Tender For Electrical Installation Work For Feeding Electrical Power To The Laundry Machines At The Mechanized Laundry Unit Of Murshidabad Medical Colege & Hospital Inside The Matri Sadan C Us, Berh Ore.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
31 Oct 2026
6 days left
EMD
46037
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Murshidabad → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Electrical Installation Work For Feeding Electrical Power To The Laundry Machines At The Mechanized Laundry Unit Of Murshidabad Medical Colege & Hospital Inside The Matri Sadan C Us, Berh Ore.
BOQ
| Sl. No. | Item Description |
| 1 | Supply, Installation, testing & Commissioning of Floor Mounted Cubical type, Front & back opened, Compartmentalised indoor LT Panel made by 2mm CRCA Sheet With powder coated paint, cable alley with connector at both side, hinged type door arrangement at front & back side with interconnection by suitable size copper wire/ bars as per direction of EIC incl panel foundation by PCC, comprising the following :- INCOMING: 415V, 630 A, TPN SFU( Make- L&T)------- 1 Nos. BUS BAR SECTION: 4 Nos. 415 V, 1000 A tined copper bus-bar of suitable size and length. OUTGOING: 415V, 100A, TPN SFU ( Make- L&T)- 6 Nos. 415V, 63 A, TPN SFU ( Make- L&T)- 8 Nos. METERING SECTION: Basic multi functional meter with class 1 accuracy (L&T WL 440510 0000) 3 Nos. Fuses, and 3 Nos LED indicator lamp. Danger Board- 1 No. |
| 2 | Supply, Installation, testing & Commissioning of Floor Mounted Cubical type, Front & back opened, Compartmentalised indoor LT Panel made by 2mm CRCA Sheet With powder coated paint, cable alley with connector at both side, hinged type door arrangement at front & back side with interconnection by suitable size copper wire/ bars as per direction of EIC incl panel foundation by PCC, comprising the following :- INCOMING: 415V, 630 A, TPN SFU( Make- L&T)------- 1 Nos. BUS BAR SECTION: 4 Nos. 415 V, 1000 A tined copper bus-bar of suitable size and length. OUTGOING: 415V, 100A, TPN SFU ( Make- L&T)- 2 Nos. 415V, 63 A, TPN SFU ( Make- L&T)- 4 Nos. 220V, 32 A, TPN SFU ( Make- L&T)- 6 Nos. METERING SECTION: Basic multi functional meter with class 1 accuracy (L&T WL 440510 0000) 3 Nos. Fuses, and 3 Nos.LED indicator lamp. Danger Board- 1 No. |
| 3 | Earthing with G.I. earth pipe 4.5 Meter long, 40 mmdia including accessories, and providing masonryenclosure with cover plate having locking arrange ment and watering pipe etc. with charcoal/ coke and salt as required. |
| 4 | Supplying and laying 6 SWG G.I. wire at 0.50 Meterbelow ground level for conductor earth electrode,including connection/ termination with GI thimble etc.as required. |
| 5 | Providing and fixing 25 mm X 5 mm G.I. strip onsurface or in recess for connections etc. as required. |
| 6 | Excavation of soil for installation of Earth Electrode and filling & ramming. For Soft Soil |
| 7 | Supplying and delivery of following size Armoured cables XLPE/PVC insulated are designed for 1.1 kV Stranded Aluminium conductor, high tensile galvanized steel wire/strip armour for mechanical protection, and PVC/FR PVC outer sheathing power cable of following size. (IS 7098 Part - 1/2011 with Up To Date Amendments.) |
| 8 | 4 core 240 sqmm |
| 9 | 4 core 35 sqmm |
| 10 | 4 core 25 sqmm |
| 11 | 2 core 10 sqmm |
| 12 | Laying and fixing of one number PVC insulated andPVC sheathed / XLPE power cable of 1.1 KV grade offollowing size on wall surface as required. |
| 13 | Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 14 | Above 35 sq. mm and upto 95 sq. mm (clamped with25x3mm MS flat clamp) |
| 15 | Laying of one number PVC insulated and PVCsheathed / XLPE power cable of 1.1 KV grade offollowing size direct in ground including excavation,sand cushioning, protective covering and refilling thetrench etc as required. |
| 16 | Upto 35 sq. Mm |
| 17 | Supplying & fixing 40 mm dia medium gauge GI Pipe ( ISI-Med) Protection with necessary fittings and jointing metarials as required |
| 18 | Supplying and making end termination with brasscompression gland and aluminium lugs for followingsize of PVC insulated and PVC sheathed / XLPEaluminium conductor cable of 1.1 KV grade asrequired. |
| 19 | 4 core 240 sqmm |
| 20 | 4 X 35 sq. mm (32mm) |
| 21 | 4 X 16 sq. mm (28mm) |
| 22 | 2 X 10 sq. mm (19mm) |
| 23 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 24 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 25 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 26 | 4 X 16 sq. mm + 2 X 6 sq. mm earth wire |
| 27 | 3 X 50 sq. mm + 3 X 10 sq. mm (1 no 10 sqmm for Neutral and 2 nos of 10 sqmm for earth wire) |
| 28 | Supply & delivery of 230 V, 50 Hz, single phase, 52 watts, 48\\" (1200 mm) Sweep, speed 320 rpm (minimum), A.C. Ceiling Fan and class of insu lation: B, 3 nos. metal (Aluminium alloy) blades, 30 cm long down rod (14 SWG & higher thick ness), 2 nos. canopies, safety rope, copper winding, steel/Al body. Power Factor not less than 0.9 and minimum air delivery 210 cu.m/min (minimum), without Regulator including capacitor with safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for compliant to IS 374:2019 and external connections with 1.5 sq.mm FR, PVC insulated copper conductor single core cable and earthing etc. as required. |
| 29 | Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connec ting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. |
| 30 | Supplying & Fixing iron beam fan clamp of two piece type, as per approved specification, fabri cated from 40 mm x 9 mm MS sheet flat suitable for beam having flange upto 150 mm wide – (As per Drawing no. 476 of PWD Spec ification Book – May 1991) |
| 31 | S&F 220V, 50Hz 600mm sweep all metal air circulatory wall fan to be fixed in walls as per direction of EIC.160 watt, 1400rpm |
| 32 | S&F 220V, 50Hz 100W bay light with System efficacy > 110 lm/W CRI 70+ IP66 protection to be fixed as per directions of EIC. |
| 33 | Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the require ment with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC |
| 34 | 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC As per CISPR -15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electricalcircuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin),SDCM (Standard Deviation Colour Matching) <5, |
| 35 | Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq. mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). |
| 36 | LED Street light fixture, powder coated pressuredie cast aluminium body (System lumen efficacy≥105 <120 lm/Watt) 90 watt |
| 37 | S&D 9mtr long swagged type steel tubular pole 410-SP 28 overall weight 113kg details specs as per PWD SOR VOL-1 2017 edition Pg no K-21. |
| 38 | S&F double arm bracket header fabricated from 40 mm/1.5 inch dia GI pipe 1 mtr long with pole cap to be fixed in ST pole by nuts. |
| 39 | Erection of steel tubular or rail pole strut in cementconcrete 1:3:6 (1 cement: 3 coarse sand: 6 gradedstone aggregate 40 mm nominal size) foundationincluding excavation and refilling and secured withholding clamps, bolts, nuts, etc. as required. |
| 40 | Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint |
| 41 | Supplying and fixing 415V,TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. |
| 42 | 100A FP |
| 43 | 63A FP |
| 44 | S& F 220V 32A DP MCB in MCB ss enclosure in wall by screws. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender