Tender For Special Repair To Bldg No T-214 And T-78 At 25 Inf Div C At Rajouri Under Age B/R Dett-B Of Ge 862 Ews
Tender Value
28.86 Lakhs
Estimated cost
Bid Submission
06 Nov 2026
4 days left
EMD
58000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rajouri → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No T-214 And T-78 At 25 Inf Div C At Rajouri Under Age B/R Dett-B Of Ge 862 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Schedule 'A' Part-I (B/R Works)Dismantling of corrugated steel sheeting of any gauge thickness incl Nainital or similar pattern roof coverings, complete all as specified and directed. |
| 2 | S&F of pre painted coloured galvalume aluminium zink coating GI based corrugated steel sheet 0.50 mm thick of aproved colour (multi colour pattern as approved by GE) having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 3 | S&F of thickness 0.50mm Plain, coloured galvalume aluminium zinc coated sheeting, alloy of approved colour (multi colour pattern as approved by GE) as in ridges, hips, valley gutter, drip and straight flashing of approved colour (length and girth as fixed), complete all as specified and directed. |
| 4 | Dismantling timber scantaling frame of work 40 sq cm and over in section in any position, complete all as specified and directed. |
| 5 | M&L for Mild steel structural steel work conforming to Fe-410-S including tubular members as in main and cross beams, hip and jack rafter; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates and painted with a shop coat of zinc chromate primer before hoisting and fixing in position, complete all as specified and directed. |
| 6 | Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 7 | M&L for 75mm thick cement concrete type D-2 1:4:8 (using 40 mm graded stone aggregate) as in sub base for tiling, complete all as specified and directed. |
| 8 | M&L for light shade Vitrified coloured tile of size 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, laid over and including 15mm thick screed bed in CM(1:6) in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match, complete all as specified and directed. |
| 9 | M&L for light shade Vitrified tile of size 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, laid over and including 10mm thick screed bed in CM(1:4) in dados /skirting jointed in neat cement slurry & pointed in white or coloured cement to match, complete all as specified and directed. |
| 10 | M&L for non skid ceramic coloured tile of size 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick screed in Cement morter1:4 as in floor, complete all as specified and directed. |
| 11 | M&L for glazed ceramic coloured tile in vertical surface of size 350 x 250 x 7 mm or 450 x 350 x 7 mm thick over & including 10 mm thick rendering 1:4 CM without using extra cement and set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tile, complete all as specified and directed. |
| 12 | M&L for granite work 16-18mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed. |
| 13 | Demolition of stone/Brick masonry built in cement mortar including all quoins, pillars, arches etc, complete all as specified and directed. |
| 14 | M&L for stone walling of random rubble, uncoursed, well bonded, bedded and solidly hearted in walls, abutments and similar work buillt in CM 1:6, complete all as specified and directed. |
| 15 | All as per Item No 14.00 here-in-before but except stone.Note: Stone retrieved from item No 13 will be re-used. |
| 16 | M&L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6, complete all as specified and directed. |
| 17 | M&L for brick work with sub class ‘B’ old size bricks, straight or curved on plan and any radius in half brick thick wall built in cement mortar 1:4, complete all as specified and directed. |
| 18 | Taking down cement plaster on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc, complete all as specified and directed. |
| 19 | M&L for rendering 15 mm thick on fair faces of brick/stone work or concrete surface in CM (1:6), finished even and smooth without using extra cement, complete all as specified and directed. |
| 20 | M&L for rendering 15 mm thick on fair faces of brick/stone work or concrete surface in CM (1:4), finished even and smooth without using extra cement, complete all as specified and directed. |
| 21 | M&L for raised pointing to random or polygonal rubble stone masonry, uncoursed or brought upto courses in cement mortar 1:4, complete all as specified and as directed. |
| 22 | M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in coping including necessary form work, complete all as specified and directed. |
| 23 | M&L for complete removal of existing treatment on wall/roof surface including cornices and chajjas etc and applying two coats of exterior emulsion all weather proof paint of Apex Ultima of ASIAN or equivalent make of approved colour (multi colour pattern as approved by GE) over and including a coat of primer, complete all as specified and directed. |
| 24 | M&L for preparation of new plastered surface and applying two coats of exterior emulsion all weather proof paint of Apex Ultima of ASIAN or equivalent make of any approved colour (multi colour pattern as approved by GE) over and including a coat of primer, complete all as specified and directed. |
| 25 | M&L complete removal of existing treatment from wall surfaces and applying two coats of distemper oil emulsion, white or tinted including clearcolle on surfaces for preparatory to distempering, complete all as specified and directed. |
| 26 | M&L for preparation of new plastered surfaces and clearcolle for priming to distempering and applying two coats of distemper oil emulsion, white or tinted, complete all as specified and directed. |
| 27 | Taking down chowkhats or frames with shutters exc. 1.5 sqm but n. exc. 4 sqm each (without taking off shutters from the frame), complete all as specified and directed. |
| 28 | All as per item No 27.00 here-in-before but n. exc. 1.5 Sqm each. |
| 29 | Taking down shutter of any description of area not exceeding 1 sqm each, complete all as specified and directed. |
| 30 | M&L for cutting holes into block wall built in cement mortar for inserting hold fast exc half brick and n.exc one brick and making good to dismantled portion with PCC 1:2:4 type B-1 or cement mortar 1:3, complete all as specified and directed. |
| 31 | M&L for hold fast made out of flat iron conforming to Fe-410-1 or 310-0, complete all as specified and directed |
| 32 | S&F for powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 33 | S&F for powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender