Tender For Smart Periodical Service To Md And Otm Accn To Certain Bldgs At Cqb Area, Hq 122 Inf Bde, 122 Signal Centre, Stn Hq, Tcp, Fpo, 52 Aalc, Lao Office, Echs, Bh B Block, arc-biannual rate contract Line, Stn Institute, Vtc, Sainik Auditorium, 4
Tender Value
40 Lakhs
Estimated cost
Bid Submission
07 Nov 2026
19 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas North → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Smart Periodical Service To Md And Otm Accn To Certain Bldgs At Cqb Area, Hq 122 Inf Bde, 122 Signal Centre, Stn Hq, Tcp, Fpo, 52 Aalc, Lao Office, Echs, Bh B Block, arc-biannual rate contract Line, Stn Institute, Vtc, Sainik Auditorium, 48 Bengal Ncc Etc Barrackpore At Under Ge Barrackpore
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 2 | M & L for rendering 15 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 3 | M&L for 15mm thick rendering in cement mortar (1:4), in two layers, under coat of 10 mm thick & top of 5 mm thick, to other than fair faces of brick or concrete wall surfaces, top layer 5 mm thick mixed with water proofing compound @ 200Ml per bag(50Kg) of cement or as per manufacture's instructions, finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound will be measured and paid separately as \\"Supply only\\". |
| 4 | M&L for rendering 5 mm thick in cement mortar (1:3) as in ceiling surface finished even and smooth without using extra cement complete all as specified and as directed. |
| 5 | Supply only liquid water proofing compound complete all as specified and as directed. |
| 6 | M & L for preparation of newly plastered surfaces of walls and applying one coat of Chalk whiting over a coat of 1.5mm thick (average) wall care putty, sanding the surfaces till smooth finish is obtained and finally applying two coats of oil bound distemper complete all specified and as directed. |
| 7 | M&L for preparation of newly plastered surface of ceiling and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed. |
| 8 | M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed. |
| 9 | M&L for preparation of old decorated surfaces of wall and applying one coat of oil bound distemper using roller technique complete all as specified and as directed. |
| 10 | M & L for preparation of old plastered surfaces of ceiling and applying one coat of oil bound distemper complete all as specified and as directed. |
| 11 | M & L for preparation of old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and as directed. |
| 12 | M&L for preparation of newly plastered surface of walls and applying two coats of acrylic emulsion weather coat paint over one coat of primer complete all as specified and as directed. |
| 13 | M&L for preparation of old undecorated plaster surfaces of wall and applying One coat of Acrylic exterior weather coat paint complete all as specified and as directed. |
| 14 | M&L for preparation of old undecorated plaster surfaces of wall and applying One coat of Acrylic exterior weather coat paint with fully automatic airless spray machine of paint application with a flow speed of min 1 Litre per minute having a pressure of 3300 PSI complete all as specified and as directed. |
| 15 | M & L for complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint etc. by skilled labour and applying two coats Oil bound distemper over a coat of Chalk whiting over a coat of 1.5mm thick (average) wall care putty using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 Mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer sander with 1500-2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application. Note: The work pertaining to periodical services and water proofing shall be executed from authorized applicator through manufacturer of which the materials. i.e paint Distemper, Putty etc is proposed to be used by the contractor and approved by Garrison Engineer. |
| 16 | M&L for complete removal of existing finishes/treatment of wall by scrapping with mechanical wall sander (mechanical vacuum suction mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint etc, by skilled labour and applying two coats Acrylic exterior weather coat paint over a priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 litre per minute having a pressure of 3300 PSI, allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and as directed. |
| 17 | M&L for preparation of old painted surfaces of wood or wood based materials of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 18 | M&L for preparation of old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 19 | M&L for preparation of old painted stone, concrete, asbestos cement or plaster surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint (1st quality) complete all as specified and as directed. |
| 20 | M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old work with two or more coats complete all as specified and as directed. |
| 21 | M&L for rewriting/repainting to existing writing letters or figures not exc 30 cm height in block Roman, Italian or Indian letters including stops, comma, arrows, brackets, dashes etc on sign board (Black or yellow base) including two coats of oil paint over a coat white base synthetic enamel paint complete all as specified and as directed. |
| 22 | Removing plant including roots by dismantling of brick work/PCC/RCC including necessary scaffolding any type in any location/position i.e. roof, parapet wall near pipes etc and applying concentrated hydrochloric or sulphuric acid after removing roots for preventing the regrowth and making good of disturbed portion using PCC (1:2:4) type B0 & 10mm thick plaster in cement mortar (1:3) size of disturbed portion 150mm X150mmX200mm complete all as specified and as directed. |
| 23 | Dismantling of 110 mm dia breaking up drain pipes (Salt glazed ware, AC or PVC SWR) pipe jointed in any type and taking out from wall/ceiling/floor/trenches and any position complete all as specified and as directed. |
| 24 | S & F 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls with clamps complete all as specified and as directed. |
| 25 | All as per item No 24 here in before but using old serviceable pipe obtain from item no 23 complete all as specified and as directed. |
| 26 | Dismantling of 75 mm dia breaking up drain pipes (Salt glazed ware, AC or PVC SWR) pipe jointed in any type and taking out from wall/ceiling/floor/trenches and any position complete all as specified and as directed. |
| 27 | S & F 75mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls with clamps complete all as specified and as directed. |
| 28 | All as per item No 27 here in before but using old serviceable pipe obtain from item no 26 complete all as specified and as directed. |
| 29 | S & F 110 mm dia PVC (SWR) bends of any radius complete all as specified and as directed. |
| 30 | S&F 110 mm dia PVC (SWR) bends with access door any radius complete all as specified and as directed |
| 31 | S & F 75 mm dia PVC (SWR) bends of any radius complete all as specified and as directed. |
| 32 | S&F 75 mm dia PVC (SWR) bends with access door any radius complete all as specified and as directed |
| 33 | S&F 110mm dia PVC (SWR) junction single, (single T) equal or unequal provided with access door complete all as specifiec and as directed. |
| 34 | S&F 110mm bore PVC (SWR) branch piece , single (single Y) equal or unequal with access door complete all as specified and as directed |
| 35 | S&F 110mm bore PVC (SWR) branch piece, double (double Y) equal or unequal provided with access door complete all as specified and as directed |
| 36 | S&F 75mm dia PVC (SWR) junction single, (single T) equal or unequal provided with access door complete all as specifiec and as directed. |
| 37 | S&F 75mm bore PVC (SWR) vent cowl complete all as specified and as directed. |
| 38 | S&F in repairs, 75 mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender