Tender For Repair/ Maintenance Of Steel And Wooden Furniture For Otm Accn Of All Coys, Mh, Mes, Aec Record, Central Institute, Stn Hq And Other Depts At Aec Trg College And Centre Pachmarhi.
Tender Value
11.85 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
3 days left
EMD
23700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hoshangabad → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Of Steel And Wooden Furniture For Otm Accn Of All Coys, Mh, Mes, Aec Record, Central Institute, Stn Hq And Other Depts At Aec Trg College And Centre Pachmarhi.
BOQ
| Sl. No. | Item Description |
| 1 | DRG NO-FD- 55, 231, 284: TABLE 3'x2' WITHOUT DRAWER: Supply and fixing in replacement of top 18mm thick pre-laminated particle board of size as shown on drawing, one side with shade as approved and balancing white with 4 mm teak wood edging all round including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge. |
| 2 | DRG NO-FD- 55, 231, 284: TABLE 3'x2' WITHOUT DRAWER: Supply and fixing in replacement of leg made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge. |
| 3 | DRG NO-FD- 55, 231, 284: TABLE 3'x2' WITHOUT DRAWER: Supply & fixing in replacement of top side rail of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in Charge. |
| 4 | DRG NO-FD- 55, 231, 284: TABLE 3'x2' WITHOUT DRAWER: M&L French Polishing to Table of any description width of girth including cleaning and preparation of the surface complete all as specified, shown on drawing and as directed by Engineer-In-Charge |
| 5 | DRG NO-FD - 33, 249, 275: TABLE WRITING: Supply and fixing in replacement top of 18mm thick pre-laminated particle board of size as shown on drawing, one side with shade as approved and balancing white with 4 mm teak wood edging all around including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge. |
| 6 | DRG NO-FD - 33, 249, 275: TABLE WRITING: Supply and fixing in replacement of leg made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge. |
| 7 | DRG NO-FD - 33, 249, 275: TABLE WRITING: Supply and fixing in replacement of side stiffener made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge. |
| 8 | DRG NO-FD - 33, 249, 275: TABLE WRITING: Supply and fixing in replacement of centre stiffener made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in Charge. |
| 9 | DRG NO-FD - 33, 249, 275: TABLE WRITING: Supply and fixing in replacement drawer made out of 12 mm thick teak wood plank and 6 mm thick ply at bottom and back as per existing size and pattern complete all as specified, shown on drawing and as directed by Engineer-in- Charge. |
| 10 | DRG NO-FD - 33, 249, 275: TABLE WRITING: Supply and fixing in replacement shutter made out of 18 mm thick prelaminated particle board as per existing size and pattern complete all as specified, shown on drawing and as directed by Engineer-in- charge. |
| 11 | DRG NO-FD - 33, 249, 275: TABLE WRITING: Supply and fixing in replacement side and back ply made out of 6 mm thick ply as per existing size and pattern complete all as specified, shown on drawing and as directed by Engineer-in- Charge. |
| 12 | DRG NO-FD - 33, 249, 275: TABLE WRITING: M&L French Polishing to Table writing of any description width of girth including cleaning and preparing the surface for the articles of table writing complete all as specified, shown on drawing and as directed by Engineer-In-Charge. |
| 13 | DRG NO-FD- 201 & 229: CHAIR EASY: Supply & fixing in replacement of rear and front legs of Ist class hard wood MP teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engineer-in- Charge. |
| 14 | DRG NO-FD- 201 & 229: CHAIR EASY: Supply & fixing in replacement of front rail of Ist class hard wood MP teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engineer-in- Charge. |
| 15 | DRG NO-FD- 201 & 229: CHAIR EASY: Supply & fixing in replacement of rear rail of Ist class hard wood MP teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engineer-in- Charge |
| 16 | DRG NO-FD- 201 & 229: CHAIR EASY: Supply & fixing in replacement of top rail of Ist class hard wood MP teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engineer-in- Charge. |
| 17 | DRG NO-FD- 201 & 229: CHAIR EASY: Supply & fixing in replacement of arm rest of Ist class hard wood MP teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engineer-in- Charge. |
| 18 | DRG NO-FD- 201 & 229: CHAIR EASY: M&L French Polishing of any description width of girth including cleaning and preparation of the surface complete all as specified, as shown on drawing and as directed by Engineer-In-Charge. |
| 19 | DRG NO- FD-259 REPAIR TO CHAIR VERANDAH STEEL Removing/ Taking down unservicveable cane from chair verandah and weaving with plastic cane 4 to 5mm wide half round superior quality of approved make complete in matt pattern including painting to frame of chair with one coat of white synthetic enamel paint including preparation of old painted steel surfaces complete all as specified and directed by Engineer-in- Charge. |
| 20 | DRG No-FD-259 REPAIR TO CHAIR VARANDAH STEEL Removing broken legs and S&F new legs made to shape as front eg arm and rear leg complete one piece of 18/19 mm dia MS conduit pipe of 1.6mm thickness including all necessary welding and painting with two coats synthetic enamel white paint over a coat of red oxide primer on new steel surface and one coat of white enamael paint over old steel painted surface including preparation of surfaces complete all as specifiec and directed by Engineer-in- Charge. |
| 21 | DRG NO- FD-259 REPAIR TO CHAIR VERANDAH STEEL Removing old U/S PVC shoes and supply and fixing new PVC shoes of suitable size complete all as specified and directed. |
| 22 | DRG NO-FD-34, 232, 278, 382 & DB-3974: TEAPOY: Supply and fixing in replacement top of 18mm thick pre-laminated particle board of size as shown on drawing, one side with shade as approved and balancing white with 4 mm teak wood edging all around including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in charge. |
| 23 | DRG NO-FD-34, 232, 278, 382 & DB-3974: TEAPOY: Supply and fixing in replacement of leg made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge. |
| 24 | DRG NO-FD-34, 232, 278, 382 & DB-3974: TEAPOY: Supply and fixing in replacement of front/ side rail made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in-Charge. |
| 25 | DRG NO-FD-34, 232, 278, 382 & DB-3974: TEAPOY: M&L French Polishing to teapoy of any description width of girth including cleaning and preparing the surface for the articles of teapoy complete all as specified, and shown on drawing and as directed by Engineer-In-Charge. |
| 26 | DRG NO-FD/E6/MAP/10: CHAIR DINING: Supply & fixing in replacement of front legs of existing size and shape / pattern as shown on drawing of Ist class hard wood MP teak including polishing to match with the existing complete all as specified and as directed by Engineer-in- Charge. |
| 27 | DRG NO-FD/E6/MAP/10: CHAIR DINING: Supply & fixing in replacement of rear legs of existing size and shape/ pattern as shown on drawing of Ist class hard wood MP teak including polishing to match with the existing complete all as specified and as directed by Engineer-in- Charge. |
| 28 | DRG NO-FD/E6/MAP/10: CHAIR DINING: Supply & fixing in replacement of side/front/rear rail of existing size and shape Ist class hard wood MP teak including polishing to match with the existing complete all as specified, shown on drawing and as and as directed by Engineer-in- Charge. |
| 29 | DRG NO-FD/E6/MAP/10: CHAIR DINING: Supply & fixing in replacement of back vertical strips as per existing size & shape of Ist class teak wood MP teak including polishing to match with the existing complete all as specified, as shown on drawing and as directed by Engineer-in- Charge. |
| 30 | DRG NO-FD/E6/MAP/10: CHAIR DINING: Supply & fixing in replacement of stiffener of existing size and shape of Ist class hard wood MP teak including polishing to match with the existing complete all as specified, as shown in drawing and as directed by Engineer-in- Charge. |
| 31 | DRG NO-FD/E6/MAP/10: CHAIR DINING: Supply & fixing in replacement of back rest of of existing size and shape of Ist class hard wood MP teak including polishing to match with the existing complete all as specified, as shown in drawing and as directed by Engineer-in- Charge. |
| 32 | DRG NO-FD/E6/MAP/10: CHAIR DINING: Supply & fixing in replacement of Seat made of 75 mm thick, 32 density foam with fabricated leathorised rexine on 12 mm thick commercial ply as shown on drawing complete all as specified and as directed by Engineer-in- Charge. |
| 33 | DRG NO-FD/E6/MAP/10: CHAIR DINING: Supply & fixing in replacement of fabricated leathorised rexine on seat of chair dinning as shown on drawing complete all as specified and as directed by Engineer-in- Charge. |
| 34 | DRG NO-FD/E6/MAP/10: CHAIR DINING: M & L Wooden portion shall be smoothened to apply best quality water base French polish glossy finish including cleaning and preparation of the surface complete all as specified, as shown on drawing and as directed by Engineer-In-Charge |
| 35 | DRG NO-CEJZ/SKD/343: TABLE DINING (930 x 930 x 790 MM): Supply and fixing in replacement top of 18mm thick pre-laminated particle board of size as shown on drawing, one side with shade as approved and balancing white with 4 mm teak wood edging all around including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge. |
| 36 | DRG NO-CEJZ/SKD/343: TABLE DINING (930 x 930 x 790 MM): Supply and fixing in replacement of drawer size 720mm x 380mm the bottom of drawer shall be 6mm BWR commercial ply and sides and back of drawer 18 mm particle board of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by engineer-in- Charge. |
| 37 | DRG NO-CEJZ/SKD/343: TABLE DINING (930 x 930 x 790 MM): Supply and fixing in replacement of drawer size 350mm x 380mm the bottom of drawer shall be 6mm BWR commercial ply and sides and back of drawer 18 mm particle board of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by engineer-in- Charge. |
| 38 | DRG NO-FD- 29, 274, 235, 375: TABLE CENTRE: Supply and fixing in replacement of top 18mm thick pre-laminated particle board of size as shown on drawing, one side with shade as approved and balancing white with 4 mm teak wood edging all sround including polishing to match the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge. |
| 39 | DRG NO-FD- 29, 274, 235, 375: TABLE CENTRE: Supply and fixing in replacement of leg made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in-Charge. |
| 40 | DRG NO-FD- 29, 274, 235, 375: TABLE CENTRE: Supply and fixing in replacement of side rail made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer- in- Charge. |
| 41 | DRG NO-FD- 29, 274, 235, 375: TABLE CENTRE: Supply and fixing in replacement of front/rear rail made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge. |
| 42 | DRG NO-FD- 29, 274, 235, 375: TABLE CENTRE: Supply and fixing in replacement of stiffener made out of Ist class hard wood MP teak of existing size and shape including polishing of surface to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge. |
| 43 | DRG NO-FD- 29, 274, 235, 375: TABLE CENTRE: M&L French Polishing to Table Centre of any description width of girth including cleaning and preparation of the surface complete all as specified, as shown on drawing and as directed by Engineer-In-Charge. |
| 44 | DRG NO-FD & DB: RECLEANING OF CHAIRS: Taking down old cane from the all type of chairs and re-canning with 2 to 2.5 mm wide half round new plastic cane in Godrej pattern with 3 strands in two in central holes both way (in place of two in other holes using minimum weight of cane mentioned below and complete all as per drawing and as directed :- (a) Chairs dining/Chair Writing /Chair CBB/ Chair CBA 75 to 100 Gram. (b) All type of Chair Easy (c) Stool Dressing |
| 45 | DRG NO-FD/E6/ MAP/16: TABLE DRESSING GENTS WITH MIRROR: S & F in replacement of 5 mm thick looking mirror Size 1200 x 600mm as per existing size and shape including fitting with the teak wood frame & polish to frame with High glossy French polish and complete all as specified, as shown in drawing and as directed by Engineer-in- Charge. |
| 46 | DRG NO-FD/E6/ MAP/16: TABLE DRESSING GENTS WITH MIRROR: S & F in replacement of back made of 6 mm thick commercial ply Size 1200 x 600mm as per existing size and shape complete as specified, all as shown in drawing and as directed by Engineer-in- Charge. |
| 47 | DRG NO-FD/E6/ MAP/16: TABLE DRESSING GENTS WITH MIRROR: S & F in replacement of plain glass shelf of size: 565 x100 x 5mm thick duly grinded smoothly to edges as per existing size and shape as shown on drawing complete all as specified, as shown in drawing and as directed by Engineer -in- Charge. |
| 48 | DRG NO-FD/E6/ MAP/16: TABLE DRESSING GENTS WITH MIRROR: M & L French Polishing Table Dressing gents with mirror of any description width of girth including cleaning and preparation of the surface complete all as specified, as shown on drawing and as directed by Engineer-In-Charge. |
| 49 | DRG NO-FD -30, 239 & 273: TABLE DINING 6 PERSONS: Supply and fixing in replacement top of 18mm thick pre-laminated particle board of size as shown on drawing, one side with shade as approved and balancing white with 4 mm teak wood edging all round including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge. |
| 50 | DRG NO-FD -30, 239 & 273: TABLE DINING 6 PERSONS: Supply and fixing in replacement of leg made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge. |
| 51 | DRG NO-FD -30, 239 & 273: TABLE DINING 6 PERSONS: Supply and fixing in replacement of side rail made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge. |
| 52 | DRG NO-FD -30, 239 & 273: TABLE DINING 6 PERSONS: Supply and fixing in replacement of front / rear rail made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge. |
| 53 | DRG NO-FD -30, 239 & 273: TABLE DINING 6 PERSONS: M&L Polishing with Hi-gloss French polish of any description width of girth including preparation of surface complete all as specified, as shown on drawing and directed by Engineer-In-Charge. |
| 54 | DRG NO-FD – 246, 247: BED HARD PLY WOOD TOP: Supply and fixing in replacement of 12 mm thick commercial plywood type AA (ISI -303 Marked) of existing size and shape complete all as specified, shown on drawing and as directed by Engineer-in- Charge. |
| 55 | DRG NO-FD – 246, 247: BED HARD PLY WOOD TOP: Supply and fixing in replacement of long rail made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge. |
| 56 | DRG NO-FD – 246, 247: BED HARD PLY WOOD TOP: Supply and fixing in replacement of head rest ply of 4mm thick plywood of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge. |
| 57 | DRG NO-FD – 246, 247: BED HARD PLY WOOD TOP: Supply and fixing in replacement of foot rest ply of 4 mm thick plywood of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge. |
| 58 | DRG NO-FD – 246, 247: BED HARD PLY WOOD TOP: Supply and fixing in replacement of stiffener made out of Ist class hard wood MP teak including polishing to match with existing size and shape complete all as specified, shown on drawing and as directed. |
| 59 | DRG NO-FD – 246, 247: BED HARD PLY WOOD TOP: Supply and fixing in replacement of head rest made out of Ist class hard wood MP teak frame with 4 mm thick plywood of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge. |
| 60 | DRG NO-FD – 246, 247: BED HARD PLY WOOD TOP: Supply and fixing in replacement of foot rest made out of Ist class hard wood MP teak frame with 4 mm thick plywood of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge. |
| 61 | DRG NO-FD – 246, 247: BED HARD PLY WOOD TOP: M&L French Polishing with Hi-gloss French polish of any description width of girth including preparing of the surface for polish complete all as specified, as shown on drawing and as directed by Engineer-In-Charge. |
| 62 | DRG NO. FD-220 REPAIR/REWEAVING OF CHARPOY GI PIPE Dismantling/taking out carefully of old existing unserviceable ply from GI Charpoy and replaced with S&F new ply of 12mm thick ply wood commercial grade BWR with and including two numbers middle support of flat iron 35x6mm thick of equal size to be welded on long rail of charpoy with and including 8 Nos L type 75mm long bracket made of flat iron 35x6mm, welded to each short and long rail 150 mm fromcorner made to same shape and size as shown on drawing including two coat of synthetic eanmel paint over a coat of pink primer to flat iron and bracket complete all as specified and directed by Engr-in-Charge. |
| 63 | DRG NO. FD-220 REPAIR/REWEAVING OF CHARPOY GI PIPE Removing of unserviceable long rail of charpoy GI pipe and supplying and fixing new long rail made out from 32 mm dia GI tubing medium grade ISI marked threading at both ends of shape and size as per existing long rail of charpoy GI Pipe complete all as specified and shown on drawing and as directed by Engineer-in-charge |
| 64 | DRG NO. FD-220 REPAIR/REWEAVING OF CHARPOY GI PIPE as per item No 63 but short rail as per drg |
| 65 | DRG NO. FD-220 REPAIR/REWEAVING OF CHARPOY GI PIPE Cutting & threading 32mm GI Pipe both side end of unserviceable long rail and converted into Short rail as existing size and fixed to GI Charpoy complete all as specified and directed by Engr-in- Charge . |
| 66 | DRG NO. FD-220 REPAIR/REWEAVING OF CHARPOY GI PIPE Cutting & threading 32mm GI Pipe both side end of unserviceable short rail obtained from items No 86 here in before and converted into leg as existing size and fixed to GI Charpoy complete all as specified and directed by Engr-in- Charge . |
| 67 | DRG NO. FD-220 REPAIR/REWEAVING OF CHARPOY GI PIPE Removing of unserviceable legs of charpoy GI Pipe supplying and fixing of new leg out of 32mm dia GI Tubing medium grade of shape and size as per existing legs of charpoy GI pipe complete all as specified and shown on drawing by Engineer-in-charge. |
| 68 | DRG NO. FD-220 REPAIR/REWEAVING OF CHARPOY GI PIPE Removing of unserviceable check nut of G.I. charpoy and replacement with new GI Check nut, 9mm thick suitable for charpoy GI Pipe 32 mm bore pipe complete all as specified & directed by Engineer-in-charge. |
| 69 | DRG NO. FD-220 REPAIR/REWEAVING OF CHARPOY GI PIPE Removing of unserviceable elbow of charpoy GI pipe and S&F three way GI elbow 32mm bore medium grade, ISI marked complete all as Specified & directed by Engineer-in-charge. |
| 70 | DRG NO. FD-220 REPAIR/REWEAVING OF CHARPOY GI PIPE Replacing of new hard wooden block of size 35 x 35 x 40 mm shall be supply and fixed with one side of the leg all as directed by eingineer-in-charge by Engineer-in-charge. |
| 71 | DRG No. FD-84 (M), FD-1004, FD-1003REPAIR TO STEEL TABLE CLERK Removing of old existing unserviceable drawer and M&L for new drawer made of 20 gauge PBI sheet for table officer/ clerk all as specified and shown on drawing and as directed by Engineer-in-charge. |
| 72 | DRG No. FD-84 (M), FD-1004, FD-1003REPAIR TO STEEL TABLE CLERK Removing of existing unserviceable lock and S&F new lock with two keys suitable for above table, Godrej pattern all as shown on drawing and as directed by Engineer-in-charge. |
| 73 | DRG No. FD-84 (M), FD-1004, FD-1003REPAIR TO STEEL TABLE CLERK Removing of old wornout shoe and S&F new hard rubber shoe of best quality complete all as shown on drawing and as directed by Engineer-in-charge. |
| 74 | DRG No. FD-84 (M), FD-1004, FD-1003REPAIR TO STEEL TABLE CLERK Removing of old existing unserviceable decayed leg of table office officer/clerk and S&F new 25 Sqmm MS 16 gauge conduit pipe including welding and one coat of synthetic enamel paint over a coat of red oxide primer all as shown on drawing and as directed by Engineer-in-charge. |
| 75 | DRG No. FD-84 (M), FD-1004, FD-1003REPAIR TO STEEL TABLE CLERK M&L for painting with one coat of synthetic enamel paint (olive green ) including removing all dents filling with putty and preparation of surfaces for table officer/ clerk all as directed by Engineer-in-charge. |
| 76 | DRG No. FD-1027 REPAIR TO FORM WITH OUT BACK/WITH BACK Removing old U/S planks of any description and in any position and S&F new 1st class hard wood shisham seat plank of size 1525 mm x 300 mm x 25 mm thick for form without back fixed with 6 Nos bolt 08 mm dia, 65 mm long nuts with washers including two coats of french polishing to new wooden surface including preparation of new surfaces complete all as specified and directed by Engineer-in-charge. |
| 77 | DRG No. FD-1027 REPAIR TO FORM WITH OUT BACK/WITH BACK Description all as per item No. 76.00 above but seat plank of size 1800 mm x 300 mm x 25 mm thick for form with back. |
| 78 | DRG No. FD-1027 REPAIR TO FORM WITH OUT BACK/WITH BACK Removing of old U/S back plank of form with back in any position and S&F new 1st class hard wood (Shisham) back plank of size 1800 mm x 150 mm x 25 mm thick fixed with and including 9 Nos 6 mm dia, 65 mm long bolts with nuts & washer made to shape, fixed in position including two coats of french polishing to new wooden surfaces complete all as specified and directed. |
| 79 | DRG No. FD-1027 REPAIR TO FORM WITH OUT BACK/WITH BACK Removing of old U/S MS sheet seat of form w/o back steel and S&F 20 gauge PBI sheet seat made to shape as required including welding complete approx size 1525 mm x 300 mm including one coat of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces all as specified and directed by Engineer-in-charge. |
| 80 | DRG No. FD-1027 REPAIR TO FORM WITH OUT BACK/WITH BACK Removing of old U/S legs stiffener/back & bottom stiffener of form w/o back steel and form with back and S&F new legs stiffener of 25 mm dia/square 16 gauge MS conduit pipe made to shape, size as required at site welded to old frame work complete including one coat of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces all as specified and directed by Engineer-in-charge. |
| 81 | DRG No. FD-1027 REPAIR TO FORM WITH OUT BACK/WITH BACK Removing of old U/S clamps and S&F new clamps of MS flat iron 40 mm x 3 mm length as required at site made to shape fixed with suitable nuts and bolts and washers, fixed in position including one coat of synthetic enamel paint over a coat of red oxide primer including preparation of new surfaces all as specified and directed by Engineer-in-charge. |
| 82 | DRG No. FD-1027 REPAIR TO FORM WITH OUT BACK/WITH BACK Preparation of old surfaces of broken joints and providing running welding for jointing MS conduit pipe, MS angle and flat iron etc complete all as specified and directed by Engineer-in-charge ( Each joint measured separately). |
| 83 | DRG No. FD-1027 REPAIR TO FORM WITH OUT BACK/WITH BACK Removing of old U/S shoes/Caps and S & F new PVC hard rubber shoe/Caps of best quality to conduit pipe legs of form with or without back all as specified and directed by Engineer-in-charge |
| 84 | DRG No. FD-1027 REPAIR TO FORM WITH OUT BACK/WITH BACK M & L for one coat of synthetic enamel paint to steel surfaces including preparation of surfaces all as specified and directed by Engineer-in-charge. |
| 85 | DRG No. FD-106(M), 1037 REPAIR TO STEEL RACK ADJUSTABLE 3 TIER Removing of U/S steel shelves and S&F new shelves of size 3` x 1.5` made out of 20 gauge PBI sheet including fixing complete by means of bolting/welding or riveting etc including one coat of synthetic enamel paint over a coat of red oxide primer all as specified and directed by Engineer-in-charge. |
| 86 | DRG No. FD-106(M), 1037 REPAIR TO STEEL RACK ADJUSTABLE 3 TIER Description all as per item 85 above but shelves of size 3` x 1`-3`` |
| 87 | DRG No. FD-106(M), 1037 REPAIR TO STEEL RACK ADJUSTABLE 3 TIER Description all as per item No. 85 above but shelves of size 3.5` to 4`.0 x 1.5` |
| 88 | DRG No. FD-106(M), 1037 REPAIR TO STEEL RACK ADJUSTABLE 3 TIER Dismantling/taking down old U/S leg of rack steel and S & F new leg of MS slotted holes steel angle iron 40 x 40 x 4 mm and fixed complete by means of bolting/welding or riveting etc including one coat of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface all as specified and directed by Engineer-in-charge. |
| 89 | DRG No. FD-106(M), 1037 REPAIR TO STEEL RACK ADJUSTABLE 3 TIER S&F mild steel corners made out from M.S. sheet 3 mm thick size 75 x 75 mm in triangular shape fixed complete by means of welding/bolting or riveting as per site requirement including one coat of synthetic enamel paint over a coat of red oxide primer all as specified and directed by Engineer-in-charge. |
| 90 | DRG No. FD-106(M), 1037 REPAIR TO STEEL RACK ADJUSTABLE 3 TIER M&L for one coat of synthetic enamel paint including preparation of surfaces and removal of all dents, filling with putty complete all as specified and directed (Rack steel open type). |
| 91 | DRG No. FD-106(M), 1037 REPAIR TO STEEL RACK ADJUSTABLE 3 TIER Description all as per item No 90 above but rack steel close type |
| 92 | DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUM Removing of old existing unserviceable lock and S&F new lock of 6 levers with two keys Godrej pattern with fittings complete all as specified & directed by Engineer-in-charge. |
| 93 | DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUM Removing of old unserviceable handle and S&F new handle chromium plated screw type tightened with nuts and bolts with fittings complete all as specified and directed by Engineer-in-charge. |
| 94 | DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUM Removing of unserviceable 3 way lock device with steel rod and supplying and fixing new three way locking device with 10 mm dia MS steel rods and brass shackle complete with fixing accessories for large steel almirah all as directed by Engineer-in-charge. |
| 95 | DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUM Description all as per 94 but for medium steel almirah. |
| 96 | DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUM Removing of unserviceable leg and S&F new legs of 16 gauge MS sheet complete including one coat of synthetic enamel paint over a coat of red oxide primer all as specified and shown on drawing for almirah large/ medium. |
| 97 | DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUMRemoving of unserviceable shelves of almirah large steel and supplying and fixing new MS sheet shelves made out from 20 gauge PBI sheet including one coat of synthetic enamel paint over a coat of red oxide primer and fixing complete with required clamps all as directed. |
| 98 | DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUM Description all as per item No 97 above but for Almirah Medium Steel |
| 99 | DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUM Removing of unserviceable shutter of almirah large steel and supply and fixing new MS sheet shutter made out from 20 gauge PBI sheet including one coat of synthetic enamel paint over a coat of red oxide primer and fixing complete with mild steel hinges all as specified & directed by Engineer-in-charge. |
| 100 | DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUM Description all as per item No 99 above but for almirah medium |
| 101 | DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUM Removing of unserviceable lock cover plate of almirah med/large and supply and fixing new MS sheet lock cover plate made out from 20 gauge PBI sheet including one coat of synthetic enamel paint over a coat of red oxide primer and fixing complete with screw bolts all as directed by Engineer-in-charge. |
| 102 | DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUM Removing of unserviceable key plate and supplying & fixing new C P key plate with screw bolts all as directed by Engineer-in-charge. |
| 103 | DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUM S&F clamps of suitable size with nuts and bolts with washers for shelves of almirah duly painted with one coat of synthetic enamel paint over a coat of red oxide primer all as specified and directed by Engineer-in-charge. |
| 104 | DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUM Removing of all dents, filling with putty and applying one coat of synthetic enamel paint (1st quality) for steel almirah large all as specified and directed by Engineer-in-charge. |
| 105 | DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUM Description all as per item No 104 above but for almirah medium |
| 106 | DRG NO. FD-1029 REPAIR TO LOCKER BED SIDE STEEL Taking down old U/S shutter and S&F new shutter of PBI sheet 20 gauge as per existing shape and size including one coat of red oxide primer on both side of the shutter complete all as specified and directed by Engineer-in-charge. |
| 107 | DRG NO. FD-1029 REPAIR TO LOCKER BED SIDE STEEL Description all as per item 106 but back. |
| 108 | DRG NO. FD-1029 REPAIR TO LOCKER BED SIDE STEEL Description all as per item 106 but side. |
| 109 | DRG NO. FD-1029 REPAIR TO LOCKER BED SIDE STEEL Description all as per item 106 but partition |
| 110 | DRG NO. FD-1029 REPAIR TO LOCKER BED SIDE STEEL Description all as per item 106 but shelves |
| 111 | DRG NO. FD-1029 REPAIR TO LOCKER BED SIDE STEEL Description all as per item No 106 but legs. |
| 112 | DRG NO. FD-1029 REPAIR TO LOCKER BED SIDE STEEL Taking down old U/S Hasp and stapple and S&F new MS Hasp and stapple chromium plated as per existing shape and size complete all as specified and directed by Engineer-in-charge. |
| 113 | DRG NO. FD-1029 REPAIR TO LOCKER BED SIDE STEEL Taking down old U/S Handle and S&F new MS chromium plated steel Handle 100mm size complete all as specified and directed by Engineer-in-charge. |
| 114 | DRG NO. FD-1029 REPAIR TO LOCKER BED SIDE STEEL M&L for painting with one coat of synthetic enamel paint on old/new surfaces of locker bed side steel, internally and externally including preparation of old/new surface complete all as specified and directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender