Tender For Construction, Development And Beautification Work Of Footpath On Major Roads In Zone A Area Jda Jaipur
Tender Value
2.70 Crore
Estimated cost
Bid Submission
04 Nov 2026
12 days left
EMD
5.40 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction, Development And Beautification Work Of Footpath On Major Roads In Zone A Area Jda Jaipur
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing reinforced concrete precast kerb stone or dand R.Mtr of M-20 grade cement concrete 120 cm long having 4 Nos. bars of 8 mm dia hysd and stirrups 6 Nos of 6 mm dia as per IS with in built provision of interlocking of jointing and lifting compaction of reinforced concrete by mechanical and table vibrators jointing at site with cement mortar 1:4 complete in all respect as directed by Engineer incharge on: 100 mm thick cement concrete 1:4:8 (1 Cement : 4 Coarse sand : 8 stone aggregate 20 mm thick nominal size) including excavation of earth and cutting of BT road cutting of WBM road etc. and disposal of surplus material with all lead and lift. The size of kerb shall be (11.5+16.5)/2*30+(16.5*7.5) |
| 2 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide |
| 3 | Extra if square,rectangular hollow tubelar sections are used or grill made by flats only |
| 4 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MoRTH specifications Clause 1702, 1703, 2102 & 2104 P.C.C grade M 10 Nominal mix 1:3:6 |
| 5 | Carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete.Earth, Sand, Lime, Morrum manure or sludge 10 KM |
| 6 | Providing & Fixing Black Cadappa Cobble (4\\" X 4\\" x 3\\") Stone flooring work dressed stone (4\\" X 4\\") 3\\" thick in honed finished with pattern as per approved design over 25-50mm thick base in CM 1:6 including pointing with cement sand mortar 1:2 (1 cement :2 sand) match the shade of stone with joint. The cost includes all charges like material, labour, fixing, scaffolding arrangement, wastage and adhesive etc complete in all respect as per direction of Enginner in charge |
| 7 | Supply & fixing of Fiber reinforced Ferro cement drain cover (light duty) designed for side drain for class \\"B\\" Road loading duly marked on cover with adequate steel reinforcement having thickness 50 mm to 75 mm anti corrosive bitumen painted M.S. plate Rim and on M.S. lifting hooks additives & admixture like plasticizer shrinkage resistance compound abrasion resistant as per approved drawing and design complete in all respect.for drain Opeining Size 1201 to 1500 mm Standard Drain Cover Size 1800mm x 600mm x 75mm |
| 8 | Interlocking Concrete Block Pavement with M-30 Grade 0.30 Mtr x 0.30 Mtr x 0.15 Mtr Edge Blocks (measurements shall be made inner to inner side of edge blocks)Providing and Laying of Interlocking M-30 grade Concrete Block Pavements having thickness 60 mm as per drawings and as per IS 15658:2006.and materials conforming to MoRTH Specification Clause 602 with M-30 Grade 0.30 Mtr x 0.30 Mtr x 0.15 Mtr Edge Blocks.Category 'B' : Dentated only two side like I,Z,T shape as per IRC:SP:63-2004 |
| 9 | Providing and laying Tactile tiles (For vision impaired persons is standard of size 300x300x20mm and confirming to IS 1231 of 1980 (Re affirmed in 2006) in all colour fastness etc. laid on 20mm thick base of cement mortar 1:4 in all shapes and patterns including grouting the joint pigment etc. complete as per direction of engineer in charge. |
| 10 | P & F of cement concrete precast kerb or dand of M-20 grade upto 60 cm length over 20 mm thick base of cement mortar 1:6 including earth work, cutting of B/T road, cutting of WBM road etc. & jointing with cement mortar 1:4 grouted 125 mm in ground of shape as approved by Engineer-in-charge. The rates are inclusive of providing, laying and compacting base concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate of 20 mm thick nominal size) 100 mm thick below dand/kerb complete in all respect. The size of kerb be 15 cm x 32.5 cm with round at top. |
| 11 | P/F precast RCC pole (bollard) 2.00 M height as per approved design and drawing by JDA for chain link in M-20 grade including handling carriage complete with synthetic paint of approved brand to give an even shade two or more coats with providing and fixing M.S flats for locking arrangement for M.S chain made of 2 Nos M.S Flats 25×8 mm and 15 cm length with 2 Nos holes in each flats and clamping with nut and bolts of size 50×6 m dia complete in all respect as per the approval of Engineer incharge. |
| 12 | Fabricating, providing and fixing M.S chain consisting of CL square pyramids on both sides having central base of size 25×25mm duly engraved JDA-(year of fabrication) and having a groove on two sides in the middle portion. The overall height on the pyramid should be 100 mm (the total weight should not be less than 270 gms) and housed in M.S ring of 16 mm dia M.S round bars having cut length of 300 mm the weight of chain should not be less than 14.4 Kg per m length including priming with Zinc cromate of approved quality as per the direction of engineer in-charge and as per approved pattern. |
| 13 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish 20 mm thick |
| 14 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR3 x 2.5 Sqmm |
| 15 | Providing & Fixing of IK10 IP66 / IP67 protected Rectangular shape LED Step Luminarie made of powder coated die cast alluminium housing with UV stabalized PC diffuser. The System level Luminous efficacy = 90 Lumen/W. SMD LEDs is to be used, System CRI>70, CCT: 3000/4000/6500 K. The integral electronic driver must be potted & has a unique BIS R number constant current and Internal/external surge protection device of min. 4KV(L-N) and efficiency > 85%, PF>0.9, THD<10% and input Voltage range of 140-270V AC at 50Hz. System life of 50000 Burning hours with 70% of Initial Lumens maintained . driver current <750mA . Fixture must be in compliance with BIS Standards and Trade mak Certificate complete in all respect.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR .Minimum lumen output 450 lm Step light |
| 16 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:Cement Mortar 1:6 ( 1-Cement : 6-Sand). |
| 17 | Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix |
| 18 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. |
| 19 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786)Thermo-mechanically Treated bars (Conforming of relevent IS code) |
| 20 | Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single RowProviding and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 2905. 300 mm dia |
| 21 | Providing & fixing 3M radium tape of approved colour & Design complete in all respect as per instruction by Enginner in Charge |
| 22 | Providing and fixing designer cement concrete polished tiles over 20mm average thick base of CM 1 :4 (1 Cement : 4 sand) jointing with cement mortar 1 :2 ( 1cement : 2 sand) with pigment to match the shade of the tiles having minimum thickness of 25mm complete with all respect. ( as per IS 1237:2012) |
| 23 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and MoRTH Specification Clause 801 800 mm x 600 mm rectangular |
| 24 | Painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and MoRTH Specification Clause 801 |
| 25 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 Mtrs lead as per direction of Engineer-in-charge. |
| 26 | Earth, Sand, Lime, Morrum manure or sludgeFor 10 Km. |
| 27 | Sludge clearance of drains, channels and canals with lift 1.5 Mtr and lead up to 50 Mtr. |
| 28 | Vibro-Compacted Kerb Stone :- Providing and laying factory-manufactured M20 grade vibro-compacted concrete kerb stones of size 300 × 450 × 150 mm, in chamfered/half-batter/ full bullnose profile as approved by the Engineer-in-Charge. Kerb stones shall be manufactured on a fully automatic vibro-compaction machine using minimum 6 mm thick steel production base plates, with automatic batching plant, planetary mixers and mechanized material handling system ensuring minimum human interference and consistent dimensional accuracy. Products shall undergo controlled curing in a dedicated curing chamber for achieving uniform strength and durability. |
| 29 | Vibro-Compacted Kerb Stone :- Providing and laying factory-manufactured M20 grade vibro-compacted concrete kerb stones of size 300 × 300 × 150 mm, in chamfered/half-batter/ full bullnose profile as approved by the Engineer-in-Charge. Kerb stones shall be manufactured on a fully automatic vibro-compaction machine using minimum 6 mm thick steel production base plates, with automatic batching plant, planetary mixers and mechanized material handling system ensuring minimum human interference and consistent dimensional accuracy. Products shall undergo controlled curing in a dedicated curing chamber for achieving uniform strength and durability. |
| 30 | Supply & Installation of Rigid PE Bollard Made out of virgin PE material, the rigid bollard should have a cylindrical body with a conical shape on the top having 3 slots for pasting 50 mm Micro prismatic Type-XI or Conspicuity Tape with 10 years warranty of reflective tape and Test Certificate for better visibility at the night time. Bottom Dia should be 200 mm, total height 825 mm, with a top dia of 125 mm. Weight should not be less than 1500 gms approximately. With a thickness of 4 to 5mm, color finish should be Warm Taupe Stone or Silicon grey, as per the approved by the engineer in charge. |
| 31 | Providing and fixing precast RCC bollards of M25 grade concrete, having 150 mm diameter and 815 mm height above finished ground level, with a straight circular base of 200 mm diameter and 100 mm depth below ground with overall height as 915 mm. The top shall be chamfered/rounded and provided with two circumferential grooves of 5 mm each for fixing red-coloured retro-reflective tape. Reinforcement shall consist of 4 Nos. 6 mm dia FRP longitudinal main bars, with 6 mm dia FRP circular ties at 150 mm c/c throughout. The bollard shall have a uniform texture paint of the approved color and to be securely fixed vertically on the footpath/other surface with the specified embedment, including all materials, labour etc complete as per direction of engineer-in-charge (the payment of the retro reflective tape is to be paid separately). |
| 32 | Providing and fixing a precast RCC backless rectangular landscape bench with M 25 grade concrete and of monolithic appearance complete with precast RCC supports. The bench shall be of 1600 mm long, 450 mm depth and 450 mm high, with minimum 120 mm thick seat slab and supports/legs, having 10–15 mm chamfered or rounded edges. The supports shall be extended 100 mm below ground level with the same section and adequately embedded in firm paved base to ensure stability. comprise 4 Nos. 8 mm dia FRP vertical main bars with 6 mm dia FRP ties at 150 mm c/c, shall be provided in the seat slab and pedestal supports All reinforcement shall be securely fixed and maintained in position during casting, and shall be designed considering handling, lifting and service loads. The bench shall have a uniform texture paint of the approved color and to be securely fixed on the footpath/other surface with the specified embedment, including all materials, labour etc complete as per direction of engineer-in-charge |
| 33 | Providing and applying two-component MMA (Methyl Methacrylate) cold plastic road marking material, suitable for screed and profiled/rib markings, on properly prepared bituminous/asphalt and cement concrete road surfaces, including all materials, mixing, application and finishing, complete in all respects, conforming to the specified technical requirements, with matt, hard, uniform, durable and wear-resistant finish, recommended thickness 2 mm for screed marking and as per specified rib/profile dimensions for profiled marking, fast setting within 5–10 minutes and suitable for immediate opening to traffic,Letter Without Base including all incidental works, complete as directed by Engineer-in-Charge. |
| 34 | Providing and applying two-component MMA (Methyl Methacrylate) cold plastic road marking material, suitable for screed and profiled/rib markings, on properly prepared bituminous/asphalt and cement concrete road surfaces, including all materials, mixing, application and finishing, complete in all respects, conforming to the specified technical requirements, with matt, hard, uniform, durable and wear-resistant finish, recommended thickness 2 mm for screed marking and as per specified rib/profile dimensions for profiled marking, fast setting within 5–10 minutes and suitable for immediate opening to traffic,Zebra Marking (Red & White Colour) including all incidental works, complete as directed by Engineer-in-Charge. |
| 35 | Providing and applying two-component MMA (Methyl Methacrylate) cold plastic road marking material, suitable for screed and profiled/rib markings, on properly prepared bituminous/asphalt and cement concrete road surfaces, including all materials, mixing, application and finishing, complete in all respects, conforming to the specified technical requirements, with matt, hard, uniform, durable and wear-resistant finish, recommended thickness 2 mm for screed marking and as per specified rib/profile dimensions for profiled marking, fast setting within 5–10 minutes and suitable for immediate opening to trafficBase Paint (Any Colour), including all incidental works, complete as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender