Tender For Comprehensive Maintenance For Md Accn At Bana Enclave Under Age B/R-Ii Of Ge (S) Mamun
Tender Value
55 Lakhs
Estimated cost
Bid Submission
17 Nov 2026
13 days left
EMD
1.07 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Comprehensive Maintenance For Md Accn At Bana Enclave Under Age B/R-Ii Of Ge (S) Mamun
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 02-Nov-2026 | Corrigendum No 01 | Date | 17-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | M&L for 18 mm thick green marble (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills, cooking platforms & like including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite laid over and including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4, including demolition of existing marble, complete all as specified and directed. |
| 2 | Dismantling floor, hearth or wall tilling and terrazo topping incl cement mortar bedding ( but not backing) removing serviceable tiles to stores and rubish off the premises, complete all as specified and directed. |
| 3 | M&L for non-skid ceramic jointless coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm in floor etc set & jointed in neat cement slurry & pointed in white or coloured cement mixed with pigment to match, laid over and including 15mm thick screed layer in cement mortar 1:6, complete all as specified and directed. |
| 4 | M&L for non-skid ceramic jointless coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but n exc 0.38 sqm in floor etc set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match, laid over and including 15mm thick cement screed in cement mortar 1:6, complete all as specified and directed. |
| 5 | M &L for Non skid ceramic jointless coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but nexc 0.38 sqm in skirting etc set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 10mm thick screed layer in cement mortar 1:4, complete all as specified and directed . |
| 6 | M&L for glazed ceramic coloured tiles of size 450mmx300mm, thickness 7mm as in vertical surfaces such as skirting, dado, etc., set and jointed in neat cement slurry and pointed with coloured cement to match, laid over and including 10mm thick rendering in cement mortar 1:4, complete all as specified & directed. |
| 7 | M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) in sub base of floors surface finished even & rough to receive floor top finish complete all as specified and directed. |
| 8 | S&F Rotational moulded polyethlene water storage tanks three layers of 500 ltrs capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed refixing of inlet, outlet & over flow pipe etc. (Minimum weight of 20mm ball valve - 210 gms including dismantling of old broken water tank complete all as specified and as directed. |
| 9 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) area not exc. 1.5 Sqm each, complete all as specified and directed. |
| 10 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) area exc. 1.5 Sqm but n exc 4.0 sqm each, complete all as specified and directed. |
| 11 | Taking down shutters of any description area exc. 1 sqm and not exc. 2 Sqm each, complete all as specified & directed. |
| 12 | S&F Pressed steel frames made out of MS sheet 1.25mm thick of size 125x60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including back filling of chowkhat with cement concrete Type C-0, 1:3:6 (using 12.5mm graded crushed stone aggregates) complete all as specified and directed. |
| 13 | Preparation of new surface of steel of any description exc 10 cm width or girth and providing two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 14 | Refixing of iron wire mesh door shutters of area exc 1.0 Sqm but n.exc 2.0 Sqm each in chowkhats of same opening including welding butt hinges and easining as per site requirement complete all as specified and directed. |
| 15 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ windows/ Ceosetory windows & other frames / Chowkaht of size 45 x 70 mm comprising of virgin PVC Polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/ cum, screw withdrawal strength of 2200N (Face), 1100 N (Edge), minimum compressive strength 58 N/ Sqmm, Modulus of elasticity 900 N/ Sqmm and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixed in position MS hold fasts/ lugs/ SS dash fasteners of required dia and length complete, as per direction of Engr-in-Charge (Note MS hold fasts/ Lugs or SS Fasteners shall be paid separately)Note : For WPC Solid door/ window frames minus 5mm tolerance in demension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 16 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ windows/ Ceosetory windows & other frames / Chowkaht of size 50 x 125 mm comprising of virgin PVC Polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/ cum, screw withdrawal strength of 2200N (Face), 1100 N (Edge), minimum compressive strength 58 N/ mm Sq, Modulus of elasticity 900 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixed in position MS hold fasts/ lugs/ SS dash fasteners of required dia and length complete, as per direction of Engr-in-Charge (Note MS hold fasts/ Lugs or SS Fasteners shall be paid separately)Note : for WPC Solid door/ window frames minus 5mm tolerance in demension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 17 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative both sides Flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/ cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/ mm Sq, Modulus of elasticity 850 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws, all as per direction of Engr-in-Charge (Note Stainless steel butt hinges and necessary SS screws shall be paid separately) |
| 18 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative decorative both sides Flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/ cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/ mm Sq, Modulus of elasticity 850 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws, all as per direction of Engr-in-Charge (Note Stainless steel butt hinges and necessary SS screws shall be paid separately) |
| 19 | S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 20 | S & F for 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 21 | S&F 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 22 | S&F in repair 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 23 | S&F 250 mm long aluminium alloy , anodised sliding door bolt with hasp, staple bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 24 | S&F in repairs 250 mm long aluminium alloy , anodised sliding door bolt with hasp, staple bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. |
| 25 | S & F 100 mm long Butt hinges type C-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed. |
| 26 | S & F in repair 100 mm long Butt hinges type C-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed. |
| 27 | S&F 150mm long aluminium handle cast type anodised complete all as specified and directed. |
| 28 | S&F in repairs 150mm long aluminium handle cast type anodised complete all as specified and directed. |
| 29 | Hacking out old broken glass ( any thickness , size, quality, or description) from metal frame glazed with putty or fixed with beads/ clips complete all as specified and directed. |
| 30 | S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed. |
| 31 | S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and directed. |
| 32 | S&F 4mm thick Figured glass, pinhead type in squares n.exc 0.5 sq. m each pane fixed with oil putty complete all as specified and directed. |
| 33 | S & F GI wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or rubber/aluminium beads complete all as specified and directed. |
| 34 | S&F in repairs GI wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or rubber/aluminium beads complete all as specified and directed. |
| 35 | S&F 300mm size mild steel, ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed. |
| 36 | S&F in repair 300mm size mild steel, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 37 | M&L for preparation of old painted surface of steel of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint, white or tinted complete all as specified and directed. |
| 38 | M&L for preparation of old painted surface of wood or wood articles of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint, white or tinted complete all as specified and directed. |
| 39 | S&F in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm -210 gms) complete all as specified and directed. |
| 40 | Taking up or down 15mm bore GI/PPR tubing and connections complete all as specified and directed. |
| 41 | Taking up or down 20mm bore GI/PPR tubing and connections complete all as specified and directed. |
| 42 | S&F in repair for 15mm bore water tubes 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed. |
| 43 | S&F in repair for 20mm bore water tubes 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed. |
| 44 | S&F in repair for Shower rose swivel type brass chromium plated any size including fixing to steel pipe or unions complete all as specified and as directed. |
| 45 | S&F in repair Stop valve/Angle valve (ISI Marked), fancy type cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore ccomplete all as specified and as directed. |
| 46 | S&F in repair stop valve (ISI Marked) 15 mm bore fancy type, chromium plated with long shank and cup (concealed type), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore complete all as specified and as directed. |
| 47 | S&F in repairs 15mm bore bib tap, with flange, cast copper alloy fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed. |
| 48 | S&F in repairs 15mm bore PTMT bib tap, any colour, high pressure screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed. |
| 49 | S & F in repair Flush pipe (PVC) squatt pattern closet including all joints and making good to the floor complete all as specified and directed. |
| 50 | S&F in repairs vitreous china wash hand basin flat back or angle back type, white of bowl size 550mm x 400mm including CP brass waste coupling and rubber plug, porcelain stopper, a pair of CI brackets, waste pipe of 32mm dia, complete all as specified and directed. |
| 51 | S & F in repair centre hole basin mixer chromium plated without popup waste system for hot and cold water with 450mm long braided hoses cast copper alloy for iron pipes of size 15mm bore screwed down for iron pipe and fixed complete all as specified and directed. |
| 52 | S & F in repair wall mixer chromium plated without popup waste system for hot and cold water with 450mm long braided hoses cast copper alloy for iron pipes of size 15mm bore screwed down for iron pipe and fixed complete all as specified and directed. |
| 53 | S&F in repairs Brass CP towel rail 20mm dia 'D' type 60 cm long between flanges complete all as specified and directed. |
| 54 | S&F in repairs plastic water closet seat cover, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device for pedestal patter WC, black/white colour complete all as specified and directed. |
| 55 | S&F in repairs Vitreous china wash down water closet pan (pedestal pattern), white complete including fixing to trap including PVC seat and cover with hinging device for pedestal pan and connecting etc, complete all as specified and directed. |
| 56 | S&F in repairs PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet ball valve and handle with and including brackets and PVC bend pipe 60/90cm long etc, complete all as specified and directed. |
| 57 | S&F in repairs 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid or fixed in trenches / floors / walls, complete all as specified and directed. |
| 58 | S&F in repairs 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid or fixed in trenches / floors / walls, complete all as specified and directed. |
| 59 | S&F in repairs 110mm bore PVC (SWR) bend, plain including jointing with solvent cement, complete all as specified and directed. |
| 60 | S&F in repairs 75mm bore PVC (SWR) bend, plain including jointing with solvent cement, complete all as specified and directed. |
| 61 | S&F PVC (SWR) floor trap, plain with grating of 75/100mm dia including jointing with solvent cement all as specified |
| 62 | S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays,including bolts and nuts and securing ends of stays to wall or roof for 100 mm dia CI pipe complete all as specified and directed. |
| 63 | S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays,including bolts and nuts and securing ends of stays to wall or roof for 75 mm dia CI pipe complete all as specified and directed. |
| 64 | S&F GI pipe 25mm dia light grade (in short length) as spout pipe in sunken floor slab laid in slope to brick wall with PCC (1:2:4) type B-1, complete all as specified. |
| 65 | Material and labour for Rendering 15mm thick cement plaster on brick work or concrete surfaces in cement mortar (1:4) including using WPC liquid as per manufacturer instruction @ 200ml /50 kg of cement to sunken portion with proper slope towards outside and finishing cement concerete or brick work surface even and smooth using extra cement including application of APP based polymeric membrane minimum weighing 3Kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid over primed surface by forced application complete all as specified and as directed by Engr-in-ChargeNote : Water proofing compound shall be measured and paid for separately under respctive item. |
| 66 | M&L for preparation of accessible roof surface by scrapping and properly cleaning the existing roof treatment in any number of layers upto original RCC roof top surface. Apply first coat Fiber reinforced Elastomeric liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibres with sun reflective index (SRI) of 100-110, having minimum elongation of 350% tensile strength of 2.9 Mpa and shall have cracks bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic pressure reduce surface temperature upto 10 degree celsius with 33% dilution of priming coat. Laying of fiber mesh of 0.3 mm thickness weave in leno pattern having 45 gsm/Sqm and pasting it properly with overlap of 50mm and allow it too dry. Apply second coat of undiluted layer @4.5 Ltr/Sqm. Apply third and final coat for 10mm thick cement rendering in CM 1:6 at undiluted @0.45 ltr/sqm. Apply third and final coat [email protected]/Sqm as directed by Engr in Charge.(a) M&L for 10mm thick cement rendering in CM 1:3 and finishing the surface even and smooth before application of priming coat complete all as specified and directed.Note: GI pipe of any dia on roof surface to be dismantled before application of WPT and refix in the same position and the rates for dismantling and refixing deemed to be included in above rates. |
| 67 | S&F in repairs sheet glass shelf assembly, consisting of 5.5 mm thick sheet glass 12 cm wide with CP brass bracket, complete all as specified and directed. |
| 68 | S&F in repairs stainless steel bathroom corner shelf assembly with guard railing, fittings and accessories, complete all as specified and directed. |
| 69 | S&F in repairs PVC connection 15 mm bore with PTMT nuts of length 450 mm long complete all as specified and directed. |
| 70 | M&L for 75 mm thick cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate as in plinth protection finished even and smooth using extra cement (incl necessary joint filling with mixture of paving bitumen & sand in 1:3) complete all as specified and directed. |
| 71 | S&F for powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 72 | S&F powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 73 | S&F in repairs 20mm bore stainless steel drapery rod with 1.0mm thick PVC wood grain coating including brackets and knobs, fixed on windows and doors for hanging curtains, complete all as specified and directed. |
| 74 | S&F in repairs Jet Spray (with 1.50 Mtr tube), fixed to EWC and angular stop cock/valve, complete all as specified and directed. |
| 75 | S&F in repairs 32/40mm CP waste coupling for sink complete all as per specified and directed. |
| 76 | S&F and fixng 18 mm thick made N.F.C. (Natural Fiber Composite) Board for backing of Cup Boards and Bathroom/ Kitchen Cabnites etc. of required size having minimum 40% high strength plant derived fibers, consisting of thermoset polymers, non-toxic additives (minimum toxicity index of 12 for 100Gms), having density of 650Kg/cum. Modulus of elasticity (3,4), screw withdrawl strength of 1800N (Face) and 900N (Edge), having interlaminar shear strength and thermal stability, all as per specification of the manufacturer and direction of Engineer-in-Charge including dismantling existing boarding complete all as specified and directed. |
| 77 | S&F 30 mm flap Continuous (piano) hinges, mild steel, bright finish or lectrogalvanised complete all as specified and directed. |
| 78 | M&L 100 mm Hasp and staple, aluminium anodised, including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 79 | S&F in repairs high grade stainless steel kitchen plate rack of size 700 x 900 mm of approved make fixed with mild steel screw complete all as specified and directed. |
| 80 | S&F in repairs 32/40 mm dia, corrugated waste pipe suitable for WHBs/sinks including threaded PVC socket suitable for shank of waste coupling complete all as specified and directed. |
| 81 | S&F in repairs 32/40mm PTMT waste coupling for basin/sink (half or full threaded) complete all as per specified and directed. |
| 82 | S&F ball catcher with proper magnetic effect fixed with shutter, complete all as specified and directed. |
| 83 | Supply and fixing as in repair fancy type looking mirror of overall size 600mm x 450mm of bevelled edges, made out of selected quality glass of 6mm thick mounted on 6mm thick building board or commercial plywood & fixed to wooden plugs with Stainless Steel brackets & Stainless Steel fancy type screws & locking washers at 04 corners complete all as specified and directed. |
| 84 | M&L for complete removal of existing treatment, preparation of surfaces, applying 2mm thick wall care putty making the surface even & smooth and applying two coats of oil emulsion distemper over complete all as specified and directed. |
| 85 | M&L for preparation of old decorated surfaces of walls of any description by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of white wash complete all as specified and directed. |
| 86 | M&L for preparation of old decorated surfaces of ceiling of any description by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of white wash complete all as specified and directed. |
| 87 | Taking down cement plaster / wall tiles including backing etc from brick/stone walls / concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 88 | M&L for 15mm thick rendering in CM 1:6 over on brick work and concrete surfaces of wall, finished the surface even and smooth without using extra cement, including necessary scaffolding complete all as specified and directed. |
| 89 | M&L for rendering 10 mm thick plaster on fair face of brick work or concrete surface as in ceiling in cement mortar 1:3, finished even and smooth without using extra cement, including necessary scaffolding complete all as specified and directed. |
| 90 | M&L for preparation of newly plastered surfaces of walls by applying 1mm thick wall care putty making the surface even & smooth and applying two coats of oil bound distemper, complete all as specified and directed. |
| 91 | M&L for preparation of newly plastered surfaces of walls, roof projection, ceiling, chajjas and applying three coats of white wash, complete all as specified and directed. |
| 92 | Repair to iron wire mesh/Garage shutters exc 1.0 Sqm but n.exc 2.00 Sqm including replacement of unserviceable/damaged hinges, handle and necessary welding to shutter and chowkhat for making good and refixing in same opening new/old chowkhat in serviceable condition complete all as specified and directed. |
| 93 | M&L for brickwork with Fly Ash Bricks (old size), straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6,including dismantling of existing brick work, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 94 | M&L for brickwork with Fly Ash Bricks (old size), straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6,including dismantling of existing brick work, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 02, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 17, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 13 daysNov 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender