Tender For Addition Alteration Of Building No P-6 At Guest Room Of Af Stn Mohanbari
Tender Value
43.50 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
14 days left
EMD
87000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dibrugarh → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition Alteration Of Building No P-6 At Guest Room Of Af Stn Mohanbari
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Brickwork or stone/ boulder masonary, built in cement mortar or cement lime mortar for making opening in wall complete all as specified and directed. |
| 2 | Dismantling wall and ceiling board (fibre, pulp, insulation) any thickness incl. cover fillet complete all as specified and directed. |
| 3 | Surface dressing n.exc 15 cm deep in soft/loose soil complete all as specified and directed. |
| 4 | Excavating in trenches, n.exc 1.50 m wide and n.exc 1.50 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft and loose soil complete all as specified and directed. |
| 5 | Same as item No. 04 here-in-before but depth exc 1.50 m but n.exc 3.00 m complete all as specified and directed. |
| 6 | M&L for plain cement concrete 1:4:8 type D2 using 40 mm graded aggregate crushed stone aggregate as in foundations/mass concrete complete all as specified and directed. |
| 7 | M&L for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed. |
| 8 | M&L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed. |
| 9 | M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed. |
| 10 | M&L for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed. |
| 11 | Use and waste for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter for rough finished surfaces complete all as specified and directed. |
| 12 | Use and waste for formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces complete all as specified and directed. |
| 13 | Use and waste for formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams etc for rough finished surfaces complete all as specified and directed. |
| 14 | Use and waste for formwork to slab, chullah hoods, chajjas, troughs and similar items for rough finished surfaces including edges complete all as specified and directed. |
| 15 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed. |
| 16 | Same as item No 15 here in before but 6mm to 10mm dia bars as in stirrups, spacers and binders complete all as specified and directed. |
| 17 | M&L for RCC M-25 design mix as in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns etc basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 18 | M&L for RCC M-25 design mix as in columns, pillars, piers, posts and struts complete all as specified and directed. |
| 19 | M&L for RCC M-25 design mix as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 20 | M&L for RCC M-25 design mix as in slab, chajjas and the like complete all as specified and directed. |
| 21 | Moorum/red bajri filling in floors or pavings, laid in layers n.exc 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed. |
| 22 | Hardcore of gauge n.exc 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface for plinth protection/ under floor complete all as specified and directed. |
| 23 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 24 | M&L for brick work with sub class 'B' bricks(old size), straight or curved on plan exceeds 6m mean radius,built in cement mortar 1:4 complete all as specified and directed. |
| 25 | M&L for half brick thick brick work with sub class 'B' bricks(old size) straigth or curved on plan exc 6m mean radius built in cement mortar (1:4) complete all as specified and directed. |
| 26 | M&L for rendering (10+5)mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished the surfaces even and fair without using extra cement and using water proofing compound as per manufacturer instruction complete all as specified and directed. |
| 27 | M&L for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete sur faces even and smooth without using extra cement complete all as specified and directed. |
| 28 | Supply only liquid water proffing compound as required complete all as specified and directed. |
| 29 | Providing and fixing factory made uPVC white colour Sliding window Three track made of area n.exc 2.00 Sqm of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed.Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose. |
| 30 | S&F for tinted glass with sheet glass 4.80mm thick , pin head type and glazing in squares exc 0.5 Sqm in each pane complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 31 | S&F for tinted glass with sheet glass 4.80mm thick , pin head type and glazing in squares exc 0.5 Sqm in each pane complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender