Tender For Special Repair To Roof Treatment And Toilet Of Bldg No Np-07 Of 14 We Bn Under Ge (West) Pathankot
Tender Value
46.60 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
3 days left
EMD
93200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Roof Treatment And Toilet Of Bldg No Np-07 Of 14 We Bn Under Ge (West) Pathankot
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 22-Oct-2026 | Corrigendum01 | Other | 05-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Sch 'A' Part-I B/R PortionM&L liquid water proofing treatment to RCC roof slab including dismantling of existing roof treatment of any description such as worn-out tar felt, debris, mortar of any description & any thickness, surface cleaning of all foreign material such as shrubs/roots, fungus, moss, dust including plaster, APP membrane etc. including disposal of debris out of MoD land : (a) Prepare the surface by cleaning the surface and making free of dirt, foreign particles, laitance followed by grinding all protrusions to make surface modulated, thereafter, inspection for cracks on the surface caused by thermal expansion, contraction. Cutting the grooves with suitable cutter machine in \\"V\\" groove filled with Repair mortar/micro concrete/General purpose grout as recommended proportionally as per recommendation of manufacturer. Making of Gollas at all the corners with Polymer modified mortar (1:4 Cement: sand with acrylic polymer 3.5% by weight of cement) complete all as specified.(b) Laying 10mm thick rendering in Cement mortar 1:3 with liquid water proofing compound (as per manufacturer’s instructions) on fair faces of concrete roof surfaces, finished even and fair to receive treatment on roof Complete (c) Supplying and applying High performance Hybrid Polyurea waterproofing coating spray/hand applied liquid membrane with following specifications: (i) Elongation of range 400% to 600%, (ii) Tensile strength of 8-12 N/mm2, (iii) Crack bridging ability of 3.00-4.00mm, (iv) Hardness (Shore 'A' ASTM D2240) of range 50-70. The application shall include epoxy primer application in ratio 1:1 (resin: hardener) with 100% water dilution and laying of fiber mesh 1.5 mm thick wave in leno pattern laying weight 4.5gm/Sqm and painting it properly with overlap of 50 mm, and allowing it to dry before application of Hybrid polyurea in two coats in 6 hrs interval to achieve total min thickness 1 to 1.50mm. The application/ treatment shall be carried out by authorized rep of approved specialist firm/manufacturer. |
| 2 | Note:- (i) The defect liability period of water proofing treatment to RCC roof slab including sunken floor shall be 10 years and the contractor shall be responsible to keep the entire building(s) free From leakage/seepage for a period of 10 years after certified date of completion. The contractor may obtain a similar guarantee from the specialist firm engaged by him for the purpose (ii) Work to be carried out by authorized applicator and as per manufacturer’s instructions.(iii) Providing test with filling of water for continuous 48 hours if there is any leakage than entire treatment will be done again by contractor without any cost.(iv) The rate includes for filling cracks in existing roof with epoxy cement mortar using suitable bonding agent before laying cement plaster.(v) Material shall be purchased directly from the Company’s Authorised Dealer only. No material procured from any other source or prior to the issue of the Work Order shall be permitted for use.All the purchase vouchers for the quantities incorporated in the contract should be verified and defaced by Engineer-in-Charge and same should be kept in record. The purchase vouchers of all the materials for entire quantity should be recorded in Measurement book as ‘not to be abstracted’.(vi) The contractor will be procured 50% of quantities immediately after placing of WO. The remaining 50% quantities will be procured in one week advance before consumption/competition of earlier quantities (first 50% material). All the material shall be kept in custody of the contractor and in double lock & Key system. The one key shall be with the Engineer-in-Charge and other shall be with the contractor’s representative.(vii) Stored material will be issued by the contractor to applicator in consultancy with Engineer-in-Charge on daily basis.(viii) The contractor shall submit a valid Memorandum of Understanding (MoU) executed with any one of the approved brands(ix) Warranty: One year for defects due to workmanship.” |
| 3 | Taking up or down, 15mm dia bore, GI tubing, medium grade, including removal from site, complete all as specified and as directed by Engineer-in-Charge. |
| 4 | Taking up or down, 20mm dia bore, GI tubing, medium grade, including removal from site, complete all as specified and as directed by Engineer-in-Charge. |
| 5 | S&F 15mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls or laid in floors complete all as directed by Engr-in-Charge |
| 6 | S&F in 20mm tubes medium grade galvanised with all fittings and fixed complete to walls or laid in floors bore of pipe complete all as specified and directed |
| 7 | Cutting chases ,pinning in making good to facing where required of brick walls and pointed in cement mortar 1:3 for concealed water tubing etc cutting not exc 10 cm girth. |
| 8 | Disconnecting existing 500 ltr capacity of rotational moulded PVC water storage tank, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) , alongwith tank nipple , inlet outlet pipe and all connected fittings. |
| 9 | S&F rotational moulded PVC water storage tank three layers of 1000 ltrs capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including inlet & outlet tank nipple 20 mm thick ball valve high pressure of PTMT with epoxy coated aluminium rod and high dinsity plastic bal screwed for iron pipe and fixed ( Minimum weight 20mm-210 gms including dismantling of old broken water tanks and refixing of inlet , outlet & over flow pipe etc complete all as specified and directed. |
| 10 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting and reconnecting and re-fixing in position (Cleaning repairing etc. measured separately) exc 500 and n.exc 1000ltr incl all fittings |
| 11 | Taking up or down PVC pipe incl all connections such as PVC bend, tee, etc , of 110/75 mm dia complete all as apecified |
| 12 | S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls and laid in trenches and under floor etc incl taking down old pipes complete all as specified |
| 13 | S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls and laid in treanches and under floors etc incl taking down old pipes complete all as specified |
| 14 | S&F 110mm PVC (SWR) bends any radius complete all as specified |
| 15 | S&F 75 mm PVC (SWR) bends any radius complete all as specified |
| 16 | Dismantling of floor, hearth or wall tilling incl cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and as directed by Engineer -in-Charge. |
| 17 | M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including 15 mm thick screed bed or bedding layer of mortar in cement mortar 1:6 for lying floor finishes complete all as specified and as directed by Engineer -in-Charge. |
| 18 | M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including 15 mm thick screed bed or bedding layer of mortar in cement mortar 1:6 for lying floor finishes complete all as specified and as directed by Engineer -in-Charge. |
| 19 | M&L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles including plastering 10mm thick in cement mortar 1:4 finished rough to receive wall tiles etc complete all as specified as directed by Engineer -in-Charge. |
| 20 | M&L for light shade vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colouredcement to match including 15 mm thick screed bed or bedding layer of mortar in cement mortar 1:6 for lying floor finishes incl skirting complete all as specified and as directed by Engineer -in-Charge. |
| 21 | Demolition of brick work or stone masonry built in cement mortar including pillar etc. complete all as apecified |
| 22 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6mmean radius built in cement mortar 1:6 |
| 23 | Taking down cement plaster or cement lime plaster of any description including racking out joints and hacking for key and scrubbing down with water etc. |
| 24 | M&L for rendering 15mm thick in concrete surfaces of walls set in CM 1:6 finished even smooth without using extra cement complete all as specified |
| 25 | M&L for cement plaster 1:3, 5 mm thick incl finishing even and smooth without using extra cement on ceiling. |
| 26 | M&L for rendering 10mm thick cement plaster 1:4, incl finishing even and smooth without using with out extra cement on internal faces. |
| 27 | M&L for preparation of two coat of OBD over a coat of chalk whiting over one coat of 1.5 mm thick wall care putty on plastered surfaces of primer on newely plastered surfaces of walls complete all as directed |
| 28 | M&L for new exterior painting work and making good/smooth the surface with wall putty with silicon additives and sanding thes surface for removal of loose particles and applying one coat of SmartCare waterproof primer (Damp Prime Suprema) on walls and chajjas with 10% of dilution of water and applying two coats of 100% acrylic smooth emulsion exterior grade with silicon additives and anti-algal properties (Apex Ultima Suprema). complete all as sepcified and directed.Note: All treatment shall be doneby authorised OEM with the help of mechanical means. |
| 29 | M&L for three coats of white wash to ceiling surfaces including preparation of new surfaces complete all as specified |
| 30 | Supplying only Integral waterproofing compound |
| 31 | M&L for exterior painting work including complete removal of existing treatment and rubbish material till top surface of existing plaster and crack filling with crack seal upto 3mm where required and making good/smooth the surface with wall putty with silicon additives and sanding thes surface for removal of loose particles and applying one coat of SmartCare waterproof primer (Damp Prime Suprema) on walls and chajjas with 10% of dilution of water and applying two coats of 100% acrylic smooth emulsion exterior grade with silicon additives and anti-algal properties (Apex Ultima Suprema). complete all as sepcified and directed.Note: All treatment shall be doneby authorised OEM with the help of mechanical means. |
| 32 | M&L for preparation of old surfaces by complete removal of existing treatment of painted walls incl pillar etc. by mechanical equipments like electric wall sander/water jet machine and applying cement based putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two coat of distemper with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of alkali resistant primer complete, by mechanical means as per manufacturer's specification all as specified and as directed by GE. |
| 33 | M&L for preparation to old decorated, plastered or unplastered surfaces of ceiling, by brooming down, scraping down smoke spots, moulds, mossand efflorescent salts etc. and applying one coat of white (lime) wash including cornices pilasters etc complete all as specified and as directed. |
| 34 | S&F in repairs of single Piece-WC with UF soft close seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings Size: 360x725 x735 mm, S Trap-300 mm white with combined flush tank (Cascade type) incl seat covers complete all as specified and directed by Engr-in-Charge. |
| 35 | S&F in repair vitreous china EWC white including flush pipe, seat cover etc, including connection to drain (or out going pipe) and to flushing pipe anti syphonage pipes etc complete all as specified and as directed by Engineer-in-Charge. |
| 36 | S&F in repair vitreous china squatting pan of pattern , long pan, \\"Orissa Pattern\\", size 580x440 mm white with integral foot rests ( excluding flushing cistern and flush pipe ) but including provision of concrete bedding CI floor trap etc complete |
| 37 | S&F in repairs vitreous china wash basin , flat back white of size 550x 400 mm , including cutting for and pinning in ends of brackets or erecting stand including 32 mm bore CP waste pipe long screw thread and 32 mm dia flexible waste pipe including fixing of pillar taps all as specified and directed. |
| 38 | S&F Vitreous China half stall urinal flat back, white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe), complete all as specified and as directed by Engineer-in-Charge. |
| 39 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, etc complete all as specificed and as per directed by Engineer-in-Charge. |
| 40 | S&F in repairs,10 litre capacity, low level PVC flushing cistern, syphonic action type white colour with in let ball valve float and handle, PVC flush pipe, brackets etc complete all as specified and as directed by Engr-in-charge |
| 41 | S&F in repairs Bib tap, cast copper alloy, 15mm dia long body with crutch or butterfly handle screwed down for iron pipes complete all as specified and as directed by Engineer-in-Charge. |
| 42 | S&F in repairs 15mm bore Fancy type pillar taps, long shank (swan neck), Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed. |
| 43 | S&F in repairs Fancy type chromium plated 15mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. |
| 44 | All as per Srl item No-42 here-in-before but fancy type, chromium plated with long shank and cup (concealed type) complete all as specified |
| 45 | S&F in repairs 600x450mm bevelled edge mirror of selected quality glass, mounted on 06mm thick commercial ply wood backing including aluminium frame and fixed in wall with wooden plug with chromium plated brass screws and cup washers with glass self assembly complete all as specified and as directed by Engineer-in-Charge. |
| 46 | S&F in repairs soap dish, vitreous china white, approximate size 160 x 160 x 90mm, fixed to plugs with chromium plated brass screws all as specified and as directed. |
| 47 | S&F CP brass tubular towel rail 600mm long 20mm dia 'D' type in repairs complete all as specified |
| 48 | S&F in repairs for low density polythelyne pipes (LDPE) of pressure rating 6kgf/cm2 fixed complete to wall or in floors etc. as in outlet pipe for WHB etc. 32mm bore complete all as specified |
| 49 | S&F 15 mm dia 600 mm long PVC water connection with PTMT nuts and washers all as specified |
| 50 | S&F in repairs CP shower rose 125 mm size with swivel joint fixed in repairs complete all as specified |
| 51 | S&F PVC (SWR) floor trap, plain with grating including jointing with solvent to waste pipe fixed in cement concrete type B-1 (1:2:4), 75 mm dia outlet complete all as specified |
| 52 | S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified |
| 53 | S&F in repairs Shelf of PTMT fixed with and including Chromium plated brass screws and wooden / plastic cleats (Minimum weight 300 gms) complete all as specified |
| 54 | S&F CP curtain rail / drapery rod 20 mm dia of approved pattern along with decorative SS brackets of approved quality with knob and pattern fixed with screws all as specified and as directed. |
| 55 | Taking down chowkhats or frames not exc 1.5 sqm each(without taking off shutters from the frames), etc complete all as specificed and as per directed by Engineer-in-Charge. |
| 56 | Taking down, Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each but with shutters (without taking off shutters from the frame), etc complete all as specificed and as per directed by Engineer-in-Charge. |
| 57 | Taking down, Shutters of any description exc 1sqm but n.exc 2 sqm each, etc complete all as specificed and as per directed by Engineer-in-Charge. |
| 58 | S&F pressed steel door frame 165 x 60mm with one or more rebats including fixing lugs, hinges, lock strike plate etc complete all as specified and directed |
| 59 | S&F pressed steel door frame 105 x 60mm with one or more rebats including fixing lugs, hinges, lock strike plate, complete all as specified and directed by Engineer-in-Charge. |
| 60 | M&L PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in coping, filling in door frame etc. complete all as specifed and directed. |
| 61 | M&L for Solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube suppling and fixing in opening as per specification and drawing, etc complete all as specificed and as per directed by Engineer-in-Charge. |
| 62 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing in SSR complete all as specified and directed by Engineer-in-Charge. |
| 63 | S&F factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 64 | M&L for 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercials type on both sides complete all a specified and directed. |
| 65 | S&F 2nd class hardwood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads of securing glass, gauze etc and fitted to chowkats, etc complete all as specificed and as per directed by Engineer-in-Charge. |
| 66 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperature 1.40mm & fixed with stainless steel wire staples , etc complete all as specificed and as per directed by Engineer-in-Charge. |
| 67 | S&F for SS hinges, stain less steel alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, size of hinges in 100mm, etc complete all as specificed and as per directed by Engineer-in-Charge. |
| 68 | S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, etc complete all as specificed and as per directed by Engineer-in-Charge. |
| 69 | S&F 150mm long aluminium anodised, barrel tower bolts of extruded section, etc complete all as specificed and as per directed by Engineer-in-Charge. |
| 70 | S&F aluminium handles 150mm long fabricated type anodised, etc complete all as specificed and as per directed by Engineer-in-Charge. |
| 71 | S&F MS helical door spring 300 mm long with roller and roller plate complete all as specified. |
| 72 | M&L for preparation of new or previously untreated surface of wood or wood based surfaces of any description over 10cm width or girth and applying two coats of synthetic enemal paint over a coat of pink primer, etc complete all as specificed and as per directed by Engineer-in-Charge. |
| 73 | S&F of steel window/ventilator factory made, made out of mild steel box type and shutter suitable for double shutter i.e. glazed and gauged shutter. Glazed shutter made out of hollow section with sash bar and gauged shutter made out of hollow section without sash bar including hinges, tower bolt, handle, grill 10mm sq bar including two coat of synthetic enamel paint over one coat of red oxide primer, atrred hold fasts, PCC bed blocks for fixing hold fast, including plain/ figured glass and stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperture 1.18mm & fixed with stainless steel wire staples etc complete all as per drg No CEPZ/ TD-245/01 Sheet No 1/1 & CEPZ/ TD-246/01 sheet No 1/2 & 2/2 including taking down old windows/ventilators, complete all as specified and directed. |
| 74 | Dismantling timber scantling as in fillets, rails etc under 40 sqcm in section and fixed in any position complete all as specified |
| 75 | M&L 2nd class hard wood plain fillets sectional area exc 13 sqcm but n. exc 25 sqcm square(as in chowkats of CBs) , rectangular in section, wrought and smooth finish, secured with nails or brads complete incl polishing all as specified |
| 76 | M&L for 18 to 20 mm thick PVC prelaminated solid board with one side decoration choice laminated and other side balancing white including 3 mm thick lipping and equal to thickness of board as in kitchen cabinet , cupboard etc fixed with screws to steel /timber frame work including taking out old u/s board etc complete all as specified and directed. |
| 77 | S&F continuous (Piano ) Hinges 30 mm width of flaps, mild steel bright finish or elecrogalvanised complete all as specified |
| 78 | S&F 150 mm long stainless steel (Fancy type) door handles for CBs of selected quality complete all as specified |
| 79 | S&F 100mm aluminium barrel tower bolts, , with bright bolt and fixed complete all as specified. |
| 80 | S&F 100 mm size Hasp and staple, Aluminium anodised, wire type, including bolt to hinge plate and fixed with screws complete all as specified and as directed. |
| 81 | S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished all as specified and as directed. |
| 82 | M&L mild steel Mortice locks 65 mm size 4 lever type for cupboards , grade- 1 vertical type complete all as specified |
| 83 | S&F 50 mm long Magnet ball catcher made out of PVC fixed to shutter and chowkhats with SS screw all as specified and directed by Engr-in-Charge. |
| 84 | M&L for powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainlesssteel screws, complete all as directed by Engr-in-Charge |
| 85 | M&L for powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 86 | S&F aluminium extruded section body door closer Hydraulically regulated designed No 3 universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg complete all as directed. |
| 87 | S&F for powder coated butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, size of hinges in 100 mm, etc complete all as specificed and as per directed by Engineer-in-Charge. |
| 88 | S&F 5.5 mm thick tinted sheet glass ordinary quality and glazing with powder coated aluminium beading in square n.exc 0.5 sqm in each pane including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones, etc complete all as specified and as per directed by Engineer-in-Charge. |
| 89 | S&F prelaminated particle board, exterior grade prelaminated both sides with decorative choice laminations , fixed with screws to timber frame work/aluminium frarme work complete all as specified |
| 90 | Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge |
| 91 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above GL) |
| 92 | Dismantling Stone slabs and tiles laid dry and pointed of any description or thickness in floors, aprons etc all as specified and as directed. |
| 93 | M&L for 75 mm thick Cement concrete type D4, 1:4:8 (40mm graded aggregate)as in sub base |
| 94 | M&L for non abrasive ( endura) tiles 300mm x300mmx10 mm thick ( square/rectangular ) polished , in floors etc set and jointed in nceat cement slurry and pointed in white or coloured cement over & including 15 mm screed bed in CM 1:4 ato match complete all as specifed and directed Note :- the texture, colour , shade of tiles & laying of tiles to any pattern & any design with one or more colour shall be approved by GE complete all as specified and directed |
| 95 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets |
| 96 | S&F false ceiling with fibre cement designer tiles ivory painted (high pressure steam cured) of 4 mm thickness (as per IS:14862) of size 595x595 mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main 'T' runnerwith suitably spaced joints to get required length, and 15x32mm made if 0.30 mm sheet and cross 'T' at 600 mm c/c to form a grid including, required cutting/ making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main 'T' runners to be suspended from ceiling using GI soffit cleats fixed to existing ragter, purlin, etc with galvanised butterfly level slips, spaced at 1200 mm c/c along main T, bottom exposed width of 15 mm of all T-sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 KG/spm, and refixed all existing electric wiring and fixture all complete at all heights as per direction of Engineer-in-Charge. |
| 97 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thick, including removing rubbish off the premises complete all as apecified |
| 98 | M&L for PCC (1:3:6) type C2 using 40 mm graded aggregate as in plinth protection/ Paths of 75mm thick. Finishing cement concrete surface even and smooth without using extra cement complete all as specified |
| 99 | Dismantling plain or corrugated steel sheeting, AC Sheets any guage, thickness including Nainital or similar pattern roof covering/wall cladding complete all as specified and directed.((Note : height of the bldg truss is upto upto 7 Metre) |
| 100 | Dismantling of steel work of any description and in any position not otherwise specifically provided for. |
| 101 | M&L for two coat of synthetic enamel paint over a coat Zinc chrome primer, including Preparing new steel surfaces any description, over 10 cm width or grith,not otherwise described. |
| 102 | S&F steel work in tubular trusses / rectangular or square, Hollow mild steel sections for structural use, including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to I.S.1161-1979 grade St-240, and Painted one shop coat of zinc chromate primer paint (including preparation of surface) at contractor's workshop before fabrication |
| 103 | S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of Fe 410 -W (Gde-E- 250)quality-A all as specified and directed. |
| 104 | S&F pre-painted galvatume aluminum zinc coating GI based corrugated steel sheeting, 0.50 mm thick, of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws or or fixed with 'L' or 'J' type or cranked hooks bolts in liew of screw all as specified by Engr-in-charge. |
| 105 | S&F rolled mild steel in:Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) confirming to Fe-410 -W(Gde-E- 250)quality-A complete all as specified. |
| 106 | S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified. Please Enable Macros to View BoQ information |
| 107 | S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 05, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender