Tender For Repairing Ofexisting R , Providing Boat Constraction/ Repair Shed And Attending Other Miscellaneous Works At Fish Landing Centre At Yeratta In Middle Adaman.
Tender Value
28.73 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
5 days left
EMD
57464
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
North and Middle Andaman → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing Ofexisting R , Providing Boat Constraction/ Repair Shed And Attending Other Miscellaneous Works At Fish Landing Centre At Yeratta In Middle Adaman.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundation trenches or drain (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottom, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. The rate is inclusive of consumable items and GST. |
| 2 | Dismantling of Cement concrete 1:2:4/1:3:6 or richer mix including disposal of all dismantled materials within in a lead of 500m as directed by EIC all labour charges, minor tools etc complete.The rate is inclusive of all consumable items and GST. |
| 3 | Providing and laying pulverised stone sand filling below the column foundation, plinth beam and floor etc, including cost of pulverised stone sand from the local quarry, watering, ramming, consolidation, including cost of minor tools, transportation charges of the materials to the work site. The rate is inclusive of all consumable items and GST. |
| 4 | Providing and laying in position plain cement concrete PCC of 1:3:6 (1 cement, 3 Pulverised stone sand and 6 stone metal 40mm nominal size) including cost of cement (OPC Gr-43, IS 8112:1989), cost of pulverised stone sand & stone metal from local quarry, screening and washing of both the aggregate mixing of concretye conveying and placing the same consolidation and curing, cost of all other materials, hire charges of mixer machine, vibrator, transportation charges of all materials to work site, all labour charges, cost of minor tools etc., complete. The rate is inclusive of all consumable items and GST. |
| 5 | Providing and laying RCC 1:1.5:3 (1 Cement, 1.5 Mainland river sand and 3 Stone chips 20mm nominal size) works as directed by the EIC, including cost of cement (OPC Gr-43, IS 8112:1989), cost of pulverised stone sand & stone aggregates from local quarry, mixing of concrete, conveying and placing the same, consolidation and curing, cost of all other materials, hire charges of mixer machine, vibrator, transportation charges of all materials to work site, all labour charges, cost of minor tools etc complete. The rate is inclusive of all consumable items and GST. |
| 6 | Providing and fixing Tor steel reinforcement for R.C.C. work including cutting, bending, binding, and placing in position cost of binding wire, minor tools etc. complete. The rate is inclusive of all consumable items and GST. |
| 7 | Providing form work including centering shuttering so as to give rough finish strutting and propping etc. height of propping and centering below supporting floors to ceiling not exceeding 4 m and removal of the same for in situ reinforced concrete and plain concrete work using standard hard wood including cost of timber, all labour charges, transportation charges of material to worksite, nail, cost of minor tools etc complete. The rate is inclusive of consumable items and GST. |
| 8 | Providing 5 cm thick cement concrete flooring in C.C 1:2:4 (1 Cement, 2 pulverised stone sand and 4 stone chips 20 mm nominal size) finished with a floating coat of neat cement @ 20.41 Kg/9.29 sqm as directed by the EIC, including cost of cement, cost of pulverised stone sand & stone aggregates from local quarry, screening and washing of both the aggregates, mixing concrete, conveying and placing consolidation, curing, hire charges of mixer machine and vibrator, transportation charges of all materials to work site, all labour charges, cost of minor tools etc., complete. The rate is inclusive of all consumable items and GST. |
| 9 | Providing and laying 12mm thick cement plaster with 1:4 mix (1 cement, 4 mainland river sand) including cost of cement (OPC Gr-43, IS 8112:1989), mainland river sand, transportation charges of all materials to worksite, all labour charges, minor tools etc., complete. The rate is inclusive of all consumable items and GST. |
| 10 | Painting two coats with plastic emulsion paint of approved brand and manufacture including one coat of cement based primer to give an even shade over the cement surface, including cost of paint, all other materials, labour charges, transportation charges of all materials to work site and cost of minor tools etc., complete. The rate is inclusive of all consumable items and GST. |
| 11 | Distempering with 1st quality acrylic distember (Ready mix) on old work (Two coats) having VOC content less than 50 grams/litre of approved brand and manufacture to give an even shade, including cost of paint, all other materials, labour charges, transportation of all materials to work site and minor tools etc., complete. The rate is inclusive of all comsumable items and GST. |
| 12 | Steel work in built up G.I. tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers, including cost of all materials, all labour charges, transportation charges of all materials to work site, minor tools and plants etc., complete. The rate is inclusive of all consumable items and GST. |
| 13 | Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, using structural steel etc. as required in gratings, frames, guard bar, ladders, railings, brackets, gates & similar works, cost of all other materials, all labour charges and transportation charges of all materials to work site, minor tools etc., complete. The rate is inclusive of all consumable items and GST. |
| 14 | Providing and fixing 15cm wide, 45cm over all semi circular plain GS sheet gutter with iron brackets 40x3mm size bolts, nuts and washers etc. including making necessary connections with rain water pipes etc., complete. 0.80mm thick with zinc coating not less than 275gm/Sqm. The rate is inclusive of all consumable items and GST. |
| 15 | Painting Two coats on old work with Synthetic enamel paint of approved brand and manufacture of required colour to give an even shade over the Steel surface, preparation of surface including cleaning, scrapping of the existing painted surface, including cost of all materials, scaffolding charges, all labour charges, transporation of all materials to work site and minor tools etc., complete.The rate is inclusive of all consumable items and GST. |
| 16 | Providing and fixing of precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by EIC) 0.50mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa stell grade, 5-7 microns epoxy primer on both sides of the sheet and polyster to coat 15-18 microns. Sheet should have protective guard film of 25 meter or as disired by EIC.The sheet shall be fixed using self drilling/self tapping screws of size(5.5 x 55mm)with EPDM seal complete upto any pitch in horizontal/vertical or curved surfaces, including the cost of all materials, cost of hire charges of drilling machine, transportation charges of all materials to worksite, all labour charges, minor tools etc., complete. The rate is inclusive of all consumable items and GST. |
| 17 | Providing and fixing of precoated steel roofing accessories 0.50 mm (+0.05%) total coated thickness, zinc coating 120 grams per sqm as pe IS: 277, in 240 mpa stell grade, 5-7 microns epoxyprimer om both sides of the sheet and polyster to coat 15-18 microns using self drilling/self tapping screws complete. Including cost of all materials, all labour charges and transportation charges of all materials to worksite, minor tools etc., complete. The rate is inclusive of all consumable items and GST. Ridge plain (500 - 600 mm). |
| 18 | Making plinth protection 75 mm thick of cement concrete 1:3:6 (1 cement, 3 Pulverised sand, 6 graded stone aggregate 40 mm nominal size) including finishing the top smooth & finished with neat cement @ 9.76 kgs per 10.00 Sqm, including cost of all materials, scaffolding charges, transportation charges of all materials to worksite, minor tools etc., complete. The rate is inclusive of consumable items and GST. |
| 19 | Providing Cement Concrete surface drain 15 cm x 15 cm width 1:4:8 cement concrete (1 Cement, 4 Pulverised Sand, 8 Stone metal 40mm size) finished with 1:4 cement plaster 12mm thick. (1Cement, 4 Mainland river Sand), including cost of all materials, scaffolding charges, transportation charges of all materials to worksite, minor tools etc., complete. The rate is inclusive of consumable items and GST. |
| 20 | Supplying, fabrication and fixing of M.S. flat for wind ties over roof with G.I. “L” hooks & washers as directed by EIC, including cost of MS flat 40x6mm, cost of all other materials, all labour charges and transportation charges of all materials to worksite, minor tools etc., complete. The rate is inclusive of all consumable items and GST. |
| 21 | Fixing of old truck tyre fenders each set contains 2 nos, old truck tyres including making holes, cuttings, bending and fixing of GI nipple, GI flange, GI Chain, GI D- Shackle/ Wirerope, wire grips etc. But excluding cost of old truck tyres, GI nipple, GI flange, GI chain, GI D- Shackle, wire rope, wire grips etc., which will be supplied by the department on free of cost from ALHW Store at Rangat Bay including cost of hire charges of welding machine, cost of electrodes, packing of gunny bags inside the tyre, scaffolding charges transportation charges of all materials to work site, all labour chages, minor tools and plants, GST, cess etc. complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender