Tender For maintenance Of electrical installation In Nrb At Chandigarh (Replacement Of Defective/ Burnt Out Lights & Switchgear And Painting Of Cement Collar, Pedestal Etc. On Various Cycle Tracks In Various Sectors Due To Vvip Visit At Chandigarh).
Tender Overview
Project Description
Tender for maintenance Of electrical installation In Nrb At Chandigarh (Replacement Of Defective/ Burnt Out Lights & Switchgear And Painting Of Cement Collar, Pedestal Etc. On Various Cycle Tracks In Various Sectors Due To Vvip Visit At Chandigarh).
BOQ
| Sl. No. | Item Description |
| 1 | Supplying and drawing following sizes of FR PVC insulated aluminium conductor, multi strand wire in the existing surface/ recessed steel/ PVC conduit as required. |
| 2 | 3 x 1.5 sq. mm |
| 3 | DSR Item No. 13.46 Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 Itr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 4 | DSR Item No. 2.4 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB/ RCCB/ Isolator). |
| 5 | 4 way (4 + 12) Double door |
| 6 | DSR Item No. 2.10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 7 | Single pole |
| 8 | Triple pole and neutral |
| 9 | S/E of Cement Collar and Jn. Box at the base of the pole with the detailed specification as given below: S/E of Thermo Plastic cable Jn. Box IP55 of size 200x160x98 mm deep (approximate) with 4 nos. thermal block suitable for 1 no. incoming and 3 nos. outgoing cables. (As per Complete Item No. 5 of the DNIT). |
| 10 | DSR Item No. 8.13LED Street light fixture, powder coated pressure die cast aluminum body (System lumen efficacy ≥120 <135 lm/Watt)Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, (As per Complete Item No. 6 of the DNIT). |
| 11 | 15 Watt |
| 12 | Supply & Erection of 3 mm thick white glazed bakelite sheet on existing M.S. box. The job includes the cost of sheet and making holes & cutting and fixing with screws as required to complete the job. The make should be Super Hylam / Formica / GreenLam only. |
| 13 | Spray painting of steel shutter and other outdoor type pedestal etc. The steel shutter/ rusted outer cover of switchgear etc. in pedestal shall be given anti-rust/ grease treatment and then spray painted with one coat of primer & 2 coats of superior quality of grey paint as approved by Engineer-in-charge of work. |
| 14 | Supply and erection of sheet metal cubical pedestal of suitable dimensions made from 50 mm X 50 mm X 6 mm thick M.S angle iron frame, covered with 1.6 mm thick M.S. sheet duly welded on five sides and front side hinged complete with locking arrangement with 4 Nos. switchgear supporting members each of M.S. flat 50 mm X 6 mm thick of suitable length duly welded. (As per Complete Item No. 9 of the DNIT). |
| 15 | Cubical size 900 mm X 600 mm X 350 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender