Tender For Comprehensive Maintenance At Sapper Enclave & Aor Of Age B/R-Ii Ge (South) Udh Ur
Tender Value
48 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
5 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Reasi → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Comprehensive Maintenance At Sapper Enclave & Aor Of Age B/R-Ii Ge (South) Udh Ur
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: MILITARY ENGINEERING SERVICES (GE (SOUTH) UDHAMPUR) NAME OF WORK : COMPREHENSIVE MAINTAINENCE AT SAPPER ENCLAVE & AOR OF AGE B/R-II GE (SOUTH) UDHAMPUR Contract No: CA NO : GE/S(U)- 111/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Taking down chowkhat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each including cutting holes for taking out hold fasts, dismantaling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified and directed by Engr-in-charge. |
| 3 | Taking down chowkhat or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n.exc 4 Sqm each including cutting holes for taking out hold fasts, dismantaling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified and directed by Engr-in-charge. |
| 4 | Taking down shutters of any description exceeding 1 square metre not exceeding 2 square metre each complete all as specified and directed by Engr-in-charge. |
| 5 | Taking down cement plaster of any description on brick/stone walls or concrete surfaces including racking out joints, hacking for key scrubbing down with water etc on walls and ceiling, complete all as specified and directed by Engr-in-charge. |
| 6 | Taking down bib taps/pillar taps/mixers/shower/water tanks etc and making good and serviceable and refixing to same including minor repairs and repair/replacement of accessories like spindle, rubber kit, screws and similar items to make serviceable and all plumbing works etc complete all as specified and directed by Engr-in-charge. |
| 7 | Taking down of old tank exc 250 ltr but n exc 500 ltrs and removing from site complete all as specified and directed by Engr-in-charge. |
| 8 | Taking down of old tank exc 500 ltr but n exc 1000 ltrs and removing from site complete all as specified and directed by Engr-in-charge. |
| 9 | Taking down of old GI tubing 15mm dia complete all as specified and directed by Engr-in-charge. |
| 10 | Taking down of GI tubing 20mm dia complete all as specified and directed by Engr-in-charge. |
| 11 | Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed by Engr-in-charge. |
| 12 | Dismantling wall & ceiling boards of any description and thickness including cover fillets, complete all as specified and directed by Engr-in-charge. |
| 13 | Demolition of cement concrete, unreinforced, in ground floors and paving's not exceeding 15cm thickness below or above ground level, complete all as specified and directed by Engr-in-charge. |
| 14 | M & L for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-charge. |
| 15 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube and fixed in opening as per specification and drawing complete all as specified and directed by Engr-in-charge. |
| 16 | S&F Factory made solid panel PVC Moulded door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. Clause No. 8.B.1 to 8.B.10 and drawing on page No. 156 & 157 of MES SSR-2010 Part-II complete all as specified and directed by Engr-in-charge. |
| 17 | M&L for pressed steel frames for doors made out of 1.25mm thick MS sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate ,12mm bar thresh hold etc. complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed by Engr-in-charge. |
| 18 | All as per item No 16 above but frame size 105 x 60 mm complete all as specified and directed by Engr-in-charge. |
| 19 | M&L for 35 mm thick factory made, 2nd class hard wood , plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated all as specified and directed by Engr-in-charge. |
| 20 | M&L for factory made 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and directed by Engr-in-charge. |
| 21 | S&F 35mm thick Flush shutters, solid core construction, with Block board core plywood face panels, commercial type on both sides & one face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed by Engr-in-charge. Make : Century/Green ply/Kit ply/Archid Note : - (i) Teak/Walnut veneer and satin lacquered finish plus brass trim. (ii) all edges shall be sealed with hardwood lipping or PU sealer with polish. |
| 22 | S&F 1mm thick wood grain printed Sunmica/PVC sheet (Design as approved by Engr in Charge) fixed or laid on to flush doors by using rubber based adhesive, supplying & fixing at site as per specification complete all as specified and directed by Engr-in-charge. |
| 23 | M&L for aluminium alloy powder coated (50 micron) anodized door frame of section 100 mm x 44 mm x 2mm thick, door shutter of aluminium section of size 85 mm x 44 mm x 2 m thick, top rail and both styles of size 100mm x 44 mm x 2mm thick, lock rail and bottom rail of size 115 mm x 44 mm x 2 mm thick incl. aluminium anodized snap beading and rubber packing,& 5. mm thick colour designer glass incl. , 200 mm long tower bolt-2 Nos, 200 mm long Alm handle- 02 Nos on each leaf, 4 lever lock brass 100 mm long mortice lock & double action floor door spring heavy duty suitable for shutter for each leaf complete all as specified and directed by Engr-in-charge. |
| 24 | S&F Powder coated (50 micron of approved colour) three track Aluminum anodised shutter window (glazed and wire gauge) fixed type with aliminium window frame or chowkat 1.50 mm thick sheet & section aluminium anodised of size 100 mm x 44.50 mm and window shutter frames made of (middle, top rail, bottom) and styles 1.5 mm thick aluminium anodised sheet & section of size 44.5 x 44.5 mm including all fittings such as rubber gasket aluminum glazing clips locking cabinet and 75 mm handle and including 4 mm thick tinted glass pane in panes glazed shutter fixed with rubber gasket and glazing clip/aluminium beads and with stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel staples on gauge shutter including all accessories complete all as specified and directed by Engr-in-charge. |
| 25 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) |
| 26 | S&F Aluminium alloy powder coated (50 micron) anodized frame of section 85mm x 44mm x 2mm thick as in aluminium partition including aluminium anodized snap beading and rubber packing, glazed with 5mm thick tinted glass / partly with 12mm thick prelaminated particle board, fixed in repairs complete all as specified and directed by Engr-in-charge. |
| 27 | S&F 5mm glass (design on glass as approved by Engr in Charge) as in windows, partitions, automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed by Engr-in-charge. |
| 28 | S&F in repairs Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples all as specified and directed by Engr-in-charge. |
| 29 | Providing and fixing premium quality Zebra Roller Blinds made of fabric with alternating translucent and opaque bands, complete with powder-coated aluminium headrail, bottom weight bar, operating mechanism, brackets, fasteners and all necessary accessories, properly installed and aligned as per approved sample, colour and design, complete in all as specified and directed by Engr-in-charge. (Note Span up to 2.5 mtr) |
| 30 | S&F 100mm size butt hinges (medium weight) colled rolled mild steel, complete all as specified and directed by Engr-in-charge. |
| 31 | S&F Stainless steel handles cast type anodized 150mm size, complete all as specified and directed by Engr-in-charge. |
| 32 | S&F 250mm size stainless steel sliding door bolt with hasp, stapple ( bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed by Engr-in-charge. |
| 33 | S&F stainless steel 150mm size barrel tower bolt of extruded section and fixed, complete all as specified and directed by Engr-in-charge. |
| 34 | M&L for Floor door stopper of 140mm size of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in repair complete all as specified and directed by Engr-in-charge. |
| 35 | S&F Aluminium (die cast body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repair complete all as specified and directed by Engr-in-charge. |
| 36 | S & F in repairs aluminium anodised barrel tower bolts of extruded section with 200 mm long bolt all as specified and directed by Engr-in-charge. |
| 37 | S & F in repairs aluminium alloy, sliding door bolt 300 mm long with hasp, staple ( bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified and directed by Engr-in-charge. |
| 38 | S & F in repairs aluminum handles cast type, anodised, 150 mm size all as specified and directed by Engr-in-charge. |
| 39 | S & F in repair mild steel, 300 mm, ordinary rat tail rod pattern door spring including roller and roller plate, fixed to frame all as specified and directed by Engr-in-charge. |
| 40 | S & F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed by Engr-in-charge. |
| 41 | S&F in repairs for framed work such as grill, gratings, etc with ends of bars shouldered and/or riveted or forged in to spikes, framed guard bars, barred iron doors, ladders, water tank staging, Railing framed balusters and similar work conforming to Fe 290 Gde E-165 all as specified and directed by Engr-in-charge. |
| 42 | S & F in repairs 18/19 mm thick prelaminated particle board, exterior grade , prelaminated one side with decorative choice lamination and other side balancing white lamination , fixed with screws to timber frame work as in kitchen cabinets and cupboard shutters all as specified and directed by Engr-in-charge. |
| 43 | S & F in repairs18/19mm thick block boards grade 1 quality exterior grade commercial type fixed with screws to timber frame work including decorative laminate type 1 of surface finish colour and pattern as approved with adhesive 0.90 mm thick all as specified and directed by Engr-in-charge. |
| 44 | S&F continuous (piano) hinges, mild steel,bright finishor electrogalvanised width of flaps (when open) 30 mm complete all as specified and directed by Engr-in-charge. |
| 45 | S & F Hetich softcloser hinges of stainless steel premium quality complete all as specified and directed by Engr-in-charge. |
| 46 | S&F 100mm hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engr-in-charge. |
| 47 | S&F magnetic catches brass body and striking plate including letting in and fixed suitable for cupboard shutters complete all as specified and directed by Engr-in-charge. |
| 48 | S & F 75 mm decorative Brass handles, cast type, polished bright all as specified and directed by Engr-in-charge. |
| 49 | S & F in repairs stainless steel cutlery organiser set of size 0.45 x 0.60 fixed in drawer of kitchen cabinets including stainless steel telescopic channels all as specified and directed by Engr-in-charge. |
| 50 | S & F in repairs stainless steel two shelves bottle pull outs set of size 0.60 x 0.60 fixed in drawers of kitchen cabinets including stainless steel telescopic channels all as specified and directed by Engr-in-charge. |
| 51 | S & F in repairs stainless steel plate basket set of size 0.45 x 0.60 fixed in drawers of kitchen cabinets including stainless steel telescopic channels all as specified and directed by Engr-in-charge. |
| 52 | S & F in repairs stainless steel three shelves oil pull out basket of size 0.45 x 0.60 fixed in drawers of kitchen cabinets including stainless steel telescopic channels all as specified and directed by Engr-in-charge. |
| 53 | S & F in repairs telescopic channels 60cm long and 25mm wide with necessary screws all as specified and directed by Engr-in-charge. |
| 54 | S&F for brass mortice lock of 4 levers 100 mm thick fixed in aluminium door complete all as specified and directed by Engr-in-charge. |
| 55 | Providing & fixing false ceiling with Semiperforated 12mm thick micro tegular edged GRG false ceiling tiles at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in truehorizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items ( @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and all as specified and directed by Engr-in-charge. |
| 56 | M&L for granite stone 18-20mm thick (table rubbed and polished) in window cills, cooking platforms and the like not less than 1 Sqm (in one piece), laid over 15mm thick layer of cement mortar 1:3 after roughening of existing concrete surface and applying a layer of neat cement slurry @ 3Kg/Sqm including pointing in white cement 1:2 using marble dust with admixture of pigments to match with shade of stone, including demolition of stone slabs and tiles of any description or thickness in floors etc. laid, bedded and pointed in any mortar complete all as specified and directed by Engr-in-charge. |
| 57 | S&F rolled mild steel Fe-410w (Gde-E-250) quality 'B' Roof trusses (framed ) , trussed, purlins, crane gantries , rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces cleats etc complete all as specified and directed by Engr-in-charge. |
| 58 | M&L for 0.50mm thick prepainted galvalume aluminium zinc coated GI based semi corrugated/profile steel sheeting of any colour, having tensile strength of 550MPA as in roof covering, wall cladding with self tapping screws or 'L' type of 'J' type or cranked hook bolts in lieu of screws as per manufacturers instructions including dismantling translucent PVC or Asbestos cement corrugated sheets including ridges as in roof coverings, complete all as specified and directed by Engr-in-charge. |
| 59 | S&F for 0.50mm thick prepainted galvalume aluminium zinc coated GI based plain steel sheeting of any colour, having tensile strength of 550 Mpa as in roof covering, wall cladding with self tapping screws or 'L' type or 'J' type or cranked hook bolts in lieu of screws as per manufacturers instructions, including dismantling translucent PVC or Asbestos cement corrugated sheets including ridges as in roof coverings, complete all as specified and directed by Engr-in-charge. |
| 60 | M & L for providing cement concrete 1:2:4 Type B1 using 20mm graded aggregate as in lintels up to 1.5m clear span, cills,seismic and other similar bands, plinth courses, copings, Bed blocks, and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed by Engr-in-charge. |
| 61 | S&F in repairs solid PVC wall lining (wall panelling design and colour shall be approved by Engr in Charge) consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site including all fixing accessories like PVC frames/fillets etc on PVC frame, complete all as specified and directed by Engr-in-charge. |
| 62 | Roughening surfaces of old concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3 kg/Sqm including 15mm thick screeding in CM (1:4) finished even and smooth mixed with water proofing compound (WPC shall be measured and paid separately). Applying bituminous primer on roof surfaces @ 0.40 ltr/Sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm and provide modified polymeric APP (Atactic Polypropylene) Modified Polymeric Membrane with 100 micron high molecular high density polyethylene film. Min wt of membrane will be 3.50 Kg/Sqm and bonded completely to the surfaces with min end overlap of 15 cms and side lap 75 mm (overlaps to be bounded with thermo fused by flame) and over APP applying one coat of hot blown bitumen 85/25 @ 1.2 Kg/Sqm blinded with fine sand in dry condition @ 0.5 Kg/Sqm, complete all as specified and directed by Engr-in-charge. |
| 63 | M & L for 50 mm thick cement concrete 1:4:8 type D-2 (40mm grade aggregate) as in sub base complete all as specified and directed by Engr-in-charge. |
| 64 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpaths, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed by Engr-in-charge. |
| 65 | M&L for 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engr-in-charge. |
| 66 | M&L for chequered cement concrete (glossy finish) tile 300 mm x 300 mm x 25 mm thick set jointed and pointed in neat cement slurry in floor with grey cement and pigment all as specified and directed by Engr-in-charge. |
| 67 | S&F Vitrified Paver tiles tiles of size n exc 0.36Sqm of 10mm thick as in floors and over jointed with neat cement slurry and pointed in coloured cement to match the surface of tiles, complete all as specified and directed by Engr-in-charge. |
| 68 | M&L for Light shade double charged vitrified tile 8-10 mm thick (Square / rectangular) polished , area of each tiles not exceeding 0.36 Sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-charge. |
| 69 | M&L for Light shade double charged vitrified tile 8-10 mm thick (Square / rectangular) polished , area of each tiles exc 0.42 Sqm but not exc 1.00 Sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-charge. |
| 70 | S&F Non skid ceramic coloured floor tiles 7-8mm thick, area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm or of size as approved as in floors set and jointed in neat cement slurry and pointed in white cement with pigments to match complete all as specified and directed by Engr-in-charge. |
| 71 | M&L for Machine cut kota stone slab flooring 20-25 mm thick over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete including 20mm thick screed bed in CM 1:3 all as specified and directed by Engr-in-charge. |
| 72 | M&L for machine cut kota stone 20-25 mm thick in riser of steps/skirting, laid over 10 mm thick rendering in cement mortar 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing all as specified and directed by Engr-in-charge. |
| 73 | M&L for rendering 10mm thick as backing coat in CM 1:4 complete all as specified and directed by Engr-in-charge. |
| 74 | S&F for light shade double charged vitrified tile 10 mm thick (Square / rectangular) polished, as in vertical surface/skirting set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-charge. |
| 75 | S&F for glazed ceramic coloured tiles 300mm x 600mm x 7mm thick as in vertical surfaces of walls, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-charge. |
| 76 | Rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished fair and even without using extra cement complete all as specified and directed by Engr-in-charge. |
| 77 | Rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished fair and even without using extra cement complete all as specified and directed by Engr-in-charge. |
| 78 | Preparing newly plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed by Engr-in-charge. |
| 79 | Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed by Engr-in-charge. |
| 80 | Preparation of old wall surfaces with washing, rubbing down and stopping of distempered wall surfaces and applying one coat of OBD, white/ coloured complete all as specified and directed by Engr-in-charge. |
| 81 | Applying one coat of cement base paint on old external wall surface up to G+2 floor height, including preparation of surfaces complete all as specified and directed by Engr-in-charge. |
| 82 | Applying two coats of weather proof exterior emulsion paint (Asian Ultima APEX or Berger Weather Allguard or equivalent) up to G+2 floor height including preparation of surfaces etc complete all as specified and directed by Engr-in-charge. |
| 83 | Preparation of old decorated wall/ceiling surfaces and applying one coat of wall care putty (Make: Birla or equivalent) up to G+2 floor height complete all as specified and directed by Engr-in-charge. |
| 84 | Material and labour for preparation of old decorated surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent walls and trading oil and greasy spots and applying for one coat of white wash all as specified and directed by Engr-in-charge. |
| 85 | M&L one coat of white wash on ceiling on old plaster surfaces incl prep of surfaces all as specified and directed by Engr-in-charge. |
| 86 | M & L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not other wise described and applying one coat of synthetic enamel paint over red oxide primer complete all as specified and directed by Engr-in-charge. |
| 87 | Preparation of old painted surfaces of wood or wood based materials of any description over 10cm width or girth and applying one coat of synthetic enamel paint on wooden surfaces in multi-storeyed bldgs., complete all as specified and directed by Engr-in-charge. |
| 88 | Preparation of new wooden surfaces and applying two coat of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description, not otherwise described over 10cm width or girth, complete all as specified and directed by Engr-in-charge. |
| 89 | S&F 5 mm thick looking mirror of required size, fixed on walls with dash fasteners and chromium plated screws purposefully made to fix the glass by drilling hole in the glass complete all as specified and directed by Engr-in-charge. |
| 90 | S&F rotational moulded polyethene water storage tank 500 ltr capacity hoisted and fixed in position and tank nipple complete all as specified and directed by Engr-in-charge. |
| 91 | S&F rotational moulded polyethene water storage tank 1000 ltr capacity hoisted and fixed in position and tank nipple, complete all as specified and directed by Engr-in-charge. |
| 92 | S&F 15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs complete all as specified and directed by Engr-in-charge. |
| 93 | S&F 20mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs complete all as specified and directed by Engr-in-charge. |
| 94 | S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engr-in-charge. |
| 95 | S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed by Engr-in-charge. |
| 96 | M &L for 50 users conventional Septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Brick work in CM 1:4 in Walls, RCC 25 in Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter for complete all as specified and directed by Engr-in-charge. |
| 97 | M&L for 3 M dia X 4.5M effective depth Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size complete all as specified and directed by Engr-in-charge. |
| 98 | S & F in repair Vitreous china squatting pan 'Orissa' pattern size 580x440 mm white with integral foot rest including connection to trap and flushing pipe complete complete all as specified and directed by Engr-in-charge. |
| 99 | S&F in repairs 10 ltrs capacity PVC low level flushing cistern white inlet float valve, handle complete including brackets complete all as specified and directed by Engr-in-charge. |
| 100 | S&F in repair 15mm bore dia of pipe in Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge. |
| 101 | S&F in repair Angle valve/stop Valve of brass fancy type, chromium plated with long shank cast copper alloy screwed down high pressure with capstan head for iron pipe 15mm bore, fixed in repairs, complete all as specified and directed by Engr-in-charge. |
| 102 | Supply and fixing \\"as in repair\\" ball valves of size 20mm bore dia high pressure of PTMT (Make-Prayag) with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixed including necessary fitting as reqd at site all as specified and directed by Engr-in-charge. |
| 103 | Supply and fixing \\"as in repair\\" ball valves of size 15mm bore dia high pressure of PTMT (Make-Prayag) with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixed including necessary fitting as reqd at site all as specified and directed by Engr-in-charge. |
| 104 | S&F in repair Gun metal globe of gate valve with iron wheel head, screwed both ends of size 20mm fixing in repair, complete all as specified and directed by Engr-in-charge. |
| 105 | S&F in repair waste pipe of unplasticized PVC pipes of pressure rating 10 kgf/sq. cm, suitable for sink & WHB, in repair complete all as specified and directed by Engr-in-charge. |
| 106 | S&F in repair CP 20mm dia, Stainless steel, tubular curtain rail, fixed with fancy brackets and end bulbs complete all as specified and directed by Engr-in-charge. |
| 107 | S&F in repair water closet single piece pattern coloured of size 535 x 380 x 400 mm in repair as approved and complete all as specified and directed by Engr-in-charge. |
| 108 | S&F in repair WHB coloured 550 mm x 480 mm with Pedestal in repair as approved and complete all as specified and directed by Engr-in-charge. |
| 109 | Supply and fixing in repair sinks made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall complete all as specified and directed by Engr-in-charge. |
| 110 | S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in-charge. Make: Prayag & equivalent in Nirali, Jayana. |
| 111 | Supply and fix in repair Stainless steel Plate rack of size 780mm x 910 x 250mm (31\\"x36\\"x10\\") with separators and 3 tier shelves, provisioning of hook 9 Nos made out of stainless steel sheet of grade AI SI-304 and fixed in repairs complete all as per Cat No P-348 of Prayag or equivalent all as specified and directed by Engr-in-charge. |
| 112 | S&F in repairs Corner glass self with brackets all as specified and directed by Engr-in-charge. Make JAQUAR/CERA or equivalent |
| 113 | S &F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plate bracket guard and railing 60 cm long all as specified and directed by Engr-in-charge. |
| 114 | 15 mm bore centre hole basin mixer with round spout with 450 mm long copper pipes and brass nuts with out Pop up in repair complete all as specified and directed by Engr-in-charge. |
| 115 | S&F in repairs 15mm bore Single Lever Basin Mixer without Popup waste with 450mm Long Braided Hoses Registered design no.27601015 in repair complete all as specified and directed by Engr-in-charge. |
| 116 | S&F in repair 15 mm bore wall mixer fixed/Sink mixer in repair complete all as specified and directed by Engr-in-charge. Make: Jaquar and equivalent in CERA. |
| 117 | S&F 15 mm bore Wall Mixer with Telephone Shower Arrangement, Connecting Legs & Wall Flanges but without Crutch & Telephone Shower complete all as specified and directed by Engr-in-charge. |
| 118 | S&F 15 mm bore Hand Shower 105mm Round Shape Single Flow with Air Effect (ABS Body & Face Plate Chrome Plated) with Rubit Cleaning System complete all as specified and directed by Engr-in-charge. |
| 119 | S&F 15 mm bore Flexible Tube 12mm dia. & 1.5M Long with Nuts complete all as specified and directed by Engr-in-charge. |
| 120 | S&F in repair 15 mm bore Overhead Shower 200X200mm Square Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System complete all as specified and directed by Engr-in-charge. |
| 121 | S&F in repair 15 mm bore long body Bib tap in repair complete all as specified and directed by Engr-in-charge. Make : Jaquar Cat Part No CON-037KN and equivalent in CERA. |
| 122 | S&F in repair 2-Way Angular Stop Cock with Wall Flange complete all as specified and directed by Engr-in-charge. Make: Jaquar, HR Johnson & Parryware |
| 123 | S&F in repair Health faucet ABS body with wall hook and 1 mtr chrome plated PVC hose pipe in repair complete all as specified and directed by Engr-in-charge. |
| 124 | S&F in repair Chromium plated toilet paper holder in repair complete all as specified and directed by Engr-in-charge. |
| 125 | S&F in repair Towel Rack with Lower Hanger (Stainless Steel) with hook complete all as specified and directed by Engr-in-charge. Make: Jaquar, HR Johnson & Parryware |
| 126 | S&F in repair Towel Ring Square with round Flange complete all as specified and directed by Engr-in-charge. Make: Jaquar, HR Johnson & Parryware |
| 127 | S&F in repair 600 mm long brass chromium plated towel rail fancy type in repair complete all as specified and directed by Engr-in-charge. Make : Jaquar Cat Part No ACN-1111NM and equivalent in CERA. |
| 128 | S&F in repair Soap dish in repair complete all as specified and directed by Engr-in-charge. |
| 129 | M&L of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replunging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors all as specified and directed by Engr-in-charge. |
| 130 | M&L Treatment of soil under existing floors using emulsion @one litre for hole 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 to match the existing floor complete all as specified and directed by Engr-in-charge. Total in Figures 0.0 0.0 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender