Tender For Addition Alteration To Livin In Offers Accommodation At Af Stn Halwara
Tender Value
43.68 Lakhs
Estimated cost
Bid Submission
07 Nov 2026
2 days left
EMD
87360
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ludhiana → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition Alteration To Livin In Offers Accommodation At Af Stn Halwara
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster of any description thickness including raking out joints hacking for key scrubbing down with water, complete all as specified and directed. |
| 2 | Demolition of brick work as in walls/parapet wall,s removing grass fungus weed, roots of trees completely, grown on roof/wall surfaces, complete all as specified and directed. |
| 3 | M&L for Brick work with sub class ‘B’ brick, straight or curved as plan exc 6m mean radiusbuilt in cement mortar 1:6, complete all as specified and directed. |
| 4 | All as per above item No 3 above but with except bricks (old brick obtained from demolition), complete all as specified and directed. |
| 5 | M&L for 12 mm thick cement mortar 1:6 on Brick or concrete surface finished even and smooth without using extra cement, complete all as specified and directed. |
| 6 | M&L for preparation of new surface of wall and applying two coats of distemper oil emulsion over a coat of primer above 1mm thick wall care putty on new surfaces, complete all as specified and directed. |
| 7 | All as per item No 5 above but 15 mm thick in cement mortar 1:4 using water proofing compound as per manufacturers instructions, complete all as specified and directed.Note : Water proofing compound will be measure and paid separately under respective item as 'Supply only'. |
| 8 | M&L for preparing new plastered or unplastered surfaces & applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed. |
| 9 | M&L plastering 5 mm thick in cement mortar (1:3) furnished even & smooth without using extra cement as on ceiling, complete all as specified and directed. |
| 10 | M&L prepration of new surfaces and applying three coat of white wash on ceiling, complete all as specified and directed. |
| 11 | M&L prepration of old surfaces of applying one coat of white wash on ceiling, complete all as specified and directed. |
| 12 | M&L for complete removal of existing treatment from wall & applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed. |
| 13 | M&L for complete removal of old decorated plastered & unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts, trading oil and greasy potsapplying two coat of distemper oil emulsion over a coat primer above 1mm thick putty on old surfaces of wall, complete all as specified and directed. |
| 14 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 15 | M&L Glazed ceramic coloured tiles (300x450mm) x 6-7mm/(300x200)x6-7mm thick on vertical surfaces as in skirting/dado, set and jointed with neat cement slurry and pointed in white/coloured cement to match the shade of tiles over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed |
| 16 | M&L non skid cerermic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 Sqm but not exceeding 0.18 Sqm in neat cement slurry and pointed in white or coloured cement with pigment over and including 15mm thick screed bed or bedding layer of cement mortar 1:6 as in floor for laying floor tiles, complete all as specified and directed. |
| 17 | M&L vitrified ceramic coloured tiles 10 mm thick (Square/rectangular) area of each tile not exc 0.36 Sqm, in neat cement slurry and pointed in white or coloured cement with pigment over and including 15mm thick screed bed or bedding layer of cement mortar 1:6 as in floor for laying floor tiles, complete all as specified and directed. |
| 18 | All as per item No 17 above but as in skirting, dados/Vertical surfaces over and including rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 rough finished surfaces to receive tiles, complete all as specified and directed. |
| 19 | M&L for 25mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floors, complete all as specified and directed. |
| 20 | Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area exc 1.5 Sqm but n-exc 4 sqm each and refixing in same opening, complete all as specified and directed. |
| 21 | Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area not exc 1.5 Sqm each, complete all as specified and directed. |
| 22 | S & F Pressed steel frames of size 125x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc, complete all as specified and directed. |
| 23 | S&F pressed steel frame for door with one or more rebates size 105x60mm including necessary fixing lugs, hinges, lock strike plate, hold fast etc, complete all as specified and directed. |
| 24 | M&L PCC 1:3:6 type C-1 as in hold fast, pressed steel frames and back filling of pressed steel frame, complete all as specified and directed. |
| 25 | S&F 35 mm thick IInd class hard wood plain framed factory made paneled shutters with panel of commercial ply 12mm thick veneering on both veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS :1003 (part-I) kiln seasoned and chemically treated, complete all as specified and directed. |
| 26 | S&F 35 mm thick IInd class hard wood glazed or skelton shutter factory made open rebated prepared to receive glass, gauge etc.without sash bars edges of framing plain fitted with cut & mitred beads for securing glass etc size of member all as per clause 8.23 (a) of SSR part-I, complete all as specified and directed. |
| 27 | S&F Solid PVC door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube , suppling but single side prelam PVC Sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheetand fixing in opening as per specification, complete all as specified and directed. |
| 28 | S&F 30 mm factory made solid panel PVC door shutter consisting of frame made out of MS tube for top and bottom rail,MS frame shall be covered with heat moulded but wood grain printed PVC sheet used and fixing in the frame and site as specification, complete all as specified and directed. |
| 29 | S&F stainless steel wire cloth 0.36 mm nominal dia and average width of aperture 1.18 mm and fixed with tined tacks or or clips galvanised wire staples and fixed with new beading around mesh, complete all as specified and directed. |
| 30 | S&F 100 mm size butt hinges medium weight cold rolled mild steel, complete all as specified and directed. |
| 31 | S&F Floor doors stoppers of aluminium alloy body and tenque anodisede with hard drawn steel spring fixed in floor 150mm long, complete all as specified and directed. |
| 32 | S&F aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long, complete all as specified and directed. |
| 33 | S&F aluminium handles cast type anodised 150mm long, complete all as specified and directed |
| 34 | S&F 300 mm long aluminum anodised sliding door bolts, aluminium alloy, door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium, complete all as specified and directed. |
| 35 | S&F mild steel 300mm helical door spring, ordinary rat tail rod pattern including roller and roller plate fixed to wooden frame or welded to steel frames, complete all as specified and directed. |
| 36 | M&L preparation of new wood surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 37 | M&L for prepraration of old or previously untreated surfaces of steel over 10cm width or girth and applying one coats of synthitic enamel paint, complete all as specified and directed. |
| 38 | Dismantling of AC/fibre glass translucent corrugated or semi corrugated sheet including ridges, hips, valley etc of any description and thickness in roof coverings, complete all as specified and directed. |
| 39 | Dismantling wrought iron work or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 40 | S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, cutting holes etc. conforming to Fe-290 (Gde E-165), complete all as specified and directed. |
| 41 | S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, including cutting chases, fixing with self taping screws, complete all as specified and directed. |
| 42 | S & F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed |
| 43 | S&F Powder Coated aluminium frame for doors, windows, (minimum thickness of powder coating 50 micron) ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 44 | S & F Powder coated aluminium window and ventilator shutters,side hung/fixed type without sash bars, aluminium section including necessary joining cleats, zing clips, ruber neoprene packing, anodised aluminium snap beading screws anodised aluminium fittings such as peg stay, Tower bolt 150mm long 1 No. hinge type B-21 100 mm long 2 Nos, suitable handle 1 No complete all as specified and as directed (minimum thickness of powder coating 50 micron), complete all as specified and directed. |
| 45 | Supply and fixing anodised aluminium grill (anodised tranparentor dyed to required shade according IS : 1868/ pattern, with approved standard section and fixed to the existing window frame with CP brass stainless steel screws @200 mm centre to centre including cutting the grill to proper opening size for fixing and operaton of handles and fixing approved anodised aluminium standard section around the opening as required, complete all as specified and directed. |
| 46 | M&L Figured glass 4mm thick, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane, complete all as specified and directed. |
| 47 | S&F 4.8 mm thick sheet glass selected quality plain/ tinted in squares exc 0.5 sqm each pane, complete all as specified and directed. |
| 48 | S&F Factory made single extruded WPC (wood Polymer Composite) solid door/ window/ Ceosetory windows & other frames/ Chowkhat of size 45x70 mm comprising of virgin PVC polymer of K value 58-90 (Suspension Grade), Calcium carbonate and natural fibers (wood powder /rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full boky threaded star headed SS screws having minium frames density of 750 Kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edgn minimum compressive strength of 58 N/mm, mokules of elasticity 900 N/mm and resistance to spread of flame of class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required MS hold fast / lugs/ SS dash fasteners of required dia and length as required (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately), complete all as specified and directed.Note: For WPC solid door/ window frames, minus 5mm tolerance in dimension i,e, depth and width of profile shall be acceptable. Variation in profile dimesnsions on plus side shall be acceptable but no extra pauyment on this account shall be made for cup board. |
| 49 | Supply only Integral waterproofing compound, complete all as specified and directed. |
| 50 | S & F 40 mm flap width continuous (piano) hinges, mild steel, bright finish or electro galvanised, complete all as specified and directed. |
| 51 | S&F 30 mm thick flush shutter solid core construction with block board core and ply wood face panels commercial type decorative faces with cremica on both ends, complete all as specified and directed. |
| 52 | S & F hasp and staple saftey type aluminium anodised with mild steel hinges pin including bolt to hing plate and fixed with screw size 125mm, complete all as specified and directed. |
| 53 | S & F 18/19mm block boards of water proof, grade 2 quality, interior grade, decorative type with decorative face cermica veneer on one face for external teak wood leaping, 6mm thick fixed with screws to timber frame work, complete all as specified and directed. |
| 54 | S& F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed, complete all as specified and directed. |
| 55 | S&F in repair 1000 ltr rotational moulded polyethylene water storage tank minimum 3 layer, white in colour, hoisted, complete all as specified and directed. |
| 56 | S&F 20 mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed. |
| 57 | S&F in repair wash down water closet (Pedestal pattern) P OR S trap or in a single piece including flushing cistern seat cover and stainless steel water jet including connection to drain pipe (outgoing pipe) and to flush pipe, antisyphonage pipe etc, complete all as specified and directed. |
| 58 | S & F in repair vitreous china wash hand basin white flat back size 550mmx400mm excluding , waste chaina and plug and porcelain stopper but including brackets, cutting for and pinning in ends of brackets or erecting stand ,with waste coupling and waste pipe, (including cornor type if required), complete all as specified and directed. |
| 59 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) (for one to four storey building), complete all as specified and directed. |
| 60 | S&F for 110 mm PVC (SWR) Rain water pipes single socketed in any length with rubber ring joints fixed to walls, including cutting holes, complete all as specified and directed. |
| 61 | S&F for 75 mm PVC (SWR) rain water pipes single socketed in any length with rubber ring joints including cutting holes fixed to walls, complete all as specified and directed. |
| 62 | S & F PVC (SWR) bends 110 mm dia, complete all as specified and directed. |
| 63 | S&F PVC(SWR) bends 75 mm dia, complete all as specified and directed. |
| 64 | S&F PVC (SWR) vent cowl 75 mm dia, complete all as specified and directed. |
| 65 | M&L in repair 100mm dia PVC floor trap with CP grating including jointing to waste pipe with cement solvent, complete all as specified and directed. |
| 66 | S&F in repair stainless steel sink with draining board,made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, coupling cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm, complete all as specified and directed. |
| 67 | S&F 600 mm x 450 mm beveled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screwes and cup washers, complete all as specified and directed. |
| 68 | S&F in repair health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipes with 1.25mtr long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed. |
| 69 | S&F in repair stainless steel kitchen plate rack of size 90cm x 90 cm x 25cm, 1.0 mm thick SS sheet including all fixing screws of Stainless steel, complete all as specified and directed. |
| 70 | S&F in repair PVC connection 450 mm long, 15mm size with PTMT nuts, complete all as specified and directed. |
| 71 | S&F in repair 10 ltr PVC valve less symphonic action type flushing cistern, low level white with inlet ball valve float and handle with flush pipe, complete all as specified and directed. |
| 72 | S&F in repair swivel shower with shower arm CP fancy type 15mm size of any colour, complete all as specified and directed. |
| 73 | Taking up or down 15mm dia steel tubing and connections including cleaning for re-fixing or removal to store, complete all as specified and directed. |
| 74 | Taking up or down 20 mm dia steel tubing and connections including cleaning for re-fixing or removal to store, complete all as specified and directed. |
| 75 | S&F of CPVC pipes outer dia 20mm SDC 11 & plain CPVC SDR 11 fittings in trenches complete etc fixed to walls,floors, & ceilings including cutting and chases, complete all as specified and directed. |
| 76 | S & F in repairs fancy type bib tap cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle for iron pipe or brass ferrule and fixing of 15mm bore pipe, complete all as specified and directed. |
| 77 | S&F as in repair 15mm bore stop valve or angle valve, cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed. |
| 78 | M&L providing and injecting chemical emulsion for Post Constructional anti-termite at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ .5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same, complete all as specified and directed. |
| 79 | M&L Providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment of soil under existing floors using emulsion @ one litre per litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors, complete all as specified and directed. |
| 80 | Supply & fixing in repair wash basin mixer cast copper alloy with capstan head, chromium plated, screwed down, high pressure with or without lettered 'Hot' or 'Cold' with long shank and fly nuts screwed for iron pipe or for brass ferrule 15mm bore, complete all as specified & directed. |
| 81 | Supply & fixing in repair wall mixer cast copper alloy with capstan head, chromium plated, screwed down, high pressure with or without lettered 'Hot' or 'Cold' with long shank and fly nuts screwed for iron pipe or for brass ferrule 15mm bore, complete all as specified & directed. |
| 82 | S&F in repair toilet paper holder, vitreous bix type white or colored, complete all as specified and directed. |
| 83 | Demolition of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons etc, complete all as specified and directed. |
| 84 | M&L granite slab (of any type) 20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in 15mm thick screed bed of cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite, complete all as specified and directed |
| 85 | Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situation, complete all as specified and directed. |
| 86 | S&F in repair brass chromium plated tubular towel rail 20mm dia(D) type 60cm long between flanges, complete all as specified and directed. |
| 87 | M&L for priming surfaces and applying normal treatment (for moderate conditions) using hot bitumen primer @ 0.30 kg/Sqm, complete all as specified and directed. |
| 88 | M&L for applying evenly a tack coat of industrial bitrumen 85/25 @ 1.2 Kg per Sqm including cleaning surfaces, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 89 | M&L for applying evenly a tack coat of industrial bitrumen 85/25 @ 1.2 Kg per Sqm including cleaning surfaces, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender