Tender For Special Repair To Path, Compound Wall And Fencing Under Ge (Af) No2 At Af Stn Jodhpur
Tender Value
43.70 Lakhs
Estimated cost
Bid Submission
07 Nov 2026
20 days left
EMD
87400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jodhpur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Path, Compound Wall And Fencing Under Ge (Af) No2 At Af Stn Jodhpur
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation not exc. 30cm averaging 15 cm deep in any type of soil getting out complete all as specified and as directed by Engineer-in-Charge. |
| 2 | Removing surplus soil to a distance exc 250m but n.exc 500m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed by Engineer-in-Charge. |
| 3 | M&L for hardcore of broken stone or boulders of gauge not exceeding 63 mm, deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rolled to a true surface complete all as specified and directed by Engineer-in -Charge. |
| 4 | M&L for 75 mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in sub base, surface finished fair and even, complete all as specified & directed. |
| 5 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified & directed. |
| 6 | M&L for Prepolished chequered cement concrete tiles with grey cement & pigment of size 30cmx30cmx22 to 25mm thick set & jointed with cement slurry over & including 15 mm thick bedding layer of cement sand mortar (1:6) and pointed with grey cement complete all as specified and as directed by Engineer-in-Charge. |
| 7 | M&L for preparation of old surfaces and applying one coat of weather coat (smooth classic, any colour as directed) with anti fungal exterior coating weather proof emulsion paint as specified and directed. |
| 8 | M&L for PCC 1:2:4 type B2 using 40mm graded stone aggregate as in sides filling and mass concrete complete all as specified and directed by Emgr-in-charge. |
| 9 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. |
| 10 | M & L for preparation of new undecorated plastered/concrete surface by rubbing down and applying two coat of synthetic enamel poaint over a coat of primer over 10cm girth or width,all as specified. |
| 11 | Demolition of cement concrete ,(reinforced) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and as directed. |
| 12 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 13 | M&L for PCC type C-2 , 1:3:6 (40mm aggregate) in walls , boundary pillars and posts (including caps and bases)complete all as specified and dierected by Engr-in-charge. |
| 14 | S&F Mild steel as in fencing posts, struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, drilling, bolting or riveting etc. including necessary welding where required , conforming to Fe-290 Gde E-165 complete all as specified and as directed by Engineer-in-charge. |
| 15 | Dismantling steel barbed wire of any description fixed to any type of fencing posts complete all as specified and as directed by Engineer-in-Charge. |
| 16 | Dismantling Concertina wire fencing of any description fixed to any type of fencing posts complete all as specified & directed. |
| 17 | M&L for Galvanised,2 strands, steel Barbed wire2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of strand rails straining bolts, Including securing or tying at crossings with the provision of galvonised mild sleelwire, staples or steel pins etc. as directed (each line wire to be measured) all as specified and as directed. |
| 18 | S&F razor type concertina col hot galvanised spring tensile wire fixed on Y shape iron having barbed wire and coil having 6-8RM per coil of 900mm Dia and min weight 7.5Kg/Coil etc all as spefified ans as directed. |
| 19 | Dismantling fencing wire mesh, any type complete all as specified and directed. |
| 20 | Supply only GI chain link fencing including line wires any mesh and any size and type to any type of standards rails etc complete all as specified and directed. |
| 21 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed. |
| 22 | M&L for two coats of synthetic enamel paint over a coat of red oxide primer on newly untreated surfaces of steel over 10 cm in width or girth not otherwise described. |
| 23 | M&L for Mild steel screw bolt 5 to 10 mm dia of shank (machine made) with hexagonal or square heads at one end screwed at other, screwed both end to be fitted with washers and one hexagonal or square nut n. exc 10 cm long complete all as specified and as directed . |
| 24 | Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 25 | M & L preperation of new steel surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint with two coat synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 26 | Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified & directed. |
| 27 | Precast cement concrete (1:3:6), type C-1 (using 20 mm graded stone aggregate) solid block masonry exc 10cm and set in cement and sand mortar (1:6), and , complete all as specified and directed. |
| 28 | M&L for PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in sides filling and mass concrete , coping/benching complete all as specified and directed by Engr-in-charge. |
| 29 | Taking down cement plaster or cement lime plaster on brick drain/PCC/stone surfaces including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed by Engineer-in-charge |
| 30 | Rendering 15 mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 mixed with WPC as per manufacturer's instruction and finished the surfaces even and smooth without using extra cement complete all as specified and as directed (Note:- WPC will be measured and paid for separately. |
| 31 | M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint over a coat of chalk whiting, complete, all as specified & directed. |
| 32 | Supply only integral water proofing compound where as required in Cement Mortar complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender