Tender For Construction Of Retaining Wall Across The Road Opposite To Kill House And Provision Of Deep Burial Pit For Biomedical Sharp / Metallic Waste And Ss Lab Sink For Reagent Washing In Pathology Dept At Inhs Dhanvantari Under Ge Minniebay, Sri
Tender Value
39 Lakhs
Estimated cost
Bid Submission
07 Nov 2026
6 days left
EMD
78000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Retaining Wall Across The Road Opposite To Kill House And Provision Of Deep Burial Pit For Biomedical Sharp / Metallic Waste And Ss Lab Sink For Reagent Washing In Pathology Dept At Inhs Dhanvantari Under Ge Minniebay, Sri Vijaya Puram (8873/E8)
BOQ
| Sl. No. | Item Description |
| 1 | Excavation over areas n exc 1.5 m in depth for foundation, etc. and getting out in soft/loose soil complete all as specified and as directed. |
| 2 | Excavation over areas exc 1.5 m in depth but n.exc 3.00m; for foundation, etc. and getting out in soft/loose soil complete all as specified and as directed. |
| 3 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft loose soil complete all as specified and directed. |
| 4 | M & L for PCC 1:4:8 with type D2 using 40 mm graded crushed stone aggregate as in filling, foundation and mass concrete complete all as specified and as directed. |
| 5 | M&L for Design mix RCC M-30 (using 20mm graded stone aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed |
| 6 | M&L for Design mix RCC M-30 (using 20mm graded stone aggregate) in Walls, retaining walls,basement walls, ballast walls and the like; anythickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed |
| 7 | M&L for use and waste form work to sides of concrete foundations, footings, rafts, and raft beams sides and soffit of foundations and plinth beam and similar work for flat rough finished surface complete all as specified and as directed. |
| 8 | M&L for use and waste form work to faces of walls retaining walls, abutments, parapets and like for flat rough finishesd surface complete all as specified and as directed. |
| 9 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 10 | M&L for 110 mm bore PVC pipes as in weep holes complete all as specified and as directed. |
| 11 | M&L for broken stone or boulders including hand packing (any thickness) at back side of weep holes and raising or lowering to the required level complete all as specified and as directed. |
| 12 | Return filling in Surplus soil, back filling of retaining wall including spreading, levelling, watering and well ramming in layers n.exc. 25cm complete all as specified and as directed. |
| 13 | M&L Precast cement concrete block masonry type C1 1:3:6 (20mm graded agg) with solid block exc 10cm in width and setting in CM 1:6 complete all as specified and as directed. |
| 14 | M & L for rendering 5 mm thick in cement mortar 1:4 over a backing coat of 10mm thick in CM 1:6 (Total 15 mm thick) on concrete or brick masonry surfaces and finishing the top surface even and fair without using extra cement complete all as specified and as directed. |
| 15 | M & L preparation of newly surfaces of wall for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 16 | M & L for providing cement concrete with type B1 (20 mm graded stone aggregate) as in coping complete all as specifed and directed. |
| 17 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified. |
| 18 | Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30cm thick; watering, ramming /rolling and finishing to required size, shape, etc., n exc. 1.5m high from base complete all as specified and as directed. (Note : Soil removed from excavation shall be utilised under this item.) |
| 19 | M&L Rendering 10 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished fair and even without using extra cement. |
| 20 | Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 21 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 22 | M&L for Type B0 1:2:4 (12.5mm graded aggregate) as in Slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves, Chajjas filling in steel frames and the like complete all as specified and directed. |
| 23 | M&L for 20mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 20 mm thick screed bed in CM 1:6.complete all as specified and directed. |
| 24 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as directed by Engr in Charge. |
| 25 | Mild steel, plain, black sheet 1mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed. |
| 26 | S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed. |
| 27 | S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 28 | Supply and laying of CPVC pipes 20 mm dia outer bore SDR 11 &plain CPVC SDR 11 fittings on walls /ceilings or laying in floors complete all as specified. |
| 29 | Supply and laying of CPVC pipes 25mm dia outer bore SDR 11 &plain CPVC SDR 11 fittings on walls /ceilings or laying in floors complete all as specified. |
| 30 | M&L Cutting chases in concrete block walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing etc., and making good, cutting not ecx 10 cm girth complete all as specified and directed. |
| 31 | M&L for glazed ceramic tiles 350 x 250x 7mm / 450x300x 7mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick backing in cement mortar (1:3) all as specified and directed |
| 32 | M&L Hardcore (Broken stone) of guage exc 63mm but n exc. deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as spd |
| 33 | M&L for 100mm thick PCC 1:3:6 type C-2 (40mm graded stone aggregate as in subbase complete all as specified and directed. |
| 34 | M & L for 25 mm thick, PCC 1:2:4, Type B-0, using 12.5mm graded aggregate as in Sub base for flooring/levelling coarse, sunken floor etc complete all as specified and as directed. |
| 35 | S&F quarter turn Bip taps with flange, cast copper alloy, 15mm dia, chromium plated, Fancy type for iron pipe and fixed etc., complete all as specified and directed. Make:Jaquar/Prayag/Parry ware(Super fine), Prima, Pearl) |
| 36 | M&L for complete removal of existing treatement and applying two coats of plastic emulsion paint over a coat of primer on wall surface all as specified and directed. Make: Asian Paint Apcolite Advanced Premium Emulsion Paint or equivalent as approved by GE. |
| 37 | M&L for preparation of old plastered surface and applying one coat of 100% premium acrylic emlusion paint having VOC less than 50gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of WHITE COLOUR with silicon additives coat applied @1.67litre/10sqm over complete all as specified and as directed.Note: Asian Paints( Apex Ultima), Berger (weather coat Long life Fiexo) Nerolac (Excel Total), Shalimar Paints (Weatherpro+Super Luxury Emulsion) The rate inclusive of scaffolding at any height |
| 38 | M&L for Providing and applying plaster of paris putty of 1 mm thickness over plastered/ complete removed surface to prepare the surface even and smooth complete all as specified and directed. |
| 39 | M&L for applying two coats of synthetic enamelled paint over a coat of red oxide on new steel or iron surface based materials of any description , not other wise described over 10 cm width or girth including preparation of new surfaces. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender