Tender For Redevelopment Of Public Park At Boniyar
Tender Value
25.32 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
11 days left
EMD
50640
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Redevelopment Of Public Park At Boniyar
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 2 | Providing and laying of stone soling 75mm niminal size in trenchs hand packed including all cost and carriage complete job as per direction of Engineer Incharge at Site. |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 6 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 7 | Providing wood work in Ornamental frame/colums carved design as per direction of Engineer Incharge at site complete job and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length including (hold fast lugs or with dash fasteners): First class kail wood. |
| 8 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 9 | Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete First class Budloo/Fir wood |
| 10 | Providing/Fixing 12mm Commercial ply wood board for false ceiling incl. cost of nails, screws etc. all carriages and cost of materials included complete job |
| 11 | Providing and fixing plained eaves boarding. 2nd class kail wood 250x32 mm (nominal size ) |
| 12 | Providing/Fixing pinjara work (Wooden) as per design of First class kail wood including frame work 1st class kail wood in (50x12) mm beading compleate including polish with rwo or more coats |
| 13 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/firwood excluding the cost of frame work which is to be paid separately. Chaar Gul |
| 14 | French spirit polishing, Two or more coats on new works including a coat of wood filler |
| 15 | Providing & Fixing coated galvanized Hi-Rib Profile Sheets 0.50mm TCT having a crest height of 28-32mm at 195mm pitch using self driving and self tapping fastners (including cost of all materials, leads, lifts and carriage etc upto site of work complete) incl. cost of valleys/ridges |
| 16 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 17 | Carriage of materials by Mechanical Transport including loading, unloading and stacking complete job: |
| 18 | Sand lead upto 30 km |
| 19 | Stone aggregate lead upto 30 km |
| 20 | Supply and installation of a see-saw with the following specifications: Seating capacity: 4 people Dimensions: 8 x 3 x 2 feet Material of construction: Main frame: Mild Steel (M.S.) pipe, B class, 40 mm bore Seats: Fiberglass Reinforced Plastic (FRP) with a thickness of at least 6 mm the equipment shall be duly anchored with rcc foundation with base plates 8mm thick and anchored with 16mm dia Anchor Bolts 450mm long (where ever required). including all cost and carriage complete job as per direction of Engineer incharge at site |
| 21 | Supply and installation of Children Quadruple Playing Station(consisting of different types of slides viz wavy slide, spiral slide, straight tube slide etc and a stair with HDPE grip ) of approved brand and manufacture and size not less than ( 30 x 20 x 12} feet .With a base plate 1x1 ft and 8 mm thick fixed and anchored with 16 mm dia Anchor Bolts . MOC: Vertical Pipes 80 NB GI Pipes B class heavy duty, FRP for slides not less than 6 mm thick.For interconnections MS class B of diameter not less than 30 mm/or equivalent . The playstation should be able to bear a load of minimum 2000 kgs conforming to representational images/drawings. the equipment shall be duly anchored with rcc foundation with base plates 8mm thick and anchored with 16mm dia Anchor Bolts 450mm long (where ever required).including all cost and carriage complete job as per direction of Engineer incharge at site |
| 22 | Supply , Installation of dual set Chain Swing with FRP seats of thickness not less than 6mm and holding weight upto 100 Kg of size 10' x 4' x 8' made out of 80 mm GI pipe class C , attached SS chain with base plates 1x1 feet and 8 mm thick fixed and anchored with 16 mm dia Anchor Bolts conforming to representational images/drawings.the equipment shall be duly anchored with rcc foundation with base plates 8mm thick and anchored with 16mm dia Anchor Bolts 450mm long (where ever required). including all cost and carriage complete job as per direction of Engineer incharge at site |
| 23 | Supply and Installation of M S monkey climber of size 10' x 3' x 8' made of MS class B pipe of diameter not less than 50 mm for vertical supports and diameter not less than 30 mm for interconnecting pipes placed uniformly.Frame shall be duly anchored with the foundation conforming to representational images/drawings. Load bearing capacity ≥300 kgs Climbing grips:HDPE the equipment shall be duly anchored with rcc foundation with base plates 8mm thick and anchored with 16mm dia Anchor Bolts 450mm long (where ever required). including all cost and carriage complete job as per direction of Engineer incharge at site |
| 24 | Supply and installation of double Animal see-saw with following specifications: Seating capacity: 2 people Dimensions: 8 x 3 x 2 feetMaterial of construction: Main frame: Mild Steel (M.S.) pipe B class of minimum 40 mm bore. Seats: Fiberglass Reinforced Plastic (FRP) with a thickness of at least 6 mm Base plate: M.S (1ft x1ft) and 8 mm thick, secured and anchored with 16 mm diameter anchor bolts as per representational images/drawings. the equipment shall be duly anchored with rcc foundation with base plates 8mm thick and anchored with 16mm dia Anchor Bolts 450mm long (where ever required) including all cost and carriage complete job as per direction of Engineer incharge at site |
| 25 | Supply and Installation of Spring Ride Horse/dolphin/duck (01 each) of capacity 01 people (40KG) and FRP Seat material duly anchored with the help of 16mm bolts to the foundation , Spring material ; heavy duty GS/SS as per representational images/drawings. the equipment shall be duly anchored with rcc foundation with base plates 8mm thick and anchored with 16mm dia Anchor Bolts 450mm long (where ever required). including all cost and carriage complete job as per direction of Engineer incharge at site |
| 26 | supplying prroviding and fixing of M.S three seater benches of required size 56AD X 160W X 77H centimetres made in leg support/cast iron/ seating material slats/strips- 4mm thick and strong FRP (Fibre-Reinforced Plastic) Duly painted with spray paint of approved shade & pattern.the equipment shall be duly anchored with rcc foundation with base plates 8mm thick and anchored with 16mm dia Anchor Bolts 450mm long (where ever required). including all cost and carriage complete job as per direction of Engineer incharge at site |
| 27 | Engagement of JCB for removal of tree trunks, roots and site clerance including leveling of ground and reomoving of worm out (damaged) equipments at site including dismantling of old worn out gate and stairs complete job as per direction of Engineer incharge at site |
| 28 | Supply and Earth filling with good earth free from weeds/vegitation/ debris excluding rocks including digging earth carrying by lorry, placing, watering, dressing and ramming with hand rammers in layers upto 200mm thick including all leads, lifts and carriage of material upto 10 Km complete including Royality and including all cost and carriage complete job as per direction of Engineer incharge at site |
| 29 | Grassing with selection no. 1 grass including watering & maintenance ofthe lawn for 30 days or more till the grass forms a thick lawn free from weeds & fit for mowing including supplying of good earth if needed (the good earth shall be paid separately.) In rows 5 cm apart in either direction |
| 30 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm |
| 31 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil : |
| 32 | Providing and laying of stone soling 75mm niminal size in trenchs hand packed including all cost and carriage complete job as per direction of Engineer Incharge at Site. |
| 33 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 34 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 35 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 36 | Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to matchthe shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) Light shade using white cement |
| 37 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Riveted and bolted |
| 38 | Carriage of materials by Mechanical Transport including loading, unloading and stacking complete job: |
| 39 | Sand lead upto 30 km |
| 40 | Stone aggregate lead upto 18 km |
| 41 | Taking of Geo Tag Photographs of size 125mmx250mm before execution, during execution and after execution of work (04 No. Each Pre, Post, After execution) to be submitted with the bill complete job. (Geo Tag Photographs showing Name of Work, Location and Longitude/ Latitude).(Pre, Post, After execution). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysOct 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender