Tender For Providing And Installation Of Smart Traffic Signals Lights Including Pedestrian Signal Lights And Integration With Iccc, Gmda In Gmda Area, Gurugram.
Tender Value
3.09 Crore
Estimated cost
Bid Submission
05 Nov 2026
20 days left
EMD
6.19 Lakhs
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gurgaon → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing And Installation Of Smart Traffic Signals Lights Including Pedestrian Signal Lights And Integration With Iccc, Gmda In Gmda Area, Gurugram.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and installation of Smart Traffic signals lights |
| 2 | Supply and Laying of PVC insulated (Heavy Duty)under ground copper conductor 1.5 sq.mm 12 core armoured cable as per IS7098, suitable for A.T.C Signals 660:1100 volts below ground level in existing or in trench, controller to junction box.) upto the entire satisfaction of engineer-in-charge. Make:- Polycab, Havells, Finolex. |
| 3 | Supply and Laying of PVC insulated (Heavy Duty)under ground copper conductor 1.5 sq.mm 6 core armoured cable as per IS7098, suitable for A.T.C Signals 660:1100 volts below ground level in existing or in trench, controller to junction box.) upto the entire satisfaction of engineer-in-charge. Make:- Polycab, Havells, Finolex. |
| 4 | Supply and Laying of cable 1.0 sq.mm,copper flexible 6 core cable as per IS 7098(junction box to lights), upto the entire satisfaction of engineer-in-charge. Make:- Polycab, Havells, Finolex |
| 5 | Providing and laying of HDPE pipe (120mm o/d) Grading PE 63, trench-less at required depth without obstructing the underground structures (For laying 1.5sqmm 12 core and 6 core cables as mentioned at serial no 1and2and3 and cat 6 cables etc.) threw this HDPE pipe to connect respective poles to control box). By Hydraulic Drilling Device/moiling without cutting of the road top surface at minimum 1.5 meter depth from the feeding point to the feeder pillar box in median (OR) from feeder pillar to respective traffic light pole including cost of all accessories for road crossing for laying of cables, complete in all respects including the cost of all required accessories closer cap, reducers for joining HDPE pipe of various sizes , bends etc. and bring the site in its original position, upto the entire satisfaction of engineer-in-charge. |
| 6 | Providing and laying of HDPE pipe (90mm o/d) Grading PE 63, trench-less at required depth without obstructing the underground structures (For laying 1.5sqmm 12 core and 6 core cables as mentioned at serial no 1and2and3 and cat6 cables etc.) threw this HDPE pipe to connect respective poles to control box). By Hydraulic Drilling Device/moiling without cutting of the road top surface at minimum 1.5 meter depth from the feeding point to the feeder pillar box in median (OR) from feeder pillar to respective traffic light pole including cost of all accessories for road crossing for laying of cables, complete in all respects including the cost of all required accessories closer cap, reducers for joining HDPE pipe of various sizes , bends etc. and bring the site in its orignal position, upto the entire satisfaction of engineer-in-charge. |
| 7 | Supply and erection of Solar system includng the cost of 2 Nos. battery 12 volt, 100AH, 1 No. solar charger controller 12/24 Volt, solar panel 12v/400 watt, structure for solar panel to be fixed on cantilever fixing,1No Inverter, MS iron water proof box for inverter and battery as per relevent IS/BS Standard,with foundation compelete in all respects including the cost of all required accessories such as clamps, power cables,etc. upto the entire satisfaction of engineerin-charge. Make:- Sukam, Microtek, Exide, Luminous,Amaron |
| 8 | P/F of camera based Vehicle Detector (for counting and Classification of vehicles) at each arm of the traffic junctions. The detector to be managed through web-based interface. The outputs of the detectors shall indicate the presence of vehicles and shall be used to influence the operation of the traffic signal controller and shall generate counts. Camera Sensor1/2.8-inch HD Mega pixel Highly sensitive CMOS Sensor–Monochrome Sensor pixel size and sensitivity- 3x3 um or better 4 .2 V/lux-sec or better Lens- M12 2.8mm, F1.2 ,Processor- ARM 9,400 MHZ, 128MB RAM , Power12v/3w,Housing- IP66 rated, Onvif-S,G,T and M. BIS,STQC certified Field of View -The camera should be able to see 20-25 meter down from a stop line when installed on a traffic signal pole. This will help to provide the queue length Upto 25 meters from stop line and to estimate speed of movement, compelete in all respects including the cost of installation of all required accessories such as cabels(CAT-6 armoured), clamps etc. to meet the end objective of the item,upto the entire satisfaction of engineer-incharge. Equivalent of required / approved brand as approved by competent authority. |
| 9 | Supply and Erection of 300mm dia Signal Heads of pure polycarbonate material with LED RED,GREEN ARROW AMBER retrofit kit , EN certified, CE as per EN-12368 complete in all respects including the cost of all required accessories such upto the entire satisfaction of engineer-in-charge. RED, AMBER,GREEN ARROW. Equivalent of required / approved brand as approved by competent authority . |
| 10 | Supply and Erection of 300mm dia Signal Heads of pure polycarbonate material with led retrofit kit , EN certified, CE as per EN12368 Pedestrian Green/Red Pedestrian compelete in all respects including the cost of all required accessories upto the entire satisfaction of engineer-in-charge. Equivalent of required / approved brand as approved by competent authority . |
| 11 | Supply and Erection of Microprocessor (16 bit) based full matrix on reverse countdown timer 320mm x 320mm display character heights 240mm for ATC signals to depict the timings of RED ,Green, Amber Timings independently display message STOP GO, Wait, Manual, ATCS etc as per EN12966,compelete in all respects including the cost of all required accessories upto the entire satisfaction of engineer in charge. Equivalent of required / approved brand as approved by competent authority. |
| 12 | Supply and Erection of vehicle actuated road traffic signal CUTE/ latest version controller of full configuration to function signal properly ,incasing in metallic control cabinet ( suitable to house Micro processor controller, master controller/ switching control) fixed on RCC foundation of required size and depth. It should be compatible with C-DAC ATCS Technology Microprocessor based controller including windows base software to be provided and installed along with control functioning (CF)system must have green signal conflictmonitor unit. Controller must have RS 232Serial communication Port for programming with provision for up gradation with GSMcommunication Later on with help of extraperipherals.Controller must function at leastin following 3 modes. The product shall beas per relevant ISS and ISO-900/2000compelete in all respects including the costof all required accessories upto the entiresatisfaction of engineer-in-charge. a) Manual mode ,b) Auto Mode multiple day plan mode, dayof the week and date of year.c) Vehicle actuated mode.The traffic signal control should beapproved by CDAC, Ministery ofcommunication and IT, Govt of India.Controller must have Solid state relay (SSR)with 50 Nos outputs for LEDS. Solids staterelay must be of 10 amps ratings withdouble pool MCB for incoming power andoutput plugs and Police Manual control boxwith the following controls are to beprovided as mentioned below.a) Auto / Manual select switch,b) Manual push button switch, c) Signal / flash select switch,d) Signal OFF switch(1 plus 1 plus 1=3 nos)(Note:- (1) No extra payment will be madefor metallic control cabinet and RCCfoundation for fixing metallic controlcabinet) (2). Traffic signal controller shall permitsetting of timings with locally and also giveaccess for remote control through Ethernet/IP/GSM/Wifi etc connectivity. The controller shall also provide IP interface tobring the signal to ICCC and monitoring and management, min 2 spare IP ports shall beavailable. Integration of traffic signals toICCC shall be responsibility of contractor. |
| 13 | Supply of Cantilever (6.5 plus 0.5) = 7 mtr.long Galvanized octagonal pole having topdia 100mm bottom dia 200 mm with a baseplate is 320 x 320 x 20mm. pole sheetthickness is 4mm, with a suitable arm of(0.5 plus 5.5) 6 mtrs with a thickness ofsheet 3mm having a top dia of 75mm,bottom dia 100mm, with suitable foundationaccessories nut bolts, J hooks, i.e. 25mmdia 4 nos 850mm along with junction boxin pole with steel rope) specification andsteel grading shall be as per BSEN 10025and relevant IS, compelete in all respectsincluding the cost of all required accessoriesupto the entire satisfaction of engineer-incharge. Make: Shiva, Kesper, Paruthi, JKM, Bonsai. |
| 14 | Switch 8 port 10/100 base T as per technical specifications The switch shall be industrial grade suitable for outdoor environment. Should provide 8 x 10/100/1000 Mbps ports for downlink out of which minimum 8 should be PoE/non PoE with injector(as required) and 4 should be SFP/GE ports, complete in all respect including the cost of all required accessories such as cable clamps etc. to meet the end objective of the item upto the entire satisfaction of engineer-in-charge. Make- Allied Telesis, Cisco, Fortinet, HP Please Enable Macros to View BoQ information |
| 15 | Providing and installation of Smart Traffic signals lights |
| 16 | [24.4.8.4]STREET LIGHT 8.4. Supply and erection of Hot Dip Galvanized octagonal pole of 3mm thickness, with base plate including cost of nut and bolts , earthing studs, Integral Cable termination arrangement 5 mm thick Bakelite base plate on suitable welded MS/GI bracket 32 A four way connector 2 no 10 A SP MCB , end cover and all accessories as supplied by the manufacture including Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @80 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge 6 Metre Long pole with top dia 75 mm and bottom dia 150 mm with base plate of size 275 x 275 x 16 mm [Through Rate] |
| 17 | [24.8.5]RCC FOUNDATIONS FOR OCTAGONAL POLES 5. Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @80 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge 7m high pole [Through Rate] |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
TodayNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender