Tender For Smart Periodical Services To Md Accn In Aor Of Age B/R-I Patiala Of Ge(N) Patiala
Tender Value
Ref. Documents
Estimated cost
Bid Submission
14 Nov 2026
23 days left
EMD
1.30 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patiala → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Smart Periodical Services To Md Accn In Aor Of Age B/R-I Patiala Of Ge(N) Patiala
BOQ
| Sl. No. | Item Description |
| 1 | M&L for applying acrylic wall care putty on internal surfaces of walls/ceilings/soffits (as required for desired smoothness and leveling of surfaces in two or more layers) by using ready made acrylic wall care putty including sand papering after applying the putty, to make surface smooth and ready for receiving painting etc complete all as specified and directed by Engr-in- Charge.Notes : (i) The prepared surface after applying wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes.(ii)The make of acrylic wall care putty shall be as per the recommendation of manufacturer of paint. |
| 2 | Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed. |
| 3 | M&L for rendering 15 mm thick in cement mortar 1:4 , mixed with water proofing compound, on brick or concrete surfaces, trowelled to even and fair finish without using extra cement complete all as specified and directed.NOTE: WPC shall be paid and measured separately. |
| 4 | Supply only Water proofing compound complete all as specified and directed. |
| 5 | M&L for rendering 10 mm thick in cement mortar 1:6, on brick or concrete surfaces, trowelled to even and fair finish without using extra cement complete all as specified and directed. |
| 6 | M&L for rendering 5 mm thick in cement mortar 1:3 as on concrete surfaces in ceiling finished even and smooth without using extra cement complete all as specified and directed. |
| 7 | Complete removal of existing treatment of any type/description from walls/RCC surfaces etc with mechanical means/grinder complete all as specified and directed. |
| 8 | Material & labour Applying 02 coats of exterior emulsion weather proof paint (light shade) to external old plastered walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surface complete all as specified and directed. |
| 9 | M&L for Preparation of new/old plastered surfaces to external walls/RCC surfaces/soffits of chajjas/roof projections/ cantilevers/ balcony etc including cornices and applying two coats of cement base paint over and including a coat of priming coat complete all as specified and directed |
| 10 | M&L for preparation of new plasterd surface and applying two coat of oil bound distemper on wall and including a coat of interior primer with rollers complete all as specified and directed. |
| 11 | Material & labour Applying 02 coats of interior oil bound distemper (light shade) to old plastered wall surfaces complete all as specified and directed. |
| 12 | Material & labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash , complete all as specified and directed by Engineer-in-Charge. |
| 13 | M & L for preparing existing treated surfaces on Ceiling including cornices and applying one coat of white wash complete all as specified and as directed by Engineer-in-Charge. |
| 14 | M&L for preparation of old surfaces of wall/ceiling and applying one coat of oil bound distemper complete all as specified and directed. |
| 15 | M&L for preparing old surfaces of wall and applying one coat of cement base paint complete all as specified and directed. |
| 16 | M&L for Preparation of external surfaces and applying one coat of exterior emulsion paint (light shade) to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces by using brush/rollers over and including filling any holes with putty complete all as specified and directed. |
| 17 | S&F 5mm PVC acrylic sheet fixed with studs on wall of Bldgs having letters 15 cm high lettrs incl stops,commas,short lines,dashes ,hyphens,brackets etc made of Acrylic Embossed Lettrs with Mirror shine for Bldgs complwte all as specified and directed |
| 18 | Supply and apply of rust remover cum passivator by brush in two coat @ 0.3 kg/m2/coat of Density: 1.01 Kg/l at 300C complete all as per manufacturer's instructions and all as specified.Make/Product: Sika Rustoff 100 or equivalent from Fosroc,Dr Fixit |
| 19 | Supply and apply cementitious coating for corrosion protection having a cement base polymer modified rebar corrosion protection system by applying the first coat approx 1mm thick layer of product carbonation resistance 2mm of sikatop ArmatecR -108 or equivalent as specified corresponds to 20 mm of normal mortar;bond strength 1N/mm2 according to ASTM C 882-78 applying @ 4kg/m2 for two coats onto the prepared reinforcing steel with a medium-stiff brush.it is unavoidable that specified product will also be applied in the same way after a waiting time of 2-3 hours (+20C) complete all as per manufacturers instructions and all as specified. Make/Product: Sika Rustoff 100 or equivalent from Fosroc,Dr Fixit |
| 20 | Material & labour Proving ,mixing & applying two components Epoxy resin concrete bonding coat on prepared RCC surfaces as per manufacturers apecification incl prepration of surface by chipping and throughly cleaning of surface complete wherever required and as per directions of Engineer-in-charge.Consumption: o.5 kg/m2 complete all as per manufacturers instructions and all as specified.Product requirements : complies with ASTM C 881 Type II Grade 2 class B+C.Make/Product: Sika Rustoff 100 or equivalent from Fosroc,Dr Fixit |
| 21 | Supply and apply a pre-batched one component polymer modifies cementitious patch repair mortar in 25mm thickness.Yield:approx 0.84 ltr/kg.System requirements:compressive strength =50 N/mm2 (28 days)according to ASTM C 109 : flexural strength = 3 N/mm2 (7 days)according to ASTM C 293-79consumption of 2.1 kg/sqm/mmMake/Product: Sika Rustoff 100 or equivalent from Fosroc,Dr Fixit |
| 22 | Material & labour for Repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes complete all as specified and directed. |
| 23 | M & L for preparing old painted steel and iron surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed. |
| 24 | M & L for preparing old painted wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 25 | Material and Labour for exterior painting work on old surface including complete removal of existing loose paint layers till plaster level by using jet pressure washer and crack filling up to 3mm by using crack seal & up to 10mm by using textured crack filler. Touch-up by using wall putty with silicon additives followed by application of one coat of truecare exterior primer on walls and Chajjas and applying two coats of modified acrylic smooth emulsion exterior grade with silicon having anti-algal and Dust pickup resistance properties, Material should be applied as per manufacturer instructions by using fully automatic air less spray machine having flow speed of minimum 1ltr per minute and pressure of 3300 PSI complete all as specified and directed. |
| 26 | Material and Labour for exterior painting work on new plastered surface including touch-up by using wall putty with silicon additives followed by application of one coat of truecare exterior primer on walls and Chajjas and applying two coats of modified acrylic smooth emulsion exterior grade with silicon having anti-algal and Dust pickup resistance properties, Material should be applied as per manufacturer instructions by using fully automatic air less spray machine having flow speed of minimum 1ltr per minute and pressure of 3300 PSI. |
| 27 | M&L for 4 mm thick sheet glass ordinary quality and glazing fixed with oil putty/beading of any size in each pane as in repair and complete all as specified and directed by Engr-in-Charge. |
| 28 | Notes for item No 25 and 26 :-(a) The work pertaining to periodical services shall be executed by the contractor as per MOU from authorised applicator through manufacturer of the materials like Exterior Emulsion paint, putty etc.(b) The Contractor shall upload with the documents under cover I \\"Memorandum of Understaning\\" (MOU) as per format given in Annexure 'A' after BOQ on page No 27 & 28 with atleast one of the manufacturer mentioned in the contract, failing which the bid shall be laible to be rejected.(c) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work and protective measures.(d) Removing of Nails, making good holes, cracks etc.(e) Work in patches and in narrow/widths, bands, cornices, pilasters etc and cutting in edge of line where necessary(f) Spreading and removing covering of doors, windows, floors, fittings etc to protect them from splashes.(g) Washing floors, cleaning glass, joinery, electric fittings, wiring etc Drops and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender