Tender For Modification And Additional Works At Honble Chief Justice Residence, Gupkar Srinagar.
Tender Value
46.16 Lakhs
Estimated cost
Bid Submission
21 Oct 2026
3 days left
EMD
94000
Bank guarantee accepted
Document Fee
1600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Budgam → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Modification And Additional Works At Honble Chief Justice Residence, Gupkar Srinagar.
BOQ
| Sl. No. | Item Description |
| 1 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Electric resistance or induction butt welded tubes |
| 2 | Providing and fixing UV stabilized fiberglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated ‘J’ or ‘L’hooks, bolts and nuts 8mm dia. G.I plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-violet stabilizer in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS: 10192 and IS: 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2mm thick corrugated (2.5\\" or 4.2\\" or 6\\") or step-down (2\\" or 3\\" or 6\\") as specified. |
| 3 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : |
| 4 | Providing and stone soling in foundation, trenches including ramming, consolidation with hand rammer including watering etc all complete |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) incuding carriage |
| 6 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level (M20) including carriage |
| 7 | 15mm Cement plaster on the rough side of single or half brick wall of mix: : 6 ( 1 cement : 6 coarse sand) |
| 8 | Providing and fixing of 1200mm long washroom Vanity cabinets of approved make including cost of all fixtures complete job (Jaquar or equivalent) |
| 9 | Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. |
| 10 | Marble Work |
| 11 | Granite Work |
| 12 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete On steel work |
| 13 | Providing and fixing green artificial grass turf of approved make and quality, UV-resistant polyethylene/PP synthetic grass with minimum 20–25 mm pile height, suitable for outdoor use, including supply, cutting, laying, joining/seaming, adhesive fixing wherever required, trimming, brushing and levelling, complete with all materials, labour, tools and tackles, transportation, wastage and all other incidental works, as per manufacturer's specifications and to the entire satisfaction of the Engineer-in-Charge. |
| 14 | Dismantling and removing existing mica/laminate sheets fixed on wooden/plywood/HDHMR/MDF surfaces, including carefully peeling/removing the laminate, scraping off residual adhesive, cleaning and making the surface free from loose material, including removal of unserviceable materials beyond municipal limits as directed by the Engineer-in-Charge, complete in all respects. |
| 15 | Providing and fixing laminate/Dulmica of approved colour, shade, texture and finish, over existing/new plywood, HDHMR/ MDF or wooden surface, using approved synthetic resin/ contact adhesive, including preparation and cleaning of surface, application of adhesive, cutting, fitting and pressing of laminate, provision of necessary joints, and finishing of all exposed edges with matching laminate/edge tape, including all materials, adhesive, edge tape, labour, tools and tackles, wastage and all incidental works, complete as directed by the Engineer-in-Charge. |
| 16 | Providing and fixing PVC wall panelling of approved colour, shade, texture and design, of minimum 8 mm thickness, on walls, including providing and fixing of GI channel framework of suitable size and thickness @ 600mm c/c and securely anchored to the wall with suitable fasteners, including necessary GI vertical and horizontal channels, brackets, screws, rawl plugs and other fixing accessories; including cutting, fitting, jointing, levelling, plumbing and finishing of panels with matching PVC profiles, corner profiles, edge trims, jointing profiles and mouldings wherever required, including all necessary materials, labour, tools and tackles, scaffolding and incidental works, complete as per manufacturer's specifications and as directed by the Engineer-in-Charge. |
| 17 | Engagement of carpenters and helpers for removing fittings, etc including other carpentry related works and engagement of plumbers for shifting plumbing lines as per the directions of EIC |
| 18 | Carpenters |
| 19 | Helpers |
| 20 | Plumbers |
| 21 | Providing and fixing Hardware fittings of approved including cost of screws etc all complete |
| 22 | Magnetic push latch heavy duty for door |
| 23 | Brass hanging type floor door stopper |
| 24 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. : 150mm |
| 25 | Construction of wardrobes using 18mm thick High-Density High-Moisture Resistance (HDHMR) board conforming to IS 14587, factory-laminated with approved shade/texture high-pressure laminate on one side and dulmica for outer frames, shutters, shelves, partitions, drawers, etc . the cost is inclusive of hanger rods, hydraulic hinges, edge beading) |
| 26 | Providing and fixing pvc french moulding in required size, fixed on walls with nails/adhesive as per the directions of IEC complete job |
| 27 | Providing and fixing of decorative wall paper of approved make, design, colour, texture and pattern, conforming to the approved sample, over properly prepared, smooth, clean and dry wall surface, including cleaning, preparation of surface, application of suitable primer/sealer and approved adhesive, cutting, matching of patterns, jointing, pressing and fixing of wallpaper neatly without wrinkles, bubbles or open joints, including all materials, labour, scaffolding and all incidental works complete as directed by the Engineer-in-Charge. |
| 28 | Providing and fixing aluminium profile glazed shutters, fabricated from extruded aluminium sections of approved make, size, colour and finish, with shutters enclosed in aluminium profile casing/frame, complete with 5/6 mm thick toughened safety glass, accurately cut, edge-finished and securely fixed with suitable glazing gasket/beading. The shutters shall be provided with hydraulic door hinges/patch fittings, as required, including all necessary accessories such as handles, locks, fittings, fasteners, sealants, EPDM/rubber gaskets and other hardware, complete in all respects, including cutting, drilling, fabrication, transportation, installation, alignment and making good, as directed by the Engineer-in-Charge. |
| 29 | Providing and fixing 5mm thick plain glass shelves including bevelling of edges and providing of vaccum pins etc all complete, as directed by the Engineer-in-Charge. |
| 30 | Providing and fixing glass rolling shutter for kitchen openings, fabricated from extruded aluminium sections of approved make, size, colour and finish, with suitable transparent/toughened safety glass panels securely fixed within the shutter sections, complete with top casing/hood, side guides, bottom rail, rolling mechanism, bearings, locking arrangement, handles and all necessary hardware and accessories, including fixing, alignment, adjustment and making good the adjoining surfaces, complete in all respects as directed by the Engineer-in-Charge. |
| 31 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:In cement mortar |
| 32 | 12mm Cement plaster of mix:1 : 6 ( 1 cement : 6 fine sand) |
| 33 | Dismantling wall panelling in linings of walls and wardrobes including dismembering framework etc disposal of surplus material etc all complete |
| 34 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately. Chaar Gul |
| 35 | French spirit polishing, Two or more coats on new works including a coat of wood filler |
| 36 | Providing and fixing wooden cornice 50mm size including cost nails, including of touchwood two or more coats etc all complete |
| 37 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First Class deodar wood |
| 38 | Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).First Class deodar wood |
| 39 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. First Class deodar wood |
| 40 | Providing and fixing hardware fittings of approved make and superior quality |
| 41 | Stainless Steel Butt Hinges 100x58x1.90 mm |
| 42 | Mortise latch locks of Godrej make |
| 43 | Aluminium fancy cabinet handle 8\\" inch long pull handle of approved colour |
| 44 | Aluminium fancy cabinet handle 12\\" inch long pull handle of approved colour |
| 45 | Aluminium fancy cabinet handle 24\\" inch long pull handle of approved colour |
| 46 | Steel brackets up to 300mm long |
| 47 | Steel handles 200mm of superior quality |
| 48 | Providing and fixing Gold metal strip, stainless steel mirror strip PVD coated for decoration fixed as per Architechural drawings and in approved design complete job 20-25mm wide |
| 49 | Providing, fixing and applying Plaster of Paris (POP) false ceiling consisting of frame work made with G.I channels 50mm as main runner at 600 mm c/c both ways, suspended/ supported with G.I channels 50mm wide from existing R.C.C. slab, finished smooth to line and level including necessary supports, scaffolding etc. as required and also including applying a coat of red oxide zinc chromate primer over the M.S. frame work and suspenderscomplete. including providing and fixing expanded metal of size 5.25 mm x 1.25 mm thickness welded to main runners and applying POP (calcium sulphate semi hydrate variety) to the expanded metal of thickness not less than 10 mm |
| 50 | Wooden planking 25mm thick, tongued and grooved in flooring including fixing with iron screws complete:Second class deodar wood |
| 51 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1mm thick |
| 52 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. |
| 53 | Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 54 | Providing wood work in frames of doors, windows, clerestory windows andother frames, wrought framed and fixed in position with hold fast lugs or withdash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Second class deodar wood |
| 55 | Providing and fixing of 12mm thick deodar wood paneling to walls etc over and including cost of G.I frame over and cost of 12mm thick marine ply backing fixed to the G.I frame work including cost of nails, adhesive, necessary stagging & scaffolding etc complete including finishing with PU polishing up to the required finish in all respects as per specifications/ architectural drawings etc as per satisfaction of EIC |
| 56 | Providing and fixing white insulated stainless steel Retractable Shower Seat, of size 298mm x 202mm x 35mm, tested for 150 kg load bearing, steel plate inside ABS (Kohler make or equivalent) |
| 57 | Providing and fixing 5mm thick mirror of superior glass (of approved quality) and of required shape and size with walnut carved frame of approved pattern complete job. |
| 58 | Dismantling tile work in floors and walls laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm |
| 59 | Providing and fixing Ist quality ceramic glazed wall tiles (Size 600x1200mm) conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 60 | Providing and fixing Ist quality ceramic glazed floor tiles (Size 600x1200mm) conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades as approved by Engineer- in-Charge, in floors laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Anti Skid tiles) |
| 61 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender