Tender For Repair To Compound Wall, Fencing, Drain, Paths, Culverts Etc In Md Accn Under Age B/R Ii At Chandimandir Mil Stn
Tender Value
49 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
9 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Panchkula → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair To Compound Wall, Fencing, Drain, Paths, Culverts Etc In Md Accn Under Age B/R Ii At Chandimandir Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling post or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground, complete all as directed. |
| 2 | Dismantling fencing wire mesh of any type complete all as specified & directd. |
| 3 | Demolition of cement concrete in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified. |
| 4 | Dismantling of Asbestos cement/steel sheets (corrugated, semicorrugated sheets) from roof coverings complete all as specified and directed. |
| 5 | Excavation in post holes n.exc 0.50 cu m getting out, returning, filling and ramming earth, watering and removing surplus soil not exc 50 m I any type of soil complete all as specified and directed. |
| 6 | Plain cement concrete 1:3:6 type C-1 using 40mm graded crushed stone aggregate as in foundation, for fencing post complete all as specified & directed. |
| 7 | Mild steel angle iron post as in fencing posts and struts including cut to length, cutting top to shape as directed drilling holes notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290 Gde E-165 and embedded in concrete complete all as specified and directed. |
| 8 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed |
| 9 | Mild steel framed work as in doors or gates of angles or other sections with gusset plates complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with including hooks and hinges (excluding of covering steel sheeting) fastening, locking arrangement, etc conforming to Fe-410-O or Fe-310-O all as specified and directed. |
| 10 | Supply only chain link fencing of any type and size of dia n. exc 4.00 mm dia galvanized steel wire, size of mesh as approved complete all as specified and directed. Note: - Weight of chain link fencing shall be ascertained by BOO convened by the GE. |
| 11 | Mild steel screw bolt (machine made) with hexagonal at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal exc 5cm but n.xc 10cm long, diameter of shank 5 to 10mm, complete all as specified and directed. |
| 12 | Mild steel round bars 10mm dia and over cut to length, as fixed in chain link fencing along the length as required complete all as specified and directed. |
| 13 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed. |
| 14 | 1.50 mm thick fibre glass reinforced translucent plain coloured sheeting with fixed with coach screw and washer in roof wall, fencing etc, fixed as in repair complete all as specified and directed. |
| 15 | Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts including, securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc. (each line wire to be measured) fixed in repair including dismentling complete all as specified and directed. |
| 16 | Preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed. |
| 17 | Demolition of brickwork built in cement mortar or cement lime mortar, including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed |
| 18 | Plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation, sub base flooring, filling and mass concrete complete all as specified & directed. |
| 19 | Brick work with sub class ‘B’ bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 but except bricks, complete all as specified & directed. |
| 20 | Brick work straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 but except bricks, complete all as specified & directed. |
| 21 | Brick work with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified & directed. |
| 22 | Plain cement concrete type C-1 (1:3:6) using 20mm graded crushed stone aggregate as in seismic and other similar bands, shelves, copings, bed plates, hold fast, plinth courses and the like finished fair & even, including necessary formwork complete all as specified. |
| 23 | Taking down existing plaster of any description on brick wall/ concrete surface including racking out joints, hacking for key, scrubbing down with water etc complete, all as specified and directed. |
| 24 | Rendering 15mm thick in Cement and Sand mortar 1:4 over brick or concrete surfaces finished even and fair without using extra cement complete, all as specified and directed. |
| 25 | 15 mm thick rendering in cement and sand mortar 1:4 on surface other than fair faces of brick work or concrete surfaces finished fair and even complete all as specified and directed. |
| 26 | Flush pointing to brick walls in cement mortar 1:4 complete all as specified & directed |
| 27 | Preparation of new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed. |
| 28 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid dry and pointed complete all as specified and directed. |
| 29 | Factory made machine pressed, rubber moulded, prepolised (glazy finish) coloured, precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement and pigment complete all as specified and directed. |
| 30 | Factory made machine pressed, rubber moulded, prepolised (glazy finish) coloured, precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment complete all as specified and directed. |
| 31 | Factory made machine pressed, rubber moulded, prepolised (glazy finish) coloured, precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 40 mm thickness M-35 grade with grey cement and pigment complete all as specified and directed. |
| 32 | Factory made machine pressed, rubber moulded, prepolised (glazy finish) coloured, precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 40 mm thickness M-35 grade with grey cement and pigment complete all as specified and directed. |
| 33 | Pre-polished, glossy finish, factory made machine pressed, coloured chequered cement concrete tiles 300mm x 300mm or 400 x 400mm and 22-25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement with pigment to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 34 | 15-18mm thick Granite work (of any type table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in, set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite compelte all as specified and directed. |
| 35 | Rounding of / moulding to edge (half round) of stone of any description including rubbing and machine polishing (Granite finish), complete all as specified and directed. |
| 36 | Precast cement concrete louvers and jallies, 30 to 35 mm thick (measured solid) type B0 1:2:4 (12.5mm aggregate) set in cement mortar (1:4), including all mouldings but excluding frame including dismantling old jalli complete all as specified & directed. |
| 37 | Precast reinforced cement concrete type B-I, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area n exc 100 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed complete all as specified and directed. |
| 38 | Preparation of old decorated concrete/ brick/stone /interlocking tile surface exc 10 cm width or girth and applying one coat of synthetic enamel/ Terracotta paint of any shade / colour complete all as specified and directed. |
| 39 | Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws includign making good groover cement mortar complete all as specified and directed complete all as specified and directed. |
| 40 | Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 41 | Steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161- 1979 grade St.-240, including shop coat of zinc chrome red oxide primer complete all as specified & directed. |
| 42 | 75mm thick Plain cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in hardstanding etc including finishing the surface even and fair without using extra cement and including finishing surface by brooming or chequered finish including providing groove/joints filled with preformed bituminous filler complete all as specified & directed by engr-in-charge. |
| 43 | Welding of old steel sections in repairs exc 2.5 cm but n. exc. 5 cm in length, thickness of metal to be welded exc 6 mm but n. exc. 9mm complete all as specified of old steel sections and directed by engr-in-charge. |
| 44 | Pre cast factory made RCC drain covers of size 600mm x 1200mm x 100mm thick for medium duty, including rcc frame, with reinforcement as per IS specification and MS frame set in cement mortar 1:4 in both items add incl removal of existing broken covers complete all as specified and directed. |
| 45 | Pre cast factory made RCC man hole covers of size 600mm x 1000mm x 100mm thick for medium duty, including MS frame set in cement mortar 1:4 in both items add incl removal of existing broken covers complete all as specified and directed. |
| 46 | Coloured non skid porcelain endura tiles exterior grade 300x300x10mm thick heavy duty as in floor, set and jointed in neat slurry and pointed in coloured cement to match the colour of tiles over and including screed bed or bedding layer of 15mm thick in cement mortar 1:4, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender