Tender For Maintenance Of Residential Flats & Staff Quarters At Commonwealth Games Village. Sub Head : Repair Of Staff Quarters No. T-18/502, T-18/104,T-20/103, T-16/301, T-16/601 & T-16/701 For Handover To Allotees At Cwg Village
Tender Value
28.26 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
1 days left
EMD
56525
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Of Residential Flats & Staff Quarters At Commonwealth Games Village. Sub Head : Repair Of Staff Quarters No. T-18/502, T-18/104,T-20/103, T-16/301, T-16/601 & T-16/701 For Handover To Allotees At Cwg Village
BOQ
| Sl. No. | Item Description |
| 1 | Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. |
| 2 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red a) Area of slab over 0.50 sqm. |
| 3 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part 1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.a) 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws |
| 4 | Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade |, Type Il exterior grade 1S : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately).a) 18 mm thick |
| 5 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part 1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.a) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 6 | Providing and fixing 5.5 mm to 6 mm thick 1 side balancing HDHMR board factory pressed of approved brand etc. including necessary nails,screws etc. complete as per direction of Engineer-incharge. |
| 7 | Providing and fixing 19 mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS : 710 of approved brand boxes, shelves ,racks, almirah, cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-incharge. |
| 8 | Providing and fixing HDHMR 18 mm thick (for cupboard) including ISI marked slide-on hinges with necessary screws as per direction of Engineer in charge. |
| 9 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.a) 1.0 mm thick |
| 10 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. a) 100/125 mm |
| 11 | Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete.a) Size 75 mm |
| 12 | Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. |
| 13 | Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding window with necessary screws etc. complete. |
| 14 | Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per direction of Engineer- in-charge. |
| 15 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1cement: 4 coarse sand) |
| 16 | Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-in-Charge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately) |
| 17 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :a) One or more coats on old work |
| 18 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 19 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 20 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.a) With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 21 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.a) Two coats |
| 22 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead :a) Thickness above 10 mm up to 25 mm |
| 23 | Dismantling tile work in floors, roofs and wall laid in cement mortar including stacking material within 50 metres lead.a) For thickness of tiles 10 mm to 25 mm |
| 24 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 25 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 26 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : a)Kitchen sink with drain board 510x1040 mm bowl depth 225 mm |
| 27 | Providing and fixing Dual Flush Faceplate compatible with in wall tank or cistern tank complete as per directions of Engineer in charge. (Note : New Product brand and model should be matched with exixting item) |
| 28 | Providing and fixing white vitreous china extended wall mounting water closet of approved shape including seat cover, nuts, bolts and gasket etc. complete as as per the direction of Engineer-in-charge.(Note : New Product brand and model should be matched with exixting item) |
| 29 | Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.(Note : New Product brand and model should be matched with exixting item) |
| 30 | Providing and fixing Single handle bathroom sink faucet complete as per directions of Engineer in charge. (Note : New Product brand and model should be matched with exixting item) |
| 31 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates efc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) |
| 32 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. a) 15 mm nominal bore |
| 33 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size fixed with C.P. brass screws and washers complete as per direction of Engineer-in-charge. |
| 34 | Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete. |
| 35 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) a) With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 36 | Providing and fixing toilet paper holder :a) C.P. brass |
| 37 | Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. a) 25 mm diameter. |
| 38 | Providing and fixing solid plastic seat with lid for wall mounting water closet pan. The Lid must be Ready Latch Quiet-Close & round-front toilet seat complete as per directions of Engineer in charge. (Note : New Product brand and model should be matched with exixting item) |
| 39 | Providing & Fixing curtain rod end cap set including screws complete as per direction of Engineer-in-charge. |
| 40 | Providing and fixing Wall mounted spout complete as per directions of Engineer in charge. (Note : New Product brand and model should be matched with exixting item) |
| 41 | Providing and fixing Bath and shower valve trim complete as per directions of Engineer in charge. (Note : New Product brand and model should be matched with exixting item) |
| 42 | Providing and fixing rainhead shower arm complete as per directions of Engineer in charge. (Note : New Product brand and model should be matched with exixting item) |
| 43 | Providing and fixing PVC legs for shelves/cabinets as per direction of engineer in charge. |
| 44 | Providing and fixing wooden door profile/reducer complete as per direction of engineer in charge |
| 45 | Providing and fixing Side inlet fill valve for WC cistern/concealed cistern, complete with float mechanism, adjustable water level control and necessary fittings, suitable for controlled and quiet refilling of the cistern complete as per direction of engineer in charge |
| 46 | Providing and fixing Flush Valve Assembly for Concealed Cisterns fitting complete as per direction of engineer in charge. (Note : New Product brand and model should be matched with exixting item) |
| 47 | Providing and fixing C.P. brass Two way angle valve of approved quality conforming to IS:8931 as per direction of Engineer in charge |
| 48 | Providing and fixing showerhead complete as per directions of Engineer in charge. (Note : New Product brand and model should be matched with exixting item) |
| 49 | Repairing of existing aluminium sliding door including removing the door from the frame, removing damaged wheels/rollers, providing and fixing new wheels/rollers of approved make and suitable size, cleaning and clearing of track/channel, refixing and adjusting the door in position on the existing track, testing for smooth and proper operation and making good all necessary adjustments, complete in all respects as directed by the Engineer-in-Charge. |
| 50 | Providing carpenter for miscellaneous work as per direction of Engineer-in-charge. |
| 51 | Providing Beldar for miscellaneous work as per direction of Engineer-in-charge. |
| 52 | Dimantling wooden flooring, removing and stacking dismentled wooden flooring within 50m lead as per direction of Engineer-in-charge. a) upto 25 mm thickness |
| 53 | Providing and fixing In wall tank shut off valve for cistern as per direction of Engineer-in-charge. (Note : New Product brand and model should be matched with exixting item) |
| 54 | Providing and fixing skirting with Pre-laminated medium density fibre board exterior grade (Grade-I) conforming to IS: 14587:1998 marked, with (one side decorative and other side balancing lamination and edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. all complete.a) 18 mm thick. |
| 55 | Providing and laying 8mm thick AC-4 High density fibre board laminated flooring in required shade of Pergo, Krono, Action tesa, vista & flortex make as per approved sample in the size of panel 1214mm (L) x 193mm (W) with density 900kg per/cum, double locking system with edge sealed with moltex wax laid over 2mm thick PU foam & 0.2mm thick PE sheet etc. complete as per manufacturer specification & direction of Engineer-in-charge. |
| 56 | Providing & fixing 12mm thick frameless toughened glass for courtyard & balcony railing of approved brand & manufacture i/c allnecessary fitting completeas per direction of Engineer-in-charge. |
| 57 | Providing and fixing Health faucet complete as per directions of Engineer in charge. (Note : New Product brand and model should be matched with exixting item) |
| 58 | Providing and fixing bright finished brass mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete as per directions of Engineer in charge. |
| 59 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 60 | GST correction factor @ 2.7 % = |
| 61 | Add 3 % C.I = Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender