Tender For Shifting Of Shibnagar- Ii Li Scheme At K.K.Nagar Gp Under Bishalgarh R.D Block During The Year 2026-27 / Sh: Re-Construction Of Pump House And Other Allied Works Under Wr Sub- Division Bishalgarh. Dniet No:- 48/Ee/Wrd-Ii /2026-27
Tender Value
9.66 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
10 days left
EMD
19325
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Shifting Of Shibnagar- Ii Li Scheme At K.K.Nagar Gp Under Bishalgarh R.D Block During The Year 2026-27 / Sh: Re-Construction Of Pump House And Other Allied Works Under Wr Sub- Division Bishalgarh. Dniet No:- 48/Ee/Wrd-Ii /2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Dismentaling of old pump/motor from base & stacking of materials & return the same to Sub-Divisional store as per direction of the Engineer-in-Charge. |
| 2 | Dismantling GS sheet roofing including ridges, hips, valleys, gutters wind ties etc. including dismembering and stacking of serviceable materials and unserviceable materials separately with all lifts and upto a lead of 50 m etc.complete as per direction of the Engineer- in-charge. |
| 3 | Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead :Of sectional area beyond 40 sq cm. |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.-All kinds of soil |
| 5 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 6 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.-All kinds of soil |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centring andn shuttering --All work upto plinth level:1:3:6 ( 1 Cement: 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) |
| 8 | 1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brick aggregate 20 mm nominal size) |
| 9 | First class brick work in foundation and plinth including cost of all materials as required complete:-In cement mortar 1:4 ( 1cement : 4 fine sand) |
| 10 | Half brick masonry work with first class bricks in foundation and plinth including cost of all materials as required complete:-In cement mortar 1:4(1 cement : 4 fine sand ) |
| 11 | Providing structural steel work in single section fixed with or without connecting plate including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer all complete as required. |
| 12 | 12 mm cement plaster of mix Cement mortar 1:4 (1 cement : 4 fine sand) |
| 13 | Neat cement punning |
| 14 | Providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. all complete as per direction of Engineerin- charge.40mm thick. |
| 15 | Providing and fixing M.S. round holding down bolts with nuts and wahser plates complete as per standard design. |
| 16 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete.Fixed to openings /wooden frames with rawl plugs screws etc. |
| 17 | Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required etc. complete as per direction of Engineer-in-charge.0.63mm thick with zinc coating not less than 275gm/m2 |
| 18 | Labour charge for fixing corrrugated GS sheet roofing in/c vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm dia with bitumen and GI limpet washers filled with white lead and in/c a coat of approved steel primer and two coats of approved paint on over lapping of sheets complete ( up any pitch in horizontal / vertical or curved surface) ex/c the cost of purline, rafters and trusses and in/c cutting to size and shape whever required.g) 0.63mm thick with zinc coating not less than 275gm/Sqm. |
| 19 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position : Local Teak Wood |
| 20 | Providing and fixing panelled / or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked bright finished / black enamelled M.S butt hinges with necessary screws excluding panelling and or glazing, which will be paid for separately but including the wooden beading of 20 × 12 mm for fixing panelling and or glazing as per direction of Engineer-In-Charge.Gamair Wood35 mm thick shutters |
| 21 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing andreinforcement-1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brick aggregate 20 mm nominal size) |
| 22 | Centering shuttering including struttings, propping etc. and removal of form work for:Foundations, footings, bases for columns etc. for mass concrete with timber plank |
| 23 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 24 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :New work (two or more coats) including a coat of appropriate steel primer but excluding a coat of mordant solution. |
| 25 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content [Payment shall be made after submission of Test Certificate issued by the Manufacturer].With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre. |
| 26 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]:Two or more coats on new work |
| 27 | Dismentaling of pump for over hauiling including greasing, gland packing, necessary repairs & reinstallation of the same including trial run for 10 hrs. in two spell complete as per direction of the Engineerin- Charge.For LI |
| 28 | Providing and fitting fixing of M.S shore manifold made with 3mm thick MS sheet of size one way 315 mm dia & three way 125 mm dia made with suitable flange(all end) including coating with steel primer(tailpiece if required will be paid separately) including proper alignment with pipe line & earth cutting, backfilling complete as per direction of Engineer-in-charge. |
| 29 | Providing and fixing G.I. pipes of medim class as per IS : 1239 with latest amendment complete with G.I. fittings and clamps, including cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in - charge. Internal work - Exposed on wall. 40 mm dia. nominal bore |
| 30 | Providing and fitting fixing of brass fullway valve with handle in the GI pipe line including cutting, threading etc. complete as per CPWD specification and direction of the Engineer - in - charge.v. 40 mm dia |
| 31 | Dismentling of pannel board by disconnection of all electrical equipments & stacking of materials & return the same to Sub Divisional store as per direction of the Engineer-in-charge. |
| 32 | Providing & fitting fixing of pannel board of local teak wood for fitting & fixing of electrical items including 2 Each. MS angle post ( Size 50X50X6mm 2.80 Mtr. long) nuts& bolts etc. for errection of the same by 1 : 1.5 : 3 cement concreate casting (1feetX1feetX2feet) below the ground level and painting two or more coats of synthetic enamel paint on primer as per direction of Engineer-in-Charge.Size 1.80 X 1.20 X 0.025 mtr. |
| 33 | Labour charge for reinstallation of all electrical equipments (dismentalled serviceable materials, if any additional / replacement of electrical eqiupments required will be paid separtely) on the pannel board including trial run for 10 hrs in two spell complete as per direction of the Engineer-in Charge. |
| 34 | Providing and fixing MS bolts including nuts and washers complete as per standard design:- Above 300mm length. |
| 35 | Dismentaling of G.I pipe including necessary earth cutting etc. & return the same to Sub-Divisional store as per direction of the Engineer-in-Charge.125/150 mm dia |
| 36 | Dismentaling of G.I bend including necessary earth cutting etc. & return the same to Sub-Divisional store as per direction of the Engineer-in-Charge.125/150 mm dia |
| 37 | Installation of pump motor set including carriage of materials from Departmental store yard to site of work and making necessary electrical connection with main switch / starter with motor in/c commissioning & trial run for 10hrs. in two spell as per direction of the Engineer-in-charge. |
| 38 | Labour charge for laying of G.I pipe conforming IS 1161,3589 & 1239 including fitting fixing complete as per direction of Engineer-in- Charge.150 mm dia nominal bore (medium) |
| 39 | 125 mm dia nominal bore (medium) |
| 40 | Providing & fitting fixing of MS flange ( 8 mm wall thickness) by welding with G.I. / MS pipe and placing position as per specification and the direction of the Engineer-in-charge.i. 150 mm dia |
| 41 | ii. 125 mm dia |
| 42 | Providing & fitting fixing Rubber flange washer 6 mm thick at site of work of approved quality.150 mm dia |
| 43 | 125 mm dia |
| 44 | Providing and fitting fixing PVC suction hose pipes of wall thickness 6 mm. as per relevant IS specification and direction of Engineer-in-charge. 150 mm dia |
| 45 | Providing and fitting fixing M.S. clamp for hose pipes with nuts & bolts complete as per relevant IS specification and direction of Engineer-in-charge.iv. 150 mm dia |
| 46 | Providing and fitting fixing MS Foot valve as per relevant IS specification and the direction of the Engineer-in-charge.iv. 150 mm dia |
| 47 | Supplying & fitting fixing manually operated oil immerged starter of approved quality.30HP Osco/BCH Make |
| 48 | Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), 415/500 Volt, L & T / Havells / BCH make etc. complete as per specification and direction of the Engineerin-charge.63 amps |
| 49 | 200 amps |
| 50 | Providing and fitting fixing of moving iron type, Range 0-500 V, 96 mm x 96 mm size AC Volt meter ( L & T / AE make) with selector switch as a electrical instrument of the pannel board as per specification and direction of the Engineer -incharge. |
| 51 | Supplying and fitting fixing AC Ammeter (Moving Iron) on the panel board of approved quality.SMI-144, Range 0-10A |
| 52 | Supplying and fitting fixing of selector switch on the panel board of approved quality. |
| 53 | Supplying & fitting fixing of PVC insulated Copper Wire with all electrical equipments including trial run etc. complete (ISI Marked) on the pannel board of approved quality.7/16 Copper Wire |
| 54 | Providing & fixing 200 Amps busbar of size 600X 450X100 mm with 4 Each. copper strip of size 450X40X4 mm of approved quality. |
| 55 | Providing and fixing G.I. pipes medim class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling, cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in - charge. External work. 125 mm dia. nominal bore |
| 56 | 150 mm dia. nominal bore |
| 57 | Providing and fixing G.I. Bend /elbow in the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. 125 mm dia. |
| 58 | 150 mm dia. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender