Tender For Day To Day Repair And Maintenance To T.E. Bulding & Bsnl Staff Quarters At Jayadev Vihar & Chandrasekharpur, Bhubaneswar For The Fy-2026-27.
Tender Value
2.96 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
0 days left
EMD
5930
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Day To Day Repair And Maintenance To T.E. Bulding & Bsnl Staff Quarters At Jayadev Vihar & Chandrasekharpur, Bhubaneswar For The Fy-2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Sub-Head : Earth Work |
| 2 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift upto1.5 m. |
| 3 | All kinds of soil. |
| 4 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared. |
| 5 | Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 6 | Sub-Head : Concrete Work |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 8 | 1:2:4 (1 Cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources). |
| 9 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 10 | Sub-Head : Reinforced Cement Concrete |
| 11 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but, excluding cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
| 13 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 14 | Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand). |
| 15 | Sub-Head : Masonry Work |
| 16 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 5.0 in foundation and plinth in: |
| 17 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 18 | Sub-Head : Wood and P.V.C. Work |
| 19 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). |
| 20 | Sal wood |
| 21 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. |
| 22 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 23 | Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete (Copper oxidised as per IS 1378) |
| 24 | 300 mm weighing not less than 330 grams |
| 25 | Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. |
| 26 | 50 mm |
| 27 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 28 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 29 | 250x16 mm |
| 30 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 31 | 200x10 mm |
| 32 | 150x10 mm |
| 33 | Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 34 | 100 mm |
| 35 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 36 | Twin rubber stopper |
| 37 | Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer-in-charge. |
| 38 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge. |
| 39 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing. |
| 40 | 30 mm thick plain PVC door shutters. |
| 41 | Sub-Head : Steel Work |
| 42 | Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. |
| 43 | 10 x 140 mm |
| 44 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows all complete with : |
| 45 | 4.0 mm thick glass panes. |
| 46 | Sub-Head : Flooring |
| 47 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 48 | 40 mm thick with 20 mm nominal size stone aggregate |
| 49 | Sub-Head : Roofing |
| 50 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 51 | (i)Single socketed pipes. |
| 52 | 110 mm diameter |
| 53 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 54 | Bend 87.5° |
| 55 | 110 mm bend |
| 56 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 57 | 110 mm |
| 58 | Sub-Head : Finishing |
| 59 | 12 mm cement plaster of mix : |
| 60 | 1:6 (1 cement: 6 fine sand) |
| 61 | 15 mm cement plaster on the rough side of single or half brick wall of mix : |
| 62 | 1:6 (1 cement: 6 fine sand) |
| 63 | Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces: |
| 64 | One coat |
| 65 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 66 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. |
| 67 | Old work (one or more coats) |
| 68 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 69 | One coat. |
| 70 | White washing with lime to give an even shade : |
| 71 | Old work (two or more coats) . |
| 72 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 73 | One or more coats on old work. |
| 74 | Finishing walls with water proofing cement paint of required shade : |
| 75 | Old work (one or more coats @ 2.20 kg/10 sqm) complete. |
| 76 | Sub-Head : Repairs to Buildings |
| 77 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. |
| 78 | With cement mortar 1:4 (1 cement : 4 fine sand). |
| 79 | Renewing glass panes, with wooden fillets wherever necessary: |
| 80 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 81 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 82 | Cleaning and de-silting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. |
| 83 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin-Charge. |
| 84 | (a) Internal Work- Exposed on wall |
| 85 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 86 | Sub-Head : Dismantling and Demolishing |
| 87 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 88 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 89 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. |
| 90 | In cement mortar |
| 91 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 92 | Of area 3 sq. metres and below |
| 93 | Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : |
| 94 | 100 mm dia pipe |
| 95 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : |
| 96 | 15 mm to 40 mm nominal bore |
| 97 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 98 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 99 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 100 | Sub-Head : Sanitary Installations |
| 101 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : |
| 102 | Orissa pattern W.C. pan of size 580x440 mm |
| 103 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 104 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 105 | 10 litre capacity - White |
| 106 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : |
| 107 | White solid plastic seat with lid |
| 108 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : |
| 109 | Flat back wash basin of size 550x400 mm. |
| 110 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 111 | Semi rigid pipe |
| 112 | 32 mm dia |
| 113 | 40 mm dia |
| 114 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 115 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 116 | Sub-Head : Water Supply |
| 117 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 118 | 20 mm nominal outer dia. Pipes. |
| 119 | 25 mm nominal outer dia .Pipes. |
| 120 | 40 mm nominal outer dia. Pipes. |
| 121 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 122 | 30 cm length |
| 123 | 15 mm nominal bore |
| 124 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 125 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: |
| 126 | 15 mm nominal bore. |
| 127 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 128 | 15 mm nominal bore |
| 129 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 : |
| 130 | 15mm nominal bore |
| 131 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 132 | 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 133 | Providing and fixing PTMT stop cock of approved quality and colour. |
| 134 | 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 135 | Providing and fixing PTMT pillar cock of approved quality and colour . |
| 136 | 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. |
| 137 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. |
| 138 | 25 mm nominal bore, 152 mm long. Weighing not less than 440 gms. |
| 139 | Sub-Head : Aluminium Work |
| 140 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 141 | For fixed portion |
| 142 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 143 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). |
| 144 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 145 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. |
| 146 | Pre-laminated particle board with decorative lamination on both sides. |
| 147 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 148 | With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) |
| 149 | Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-in-charge |
| 150 | Anodized (AC 15 ) aluminium |
| 151 | Sub-Head : MARKET RATED ITEMS |
| 152 | Supplying & engaging unskilled labour along with T&P for cleaning of roof terrace , chajja, rain water pipe mouth, drains & cleaning of bushes ,jungles etc. as & when required as per direction of Engineer-in-Charge. |
| 153 | Providing & erecting single scaffolding system on the external side of building upto three storey height made of best quality bamboo ballies @ 1.5 m centre to centre in both directions including bracing & stiffening as required. |
| 154 | Shifting and re-fixing of scaffolding materials for removing trees from the external walls and roofs of staff Qtrs. up to height about 10.00 mtr.as per the direction of E-I-C. |
| 155 | Providing and fixing CP hygenic health faucet with flexible chrome hose, handset & bracket of Jaquar(Jaquar ALD-CHR-573) or equivalent make as per the direction of E.I.C. |
| 156 | Easing and adjusting of Door/window shutter(steel/wood)for free movement of the same by making minor mending / repair to the shutter & frame including providing steel screws wherever required all complete per direction of Engineer-in-charge. |
| 157 | Cleaning of choked manhole chambers including removing the waste & sludge deposits and flushing of sewer line between manholes with sufficient water while rodding with split bamboo etc. all complete as per direction of Engineer-in-Charge. |
| 158 | Providing & fixing PVC ball valve with handle of approved quality in existing pipe line including removing the damaged valve etc. all complete as per the direction of Engineer-in-Charge. |
| 159 | 25 mm dia pvc ball valve |
| 160 | Trimming / pruning of trunks and branches of trees of girth upto 30 cm including making all safety arrangements & disposal of waste materials in the dumping bin / yard etc complete as per direction of Engineer-in-charge. |
| 161 | Credit for taking into possession unserviceable dismantled GI / CI pipes & fittings |
| 162 | Credit for taking into possession unserviceable recovered water supply fittings / fixutures such as brass/c.p. brass/gun metal bib-cock, stop-cock, pillar cock, gate valve upto 25 mm dia and the like on as is where is condition. |
| 163 | Removing trees and plants from roofs and walls of buildings up to any height either by physically uprooting the same or by pressure spraying suitable herbicide solution like Glyphosate 41% SL (Trade Name-Glypho Star) of Vedic Agro Science Pvt. Ltd. or other equivalent product with all due precautions on the entire exposed plant organs as per company's recommendations and instructions including making good the damages caused with cement plaster 1:4 or cement concrete 1:2:4 as needed etc all complete. The rate includes all materials, labour, T&P & incidentals etc. complete but excluding the cost of scaffolding, if applicable, which is to be paid extra. |
| 164 | Cleaning of open surface drain of any size i/c removal of debrishes, clay deposit & disposal within a lead of 50m all complete as directed by Engineer-in-charge. |
| 165 | Providing and fixing 15 mm nominal bore C.P. brass two way bib cock of Plaza or equivalent make as per the direction of E.I.C.: Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender