii) Injection grouting using cementitious grout if required. The payment for injection grouting shall be made separately etc. (iii) Repair to substrate filling of blow holes/voids and surface levelling using appropriate products specified by the manufacturers (iv) All intersections of horizontal and verticle surface should be profiled with a mortar fillet of min 25mmx25mm (v) The moisture content of substrate shall be checked before application of first coat of waterproof coating at the 200gm/sqm followed brush topping at 450g/sqm per mm. The second coat shall be reinforced with glass fabric between the first and second coat. (vi) The treatment shall be protected of polimer modified cement mortar of 10mm thickness applied at the rate 50m per mm |
| 101 | Material and labour for Aerated Autoclaved Concrete (AAC) blocks work according to Indian Standard Specification IS:2185 (Part-3)-1984 and latest revision built in Cement and sand mortar 1:6 with Aerated Autoclaved Concrete (AAC) blocks straight or curve on plan exceeding 6mtr Mean radius as in sunken floor complete all as specified and directed by Engineer-in-charge |
| 102 | Taking down carefully existing copper/Aluminium point wiring (light,fan, socket or power) complete including fixture and fittings such as switches, bell pushes, ceiling roses, pendents, regulaators, sockets, light fitting, call bells etc removing material to store for keeping in safe custody and to be deposited at E/M store of AGE E/M-IV (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc to match existing color complete all as specified and directed |
| 103 | Material and labour point wiring for one light / fan point controlled by 6 amps one way modular switch switch with 1.5 Sqmm PVC insulated, unsheathed multi strand copper conductor cable FR-LSH in and including concealed PVC conduit 25 mm dia heavy duty ISI marked, steel terminal sunken boxes and 3 mm thick phenolic laminated sheet top cover for sunken boxes flush to surface for one light point/fan point, controlled by one switch on the same board with other switch or independent including cutting, chasing the surface and then making good the same in CM (1:3) complete all as specified and directed by Engineer-in-charge. (Note:- Switches, sockets etc shall be measured and paid for separately under items of Schedule). |
| 104 | All as per srl item item no.103.00(here-in-before) but one 3 pin socket outlet 6amp on same board point, complete all as specified and directed. |
| 105 | All as per srl item item no.103.00(here-in-before) but one 3 pin socket outlet 6amp on the independent board point, complete all as specified and directed. |
| 106 | All as per srl item item no.103.00(here-in-before) but for 15/16 Amp socket outlet by using 2.5 Sqmm PVC insulated unsheathed copper conductor cable FR-LSH multi strand on independent board including provn of 2.5 Sqmm unsheathed, multi stranded copper conductor cable FR-LSH continues as earth wire connected to earth dolly etc, complete all as specified and directed. |
| 107 | Supply and fixing Modular Switch one way 6A/10A 1 module single pole complete all as specified and directed. |
| 108 | Supply and fixing Modular Switch one way 16A 1 module single pole complete all as specified and directed. |
| 109 | Supply and fixing socket outlet modular type, multipurpose,2/3 pin,single pole one way ,6amp two module, 230 volt complete all as specified, |
| 110 | Supply and fixing socket outlet modular type, multipurpose,2/3 pin,single pole one way ,6/16 amp two module, 230 volt, complete all as specified, |
| 111 | Supply and fixing of Modular Fan step regulator, 120w-2 module with 5 steps types complete all as directed. |
| 112 | Supply and fixing in replacement SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 240 volt of 20 Amp, 'C' curve 10 KA breaking capacity and flush to wall including all cutting & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed |
| 113 | Taking down old unserviceable and Supply and fixing in replacement of 4 feet long LED tube light fittings, 22 Watt of cool white / warm comprising of batten with extruded aluminium housing/polycarbonate environmental friendly, energy efficient ready to use pack with all accessories internally prewired and connecting up with twin core twisted copper conductor cable of suitable size including taking down old fitting complete all as specified and as directed by Engineer-in-Charge |
| 114 | Taking down old unserviceable and Supply and fixing of Bed side lamp wall mounted with provn of holder lamp 5 watt 220V AC, efficacy not less than 90 lumen/watt with high efficiency PMMA diffusor soft glare free light complete and integrated inbuilt driver, holders, LED lamps etc including making connection complete all as specified and directed |
| 115 | Supply and Fixing LED Panel Light fitting recessed mounted,square shaped of size 595mm x 595mm x 65mm , 36 (±10%) watt, efficacy not less than 90 lumen/watt , extruded Aluminium/polycarbonate, PC diffusor and inbuilt driver complete as per manufacturer's instructions with and including connection with flexible twin core copper cable of size 23/.00076 from ceiling rose to fitting complete all as specified and as directed by Engineer-in- charge. |
| 116 | Supply & Fixing LED light fitting Decorative mirror type 2 ft long, 10 watt 230V, AC , with high out put diffuser with drive holder and with and including tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to light fitting complete all as specified and as directed by Engineer-in- charge. Please Enable Macros to View BoQ information |
| 117 | Supply & Fixing LED light fitting Decorative mirror type 2 ft long, 10 watt 230V, AC , with high out put diffuser with drive holder and with and including tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to light fitting complete all as specified and as directed by Engineer-in- charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 30 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 33 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender