Tender For Special Repair To Bldg No P-5/01 To P-5/08 At Bhagat Enclave Under Age B/R-Ii & Age E/M Under Ge Babina
Tender Value
48.36 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
9 days left
EMD
96720
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jhansi → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No P-5/01 To P-5/08 At Bhagat Enclave Under Age B/R-Ii & Age E/M Under Ge Babina
BOQ
| Sl. No. | Item Description |
| 1 | Taking up or down existing 15 mm dia bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed. |
| 2 | Taking up or down existing 20 mm dia bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed. |
| 3 | Taking up or down existing 25 mm dia bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed. |
| 4 | Supplying and laying of CPVC pipes of outer diameter 20mm of grade SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified |
| 5 | Supplying and laying of CPVC pipes of outer diameter 25mm of grade SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified |
| 6 | Fixing only old steel tubing 20mm and connections obtained from taking down in new or old position fixed to wall, ceiling or laid in floor with new fittings complete all as specified and as directed |
| 7 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting n.exc10 cm girth in brick walls complete all as specified and directed |
| 8 | Dismantling of PVC water tanks & removing to store exc 250 & n exc 500 litres complete all as specified and directed |
| 9 | S&F rotational moulded multilayer HDPE water storage tank of 3 Layer white color of 1000 ltrs capacity (Cylindrical vertical with closed top) fixed in position complete all as specified including 02 Nos CPVC tank adapter of size 20 mm dia & 20 mm dia PTMT float valve with epoxy coated Aluminium rod with high density plastic float ball etc, complete all as specified and as directed. |
| 10 | S&F 20mm dia CPVC Ball valve fixed to CPVC pipe complete all as specified and as directed. |
| 11 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and complete all as specified and as directed. |
| 12 | Taking down cement or cement lime plaster OR terrazzo dado in any thickness on brick or stone wall etc. including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 13 | M&L, for PCC 1:2:4 type B-0 using 12.5 mm gradesd stone agg as in levelling course of floors of 25 mm thick complete all as specified and directed. |
| 14 | M&L for vitrified , (GVT GLOSSY FINISH ) coloured and printed tiles of 8 to 10 mm thick (Square / Rectangular ) polished area of each tiles SIZE (600MMX1200 MM) as in flooring over and including 15 mm thick cement screed in (1:4 ) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.Note:- Pattern of tiles shall be as approved by AGE/GE . |
| 15 | M&L for vitrified , (GVT GLOSSY FINISH ) coloured and printed tiles of width as directed and 8 to 9 mm thick as in skirting fixed over and including 10 mm thick cement screed in (1:4 ) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.Note:- Pattern of tiles shall be as approved by AGE/GE. |
| 16 | M&L for joint free glazed Coloured tiles 300x600, 7mm thick for work on vertical surface, set & jointed in cement slurry and pointed in white or coloured cement to match etc including 10 mm screed bed with CM(1:3) complete all as specified and as directed Note:- Pattern of tiles shall be as approved by AGE/GE. |
| 17 | M&L for non skid Coloured joint free ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.06sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc and including 15 mm screed bed with CM(1:6) complete all as specified and as directed.Note:- Pattern of tiles shall be as approved by AGE/GE. |
| 18 | M&L 18-20 mm thick pre-polished Granite slab, machine cut, for floors/ shelves, cooking platforms, window cills, steps, jambs and pillar top laid over & including 20mm thick screed in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone complete all as specified & directed. |
| 19 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 20 | M&L Machine cut kota stone slab flooring 18-20mm thick over and including 20mm thick cement screed bed in CM 1:6 laid laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete |
| 21 | M&L Machine cut kota stone slab flooring 18-20mm thick in riser of steps,skirting, dado & pillar over and including 10mm thick rendering in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified. |
| 22 | M&L Precast cement concrete type B0 (1:2:4) using 12.5 mm graded aggregate Set in CM(1:4) louvres and jallies, 35mm thick (measured solid), including all mouldings but excluding frame complete all as specified and directed |
| 23 | M&L for demoition of cement concrete (unreinforced) in ground floors and pavings n exe 15 Cmthickness (below or above ground level) complete all as specified and directed |
| 24 | M&L for demolition of cement concrete (unreinforced) in any description and in any position etc complete all as specified and directed |
| 25 | M&L for demolitin of RCC as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work incl cutting of reinforcement to facilitate demolition complete all as specified and directed |
| 26 | Dismantiling of stone slabs and tiles (Kota stone etc.) of any discription or any thickness in floors, aprons, skirting, dado, pcc tiles at roof etc. laid bedded and pointed in any mortar complete all as specified and directed. |
| 27 | M&L for 75mm thick cement concrete type C-1, 1:3:6 (20mm graded aggregate) as in plinth protection with soucer drain finished even and smooth without using extra cement complete all as specified and directed. |
| 28 | Demolition of brick work built in cement mortar complete all as specified and directed. |
| 29 | M&L Brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in cm (1:6), rise of hight for brick wall complete all as specified and as directed. |
| 30 | M&L Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed. |
| 31 | M&L RCC type B0 (1:2:4) using 12.50 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like complete all as specified and directed |
| 32 | M&L RCC type B0 (1:2:4) using 12.50 mm graded aggregate in RCC chhajjas complete all as specified and directed. |
| 33 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work like RCC chhajjas; not exc. 200mm thick (Horizontal or sloping) Rough finished surfaces of concrete flat complete all as specified and directed. |
| 34 | M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed |
| 35 | M&L renderig 5mm thick in cement mortar 1:3 on ceiling surface and finished even and smooth with out using extra cment complete all as specified and as directed. |
| 36 | M&L for rendering 15mm thick on fair faces of wall even and smooth finish without using extra cement on conc/brick surfaces in CM 1:6, complete all as specified and as directed. |
| 37 | M&L for 15 mm thick rendering in cement mortar (1:4) on brick / concrete/ stone surfaces finished even and fair without using extra cement complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately under appropriate item of BOQ as \\"Supply only \\" |
| 38 | Supply only Liquid water proofing compound complete all as specified and as directed. |
| 39 | M&L for preparation of new plastered surface and applying three coat of white wash on ceiling complete all as specified and as directed. |
| 40 | M&L for Preparation of new plastered surfaceof wall and applying two coat of OBD over a coat of alkali resistant primer over one coat of putty complet all as specified and as directed. |
| 41 | M&L for preparation of new plastered surface of external wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over a coat of plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even & smooth complete all as specified and directed. complete all as specified and directed. |
| 42 | M&L preparation of old ceiling surface and applying one coat of white wash on old decorated surface surface complete all as specified and as directed. |
| 43 | M&L for complete removal of existing treatment from surface of wall all as specified and as directed by the Engineer-in-Charge |
| 44 | M&L for applying two coat of OBD on internal wall surface over a coat of alkali resistant primer over one coat of putty complete all as specified and as directed. |
| 45 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over a coat of plaster of paris putty of 1 mm thickness over old external plastered surface to prepare the surface even & smooth complete all as specified and directed. |
| 46 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each complete all as specified and as directed. Note: Including cutting of hole as required at site for taking down and making good of distrubed portion with brick work of CM 1:6 or PCC (1:3:6) type C1. |
| 47 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exe 1.5 Sqm but n exc 4 Sqm each etc complete all as specified and as directed.Note: Including cutting of hole as required at site for taking down and making good of distrubed portion with brick work of CM 1:6 or PCC (1:3:6) type C1. |
| 48 | S & F Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including 5 mmm glass and required accessories.Area not exceeding 2.00 sqm each (Note: The unit rate quoted by contractor included cost of glass and includes all other connected accessories.) etc complete all as specified and directed. Please Enable Macros to View BoQ information |
| 49 | S & F Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including 5 mmm glass and required accessories.Area not exceeding 2.00 sqm each (Note: The unit rate quoted by contractor included cost of glass and includes all other connected accessories.) etc complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender