Tender For Repair And Maintenance Of Furniture For Jcos/Ors Md Accn Including Painting And Polishing In North Zone Under Ge (N) Binnaguri.
Tender Value
35 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
0 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalpaiguri → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Furniture For Jcos/Ors Md Accn Including Painting And Polishing In North Zone Under Ge (N) Binnaguri.
BOQ
| Sl. No. | Item Description |
| 1 | Almirah Medium Steel(Drg No. FD-1032) |
| 2 | M&L taking out loose leg (right/left) and re-fixing the same in existing position including welding of MS Sheet of 1mm bottom size leg with necessary run welding, repair of top, bottom, side (left/right) etc and make it serviceable condition, complete all as specified and as directed. |
| 3 | Taking out the old damaged bottom leg (right/left) and S & F new bottom leg made out of 1mm thick plain MS Sheet as per existing shape and size fixed to the same position by run welding including applying one coat of redoxide zinc chrome primer, complete all as specified and directed. |
| 4 | M&L repair of existing loose shelf of Almirah steel and make it serviceable by providing new chips, nut & bolts etc of existing size as required or spot welding, complete all as specified and directed. |
| 5 | M&L Repair of existing loose hinges by spot welding and make it functional by providing new steel pin including greasing, removing unserviceable hinges from its existing position and S&F new hinges as per existing size, for smooth function complete all as specified and directed. |
| 6 | M&L removing existing unserviceable damaged lock from almirah and S & F new 6 lever steel lock as per existing shape and size with duplicate Keys as approved , complete all as specified and as directed. |
| 7 | M&L taking out old unserviceable handle from Almirah and S & F steel chromium plated handle 125mm long of existing shape and size as approved, complete all as specified and as directed |
| 8 | Repair of existing loose door shutter (right/left) by run welding and make it in serviceable condition, complete all as specified and as directed. |
| 9 | M&L painting to Almirah Steel large on both side (outer/inner surface) including legs, door shutter and shelves with synthetic enamel paint (1st grade quality) by spray machine after cleaning rust/dust and preparation of old painted surfaces including applying ready made putty and redoxide primer wherever required for making good cavities complete all as specified and directed. |
| 10 | CHAIR DINING (Drg No. FD/16(M), FD-279, FD-1105) |
| 11 | Removing old unserviceable Front leg of Chair dining without disturbing to the other parts such as legs, rails, stiffiners etc and supply and fixing with new items of well seasoned hardwood (Teak) and minor repairs if any complete all as specified and shown on drawing. |
| 12 | All as per item Ser No 2.01 above but Rear leg and –ditto- |
| 13 | All as per item Ser No 2.01 above but Seat rails (front / back, both side) and –ditto- |
| 14 | All as per item Ser No 2.01 above but Leg stiffeners and –ditto- |
| 15 | All as per item Ser No 2.01 above but Back rest stiffeners and –ditto- |
| 16 | Taking out and removing unserviceable worn out plastic cane from seat of chair dining and re-canning the same with new white plastic cane of 2mm wide, 0.4mm thick half round (oval type) for weaving and 4mm wide for bordering as per Godrej pattern complete all as specified & as directed and as shown on drawing. |
| 17 | Taking out of unserviceable hard rubber/PVC shoes and S & F new hard rubber/PVC shoes with screws as approved, directed and shown on drawing. |
| 18 | M&L applying French Polish one or more coat till glossy finish achieved to match with existing surface and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specified, directed and shown on drawing. |
| 19 | CHAIR DINING JCO/OR (Drg No. FD/MAP-II/05) |
| 20 | Removing old unserviceable Front leg of Chair dining JCO/OR without disturbing to the other parts such as legs, rails, stiffiners etc and supply and fixing with new items of well seasoned hardwood (Teak) and minor repairs if any complete all as specified and shown on drawing. |
| 21 | All as per item Ser No 3.01 above but Rear leg and –ditto- |
| 22 | All as per item Ser No 3.01 above but Seat rails (front / back, both side) and –ditto- |
| 23 | All as per item Ser No 3.01 above but Leg stiffeners and –ditto- |
| 24 | All as per item Ser No 3.01 above but Back rest stiffeners and –ditto- |
| 25 | Taking out unserviceable worn out PVC seat frame of Chair Dining and S & F new PVC seat frame as per existing shape and size in the same position with suitable screw complete all as specified and as shown in drawing. |
| 26 | S&F in repair new seat stiffener fixed to middle of seat rail made out of well seasoned hard wood timber (size 30 x 25mm) , complete all as specified and as directed. |
| 27 | Taking out old unserviceable hard rubber/PVC shoes and S & F new shoes with screws best quality, complete all as specified and shown on drawing. |
| 28 | M&L applying French Polish one or more coat till glossy finish achieved to match with existing surface and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specified, directed and shown on drawing. |
| 29 | CHAIR EASY (FD/17(M), FD-229) |
| 30 | Removing old unserviceable Front leg of Chair Easy without disturbing to the other parts such as legs, rails, stiffiners etc and supply and fixing with new items of well seasoned hardwood (Teak) and minor repairs if any complete all as specified and shown on drawing. |
| 31 | All as per item Ser No 4.01 above but Rear leg and –ditto- |
| 32 | All as per item Ser No 4.01 above but back frame (top/rear/sides) and –ditto- |
| 33 | All as per item Ser No 4.01 above but bottom frame(front/rear/left/right) and –ditto- |
| 34 | All as per item Ser No 4.01 above but arm rest and –ditto- |
| 35 | Taking out and removing all unserviceable worn out plastic cane from seat and back of chair easy and re-canning the same with new white plastic cane 2mm wide, 0.4mm thick oval type in seat and back by weaving and 4 mm wide for bordering complete all as specified and shown in drawing. |
| 36 | Taking out of old unserviceable hard rubber/PVC shoes and S & F new hard rubber/PVC shoes with screws to the same position complete all as specified and as shown on drawing. |
| 37 | M&L applying French Polish one or more coat till glossy finish achieved to match with existing surface and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specified, directed and shown on drawing. |
| 38 | Chair SCHOOL WITH HAND BOARD (FD/E6/MAP/05) |
| 39 | Taking out old damaged / decayed top from its position and S&F new top made out of 18 mm thick plywood BWR grade with 0.9mm thick sunmica decorative natural teak glossy finish including wooden beading all arround fixed with MS wood screw complete all as specified and as shown on drawing. |
| 40 | Taking out old damaged / decayed PVC back and seat in one piece from its position and S&F new PVC back and seat in one piece fixed with screw, complete all as specified and as shown on drawing. |
| 41 | Taking out old damaged / decayed hollow steel pipe with hinges form its position and S&F (RHS) Hollow steel pipe 25mm dia with hinges, inserted to frame and fixed to frame for slide on rod for adjustment of openable table top, complete all as specified and as shown on drawing. |
| 42 | Taking out old damaged / decayed MS Jalli below the seat and S&F new jali in the same position made out of 3mm dia MS rod complete all as specified and as shown on drawing. |
| 43 | M&L for repair of chair school with spot welding or minor repairs and make it serviceable condition, complete all as specified and as shown in drawing. (Note : Material to be weled not to exceed 2.00mm in thickness) |
| 44 | S&F in repair new rubber/PVC shoes of best quality to the bottom of legs complete all as specified and as shown on drg. |
| 45 | M&L painting of steel frame of chair school with one or more coat of synthetic enamel paint (best quality) after preparation of old steel surfaces including applying one coat of red oxide primer over newly welded surfaces complete all as specified and as shown in drawing. |
| 46 | Chair Verandah(FD/MAP-II/ 15) |
| 47 | M&L spot welding in repairs of broken steel frame complete all as specified and as shown in drawing.(Note : Material to be weled not to exzceed 2.00mm in thickness) |
| 48 | M&L painting of steel frame of chair verandah with one or more coat of white synthetic enamel paint (best quality) after preparation of old steel surfaces including applying one coat of red oxide primer over newly welded surfaces complete all as specified and as shown in drawing. |
| 49 | Taking out old existing damaged / broken seat frame of chair verandah and supply & fix new seat frame complete all as specified and as shown in drawing. |
| 50 | Taking out old existing damaged / broken back frame of chair verandah and supply & fix new back frame complete all as specified and as shown in drawing. |
| 51 | S&F in repair new hard rubber /PVC shoes of best quality complete all as specified and as shown on drawing. |
| 52 | Chair Verandah(FD/256, FD/359) |
| 53 | M&L in repairs to broken steel frame by spot welding complete all as specified and as directed and as shown on drawing.(Note :- Material to be welded not to exceed 2.00mm in thickness) |
| 54 | M&L painting of steel frame of chair verandah with one or more coat of white synthetic enamel paint (best quality) after preparation of old steel surfaces including applying one coat of red oxide primer over newly welded surfaces complete all as specified and as shown in drawing. |
| 55 | Taking out old unserviceable /worn out plastic cane from seat and back of chair verandah and re-canning the same with new white plastic cane 4mm wide 1mm thick half round (oval type) mat pattern as per trade practice complete all as specified and as shown in drawing. |
| 56 | S&F in repair new hard rubber /PVC shoes of best quality complete all as specified and as shown on drawing. |
| 57 | Chair Writing (FD/20(M) FD-280 |
| 58 | Removing old unserviceable Front leg of Chair Writing without disturbing to the other parts such as legs, rails, stiffiners etc and supply and fixing with new items of well seasoned hardwood (Teak) and minor repairs if any complete all as specified and shown on drawing. |
| 59 | All as per item Ser No 8.01 above but Rear leg and –ditto- |
| 60 | All as per item Ser No 4.01 above but Rails (both sides, front/rear and –ditto- |
| 61 | All as per item Ser No 4.01 above but Leg Stiffners and –ditto- |
| 62 | All as per item Ser No 4.01 above but Back rest Stiffners and –ditto- |
| 63 | All as per item Ser No 4.01 above but Arm Rest (left/right) and –ditto- |
| 64 | Taking out and removing old unserviceable worn-out of plastic cane from chair writing and recanning the same with white new plastic cane half round oval type 2mm wide, 0.4mm thick for weaving and 4mm wide for boarding (Godrej Pattern) complete all as specified and as directed and as shown on drawing. |
| 65 | Taking out of all old unserviceable PVC shoes and S & F new hard PVC shoes with screws as approved, complete all as directed and shown on drawing. |
| 66 | M&L applying French Polish one or more coat till glossy finish achieved to match with existing surface and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specified, directed and shown on drawing. |
| 67 | RACK SHOE STEEL (FD/E6/MAP/ II/2(R ) |
| 68 | M&L for repair of rack shoes including spot welding in repairs not exc 2.50cm in length of broken structure complete all as specified and as shown in drawing. (Note : Material to be weled not to exzceed 2.00mm in thickness) |
| 69 | Taking out old damaged / decayed MS Jalli from any shelves and S&F new jali in the same position made out of 3mm dia MS rod complete all as specified and as shown on drawing. |
| 70 | S&F in repair new rubber shoes of best quality to the bottom of leg complete all as specified and as shown on drawing. |
| 71 | M&L painting to complete steel frame of rack shoes by spray machine with one or more coat of Black synthetic enamel paint (1st grade quality) including preparation of old painted surfaces, rectifie the minor repairs if any including applying ready made putty and red oxide primer wherever required complete all as specified and as directed. |
| 72 | STOOL DRESSING (FD-282) |
| 73 | Taking out old damaged / decayed leg from its position and S&F new leg in the same position made out of well seasoned ‘teakwood’ timber applying one coat of French polish over wood filler wherever required complete all specified and as directed and as shown on drawing. |
| 74 | All as per item Ser No 10.01 above but Long Rail and –ditto- |
| 75 | All as per item Ser No 10.01 above but short rail –ditto- |
| 76 | All as per item Ser No 10.01 above but but stiffener and –ditto- |
| 77 | Taking out old unserviceable / worn out plastic cane from seat fixed and re-canning the same with new white plastic cane 2mm wide half round (oval) type best quality for weaving and 4mm wide for bordering (Godrej pattern) complete all as specified and as directed and as shown on drawing |
| 78 | M&L applying French Polish one or more coat till glossy finish achieved to match with existing surface after preparation of surfaces with applying wood filler wherever required complete all as specified & as directed and as shown on drawing. |
| 79 | TABLE BED SIDE (FD/276, FD-248) |
| 80 | Taking out old damaged /decayed leg from its position and S&F new leg in the same position as per existing shape and size made out well seasoned Teak wood’ timber including applying one coat of French polish over wood filler wherever required all as specified, as directed and shown on drawing. |
| 81 | All as per item Ser No 11.01 above but for bottom stiffener and –ditto-. |
| 82 | Taking out old damaged decayed top from its position and S&F newTop made out of 18 mm thick plywood BWR grade with decorative choice lamination on top side and another side applying french polish incl wooden beading all arround complete as specified and as shown on drawing . |
| 83 | All as per item Ser No 11.03 above but for sides (left/right) and –ditto-. |
| 84 | All as per item Ser No 11.03 above but for shelf and –ditto-. |
| 85 | All as per item Ser No 11.03 above but for bottom and –ditto-. |
| 86 | Taking out old damaged decayed ply wood back form its position and S&F new 6mm thick commercial plywood grade BWR in the same position as per existing shape and size complete all as specified, directed and shown or drawing. |
| 87 | M&L applying French Polish one or more coat till glossy finish achieved to match with existing surface after preparation of surfaces with applying wood filler wherever required complete all as specified & as directed and as shown on drawing. |
| 88 | TABLE BED SIDE (FD/E6/MAP/15(R ), FD/E6/MAP/15) |
| 89 | Taking out old damaged decayed leg from its position and S&F new leg in the same position as per existing shape and size made out 18mm square MS pipe 18 gauge painted with powder coated black paint complete all as specified and as shown in drawing. |
| 90 | Taking out old damaged decayed top from its position and S&F new top in the same position as per existing shape and size made out of 18 mm thick prelaminated particle board decorative natural teak finish in both side including teak wood beading all arround and applying one coat french polishcomplete all as specified and directed |
| 91 | All as per items No 12.02 above but Side (left/right) and –ditto-. |
| 92 | All as per items No 12.02 above but bottom base and –ditto-. |
| 93 | Taking out old damaged decayed back Plywood from its position and S&F new 6mm thick plywood BWR grade the same position as per existing shape and size complete all as specified and as shown in drawing. |
| 94 | Taking out old damaged/ decayed pull out tray /drawer from its position and S&F new pull out tray / drawer in the same position as per existing shape and size complete all as specified and as shown in drawing. |
| 95 | All as per items No 12.06 above but bottom drawer and –ditto-. |
| 96 | Taking out old damaged/ decayed stiffners/runners from its position and S&F new stiffners/runners in the same position as per existing shape and size made out of well seasoned teak wood timber complete all as specified and as shown in drawing. |
| 97 | Taking our old damaged/ decayed telescopic channel from its position and S&F New telescopic channel (thickness 1.5mm), as per existing shape and size fixed with screw, as approved complete all as specified and directed and shown on drg. |
| 98 | S&Fin repair, hard rubber shoes in leg of Table bed side complete all as specified and directed. |
| 99 | Taking out old damaged / decayed handle /knob from pull out tray /drawer and S&F new Square 'D' type 100 mm long (4\\"),steel handle as approved by GE the same place, complete all as specified & as directed |
| 100 | M&L for applying synthetic enamel paint to steel surface and applying French Polish one or more coat till glossy finish achieved to match with existing surface and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specified, directed and shown on drawing. |
| 101 | TABLE CENTRE (FD-235, FD/274) |
| 102 | Taking out old damaged / decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18 mm thick plywood BWR grade with 0.9mm thick sunmica decorative natural teak finish on top including wooden beading all round complete all as specified and directed and shown on drawing. |
| 103 | Taking out old damaged / decayed leg from its position and S&F new leg in the same position as per existing shape and size made out of well seasoned hard wood ‘Teak' complete all as specified and shown on drawing. |
| 104 | All as per items No 13.02 above but long rail and –ditto-. |
| 105 | All as per items No 13.02 above but short rail and –ditto-. |
| 106 | All as per items No 13.02 above but stiffener and –ditto-. |
| 107 | Taking out old unserviceable / damaged shoes and S&F new hard PVC shoes with screw in leg complete all as specified and directed. |
| 108 | M&L applying French Polish one or more coat till glossy finish achieved to match with existing surface and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specified, directed and shown on drawing. |
| 109 | TABLE 900X 900X 760mm STEEL (FD-1009) |
| 110 | Taking out old damaged / decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18 mm thick plywood BWR grade with one side 0.9mm thick sunmica decorative natural teak finish on top including wooden beading all aroung complete all as specified and directed and shown on drawing. |
| 111 | Taking out old damaged decayed side rails from its position and S&F new rail as per existing shape and size made out of square tube 25 mm thick 1.6 mm thickness and fixed to frame by run welding complete all as specified and as directed. |
| 112 | All as per items No 14.02 above but legs and ditto-. |
| 113 | M&L spot welding in repairs n.exc 2.50cm in length to broken / damaged steel frame of table complete all as specified and as directed (Note: Thickness of metal to be welded shall not be exc 2mm) |
| 114 | S&F in repair hard rubber shoes at bottom of leg complete all as specified and directed. |
| 115 | Removing dents, bends welding to broken portion rectifying all minor defects and repairs. M&L for painting of Table steel complete surface with synthetic enamel paint OG (1st grade quality) after cleaning rust/dust and preparation of old painted surfaces including applying one coat of red oxide primer wherever required complete all as specified and directed. |
| 116 | TABLE 900X 900X 760mm WOODEN (FD-88(M), FD-291) |
| 117 | Taking out old damaged / decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18 mm thick plywood BWR grade with one side 0.9mm thick sunmica decorative natural teak finish on top including decorative choice Laminated beading all aroung complete all as specified and directed and shown on drawing. |
| 118 | Taking out old damaged/decayed rail (front/back/sides) from its position and S & F new rail in the same position as per existing shape and size made out of well seasoned hard wood ‘Teak' including applying one coat of French polish over wood filler wherever required complete as specified and as directed and as shown on drawing. |
| 119 | All as per items No 15.02 above but legs and ditto-. |
| 120 | S&F wooden corner of size 100x 100 x 35mm thick teak wood bracket corner fixed to place of joining legs with top rails by suitable wood screw complete all as specified and directed |
| 121 | M&L applying French Polish one or more coat till glossy finish achieved to match with existing surface after preparation of surfaces with applying wood filler wherever required complete all as specified & as directed and as shown on drawing. |
| 122 | TABLE DINING FOUR PERSON (FD/MAP II/03) |
| 123 | Taking out old damaged / decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18 mm thick plywood BWR grade with 0.9mm thick sunmica decorative natural teak finish glossy finish on top side and another side balancing white including wooden beading all arround complete all as specified and directed and shown on drawing. |
| 124 | Taking out old damaged / decayed long rail from its position and S&F new long rail in the same position as per existing shape and size made out well seasoned hard wood ‘Teak' including applying one coat of French polish high glossy finish over wood filler whenever required compete all as directed and as shown on drawing. |
| 125 | All as per item No 16.02 here in before but short rail and ditto-. |
| 126 | All as per item No 16.02 here in before but leg and ditto-. |
| 127 | M&L applying French Polish one or more coat till glossy finish achieved to match with existing surface and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specified, directed and shown on drawing. |
| 128 | TABLE 900X 600X 760mm STEEL (FD-1008) |
| 129 | Taking out old damaged / decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18 mm thick plywood BWR grade with one side 0.9mm thick sunmica decorative natural teak finish on top and another side including wooden beading all aroung complete all as specified and directed and shown on drawing. |
| 130 | M&L spot welding in repairs n.exc 2.50cm in length to broken / damaged steel frame of table complete all as specified and as directed (Note: Thickness of metal to be welded shall not be exc 2mm) |
| 131 | Taking out old damaged decayed rails (long/short) from its position and S&F new rail as per existing shape and size made out of square tube 25 mm thick 1.6 mm thickness and fixed to frame by run welding complete all as specified and as directed. |
| 132 | All as per item No 17.03 here in above but legs and ditto-. |
| 133 | Taking out old unserviceable/decayed drawers from its position and S & F new drawer as per existing size and shape made out of 1mm thick plain sheet and applying one coat of OG paint (1st Quality ) over a coat of red oxide primer complete all as specified and as shown on drawing. |
| 134 | Taking out old unserviceable lock from drawer and S & F new brass lock with duplicate keys as per existing size and shape as approved by Engr-in-charge and fixed in same position and make it serviceable condition complete all as specified and as shown on drawing. |
| 135 | S&F in repair of Hard PVC ressed handle to drawer complete all as specified and directed. |
| 136 | S&F in repair new hard rubber shoes at bottom of leg complete all as specified and directed. |
| 137 | Removing dents, bends welding to broken portion rectifying all minor defects and repairs. M&L for painting of Table steel complete surface with synthetic enamel paint OG (1st grade quality) after cleaning rust/dust and preparation of old painted surfaces including applying one coat of red oxide primer wherever required complete all as specified and directed. |
| 138 | TABLE DRESSING LADIES WITH STOOL (FD/MAP-II/07) |
| 139 | Taking out old damaged / decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18mm thick pre-laminated particle board decorative teak glossy finish on one side other side balancing white with wooden beading all around complete all as specified & as directed and as shown on drawing. |
| 140 | All as per item No 18.01 above but sides and –ditto-. |
| 141 | All as per item No 18.01 above but front shutter with long steel piano type hinges and –ditto-. |
| 142 | All as per item No 18.01 above but sides of stool and –ditto-. |
| 143 | Taking out old damaged /decayed bottom from its position and S&F new bottom as per existing shape and size in the same position made out of 12mm thick plywood BWR grade with 0.9mm thick sunmica inner side all as specified & as directed and as shown on drawing. |
| 144 | All as per item No 18.05 above but seat ply of stool with one coat of french polish and –ditto-. |
| 145 | All as per item No 18.05 above but back ply of table with 18mm thick plywood BWR grade with one coat of french polish and –ditto-. |
| 146 | All as per item No 18.05 above but back ply of mirror frame made with 6mm thick plywood BWR grade and –ditto-. |
| 147 | Taking out old damaged / decayed mirror frame form its position and supply and fixing of new frame as per existing shape and size in the same position made out of well seasoned teak wood complete all as specified & as directed and as shown on drawing. |
| 148 | Taking out old damaged / broken mirror from its position and S&F new mirror of size 5mm thick in the same position as approved all as specified and as directed and as shown on drawing. |
| 149 | Taking out old damaged / decayed drawer from its position and S&F new drawer complete all as specified & as directed and as shown on drawing. |
| 150 | Taking out old damaged / decayed handle from drawer/shutter and S&F new Square 'D' type 100 mm long (4\\"), steel handle as approved by GE the same place, complete all as specified & as directed |
| 151 | Taking out unserviceable Magnatic catcher from its position and S&F new Magnatic catcher with stainless of same size and shape complete all as specified & as directed and as shown on drawing. |
| 152 | Remove old damaged / unserviceable foam cushion from its position and S&F new 75mm Thick foam 40 density cushion covered with leatherite as per shape and size complete all as specified & as directed and as shown on drawing. |
| 153 | Taking out old damaged / decayed Revolving Nylon double wheel from its position from stool and S&F new Heavy duty Revolving Nylon double wheel of 50mm dia of same size and shape complete all as specified & as directed and as shown on drawing. |
| 154 | S&F in repair new long/short stiffner at bottom of table dressing ladies made out of 50mm x 30mm section hard wood teak including applying one coat of French polish glossy finish complete all as specified & as directed by engr -in-charge. |
| 155 | M&L applying French Polish one or more coat till glossy finish achieved to match with existing surface and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specified, directed and shown on drawing. |
| 156 | Table Dressing Gents(FD/E6/MAP/16) |
| 157 | Taking out old damaged / decayed legs from table dressing gents and S&F new legs in the same position as per existing shape and size made out of well seasoned hard wood teak complete all as specified and as shown on drawing. |
| 158 | All as per item ser No 19.01 above but mirror frame and -ditto- |
| 159 | Taking out old damaged / decayed back ply wood from its position and S&F new 12mm thick plywood BWR grade as per existing shape and size complete all as specified and as shown on drawing. |
| 160 | All as per ser No 19.03 above but back ply wood of mirror frame and -ditto-. |
| 161 | Taking out old damaged / decayed frame of table dressing gents (Top,bottom and sides of each frame) form its position and S&F new frame (top,bottom and sides) of same as per existing shape and size made with 18mm thick plywood BWR grade with 0.9mm thick sunmica for outer surface including 4mm thick wooden beading on all around complete all as specified and as shown on drawing. |
| 162 | S&F in unserviceable glass shelves to existing position with provide glass holder as per existing shape and size, complete all as specified and as shown on drawing. |
| 163 | Taking out old broken / decayed mirror from its position and S&F new 5.5mm thick looking mirror of the same as per existing shape and size complete all as specified and as shown on drawing. |
| 164 | Taking out old unserviceable hinges from its position and S&F new long piano continous type hinges as per existing shape and size complete all as specified and as directed. |
| 165 | S&F in repair magnatic catcher fixed to inner portion of side frame for holding of door/mirror frame complete all as specified and as directed |
| 166 | M&L applying French Polish to wood/wooden base surface with one or more coat till glossy finish achieved to match with existing surface and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specified, directed and shown on drawing. |
| 167 | TABLE DRESSING LADIES WITH MIRROR (FD/32(M), FD/251) |
| 168 | Taking out old damaged / decayed leg from its position and S&F new leg in the same position as per existing shape and size made out well seasoned hard wood teak complete all as specified & directed and as shown on drawing. |
| 169 | All as per item ser No 20.01 above but bottom rails (long/short) and ditto. |
| 170 | All as per item ser No 20.01 above but mirror frame and ditto. |
| 171 | Taking out old damaged / decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18mm thick plywood BWR grade with 0.9mm thick sunmica decorative natural teak glossy finish for one side including wooden beading all arround complete all as specified and directed. |
| 172 | All as per item No 20.04 here in before but side (left/right) and -detto. |
| 173 | All as per item No 20.04 here in before but bottom and -detto- . |
| 174 | All as per item No 20.04 here in before but inner vertical portion and -detto- . |
| 175 | Taking out old damaged / decayed back ply from its position and S&F new 6mm thick plywood, commercial, grade BWR as per existing shape and size in the same position complete all as specified & as directed and as shown on drawing. |
| 176 | All as per item Ser No 20.08 above but drawer bottom and ditto. |
| 177 | Taking out old unserviceable knob from its position and S&F new knob of 25mm chromium plated knob as approved by GE/Engr-in-charge fixed to same with new brass screws/ nut / bolts and washer complete all as specified & as directed and shown on drawing. |
| 178 | S&F in repair new sliding glass as per existing shape and size in the same position complete all as specified & as directed and as shown on drawing. |
| 179 | Taking out unserviceable alluminum channel from its position and S&F new alluminum channel for sliding glass as per existing shape and size in the same position complete all as specified & directed and as shown on drawing. |
| 180 | Taking out old damaged / broken mirror from its position and S&F new mirror of 5mm thick as per existing shape and size complete all as specified and as directed and shown on drawing. |
| 181 | M&L applying French Polish one or more coat till glossy finish achieved to match with existing surface and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specified, directed and shown on drawing. |
| 182 | PEG TABLE (FD/384) |
| 183 | Taking out old damaged / decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18 mm thick plywood BWR grade with 0.9mm thick sunmica decorative natural teak glossy finish including wooden beading all round complete all as specified and directed and shown on drawing. |
| 184 | Taking out old damaged / decayed long rail (front/rear) from its position and supply of fixing new long rail as per existing shape and size made out of well seasoned hard wood ‘Teak' complete all as directed and shown on drawing. |
| 185 | All as per item No 21.02 here in before but for short rail (right/left) and ditto. |
| 186 | All as per item No 21.02 here in before but for leg and ditto. |
| 187 | All as per item No 21.02 here in before but for stiffener and ditto. |
| 188 | S&F in repair, PVC shoes in repair to bottom of leg as approved quality Complete all as specified and shown on drawing. |
| 189 | M&L for applying French Polish one or more coat till glossy finish achieved to match with existing surface and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specified, directed and shown on drawing. |
| 190 | TEAPOY (FD/382) |
| 191 | Taking out old damaged / decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18 mm thick plywood BWR grade with 0.9mm thick sunmica decorative natural teak glossy finish including wooden beading all round complete all as specified and directed and shown on drawing. |
| 192 | Taking out old damaged / decayed long rail (front/rear) from its position and supply of fixing new long rail as per existing shape and size made out of well seasoned hard wood ‘Teak' complete all as directed and shown on drawing. |
| 193 | All as per item No 22.02 here in before but for short rail (right/left) and ditto. |
| 194 | All as per item No 22.02 here in before but for leg and ditto. |
| 195 | All as per item No 22.02 here in before but for stiffener and ditto. |
| 196 | S&F in repair PVC shoes to bottom of leg as approved quality Complete all as specified and shown on drawing. |
| 197 | M&L applying French Polish one or more coat till glossy finish achieved to match with existing surface and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specified, directed and shown on drawing. |
| 198 | TABLE 900X600X760mm WITH DRAWER WOODEN (FD/41(M), FD/283) |
| 199 | Taking out old damaged / decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18 mm thick plywood BWR grade with one side 0.9mm thick sunmica decorative natural teak finish on top including decorative choice Laminated beading all aroung complete all as specified and directed and shown on drawing. |
| 200 | Taking out old damaged/decayed long rail from its position and S & F new long rail in the same position as per existing shape and size made out of well seasoned ‘hard wood Teak complete as specified and as directed and as shown on drg. |
| 201 | All as per item Serial item No 23.02 above but for short rail and –ditto-. |
| 202 | All as per item Serial item No 23.02 above but for leg and –ditto-. |
| 203 | All as per item Serial item No 23.02 above but for leg stiffener and and –ditto-. |
| 204 | Taking out old damaged/decayed drawer from its position and S & F new drawer as per existing shape and size made out well seasoned ‘hard wood’ timber complete all as specified and directed and as shown on drg. |
| 205 | Taking out old damaged / decayed handle from drawer and S&F new Square 'D' type 100 mm long (4\\"), steel handle as approved the same place, complete all as specified and as directed |
| 206 | M&L applying French Polish one or more coat till glossy finish achieved to match with existing surface after preparation of surfaces with applying wood filler wherever required complete all as specified & as directed and as shown on drawing. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayNov 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender